Which model did you tried? I had no issues washing the car, even on occasions when it was very dirty, when paired up with the right products. Although I haven’t tried to wash the skin off a rice pudding 😂
I have the base model. It is mostly fine. It washes cars. No matter what I do I cannot get a regular foam cannon to work (stuff just dribbles out), but it comes with a soap bottle which sorta works. And I bought an IK Foamer for snow work, which is worth getting. I am intrigued by this higher spec model as flow rate is considerably higher. And yes, it works just fine for bikes too. Absolutely not a bearing killer.
Exactly. I also love to have my IK foamer ready, but I mostly use that on wheels. I have the higher spec hydroshot, and it does a great job with a generic but normal foam cannon. I have a short demo how does it look like when used with a thinner snow foam solution. It does a great coverage (in my opinion the results it give is much much greater than the worx foam cannon) but there is an option to change the orifice from 1.25 to 1.1 in case of used with hydroshot. As it will atomize the snow foam better, meaning you will get a better density out of the foam cannon with a lower pressured pressure washer, such as the work hydroshot. Here is the demo: ua-cam.com/video/3VLOoqmsX40/v-deo.html Hope it helps, Viktor
@@RoadToDetailing just to say thank you for your advice. Tried the smaller orifice and it made no difference. I think that one day I'll upgrade to the more powerful model. In the mean time, IK Foamer to the rescue. Your point about the smaller battery is also very valid.
If you are happy with the way your current model works, just keep it. The higher specs model is very expensive, and yes, that’s much better, but if you already have one, just keep it. IK foamer does an excellent job for foaming the car. If you tired of pumping up to often, then check out the IK Foamer 9. 👍🏻 I really appreciate your feedback btw, it means a lot. 🙌 Viktor
What device you used while watching? I have no issues in regards the matter of the volume of voice over. (Music is at -27db while the voice is at -6db) If you meant to my accent while speaking, that’s a different story, not much I can do about ✌🏻 If you struggled understanding, try using the captions under “cc” icon on the top right corner beside the settings icon. Thanks for your feedback, I just need more context to get exactly where should I improve 🙌
Very informative
Great for hose pipe bans we have here in the UK
Indeed Steve 🙌 Wish it would be less pricey though..
love a portable pressure washer, I got lucky with the one I brought a whole back ,
Indeed Darren! They can be very useful in certain occasions. 🙌
Interesting tool. Never scene this before. Well done, thank you for making.
Indeed, great bit of a kit. I’m glad you enjoyed. Thank you for stopping by and watching 🙌
It wouldn’t wash the skin off a rice pudding but would be ok to wash a push bike
Which model did you tried? I had no issues washing the car, even on occasions when it was very dirty, when paired up with the right products. Although I haven’t tried to wash the skin off a rice pudding 😂
I have the base model. It is mostly fine. It washes cars. No matter what I do I cannot get a regular foam cannon to work (stuff just dribbles out), but it comes with a soap bottle which sorta works. And I bought an IK Foamer for snow work, which is worth getting.
I am intrigued by this higher spec model as flow rate is considerably higher.
And yes, it works just fine for bikes too. Absolutely not a bearing killer.
Exactly. I also love to have my IK foamer ready, but I mostly use that on wheels. I have the higher spec hydroshot, and it does a great job with a generic but normal foam cannon. I have a short demo how does it look like when used with a thinner snow foam solution. It does a great coverage (in my opinion the results it give is much much greater than the worx foam cannon) but there is an option to change the orifice from 1.25 to 1.1 in case of used with hydroshot. As it will atomize the snow foam better, meaning you will get a better density out of the foam cannon with a lower pressured pressure washer, such as the work hydroshot.
Here is the demo: ua-cam.com/video/3VLOoqmsX40/v-deo.html
Hope it helps,
Viktor
@@RoadToDetailing just to say thank you for your advice. Tried the smaller orifice and it made no difference. I think that one day I'll upgrade to the more powerful model. In the mean time, IK Foamer to the rescue.
Your point about the smaller battery is also very valid.
If you are happy with the way your current model works, just keep it. The higher specs model is very expensive, and yes, that’s much better, but if you already have one, just keep it.
IK foamer does an excellent job for foaming the car. If you tired of pumping up to often, then check out the IK Foamer 9. 👍🏻
I really appreciate your feedback btw, it means a lot. 🙌
Viktor
Lose the background tempo / music and we'll probably hear what you are saying lol.
Just my opinion
What device you used while watching? I have no issues in regards the matter of the volume of voice over. (Music is at -27db while the voice is at -6db)
If you meant to my accent while speaking, that’s a different story, not much I can do about ✌🏻
If you struggled understanding, try using the captions under “cc” icon on the top right corner beside the settings icon.
Thanks for your feedback, I just need more context to get exactly where should I improve 🙌