Replacing Your Worm Gear On Your KitchenAid Mixer
Вставка
- Опубліковано 1 сер 2024
- This video will take you step by step on removing and replacing your Worm Gear on your KitchenAid Mixer.
240309-2 KitchenAid Worm Gear in Bracket secure.kaparts.co.uk/sku/2403...
W10112253 KitchenAid Worm Gear (was 4162897) (sometimes marked 241803L) secure.kaparts.co.uk/sku/W101...
Thank you for your excellent “how to” video on the worm gear assembly replacement. I’m grateful that I could follow your detailed instructions and repair our old KitchenAid mixer myself. It made a difference for me.
Thank you. Worm gear fixed and regreased thanks to this.
Can you provide information on cute stand? Is it 3d print edition? Please send where i can get on buy or make? I have a 3d printer 🖨. Thanks. Love your videos was a great help in relacing gears.
Thanks for the video.
Like a few commenters, I found the video was way too optimistic about getting the roll pin out to remove the planetary gear.
You say "tricky" but even with the manual-recommended punch size, a big hammer and lots of effor, it's been impossible.
I'm now sitting with spare parts all at the ready and likely about to give up.
This seems like a really weak design from KitchenAid.
Can I suggest that your readers, try get that far, getting the planetary removed, before ordering the parts?
Which gear type do i need for 5KSM150 model?
Hi Jade. Where can I get that cradle? Thank you!
Hello, very nice and informative video. Liked it. I am from India. I got a kitchen aid from my relative 6-7 years back who brought it from USA. Now it has stopped working. May be due to worm gear. I am not sure which worm gear model to order. How to identify if a worm gear will fit my kitcheaid? Thanks in advance.
Hi momshomemade,
Thank you for your kind words.
Please let us know the full model number of your appliance which should be on the underneath of the machine and we may be able to help you further.
Jade
Hi Thanks. Model no is KSM150PSWM
@@momshomemade Hi,
Thanks for the reply.
If your mixer has completely stopped working then this will not be a worm gear issue. It may be that your motor brushes have worn down. I have added a link below for the help video on motor brushes:
ua-cam.com/video/5YuS3atXR0M/v-deo.html
Please let us know if the problem still persists after checking your motor brushes
Jade
I'm trying to remove the pin but it's impossible. It seems stucked even if I used a drift and lots of WD 40. Any ideas?
Hi Alex, I have removed loads of these and 99% of the time it will "knock out". Sometimes I have to hit it from the other side. WD40 is unlikely to help, if it is stuck, the chances are it has been slightly sheared. If you really cannot shift it, the next option is to drill it out. To minimise damage, center punch the pin and make sure you have a well centered and deep mark on both sides. When you drill the hole, only go deep enough to clear the planetary (about 4mm). Start with a small bit. DO it right and you should be able to pull out enough material to allow you to pull the planetary off. Do this on both sides.when you have the planetary off you should be able to knock out the rest of the pin quite easily. You will obviously need a new pin after this.
@@KapartsCoUk Thank you so much for this. I managed to get it out in the end with your suggestions. Now waiting on the parts to complete the repair later today. Thank you for your video. Best wishes.
BONSOIR , Je regarde beaucoup vos vidéos je vous remercie les explications sont magnifiques j’ai un KITCHENAID 5KSM150 Mon robot fait énormément de bruit … Je vois dans vos vidéos vous avez changé la platine de contrôle puis nettoyer l’engrenage central je voudrais faire tout cela est-ce que vous pourriez me donner la référence de la GRAISSE Je vous remercie de votre réponse si vous pourriez m’aider s’il vous plaît bien cordialement
Bonjour, la graisse des anciens modèles est brune et s'appelle Benalene 930-2. Il n'est plus fabriqué et n'est pas conforme aux lois en vigueur en matière de transport. Ce n'était pas sans danger pour les aliments. Il y a quelques années, KitchenAid est passé à une graisse blanc cassé qui est sans danger pour les aliments. Les deux types de graisse ne doivent pas être mélangés. Nous espérons faire une vidéo bientôt pour montrer le processus pour éliminer facilement toute la vieille graisse. Si vous nous envoyez un e-mail via customerhelp@kaparts.co.uk, nous vous informerons lorsque nous aurons quelque chose à vous envoyer. Bien cordialement, Doug
Here is our reply in English. We used Google Transalte for the above reply so please account for any anomolies.
Hi, the grease in older models is brown and called Benalene 930-2. It is no longer manufactured and does not comply with current laws regarding transportation. It was not food safe. A few years ago KitchenAid changed to an off-white grease which is food safe. The two types of grease should not be mixed. We hope to make a video soon to show the process to remove all the old grease easily. If you send us an email via customerhelp@kaparts.co.uk we will update you when we have something to send you. With kind regards, Doug
@@KapartsCoUk Bonjour, je vous remercie de votre réponse je voudrais savoir le bruit de mon kitchenAid .Puis une autre question je n’arrive pas à enlever l’axe qui permet d’enlever le planétaire je vous remercie de votre réponse. cordialement.
@@Caroline-ph4uc Bonjour, veuillez envoyer une vidéo à customerhelp@kaparts.co.uk afin que nous puissions en savoir plus sur le son que produit votre table de mixage. Si votre goupille à rainure ne bouge vraiment pas à l'aide d'un marteau et d'un poinçon, vous devrez peut-être percer 5 mm de chaque côté. Cordialement, Doug
Hi, Please send a video to customerhelp@kaparts.co.uk so we can understand more about the sound your mixer is making. If your groove pin really wont' move using a hammer an dpunch, you may have to drill out 5mm from each side. Regards, Doug