I've been trying to work out how to remove the plastic outer seal and collar for hours to replace the interlock. Took 30 seconds after watching this. You sir just saved me again from the repair man. Thank you.
2:55 was the golden piece of this video for me, using a bit of dishwashing soap and it went from completely impossible to slips on in a couple of seconds. Excellent information!
@@eSpares I had to replace the entire drum assembly (broken spider arm) so everything in the machine had to come out (it was not "economically viable" to have it repaired by someone since the labor would've cost more than a new machine), but I took it apart to diagnose it myself (and determined that all the other components were in pretty good shape aside from a scratch where the original drum hit the tub, even the heating element had almost no limescale on it) and now it's all back together and working again without any leaks, because I re-used the original seal that didn't have any lube I just couldn't get it on, without that little tidbit of info I couldn't have done it. Thanks again!
If only I had watched this video first! I bought a new door seal but I found that the drain holes in the seal were clogged. Clearing them has fixed my problem!
Thank you so much! I followed the video to replace a seal in my washer-dryer. A bit trickier, but I got there in the end and the washer-dryer is back in action!
Hi Michael, thank you for your comment. Great to know our video is going to help you to fix your washing machine yourself! Well done for repairing your appliance instead of replacing it.
Well done Grant, If your old seal was full of mould and muck to prevent this reoccuring see another one of our videos: ua-cam.com/video/ifWK9df1qgg/v-deo.html
I found fitting the new seal to the dru9m the most frustrating job I've done in my 72 years of life. I'm very practical and been trying to fit the seal for 4 hours now and still not there yet. Unless you can see the guy in the video fit the complete circumference of the seal, think twice, you get 90% fitted and it pops off somewhere else. I even have it clamped. Pay someone else to fit it and make sure it's a fixed price. Mike P.
Is there a companion video that explains how to retrieve a nut driver from the bottom of the washing machine, after dropping it trying to unbolt the inner seal?
+TooSlowTube Many hoover machines have a cover used to reduce noise. This can be seen being removed in a similar video: ua-cam.com/video/w9Fd8NWXa0A/v-deo.html
+eSpares Thanks. Yes, I can feel something similar at the bottom of mine. I've got a Candy DQW1500, but the door seal is very similar to the Hoover in this video. The inner retainer band thing has a hex head bolt though, instead of a Philips head. Up until the point where I dropped the nut driver, it was going fairly smoothly... I tried using a magnetic pick up tool, but it just keeps grabbing onto the sides and other bits of the machine. I can't see where it went to, so it's a bit of a non starter. I think I might leave it all til another day.
My door seal wont go back on. The draw to drum water pipe came loose/uncapped from drum so thought removing door seal would give me better leverage to get to it. Now can't put seal back on as keeps popping off from opposite side. Any tips. Already used little bit squeezy.
Simon Dodd Sounds like you need a third hand. Make sure the seal is fully pushed in to the lip of the drum or front panel before tying to pull over the last part and get the seal on before trying to fit the clamp band. Good luck. :-)
Hi. I've watched your video multiple times now and I'm sure I've fitted the seal properly, but the seal is rubbing on the washer drum. Is this normal or could I have done something wrong?
If a wash loads is not balanced on spin the forces produced can flex the drum and cause it to contact the seal. If this has happened it may have caused the rim to wobble close and away when spun by hand. You can use a screwdriver to lever the gap larger or tap with a mallet from inside to reduce a gap. Often a little contact will quickly wear a groove in the seal preventing further contact.
During a recent wash the seal around the front came off and a top of mine got stuck around it. I managed to remove this but there's a couple of gaps im unsure if this is damaged because of the clothing and it coming off or its meant to have these? Also what is the right way to put the seal in as i have no idea whats the front or the back? Thanks
Generally the seal has a bit of a pocket/large channel on one side with holes in them, that goes towards the drum as it allows water to flow back into the drum (or to drainage pipes if your washer model has them) if it splashes against the glass window. There are also two ridges, one on each side of the seal that hold the retaining springs. Generally the thinner ridge (that holds a metal hoop with a spring holding tension) goes against the machine body and thicker ridge (with either a thicker metal hoop or just a large spring) goes around the tub.
@@natashamarples6468 just make sure you clean any channels in the seal (it's much easier when it's off) and lube both ridges up with some dishwashing soap before trying to put it back on, it will be nigh impossible to get it back on without it and you might need replacement springs/hoops if it just came off as it isn't supposed to do that. If the holes are neatly rounded they are probably original but if it's a tear or some other weird shape it might need replacement. Just make sure you don't see obvious damage and maybe put the machine in a basin so if it leaks it doesn't destroy the floor of whatever it is on. Good luck!
G'day mate would you have any advice on how to get the pully of an older Hoover front load. I'm trying to salvage the bowl. It's one with a massive cement ballast in it.
Hi do i need to remove the top of washing machine to do this, i cant pull my machine out without removing half my kitchen. I need to replace the seal can it it work without the inner retaining band or will it just come loose? I have a candy Grand Vita
Hi, thanks for your comment. While we can't confirm whether there is an alternate method for your particular model, you are correct that the seal will be loose if the inner retaining band is not fitted, so this is an essential part of the process...as if not the possibility of leaks will occur.
Hi Chris, It is possible to replace some seals without removing the top. The one in this video uses a clamp that is screwed up to hold onto the drum. It may be possible to remove this clamp through the front but is likely to be very difficult.
Hi, I know all hoover washing machines may not be the same. but what size is the socket needed to remove the 3 screws at the back of the top panel? Thanks in advance
Hi Mr Clayhead. We would recommend using our Torx set for all your appliance repairs. Please click the link below: www.espares.co.uk/product/es1251179/9-piece-torx-head-screwdriver-set
+Samantha Johnson We do not have access to all Hoover models to be able to confirm this but it is likely to be the same or at least very similar for most machines.
Yes all hoover machines can be changed via the door cavity and working through that and the lid. The most difficult to do are washer dryers, however these are done in the same fashion, just a little bit more tricky as less room to work, and have to reconnect the gasket to the drying chamber again properly. No machine unless designed in the last 2 years is different for Hoover or Candy. (I am a former hoover engineer) They can be tricky, none are hard and they are all this straight forward. Just the nack is needed to make it speedy,
I'd like to point out that I have a hoover dynamic next and the metal ring that holds the inner part on is not screw fix, it's a spring...... and it's a complete pig.... Took me ages to do this because the seal doesn't fold inside the drum and stay there without pulling off the rim.... So I had to get my wife to hold the rubber seal out of the way to allow me to get the metal ring into place.....My neighbours learned some new swear words though.... repeatedly. Once the inner ring is secured, the rest of it took about 3 minutes..... So frustrating..
Hi Rob, thank you for your comment and we understand that different models will be designed differently, we are glad you managed to do it so well done.
Hi Tone wareham, you have to make sure when refitting the strap that it goes into the teeth correctly then when you push it together it will tighten itself.
My washing drum does not seem to be moving I put the outer ring back on as that is what fell out but the washing drum does not seem to be moving please help
Hi Wassim, make sure when putting the new seal on use some washing up liquid as this helps it go on much easier, take your time and watch the video a couple of times to get the knack of how to do it.
What part are you having difficulty with?. The seal has a gap that goes over the rim of the drum and another gay that goes over the rim on the front panel.
3:19 'you can then work the lip round the rim of the drum itself.' No you cant. You can't work the lip round the rim of the drum itself. It's impossible. I've been on it for 2 hours.
Hi, we were referring to fitting the seal around the lip on the outer tub not the inner drum. If you look at the seal itself there should be a tight gap that will part allowing the inner edge to go inside the drum opening and the outer rim of the gap then pushes over the lip on the outside of the tub. Fitting can be difficult so it is important to ensure this 'gap' is lubricated' with the liquid soap to help it slip over the rim as you work it around. For a quick practice see how the outer lip fits and feels as you work this onto the front panel. Once you have got the hang of this take the front lip off again and retry with the seal to the tub. When retrying fitting to the tub I find it easier to start at the top and work one side down then the other as gravity can help the seal hold onto the lip. Good luck.
eSpares I agree this is impossible, using liquid soap has any made it worse as rubber keeps slipping off. you need more hands than an octopus. Also the video is so misleading, only a matter of seconds to fit the inner seal? more like hours. Complete disaster.
I took me a long time too, until I realised I was doing it wrong. The seal, in fact, has a kind of a "pocket" that needs to fit around the metal lip of the drum and the door opening really snuggly - but it is possible.
I agree, it really needs two people, one to hold the seal in place at the top and the other to work it round. But we managesd in about ten minutes. Saved a fortune. Thanks for the video.
hoover dxc cd49w3 model here . This could be the worst guide ever existed ,what a joke .Its funny how you think the rubber just ''stays there '' waiting for you to finish rounding it up .Then you SOMEHOW manage to get the spiral seal which is impossible to do so the lower part where is no space to move even a baby finger . Never again a hoover ,never again changing parts .
Soory, got to mention that the nice, easy inner retainer is NOT nice and easy like yours. It is a little bitch piece of wire with a spring connecting the two ends. It takes two people, a piece of STRONG string, and two pairs of needle-nosed pliers, and a lot of swearing!
Thanks for the comment and sharing your experience. Unfortunately sometimes the easy things become the hardest but we're glad you never gave up and got the job done in the end :)
Hahahaha :-) I am a former hoover engineer, I work on all brands now :-) I am just imagining what you guys were doing and how you were using the tools and string hahaha :-) Its easy when you know how, same with all professions :D You can work stuff out in the end, however the "nack" that professionals have is overlooked sometimes lol. I assure you it can be done quickly with just your hands, and one of you. You just goto be confident and firm and have the nack :-p
I've been trying to work out how to remove the plastic outer seal and collar for hours to replace the interlock.
Took 30 seconds after watching this.
You sir just saved me again from the repair man. Thank you.
Hi Matt, thank for letting us know as it makes our day when our videos help.
2:55 was the golden piece of this video for me, using a bit of dishwashing soap and it went from completely impossible to slips on in a couple of seconds.
Excellent information!
Hi, thanks for your comment here, glad our advice has helped you out! Well done for completing the fix yourself.
@@eSpares I had to replace the entire drum assembly (broken spider arm) so everything in the machine had to come out (it was not "economically viable" to have it repaired by someone since the labor would've cost more than a new machine), but I took it apart to diagnose it myself (and determined that all the other components were in pretty good shape aside from a scratch where the original drum hit the tub, even the heating element had almost no limescale on it) and now it's all back together and working again without any leaks, because I re-used the original seal that didn't have any lube I just couldn't get it on, without that little tidbit of info I couldn't have done it. Thanks again!
Absolute bollox! Getting that inner lip on is impossible!
Just tried fitting the inner lip 400 times... I'm about to smash the house up
dzięki, dałem radę, ale zajęło mi to razem z przeklinaniem 2 godziny :)
If only I had watched this video first! I bought a new door seal but I found that the drain holes in the seal were clogged. Clearing them has fixed my problem!
Hi GuzziHero, at least you have sorted it and always look at eSpares for the videos you need.
Thank you so much! I followed the video to replace a seal in my washer-dryer. A bit trickier, but I got there in the end and the washer-dryer is back in action!
Hi Lilia, thank you for your comment and well done on fixing it yourself.
Thank you very helpful videos thanks
Hi, thanks for your comment, we are glad to hear that you found our video so helpful!
thanks for the demo the 5 minute video makes it seem like a quick job which it wasn't but it did help many thanks!
Hi Shaun, the video is edited b so might seem shorter than it is but well done on fixing it yourself.
Thanks for a great easy to follow video, Just ordered the part which will save me a €150 repair bill : )
Hi Adrian, glad the video helped and it made our day that you are saving money.
Thank you Mat, that was a great help.
Hi Michael, thank you for your comment. Great to know our video is going to help you to fix your washing machine yourself! Well done for repairing your appliance instead of replacing it.
Thank you so much for the great video! Ive just replaced the seal on my Hoover OPH 616 following your instructions!
Well done Grant, If your old seal was full of mould and muck to prevent this reoccuring see another one of our videos:
ua-cam.com/video/ifWK9df1qgg/v-deo.html
Thanks for the advice. I will definitely consider you for any spares in the future. Thanks again and keep up the good work 👍
Thanks for the comment. Glad we could help :)
That was excellent and brilliantly presented thank you very much
Thanks Willisshooting we hope all went well.
Just off to order a seal from you... Thanks for making the video - it got you another sale :-)
Thanks for the comments, glad we have helped.
Awesome video thank you very much
Hi Liam, thanks for your comment here, and we are glad that our video was helpful. Hope you have your washing machine fixed now.
@@eSpares all sorted, cheers 👍
Very good instruction, works perfectly with my hoover DYNS-7104. Thanks
Hi Francesco, glad the video helped.
another excellent video
Thanks for the comment Joelombrdo.
Thank you very much..
Hi, thanks for your comment. We hope our video has helped you to fix the door seal on your washing machine, and that it is working okay
Great video, thanks!
+Gary Maguire Thanks Gary.
Top man great video
Hi Andy, thanks for the nice comment and remember to keep watching.
thumps up mate. just a new carrier for me. cheers
Hi Papa, thank you for the comment and glad we could help.
good job............. thanks
Hi Shariful, thank you for the praise have a great day.
I found fitting the new seal to the dru9m the most frustrating job I've done in my 72 years of life. I'm very practical and been trying to fit the seal for 4 hours now and still not there yet. Unless you can see the guy in the video fit the complete circumference of the seal, think twice, you get 90% fitted and it pops off somewhere else. I even have it clamped.
Pay someone else to fit it and make sure it's a fixed price.
Mike P.
great thanks. just done it.
+harrylime22 Hope it all went well.
Is there a companion video that explains how to retrieve a nut driver from the bottom of the washing machine, after dropping it trying to unbolt the inner seal?
+TooSlowTube Many hoover machines have a cover used to reduce noise. This can be seen being removed in a similar video:
ua-cam.com/video/w9Fd8NWXa0A/v-deo.html
+eSpares Thanks. Yes, I can feel something similar at the bottom of mine.
I've got a Candy DQW1500, but the door seal is very similar to the Hoover in this video. The inner retainer band thing has a hex head bolt though, instead of a Philips head.
Up until the point where I dropped the nut driver, it was going fairly smoothly... I tried using a magnetic pick up tool, but it just keeps grabbing onto the sides and other bits of the machine. I can't see where it went to, so it's a bit of a non starter.
I think I might leave it all til another day.
+TooSlowTube Good luck with the repair.
My door seal wont go back on. The draw to drum water pipe came loose/uncapped from drum so thought removing door seal would give me better leverage to get to it. Now can't put seal back on as keeps popping off from opposite side. Any tips. Already used little bit squeezy.
Simon Dodd Sounds like you need a third hand. Make sure the seal is fully pushed in to the lip of the drum or front panel before tying to pull over the last part and get the seal on before trying to fit the clamp band. Good luck. :-)
Any vids on how to change a Bush door seal?...
Hi Matt, we do not have any videos on a bush but this video would be similar to the replacement of the seal.
Hi. I've watched your video multiple times now and I'm sure I've fitted the seal properly, but the seal is rubbing on the washer drum. Is this normal or could I have done something wrong?
If a wash loads is not balanced on spin the forces produced can flex the drum and cause it to contact the seal. If this has happened it may have caused the rim to wobble close and away when spun by hand. You can use a screwdriver to lever the gap larger or tap with a mallet from inside to reduce a gap. Often a little contact will quickly wear a groove in the seal preventing further contact.
During a recent wash the seal around the front came off and a top of mine got stuck around it. I managed to remove this but there's a couple of gaps im unsure if this is damaged because of the clothing and it coming off or its meant to have these? Also what is the right way to put the seal in as i have no idea whats the front or the back? Thanks
Generally the seal has a bit of a pocket/large channel on one side with holes in them, that goes towards the drum as it allows water to flow back into the drum (or to drainage pipes if your washer model has them) if it splashes against the glass window.
There are also two ridges, one on each side of the seal that hold the retaining springs. Generally the thinner ridge (that holds a metal hoop with a spring holding tension) goes against the machine body and thicker ridge (with either a thicker metal hoop or just a large spring) goes around the tub.
@@bami2 Thank you so much. I'll give this a try :)
@@natashamarples6468 just make sure you clean any channels in the seal (it's much easier when it's off) and lube both ridges up with some dishwashing soap before trying to put it back on, it will be nigh impossible to get it back on without it and you might need replacement springs/hoops if it just came off as it isn't supposed to do that.
If the holes are neatly rounded they are probably original but if it's a tear or some other weird shape it might need replacement. Just make sure you don't see obvious damage and maybe put the machine in a basin so if it leaks it doesn't destroy the floor of whatever it is on.
Good luck!
G'day mate would you have any advice on how to get the pully of an older Hoover front load. I'm trying to salvage the bowl. It's one with a massive cement ballast in it.
There are many different types of tub so with out a full model number we are sorry but cannot advise.
Hi do i need to remove the top of washing machine to do this, i cant pull my machine out without removing half my kitchen. I need to replace the seal can it it work without the inner retaining band or will it just come loose? I have a candy Grand Vita
Hi, thanks for your comment. While we can't confirm whether there is an alternate method for your particular model, you are correct that the seal will be loose if the inner retaining band is not fitted, so this is an essential part of the process...as if not the possibility of leaks will occur.
@@eSpares thank you. I should've known there's no short cuts
Hi. could this also be done without removing the top? thanks
Hi Chris, It is possible to replace some seals without removing the top.
The one in this video uses a clamp that is screwed up to hold onto the drum.
It may be possible to remove this clamp through the front but is likely to be very difficult.
Hi, I know all hoover washing machines may not be the same. but what size is the socket needed to remove the 3 screws at the back of the top panel? Thanks in advance
Hi Mr Clayhead. We would recommend using our Torx set for all your appliance repairs. Please click the link below: www.espares.co.uk/product/es1251179/9-piece-torx-head-screwdriver-set
It needs a 7mm socket not a torx on my Hoover 7kg one touch.
Hi Marc, thank you for the post and good correction and thanks for helping with the information.
It is impossible to refit the inner seal I have lubed it stretched it everything. Been trying for over a week it’s simply to small for the drum.
Hi sir, I have a model of Hoover with a small mouth connection on the top right. Do i have to align it?
Hi SpaceLion87, you would need to fit it back the same way it came off, most seals are aligned so check yours before you replace it.
please could you tell me do these instructions work on all models of hoover washing machine ?
+Samantha Johnson We do not have access to all Hoover models to be able to confirm this but it is likely to be the same or at least very similar for most machines.
Yes all hoover machines can be changed via the door cavity and working through that and the lid. The most difficult to do are washer dryers, however these are done in the same fashion, just a little bit more tricky as less room to work, and have to reconnect the gasket to the drying chamber again properly. No machine unless designed in the last 2 years is different for Hoover or Candy. (I am a former hoover engineer) They can be tricky, none are hard and they are all this straight forward. Just the nack is needed to make it speedy,
Thanks for the comments Jason.
I'd like to point out that I have a hoover dynamic next and the metal ring that holds the inner part on is not screw fix, it's a spring...... and it's a complete pig.... Took me ages to do this because the seal doesn't fold inside the drum and stay there without pulling off the rim.... So I had to get my wife to hold the rubber seal out of the way to allow me to get the metal ring into place.....My neighbours learned some new swear words though.... repeatedly. Once the inner ring is secured, the rest of it took about 3 minutes..... So frustrating..
Hi Rob, thank you for your comment and we understand that different models will be designed differently, we are glad you managed to do it so well done.
Rob Brewer I’m at the same point with my Dynamic Next machine, how did you manage to open the spring?
I have a hotpoint wml 720 . Same procedure?
Hi greenparty, we have a video on a Hotpoint which will help you better ua-cam.com/video/NkdwIWGrOXo/v-deo.html&t
That white retainer strap is too big its come off ours and too big to go back on. What's the issue ?
Hi Tone wareham, you have to make sure when refitting the strap that it goes into the teeth correctly then when you push it together it will tighten itself.
My washing drum does not seem to be moving I put the outer ring back on as that is what fell out but the washing drum does not seem to be moving please help
Hi Wayne, if you have replaced the door seal check that it's fitted correctly and not catching on the drum.
I have been trying since days to put the new seal or reput the old one, it keep getting out from the opposite side, anyone got a tips?
Hi Wassim, make sure when putting the new seal on use some washing up liquid as this helps it go on much easier, take your time and watch the video a couple of times to get the knack of how to do it.
thanks worked, i was doing it wrong
That task was harder than Elden ring 😅hands are fucked diagrams showing which ions where would have saved me So much time
Mine does not have a screw it's just a spring
I still don't know how to get the outer seal on
What part are you having difficulty with?. The seal has a gap that goes over the rim of the drum and another gay that goes over the rim on the front panel.
3:19 'you can then work the lip round the rim of the drum itself.'
No you cant. You can't work the lip round the rim of the drum itself. It's impossible. I've been on it for 2 hours.
Hi, we were referring to fitting the seal around the lip on the outer tub not the inner drum. If you look at the seal itself there should be a tight gap that will part allowing the inner edge to go inside the drum opening and the outer rim of the gap then pushes over the lip on the outside of the tub. Fitting can be difficult so it is important to ensure this 'gap' is lubricated' with the liquid soap to help it slip over the rim as you work it around. For a quick practice see how the outer lip fits and feels as you work this onto the front panel. Once you have got the hang of this take the front lip off again and retry with the seal to the tub. When retrying fitting to the tub I find it easier to start at the top and work one side down then the other as gravity can help the seal hold onto the lip. Good luck.
eSpares I agree this is impossible, using liquid soap has any made it worse as rubber keeps slipping off. you need more hands than an octopus. Also the video is so misleading, only a matter of seconds to fit the inner seal? more like hours. Complete disaster.
I took me a long time too, until I realised I was doing it wrong. The seal, in fact, has a kind of a "pocket" that needs to fit around the metal lip of the drum and the door opening really snuggly - but it is possible.
I agree, it really needs two people, one to hold the seal in place at the top and the other to work it round. But we managesd in about ten minutes. Saved a fortune. Thanks for the video.
hoover dxc cd49w3 model here . This could be the worst guide ever existed ,what a joke .Its funny how you think the rubber just ''stays there '' waiting for you to finish rounding it up .Then you SOMEHOW manage to get the spiral seal which is impossible to do so the lower part where is no space to move even a baby finger . Never again a hoover ,never again changing parts .
im having a nightmare fitting mine grrrrrrrrrrr
its such a relief when it goes on .... phew !
+bristolguy100 Patience and perseverance. Glad you hear you got there in the end. :-)
Soory, got to mention that the nice, easy inner retainer is NOT nice and easy like yours. It is a little bitch piece of wire with a spring connecting the two ends. It takes two people, a piece of STRONG string, and two pairs of needle-nosed pliers, and a lot of swearing!
Thanks for the comment and sharing your experience. Unfortunately sometimes the easy things become the hardest but we're glad you never gave up and got the job done in the end :)
Hahahaha :-) I am a former hoover engineer, I work on all brands now :-) I am just imagining what you guys were doing and how you were using the tools and string hahaha :-) Its easy when you know how, same with all professions :D You can work stuff out in the end, however the "nack" that professionals have is overlooked sometimes lol. I assure you it can be done quickly with just your hands, and one of you. You just goto be confident and firm and have the nack :-p
Thanks Jason, like everything in life the more often you do a task the easier it becomes.😊
eSpares Unless your talking about a woman....
Easy there Jason, perhaps 'we' just need to develop our skills in that area. 😊