How to Replace Upper Control Arm 09-14 Ford F-150
Вставка
- Опубліковано 4 вер 2024
- Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ia/1ASF...
1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, or damaged control arms with ball joint. This video is applicable to the 11 Ford F150
🔧 List of tools used:
• 21mm wrench
• 21mm Socket 1aau.to/okJ/1AX...
• 22mm Socket 1aau.to/obf/1AX...
• 1/2 Inch Breaker Bar 1aau.to/ogJ/1AX...
• Ratchet 1aau.to/oUV/1AX...
• Socket Extensions 1aau.to/oKv/1AX...
• Torque Wrench 1aau.to/ooH/1AX...
• Rust Penetrant
• Floor Jack 1aau.to/om7/1AX...
• Jack Stands 1aau.to/ond/1AX...
For More Info visit us at 1aau.to/h/aBA/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
It's great to see a repair that didn't go perfect like in so many other videos. Thanks for posting this!
They should do it way more often so it's realistic lol. None of my bolts or anything come out like the videos lol
Real world videos and how to get around real problems during repairs. You’re patient and good at what you do. ✅
+Mark T Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
I love these videos, and have used them several times. Just did this today, and a STRONG suggestion to remove (and might as well replace) the struts while you have everything torn apart. Trying to wiggle out those control arm bolts is no joke!
This video was massively helpful to me, thank you.
I’m my case one side had the spring coil directly in the way. I removed the top strut nuts and the sway bar link to allow the knuckle and strut to drop and the pulled the strut outward to give me the clearance to remove the upper control arm bolts behind the strut. This still saved me a ton of time compared to other needlessly more complex videos.
Finally a real representation of the struggle as a auto tech
I'm about to tackle this job in about 5 minutes. Thanks for showing all the obstacles you ran into because that will help me if I/when I run into the same problems. Excellent job I believe I can do it now
That lady is out there putting most “men” to SHAME.
Supposedly,women are equally capable so where would the shame come from? She needs conversion therapy.
Good simple video, not every method will work every time, not every toolbox has identical tool inventory. Love your "wrench extender", had one as a mechanic (some would "double wrench" for leverage).
Not a critique, just a suggestion . . . when breaking lugs loose, always push down for less stress on your back and you are braced if it loosens suddenly. When applying a lot of force to combination or torque wrench or breaker bar I would always use padded "mechanic impact" gloves - the jarring will take its toll on your palms and fingers over time.
retired fleet mechanic- worked on everything from automotive to big rigs to construction equipment
I love how she shows the struggles we have at home lol. But, to make this even easier you can undo the sway bar linkage, and the top 3 bolt of the strut tower. This will allow you to push the lower arm down enough and the upper control arm bolts should slide right out. Hope this helps some folks
Ratcheting wrenches for the win..
so I just did this repair on a 2013 F150. I could REMOVE the 2 bolts that hold the upper control arm on with the strut in place but I COULD NOT re install them once the new control arm was installed. I ended up detaching the strut at the top, the bottom, released the upper stabilizer bar link nut and by moving the strut around within the mount WAS able to reinstall. I don't know if the F150 I was repairing is different from the one in this video, but for those watching, hopefully if you run into problems as I do, my approach will help.
Why is a woman doing car repair instructional videos? According to my wife this is a man only occupation. Must be a unicorn. Probably the only female that knows how to turn wrenches in the world. Excellent job, couldn’t have done it better myself!
Great tip about measuring from center hub to fender to know where to set the height of the hub before tightening the control arm bolts.
15:05 a crowfoot open end wrench head at a 90 degree angle on the torque wrench should do the trick.
Thanks for just using handtools thats what most of us diy guys are going to use. Hate those diy videos with all the fancy tools that make it a breeze.
Thanks for the feedback and for checking us out. 1aauto.com +Hello There
I love how whatever your have in your hand becomes "the hammer".
One off my favorite chanels 🤗🤗🤗
+Miguel Hernandez Thanks for the feedback!
FORD decided it would be funny too have a bolt with an inch and half of no thread just too make it so it wont come out .....I highly recommend cutting those bolts down where there is no thread....once you do that it slides right out no problem....first time I did it I fought with it . Cut the bolts and the next time I did it was done in 15 minutes. CUT THE BOLTS DOWN .
So I still need to do the measurements if I’m putting extended upper control arms on with a 3 inch level kit?
Thanks for the video I ran into a problem with it. Is making noise after I replaced the whole front end.
I did not have to remove the struts to change the upper control arms on my 2010 F150. It wasn’t easy to get the bolt back in but I was able to do it.
I'm about to do mine bro. Any other tips lol
What's a caah?
They have your bushings are good you can drop that arm and just get the ball joint by itself you got a lot of room once you loosen that that control arm so you don't have to go through all that headache if you're bushings are good if your bushings are good press out the old joint pressing the new one
Joys of working on cars in the rust belt.
Nicely accomplish!! Great video
The shop manual seems to contradict itself - It says 85 ft-lbs for the upper tie rod nut in some places, but 111 ft-lbs in other places. How do we know 85 ft-lbs is the correct value?
You need a ratcheting wrench like Gear wrench for the bolts
Or take the strut out
Good video, thanks.
Thanks you for your time and your knowledge .. you helped me out I appreciate you
Excellent video Thanks for sharing ☘️
+Dusty Frog Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Excelente trabajo..gracias….
Sue is the best!!
The trick to move the spring to get the bolts out I was about to drop the shock!!!
And I’ve been working on the easier bolt on the control arm for over an hour and it won’t move
Nice video exact same scenario for me 😂
Is it a must to measure from center hub to fender?
no, just set the jack stand under the side you are working on as close as possible to the other sides distance from the LCA to the ground.
Obviously the profanity was edited out of this video ! Otherwise fine job Sue.
Cutting torch
what if you have a leveling kit strut spacers
I'm trying to do this but there is no clearance to get the bolts out. There is a big rubber part in the way at the top of the shock instead of the spring itself. What do I do?
Thanks!
If the strut coil spring is busted remove it and getting the bolts out is a breeze
You missing the point
Any of u did the tire measurement aswell too. Then tighten the arm
What happens if you don't do the measurement. Also how come when you put the tire on I notice that the strut is new. Job is much easier with the strut out.
@@dalelucas4825 You'll end up tearing up the bushings. It won't be an instant thing, but they won't last the normal service life of the part, instead you'll likely be replacing them again in a year.
You can still do the job properly without measuring it. You just have to mark it to their original position before loosening the bolt on upper arm so that you have reference when you install the new one.
If the last guy did it wrong,is there a point to measuring?
@@MrALEMARPONGOS z
I just tried to do my passenger side control arm and the bolt towards the front end would not budge. We greased it, and beat on it for an hour, without getting it loose.
Does anyone have any suggestions on how to get it out of there?
How often we should replace them?
Measurment from axle how much i suppose to do bcz i am installing 3" bolt on RC kit which comes with upper control arm
*3"lift kit
100% flipping the bolt direction for my future self
Lol, would hit the coil
I have an 2000 Mercury Grand Marquis that also need upper control arms replaced as well. Can I use this same method without taking the brake caliber off?
Ford pisses me off I had to remove the strut to gain clearance too if they switch the bolt around this wouldn't be a problem.
ALWAYS wear your safety glasses.
No grease fit that sucks
That's why I choose Moog.👍🏾
@@ArgosySpecOps Yeah man I just bought moog to. Mechanic recommended it 👍
I tell u,,, she puts us men to shame by not whining through the show about previous mechanics ineptness... plus this aint her first rodeo! And,,, can u believe how much rust yall get on new trucks? makes me cry for em. My willys from the fifties isn't that bad.
+Primitive Bob Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Close only counts in horse shoes and hand grenades!
So.... definitely take the shock out first.... lmao
Thanks for checking us out. 1aauto.com +Jim Burlew
Well I’m about to find out if you definitely have to or not
No cut the bolts down. The part that doesn't have any thread ...has absolutley no use....cut them off and no problem getting them in and out
@@MrChancebandit you mean the hex sides?
@@MrChancebandit That's only a viable option if you're replacing the bolts. Otherwise if you didn't get new bolts you'll have to wrestle them out or remove the strut.
Good frygood for you
Listen, evidently this was pre-removed before the video. I done everything that she said nothing worked. The ball joint didn’t just easily come out. The 10mm trick didn’t work either. The 10mm bolt head started to twist off so I stopped. I pried and pried nothing happened. Unfortunately I’ll have to take it to a garage and pay big $$$$ to fix it.
Lmao
Guess you ain’t that good with tools huh😂😂
What she did definitely works. If you aren’t able to get anything to work or get creative then take it somewhere and give them your money
@@Milo-mc6dd Must be one of those things called Gen Z or Millennials...
Get a deadblow and swing for the fences on that knuckle, it'll pop.
Rust penetrant 1st and clean the threads with a wire brush 🤦♂️. Air tools make this job a breeze....you're showing people how to do this the hardest way possible
Air pressure kinda low.
I think I have a bad ball joint the control knuckle is laying on the spring that isn't normal right?
Lmao so for this to work does it have to be from A1 Auto 😂 lmao jk
my bolts are on the outside of strut tower and Nut on inside completely opposite from this, should be much easier mines 2009 Ford F-150 anyone’s else’s on the outside like mine?
Got an 08 sadly the nuts aren't on the inside but they will be when im dont with it🤣
Done*
Fired!!
This video is wrong yes you have to remove the strut first
Cut the bolts down before you remove them ...comes out no problem and for future times as well.
That is the dumbest way to bolt those in. They should have put the nuts on the inside
Engineers dont change control arms...😅
Women working on cars 😂
A man should have helped. Not cool,guys.
She don’t like to break the rules torquing…
Continues to click the torque wrench two more times. Why did y’all do this to her?