Thanks for the video! I really appreciate anybody who is creating content on this subject! For your safety, on the table saw, you should not ever leave small pieces of material between the blade and the fence. That piece can get launched at you at really high speed and do a ton of damage. The safest way to do this is with a cross cut sled.
ABSOLUTELY TOP NOTCH INFO!!! seriously you should make more vidoes this is by far the best video and info and technique out there, i have spent 2-3 hours a day for the last week trying to find this info and its all here in one place step by step with basic tools, well done sir well done
For all you folks who value you little fingers or big fat fingers. Fingers of all sizes dont really matter im going to give you a very valuable piece of advice!!!! DO NOT WEAR GLOVES OF ANY KIND OR LOOSE FITTING LONG SLEEVE SHIRTS ON ANY MACHINES YOU FIND IN A MACHINE SHOP EVER!! MILLS, LATHES ( SHOULD BE A NO BRAINER?, DRILL PRESS. Some things ok say a CNC. Be Smart if theres even a 1% chances you could get caught in a machine dont do it. A lathe with rip your arm off and could kill you. Drills will rip hands off!! Follow these rules keep your 🙌👍🤙
I don't know how this got to be on my feed, I've been searching for "Rocky and Bullwinkle" cartoons, and this popped up. Thinking this might be a previously unknown animation, I watched the whole thing....now I have the know-how to make a suppressor, but I have no need for it, because I lost all my guns in a tragic boating accident years ago. Oh me oh my, whatever should I do with this esoteric knowledge? How will it help me with the search for more Rocky and Bullwinkle cartoons?! I don't know. I just have to take things day by day. 🤠
very nicely done!!! Does the alignment of the baffels matter after doing the DHC. (EG Baff1 clocked 0 Baff 2 clocked +45or90deg Baff 2 clocked +90or135 Baff 3 etc) Being that the cuts are symmetrical I would think no.....
I am curious. Does it matter if the clipped baffles are all aligned all the way down the bore? I am doing a Modular suppressor which I just received approval on my form 1 via the ATF filing individual and electronically. Applied Aug 18th and approved Nov 11th (about 3 months) What do I do with my suppressor as far as clipping the baffles? I have the KM Whisper 7.8” stainless steel modular solvent trap kit. I was able to get it drilled on my drill press with a jig but I’m curious as to how I should clip the baffles. I don’t believe there is any way to align them all perfectly once they’re all put together. Any idea, suggestions or knowledge someone could share on this would be awesome
Aligned asymmetric 👍… also, a straight line marked down the entire outside of all baffles tightened to how they’ll be, will give a decent reference for clips
Seriously bro? Its in the video text and in the video description. Same as my other videos lol people asking where I got the parts. Read the info in video description lol.
@@garystuckogh7861 can't remember what other videos have used, maybe something to do with oil filter or something but they brought the baffles loose!! Edit, ak custom, used a fuel filter.
Most of these links have been removed from youtube and amazon, what caliber was this for as I am trying to follow it for a 22lr can but don't want to order parts until I am sure. thanks!
I am assuming these are aluminum? What about stainless or Ti baffles? It's not so easy using a drill press. Wondering if you have any insight on working with stainless or Ti?
Yes, we do have videos of it, but I am retiring from everything, to old and health, my buddy is taking over everything, head over to his channel: ua-cam.com/channels/S5XUN3Kw5PDQCOl_mZ0CEg.html
What's illegal about this?..this is informative for people who want to build there own suppressors on form 1 instead of buying practically the same thing from some name brand company for $800-$1000
Thanks for the video! I really appreciate anybody who is creating content on this subject!
For your safety, on the table saw, you should not ever leave small pieces of material between the blade and the fence. That piece can get launched at you at really high speed and do a ton of damage. The safest way to do this is with a cross cut sled.
ABSOLUTELY TOP NOTCH INFO!!! seriously you should make more vidoes this is by far the best video and info and technique out there, i have spent 2-3 hours a day for the last week trying to find this info and its all here in one place step by step with basic tools, well done sir well done
One of my favorite Maná songs in the intro. Nice.
For all you folks who value you little fingers or big fat fingers. Fingers of all sizes dont really matter im going to give you a very valuable piece of advice!!!!
DO NOT WEAR GLOVES OF ANY KIND OR LOOSE FITTING LONG SLEEVE SHIRTS ON ANY MACHINES YOU FIND IN A MACHINE SHOP EVER!!
MILLS, LATHES ( SHOULD BE A NO BRAINER?, DRILL PRESS.
Some things ok say a CNC.
Be Smart if theres even a 1% chances you could get caught in a machine dont do it.
A lathe with rip your arm off and could kill you. Drills will rip hands off!! Follow these rules keep your 🙌👍🤙
I don't know how this got to be on my feed, I've been searching for "Rocky and Bullwinkle" cartoons, and this popped up. Thinking this might be a previously unknown animation, I watched the whole thing....now I have the know-how to make a suppressor, but I have no need for it, because I lost all my guns in a tragic boating accident years ago. Oh me oh my, whatever should I do with this esoteric knowledge? How will it help me with the search for more Rocky and Bullwinkle cartoons?! I don't know. I just have to take things day by day. 🤠
Good Job dude! keep it up. Love seeing new techniques like this
Good job sir 💯
Thank you Sir.
Where you get the baffles from
Where do you buy the baffles?
very nicely done!!!
Does the alignment of the baffels matter after doing the DHC.
(EG Baff1 clocked 0 Baff 2 clocked +45or90deg Baff 2 clocked +90or135 Baff 3 etc)
Being that the cuts are symmetrical I would think no.....
Being that they are symmetrically clipped it doesnt matter. if it was single (asymmetric) clipped then they would need to be oriented.
I am curious. Does it matter if the clipped baffles are all aligned all the way down the bore? I am doing a Modular suppressor which I just received approval on my form 1 via the ATF filing individual and electronically. Applied Aug 18th and approved Nov 11th (about 3 months)
What do I do with my suppressor as far as clipping the baffles? I have the KM Whisper 7.8” stainless steel modular solvent trap kit. I was able to get it drilled on my drill press with a jig but I’m curious as to how I should clip the baffles. I don’t believe there is any way to align them all perfectly once they’re all put together. Any idea, suggestions or knowledge someone could share on this would be awesome
Aligned asymmetric 👍… also, a straight line marked down the entire outside of all baffles tightened to how they’ll be, will give a decent reference for clips
You think DuHiC's are the way to go for
Rimfar?
Killer DIY,
Thanks!
Anyone have a link to the end-mill carbide cutter and what size? Thanks in advance
Where are the links for the end mills?
What drill press at what rpm when using the end mills? Curious if a cheap harbor freight or northern tool drill press will work.
Im sure it will
Nice job!
Where did you buy the baffles to begin with?
Seriously bro? Its in the video text and in the video description.
Same as my other videos lol people asking where I got the parts. Read the info in video description lol.
@@garystuckogh7861 It's not there..
I guess you have to buy some place, but he aint saying, and he aint talking either...lol
Any estimate on how durable it will be? Can anyone with a good garage make that or does one need a special license?
Its stainless steel so it will be very durable. Its whats used by the big pro companies.
@@garystuckogh7861Will aluminum work? I can't find stainless anymore because all the unconstitutional bullshit!t...
Quite expensive baffles. Really nice work thou!!
I have looked for cheaper ones, but the closest I found was aluminum ones for around the same price.. SS is so much better.
@@garystuckogh7861 can't remember what other videos have used, maybe something to do with oil filter or something but they brought the baffles loose!! Edit, ak custom, used a fuel filter.
OIl filters are crap
@@garystuckogh7861 I did just edit it, have a look, it's almost a suppressor out of the box, not like your movie oil filter aha
Sorry dude but you make no sense at all. You got some very poor english man.
Most of these links have been removed from youtube and amazon, what caliber was this for as I am trying to follow it for a 22lr can but don't want to order parts until I am sure. thanks!
here you go www.xrttactical.com/
I am assuming these are aluminum? What about stainless or Ti baffles? It's not so easy using a drill press. Wondering if you have any insight on working with stainless or Ti?
your amazon link for the main tube dos not work
Here you go www.xrttactical.com/
what do these cuts do for the user?
How well did it test? also, do you have a video of it in testing?
Yes, we do have videos of it, but I am retiring from everything, to old and health, my buddy is taking over everything, head over to his channel: ua-cam.com/channels/S5XUN3Kw5PDQCOl_mZ0CEg.html
Damn! Mine warnt squre! Kiddiing.
How well did that clip design work? And what cal do you use with it? nice video too!
What size drill bit would you recommend for making these clips on a .30 cal ?
3/8”
What the purpose result of the vent?
It makes for better suppression than straight unclipped cone baffles
Where's Rusty these days?
You really shouldn't be wearing gloves while operating a drill press. It's not pretty when the glove gets caught in the bit.
You are kidding. Where You lost the precision?
Incredibly unsafe use of the table saw. Holy crap. Read a book.
I enjoyed that stupid background music way too much.
0
Would have watched the video but the music sucks and was really not needed. Thumbs Down
That was a joke right?
As a person who has inside knowledge of making an illegal item....this is good info if u know the other steps...like i do
Drill 2 holes on both sides of each cup 4 ventilation. If not it will explode in ur face😰🙏
What's illegal about this?..this is informative for people who want to build there own suppressors on form 1 instead of buying practically the same thing from some name brand company for $800-$1000
Mike Collins What makes you think this is illegal?
This is not illegal at all bro! It is regulated, but not illegal
uuhhhh.... no. Looks like you need some more knowledge in this stuff if your saying that