YES YES YES! I was trying to connect it and could not figure it out! I finally figured it out by watching a video in Dutch..... Thanks for doing one in English!
Hey Christian, I am trying as hard as I can to get the 3D and MA2 on PC to connect and no avail. At this point i Just want to give up on MA completely and us whats been working for me... I guess MA is just not meant to work for me....
I got them connected but my show file doesn’t show up on MA 3D. All of my lights are in the middle of the room and on the ground, nothing changes. I’m pulling my fucking hair out trying to get this god damn visualizer working.
When I click 'Add Present' under the 3D tab in Network Configuration, nothing happens. Both MA2 & MA3D have the same IP address, but they don't seem to be talking to each other. And it won't even let me input the IP address manually in the 3D tab in Network Configuration. Is there something I missed? I'm using v3.3.2.2.
After trying for 2 hours... from manual: The software version of the MA 3D and the console/onPC needs to be the same. MA 3D v.3.0.0.5 fits to grandMA2 console or onPC version 3.0.0. Important are the first 3 numbers. If you have different version numbers, there is no connection possible.
Hey Christian, is it possible to control the stepfade of a chasers with another executor fader? So e.g. you can make an "StepFade" master for all of your Chasers?
Hi Christian, Could you please give me a helping hand with the 3D? The session is properly connected, I've patched my fixtures but only some of them are visible in stage view and 3D. Is there something that I'm missing in patching? I've created the fixtures myself because I could't find them in the library. Thanks for your help!
Hey Christian, I was wondering if you were ever planning on doing that RZ mix or review, if you do is it possible for you to maybe put a cdj on the side? Because I was planning on getting an RZ and maybe getting a CDJ 2000 NXS 2 aswell. I would just love to see how they work together!
Curious, if I want to hook up a 2nd computer, what would I do? I'm confused! Thank you for your video:) I really wanna run 3D during the show on another computer!
Hey Christian, I have a question. I followed all the instructions in this video, but when I go to my network config tab, under 3D, the version says 3.2.2.3 in red. My MA3D version is 3.1.2- Im not able to connect 3D to OnPC and i think that is the issue. Any suggestions?
I can "add present" but it will not lights up green the hostname and 3D says "standalone" but see the session on session tap. Anyone know what happend?
Hey Christian! Please continue making these MA2 videos they are really interesting!
Thank you Christian, I was struggling to join anything on MA3D , then, thanks to you , it succeed!
Thanks man, helped me a lot. I'm building lights for church this weekend and couldn't figure out how to get the program running lol.
Still working for V3.9 this was exactly what I needed. Thank you!
I have no present/ items when i try add new layer 3D in MA Network Configuration :
YES YES YES! I was trying to connect it and could not figure it out! I finally figured it out by watching a video in Dutch..... Thanks for doing one in English!
Yes thanks for this video man! really was going crazy not getting it to work
I was about to go crazy about this, can't thank you anymore!!
Thank you so much Christian, i was searching the whole internet and just found your vid by accident, now i know it!! Thanks so much!!
Hi Chris, im stucked in the 3D where I need to set the IP of MA3D. Add present button does not respond. What did I missed? Thanks in advance.
Did you fixed it? I have the same issue
Hey Christian, I am trying as hard as I can to get the 3D and MA2 on PC to connect and no avail. At this point i Just want to give up on MA completely and us whats been working for me... I guess MA is just not meant to work for me....
same here man, did you figure it out eventually??
Thanks man, I keep coming back to this tutorial. Super helpful
thank you mr jacskon !!!! i'm borring all the day about this session member "yes" !!!! great thank's
love it, still applies in 2020
Aw man this was very helpful, glad I could find it. Thank you so much!!!
Thank you so much Christian Jackson
It worked, thank you very much Christian!
I got them connected but my show file doesn’t show up on MA 3D. All of my lights are in the middle of the room and on the ground, nothing changes. I’m pulling my fucking hair out trying to get this god damn visualizer working.
Thank you for this.I couldn't find that missing Join button!
YES! THANK YOU! Great videos my man. Subbed.
you saved my show :)
When I click 'Add Present' under the 3D tab in Network Configuration, nothing happens. Both MA2 & MA3D have the same IP address, but they don't seem to be talking to each other. And it won't even let me input the IP address manually in the 3D tab in Network Configuration. Is there something I missed? I'm using v3.3.2.2.
Nevermind, apparently for some reason it only works when I use the local 127.0.0.1 IP address for both.
Now they both won't stay on the loop back
After trying for 2 hours... from manual: The software version of the MA 3D and the console/onPC needs to be the same. MA 3D v.3.0.0.5 fits to grandMA2 console or onPC version 3.0.0. Important are the first 3 numbers. If you have different version numbers, there is no connection possible.
LorenZo-M I have exatly the same versione but it doesn't connect, can you help me?
@@DragonHeir8585 thanks so much dude
Thank you. This video is really helpful still in 2021!!
Yessss needed this so much!
Thanks for this video- very helpful!!
Thank you !!! Only this video help me!! I connect ma2pc with 3d. You best!!))
Hey Christian,
is it possible to control the stepfade of a chasers with another executor fader? So e.g. you can make an "StepFade" master for all of your Chasers?
I am trying this with 3.4 but Net Control wont allow me to add a new Station. and nothing shows up in selct station when I go to Network config
What did you get figured out. ImHaving same problem
Why does my loopback speed connect at SLOW?
Thank you very much !
Thanks a lot for this video ! I was just about to burn down my computer to find that join button !
yea i was having problems connecting.. might wanna make sure you have the right versions together also :)
Why when i click the add present it did not show at All?
Man, I was JUST having this problem. Thanks!
God bless you sir.
Thank you so much!!
Merci l'artiste. Tu es bien sympathique.
This is so useful, if only that had existed a month ago :)
It did. we had it!
Hi Christian,
Could you please give me a helping hand with the 3D? The session is properly connected, I've patched my fixtures but only some of them are visible in stage view and 3D. Is there something that I'm missing in patching? I've created the fixtures myself because I could't find them in the library.
Thanks for your help!
Hey Christian, I was wondering if you were ever planning on doing that RZ mix or review, if you do is it possible for you to maybe put a cdj on the side? Because I was planning on getting an RZ and maybe getting a CDJ 2000 NXS 2 aswell. I would just love to see how they work together!
Are you ever available to Skype and explain writing Bome files?
Helped me out! Thank you!
thankyou so much sir
Ok mine says master 1? And it lets me to threw your process, shows ip address but isn't allowing me to add
Thank you!
Thanks Champ
Gotchu.
Thanks!!! This video really helped
Perfect ! You Saved me !
holaaa Christian,,, thank you for the video...
i want to ask, how to enter the stage on ma 3d with sketchup file or 3dmax?
thank you for your time
seriusly i love you
Its really helpful!!!
Curious, if I want to hook up a 2nd computer, what would I do? I'm confused! Thank you for your video:) I really wanna run 3D during the show on another computer!
thank you!
Hey Christian, I have a question. I followed all the instructions in this video, but when I go to my network config tab, under 3D, the version says 3.2.2.3 in red. My MA3D version is 3.1.2- Im not able to connect 3D to OnPC and i think that is the issue. Any suggestions?
yes, you need to have the same streaming version to be able to communicate.
+Christian Jackson how do I set them to have the same streaming version? I'm pretty sure I have the latest version of 3D.
Same problem here... how did you fix it? Where do I change in to the streaming version?
Thanks boss ! you saved me :)
I can "add present" but it will not lights up green the hostname and 3D says "standalone" but see the session on session tap. Anyone know what happend?
Did you try right click on session member and choose yes? usually it taks a little bit and then it turns green and then it starts to sincronize.
Hello, thank you so much for video, I did everything but session didn't change to green, can you help me, please?
the same happened to me, till I used the loopback IP 127.0.0.1 and then i suddenly worked fine!
Thanks alot! The join button dissapears indeed :P
how much does MA3D cost? awesome video btw
how do i reconnect when you leave
i live the video
thank you
Can you do a Martin garrix mix and a gear tour
cfg info pc? pls
Does not works.
thanks
Thangs
TOT you are the savior!!!!! i gonna kiss your feet!!!!
the worst interface.. honestly. thank you for the video and all te rest of the helpful videos.
this still doesn't work for me for some reason
thanks