Making a Awesome Lathe Tool
Вставка
- Опубліковано 29 лип 2023
- Learning to make lathe tool very fast & very easy .
Please comment your opinion on this Lathe tool and don't forget to like , subscribe , share & press the bell button if you enjoy the content .
thanks for watching .
Nicely made , I'm always looking for something useful to make so I'll make myself one of those . Thank for giving me the idea .
I like how you used a circlip in the jaw grooves, genius. Nice end result 👏👍
cracking little instruction video...I can't believe I hadn't thought of doing this ...thankyou for sharing
you're welcome ❤️
Thanks
Also, you get pretty dang creative with a lathe!! Bravo sir!
Thanks a lot ❤️
Привет.Отличное видео.Каким инструктор вы делаете термообработку?Это самодельная горелка?
Informative👍👏
The snap ring was a good idea I have to use it thanks for the tip and a great job to
you're welcome ❤️🙏
Some good tips in there. Instinctively it looks like the clamp holds down the back rather than the toe of the clamp. But hey if it works it works.
Thanks a lot 🙏❤️
کارت یه دونه است استاد🎉
Отличная работа! Лайкнул! Я тоже такой сделаю!
Thanks
А где взять такие пластины?
Looks like you should make an auto hacksaw next vid! lol.
Great build though, thanks for sharing!
😅
Excellent work 👍👍👍. Thank you for sharing. Be safe 🇨🇦
Perfect tool 👍👍👍
Thanks 🙏❤️
Good work!!
Thanks ❤️
Ficou top.
Thanks a lot ❤️
چه کار زیبا و فوق العاده ای توسط یک حرفه ای بزرگ👌
Ha gi nahor
@@metallantik 😅😅
nice job
very good Congratulations.
❤️🙏
عالی و کاربردی😍
Superbe travail !
Le tour, outil complet,
Tour/Fraiseuse...
Merci pour la démonstration !
(et sans "musique"...)
❤️🙏
well done, thank you
🙏
Very nice tool and amazing work
Thanks a lot ❤️
@@metallantik welcome ❤️❤️
@@metallantik welcome
👍👋good works.
Thanks ❤️🙏
schon perfect 👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻
Te felicito por tus herramientas pero te recomiendo para el portainsertos darle un ángulo de unos 7° de incidencia para que te funcione mejor y esos buriles de tungsteno son una maravilla para muchos tipos de acero incluso templados trabajan muy bien yo los llegué a usar .
Thanks a lot bro 🙏❤️
super cool
❤️
What exactly is the toolbit material?
Пора изготовить ключ для резцедержателя ! Успехов !
🙇🙏❤️
anyone know the part number of the carbide tool?
The idea is good! I would like to note that the cutter needs to be sharpened on a diamond wheel. And with the fastening mechanics, not everything is good either - on the opposite side of the fastening pad bolt you need a good protrusion - a stop. A flat washer is not a solution.
Thanks for the tip ❤️🙏
echt krass 😍
Ich danke dir ❤️
Very interesting. Nice work
Thanks a lot ❤️🙏
So good ii boss 👍👍
dove si possono trovare le placchette io non le ho trovate......
It's so cumbersome to do this all in a lathe. A mill makes this way easier.
God👏👏👏👏😘😍👊
Nice😍
Akhari ro bebin 🥲
Vejdanan jlo naze kanal vazesh khoub nist
Which oil do you use to make it stronger?
It is better to use an oil that has a higher instantaneous flash point because this reduces the possibility of a fire.
I was also told to use old engine oil back in the day for oil blacking.
We did this in the training school for the tools we made.
I think the process is now discouraged due to the carcinogens given off during quenching, it worked well though.
Why the saw instead of a cut off tool 🤷🏾♂️
Black caler ka kay tha
Super Blue
❤super I went oan
❤️🙏
bagus banget ,,,,
🙏
Best Carbide bit name please
❤️🙏
Лучше бы ключик для резцедержатиля сделать...
Thanks a lot❤️🙏
🎉
❤️
Lathe tool holder.
👌
Для чего ты показываег это ......,?
Ten nóż tokarski nie będzie działał prawidłowo, ze względu na błędne kąty ostrza. Jest zerowy kąt przyłożenia, a powinien być ok. 7... 10 stopni. Oczywiście ta płytka jest przystosowana do ujemnych kątów natarcia, co dla amatorskiego wykorzystania nie jest dobre. W ogóle żeby nóż skrawał, płytka powinna być pochylona (czubek obniżyć). Brak też podparcia płytki (za dużo wystaje, więc pęknie w pracy). Płytka dociskowa niewłaściwie dociska płytkę z węglika (powinna na zasadzie dźwigni).
Najprostsze wyjście z tego, to spód noża ściąć w klin (pod płytką zebrać ok. 4mm, a na końcu noża zero. Powinien skrawać o wiele lepiej.
Pozdrawiam. (jak potrzeba, to podpowiem)
Thank you for the tips, I will definitely correct it 🙏❤️🙇
Dude! Buy a real hacksaw!
I can't even express on how many levels this was wrong...and for a totally useless tool as well