DIY CAMO WITH DISH SOAP AND SPRAY PAINT! HOW TO SPRAY PAINT YOUR GUN, AIRSOFT, OR PAINTBALL GUN.

Поділитися
Вставка
  • Опубліковано 2 тра 2022
  • Simple how to achieve the above effect. looks like a blend between multicam and m81 woodland to me. What do you think?
    Please subscribe!
    I make few cents if you buy something with the links below, and I appreciate it!!
    3KOG merch!
    3kogdesigns.company.site/
    spray paint: amzn.to/3FimAgI
    dish soap: amzn.to/3vAnbXN
    optic (scope):
    upper/LPK(EPT): alnk.to/4XqZl9r

КОМЕНТАРІ • 1 тис.

  • @Zermattquattro
    @Zermattquattro Рік тому +216

    By far the best home-rattle can paint job on UA-cam. The dish soap method gives very good results combined with a conservative approach to laying paint on. In turn Coupled with the fact that your colour choice was as good as it gets. it has a nice high end finish too it. I’d be proud of the end result. 👍

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +9

      Thank you!!!

    • @billfleming1978
      @billfleming1978 Рік тому +2

      @@3KindsOfGuns How well does the paint stay on long term?

    • @Skipro
      @Skipro Рік тому +2

      I have had it turn out pretty well but your method is so awesome I’d be outside doing it if there wasn’t a ft of snow out there can’t wait until it warms up your paint job really turned out so awesome!!

    • @3KindsOfGuns
      @3KindsOfGuns  3 місяці тому +1

      Lasts well because I baked it on.

  • @bandnmajors1465
    @bandnmajors1465 2 роки тому +186

    Bro, that is probably the sickest back yard paint job I have seen. Very ballzie, but damn the final product looks legit AF. Well done.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +2

      Thanks! I will be doing my 12 gauge AK soon!

  • @rohawaha
    @rohawaha Рік тому +96

    I paint a lot of rifles , interesting concept using the dish soap like a "liquid stencil " , most people don't realize that for good camo effect, that the different colors must break all the edges of the rifle to break the outline or silhouette. The dish soap does a great job of breaking the edges by flowing over them. I do exact matches of military camo's tiger stripe , marpat , multicam etc.
    Another quick concept I have used is Sea Sponge Camo ! You just paint a base coat and then use pieces of cut sea sponge to dob on different colors of paint, each cut of the sea sponge gives a slightly different pattern for each color . Be sure to blot the sea sponge on something between dipping it in the paint and transferring it to the rifle so no paint runs. It's a great method for getting the colors and pattern exactly where you want them. WARNING ! Painting camo is addictive " none of my rifles are black anymore " and all my shooting buddies are jealous .

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +9

      I need to try the sea sponge method! Video to follow!

    • @nigelcrete3901
      @nigelcrete3901 Рік тому +2

      Addicting for sure. Not to mention fun.

    • @harrykuheim6107
      @harrykuheim6107 Рік тому +1

      I painted all 17 of my BB Guns....all different...One custom for my Daughter...she picked 3 colors, Pink, Purple, and Gold...I don't think you can go wrong

    • @supersportimpalass
      @supersportimpalass Рік тому

      Try sea sponge soap. Same method/concept as this but different result.

    • @rohawaha
      @rohawaha Рік тому

      Are you pulling my leg ,L.O.L !

  • @richardschafer7858
    @richardschafer7858 Рік тому +62

    Been rattle canning my rifles for years, and I'm pretty good at it. Never seen this technique before. Very slick and I'm impressed. I freely admit I will be doing this next time. 😆

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +5

      I was very impressed with the results as well, that was my first time!

    • @victorglaviano
      @victorglaviano Рік тому +1

      If you have worked in a body shop, I've seen Dawn used before, spread out on windshields and body panel to prevent overspray from sticking, then run it through the wash station after curing.

    • @3KindsOfGuns
      @3KindsOfGuns  3 місяці тому

      Neat!

  • @allenhammack8334
    @allenhammack8334 Рік тому +5

    Hands down the best rattle can job I've seen on the Tube

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Thank you! Please like, subscribe and post it on all your social media. Helps my channel grow!

  • @ricardocarmona5210
    @ricardocarmona5210 Рік тому +36

    I've been studying videos. On painting my AR 9mm this is the best one yet. Thanks ✌

  • @stoneblue1795
    @stoneblue1795 Рік тому +61

    I was skeptical at first, but I really liked the end result quite a bit, that's a useful technique that could be applied to a lot of different projects, motorcycles, dirt bike, old toolbox.
    You earned a sub.
    😀

  • @walter992
    @walter992 Рік тому +24

    Hands down the best DIY paint job on UA-cam. I am going to have to give it a try.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Thank you! Enjoy the process! Send me a picture on Facebook at 3KOG via messenger and I will post your results!

  • @carlt8188
    @carlt8188 Рік тому +5

    The results look absolutely amazing! Well done.

  • @BuckFoeJiden
    @BuckFoeJiden Рік тому +1

    Definitely using this method for my SPR. Thanks for the tips.

  • @gdw1316
    @gdw1316 10 місяців тому +4

    Used this method this past weekend on an AR-10 build and I could not be happier with the results! Thank you for showing us how to do this.

  • @darkbulb367
    @darkbulb367 Рік тому +22

    DUDE! That dish soap method works awesome for Tiger Stripe pattern! Simple, easy, cheap & versatile methods. I was already happy as hell with what he did 3/4 way through.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +1

      Thanks!

    • @noretreat151
      @noretreat151 Рік тому +2

      some one agrees with my opinion...
      planning to soap tiger AR using your style, but not the final step.
      new subscriber.

    • @glockmaster9516
      @glockmaster9516 Рік тому +3

      @@noretreat151 yup I also preferred the first coat

    • @BurtReynoldstash
      @BurtReynoldstash Рік тому +1

      Same here, he did a great job tho

    • @3KindsOfGuns
      @3KindsOfGuns  3 місяці тому

      Why did you like the first coat more?

  • @mr.johnson3728
    @mr.johnson3728 Рік тому +9

    I've been up for the last 3hrs watching videos on this and this is by far the coolest and most simplistic breakdown on the topic!! Thank you so much for the knowledge!!

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Your welcome! Hope your project turn out good!!

  • @TheRiskyDingo
    @TheRiskyDingo Рік тому +6

    Definitely love the tiger stripe look. I did the sponge method on my first gpr which gave it a digital camo look. I'm gonna use this method on my spr for the tiger stripe drip.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      I've never done the sponge method before.

  • @lindsayearly7561
    @lindsayearly7561 6 місяців тому

    I am amazed. That is about the coolest camo pattern I've ever seen. AWESOME!!!!!!!

  • @spudboyQ
    @spudboyQ Рік тому +1

    All that sweet paint with a bonus gun cleaning instructional packed in. Nice

  • @Aussiem8e
    @Aussiem8e Рік тому +6

    Turned out better than I thought! Nice work!

  • @sebbean881
    @sebbean881 Рік тому +13

    Very nice result, congratulations! I even liked the first coat better, but the second coat is also awesome!

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +1

      Thank you! I was torn on if to do a second coat, and I was happy with the results.

  • @jwhite3389
    @jwhite3389 Рік тому

    Out of all the ways I've seen guns painted, this is by far one of the best results I've seen.

  • @dream_chaser7569
    @dream_chaser7569 Рік тому

    I’ve recently received two…
    I followed your directions.. and it worked easily. Thank you

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Awesome!!!
      Send me pictures on Facebook, I would love to share them!
      3KOG on facebook!

  • @ah6559
    @ah6559 2 роки тому +3

    Yeah, so that came out seriously awesome!

  • @Dubyatrader
    @Dubyatrader Рік тому +4

    That looks amazing! Nice work!

  • @jeffstevens156
    @jeffstevens156 Рік тому +1

    Awesome results! It looks really good and I’m just halfway through!

  • @fredrossi1334
    @fredrossi1334 Рік тому +3

    Looks great! I use various mesh fabrics, a metal hex mesh and craft store leaves. All stuff that I acquire from my wife's craft area.
    I use a matte clear over every thing at the end to keep the paint durable.
    My first project that I did as a test as held up really well. It's been on there for 8 years and gets well used. It's a Daisy Red Ryder, of course.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +1

      The amount of stuff I have stolen from my wife's crafts to paint guns is pretty amazing!

  • @bandnmajors1465
    @bandnmajors1465 2 роки тому +7

    It came out really good. Awesome concept.
    Well done Brother

  • @joeross952
    @joeross952 Рік тому

    I thought I had seen it all. Absolutely genius and amazing results

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Thanks, I'm very happy with the results, and will be doing more soon!

  • @johnlong384
    @johnlong384 Рік тому

    Thanks for your pretty slick painting tips - take care and try to stay out of trouble!!

  • @hoofgripweightlifting6872
    @hoofgripweightlifting6872 Рік тому +3

    WOW!! I gotta tell you. I have seen many camo vids. THIS IS THE BEST! Thanks for sharing.

  • @BugsyNY
    @BugsyNY Рік тому +3

    I wasn't sure how this was going to work out but got to say this is one of the best, if not the best DIY rifle paint jobs I've seen. 😎

  • @Georgia4Low
    @Georgia4Low Рік тому

    Outstanding!! Love the finished look!

  • @Mark-ks9jj
    @Mark-ks9jj 3 місяці тому

    I like how simple this is and pattern looks amazing. Will give this a go on my ground pod base

    • @3KindsOfGuns
      @3KindsOfGuns  3 місяці тому

      Thanks! And good luck! I need to do another one!

  • @Semprefi
    @Semprefi Рік тому +5

    The whole process is slick and the finished product is as cool as I’ve seen and better than most.
    Using the drywall tape instead of burlap or similar is way better imo. You could probably do a similar process using leaves and less striping for a woodland camo design too

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Yup, thanks, I am very happy with how it came out!

  • @m83miller
    @m83miller 2 роки тому +3

    Dude this is sick. Nice job

  • @silentfox8
    @silentfox8 Рік тому +1

    that looks incredible

  • @mikedolqueist1130
    @mikedolqueist1130 Рік тому

    Wow, great technique gives total random pattern. Love it. Will try on my next paint job.

  • @OKBushcraft
    @OKBushcraft 2 роки тому +3

    Came out great!

    • @3KindsOfGuns
      @3KindsOfGuns  2 роки тому +1

      Thank you!!! I was super excited to try it out, and am very happy with the results.

  • @JarlSeamus
    @JarlSeamus Рік тому +6

    Interesting technique, I like the end result. The drywall tape works really well, I've also seen similar done with a mesh laundry bag.
    Nice pattern!

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +2

      Yup, and the only reason I didn't use a laundry bag, is that I didn't have one laying around.

    • @JarlSeamus
      @JarlSeamus Рік тому

      @@3KindsOfGuns In any event, the pattern came out awesome! I'm probably going to do a similar scheme to my AR-9

    • @3KindsOfGuns
      @3KindsOfGuns  3 місяці тому

      How did it come out?

  • @MADMAX839
    @MADMAX839 Рік тому

    Never of this till now. Thanks; it’s awesome.

  • @BdogFinal14
    @BdogFinal14 Рік тому

    Without question, one of the best home camo jobs on UA-cam.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Thank you, another one coming soon, I just ordered some new parts for a different build.

  • @tacticaltray4907
    @tacticaltray4907 2 роки тому +3

    I love it! 😍👍🏽

  • @PoodooDdoo4U
    @PoodooDdoo4U Рік тому +3

    That looks really good. I think I would have gone a little more tan and coyote brown with a lighter drab. Maybe even a dash of light stone grey in spots but ONLY because I live in a desert region so it makes more sense for me and my surroundings. I've seen this same dish soap technique used for sneakers before as well. Very effective method, nice job bro. A tip though to anyone else looking to paint like this, lighter more misty multiple coats of paint tend to take longer to wear off. 4-5 very light dusting coats for the base layer works well in my experience. Thick coats will chip off alot easier. Also, if your colors end up a little darker than you meant to paint, you can hit it all with a very light coat of matte clear at the end to lighten shades up a bit and get a small amount of added wear resistance as a bonus. PS Rust-Oleum tends to last I bit longer than krylon in my experience, bet.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +1

      Good advice. I'm doing another one soon with a different color scheme.

  • @fullmetalchef
    @fullmetalchef 6 місяців тому

    I love this technique and outcome! Nice job.

  • @LooksLegitBro
    @LooksLegitBro 8 місяців тому +1

    just did this, incredible technique, simple enough for an idiot like me to do, and turned out looking great.

    • @3KindsOfGuns
      @3KindsOfGuns  8 місяців тому +1

      Awesome!! Feel free to hit me up on Facebook @3KOG. I'll share your end results if you are OK with it!

  • @207Jeff
    @207Jeff Рік тому +4

    Damn. I never would have thought. Looks badass. Check in after a few months and a few hundred rounds with a vid too please

  • @Rzut-Oka
    @Rzut-Oka Рік тому +3

    Great job!
    In Airsoft gun first we need put out the gearbox, electronics, hopup inner barrel ect..
    I think what other than soap can I use 🤔

    • @TheCamoguy987
      @TheCamoguy987 Рік тому

      I was thinking the same thing. Let me know what you come up with...

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +2

      If you can't use soap, I would just use a more traditional method, like how I did my Recce rifle.

    • @Rzut-Oka
      @Rzut-Oka Рік тому

      @@3KindsOfGuns can you give me a link ?

    • @phudge6184
      @phudge6184 Рік тому +1

      Low temp hot glue. You could create the same patterns as with soap but instead of rinsing the gun you should be able to peel the glue right off.

    • @3KindsOfGuns
      @3KindsOfGuns  3 місяці тому

      Interesting, have you done that?

  • @GoingPostal_mv
    @GoingPostal_mv Рік тому

    WOW! That is just sick looking! Incredible job done 😎👍

  • @clydegreen3028
    @clydegreen3028 Рік тому

    I've watched several vids on painting rifles but never actually done it myself. Your video has finally convinced me to try it

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Good! You just have to get in there and try it!

  • @DaveTex2375
    @DaveTex2375 2 роки тому +6

    You could always do a practice run on something like an old springer airsoft or bb/pellet gun.

    • @3KindsOfGuns
      @3KindsOfGuns  2 роки тому

      Yup, could.

    • @sway696
      @sway696 Рік тому +1

      Bro sick Idea. Gonna steal one of my kids tomorrow and try it.🤣 if it comes out good I'll just say I knew it would. 🤣👍

    • @3KindsOfGuns
      @3KindsOfGuns  3 місяці тому

      How did it go?

  • @guitarplayzme6449
    @guitarplayzme6449 Рік тому +4

    America, where hobby lobby and guns meet

  • @Moontanthefirst
    @Moontanthefirst Місяць тому

    Wow! Good job. Thanks for the demo. 👍

  • @rayduke7433
    @rayduke7433 Рік тому

    Really nice work. Must try myself.

  • @steveosoprano9078
    @steveosoprano9078 Рік тому +1

    Best looking DIY paint job I've seen.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +1

      Thank you! Please subscribe, I'm doing another one soon!

  • @wulfclaw4921
    @wulfclaw4921 11 місяців тому +1

    Best I've seen as a DIY job !

  • @mazmundie
    @mazmundie Рік тому +1

    That's hands down the best home job I've seen, Can't wait to give it a try. Great video man

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +1

      Thanks, I'll be doing a new one soon on my new competition rifle.

  • @richtyler8034
    @richtyler8034 Рік тому

    So glad I stumbled upon your video. Absolutely the best hands down DIY camo I’ve ever seen. You are a Freggin master.

  • @drivingjudgment
    @drivingjudgment Рік тому

    Using the soap is genius, very usefull.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +1

      Thanks, wish I could say I invented it!

  • @Tarqui787
    @Tarqui787 8 місяців тому

    Thank you so much for this video. I wanted to paint my rifle but wanted to do something different than the stencils. I painted mine today and it looks awesome! Thanks!!!

    • @3KindsOfGuns
      @3KindsOfGuns  8 місяців тому

      Awesome, send me pics on Facebook at 3KOG, and with your permission, I'll share them!

  • @bradyscott3159
    @bradyscott3159 Рік тому +1

    Best I've seen yet! Thanks man. I'm going to try that.

  • @realgk2417
    @realgk2417 Рік тому

    I’m so glad I found this right before I was about to go at it and have it not look this good! Thanks

  • @glennwilliams3692
    @glennwilliams3692 Рік тому

    Wow. 😮 I wasn't to sure but now I'm going to get bottles of dish soap. Omg that came out Amazing

  • @nates656
    @nates656 9 місяців тому +2

    This is an absolutely slick method (pun not intended). I've looked at a number of options with stencils, etc. I'm gonna rock this method this weekend. Awesome job man !! It looks great !!!

  • @PaulAmerican
    @PaulAmerican 5 місяців тому

    That came out really good. The areas where you have the circles,lines and blotches interacting with eachother creates a really nice depth.

    • @3KindsOfGuns
      @3KindsOfGuns  5 місяців тому +1

      Thank you very much!!! That's why I disagree with the people that said it looked best after the first coat!

  • @msims1250
    @msims1250 Рік тому +2

    That turned out really cool! I like it!

  • @johnmikel5934
    @johnmikel5934 10 місяців тому +1

    Nice job man. Broke all the sharp lines.

  • @kevinC_
    @kevinC_ Рік тому

    Came out great! If I ever gather the courage to paint mine I will use this method.

  • @burgerlord1297
    @burgerlord1297 8 місяців тому +1

    Looks awesome im going to try that method

  • @__tacocat__
    @__tacocat__ 7 місяців тому +1

    That looks amazing

  • @thomasrankl8011
    @thomasrankl8011 Рік тому

    very very cool, so far the best pattern I've seen so far.

  • @denimjez
    @denimjez Рік тому

    First time I've been surprised. This is something different. So many people just make the same video. I think this is the first weapon painting video where I learned something.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Thank you very much! I I understand what you mean by saying a lot of things are just repeated. I appreciate your view!

  • @tbone5040
    @tbone5040 Рік тому +2

    That came out really good!

  • @30rdmaga
    @30rdmaga Рік тому

    Turned out really good!!!

  • @handler469
    @handler469 Місяць тому

    That is very clean, sir.

  • @erasedfromgenepool.4845
    @erasedfromgenepool.4845 Рік тому

    Im gonna do this too my military cucv truck. That came out absolutely sick... Great job Brother

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Good luck. For whatever reason when I tried this method on a helmet, it didn't come out nearly as good.

  • @stevenkatz679
    @stevenkatz679 Рік тому

    I have done some killer paint jobs on quite a few guns , I got to try this , love it , excellent job 👍

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Thank you! I was very happy with how it came out as well!

  • @stevencamp3602
    @stevencamp3602 7 місяців тому

    HOLY COW!!!! AWESOME!! Good Job!

  • @johnnyhill5361
    @johnnyhill5361 8 місяців тому

    really cool paint job

  • @JovialPlanet
    @JovialPlanet Рік тому +1

    Great outcome.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Thank you! I was very happy with it as well!

  • @will2-b150
    @will2-b150 Рік тому +1

    Cool! Thanks for posting.

  • @scottamy6496
    @scottamy6496 Рік тому

    Freakin awesome job! I am definitely stoked to try this process out on mine! Great job!!!

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Thanks, feel free to send your end result on Facebook, I'd love to see it!!

  • @brawndothethirstmutilator9848
    @brawndothethirstmutilator9848 Рік тому +2

    The end result was sick! It’s like a marbled tiger stripe camo.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому +1

      Thanks, it was my first time using that method and I was very happy with the results!

  • @michaelkaiser1864
    @michaelkaiser1864 Рік тому

    Thats freaking brilliant!

  • @SnipeLoisirsTestsCustoms
    @SnipeLoisirsTestsCustoms Рік тому +1

    Beautiful your technique, man you're serious ✊🙏👍😉

  • @RipsawUSA
    @RipsawUSA Рік тому

    That looks really good

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Thank you!! I was very happy with it as well!.

  • @jackblackpowderprepper4940
    @jackblackpowderprepper4940 Рік тому +1

    Wow, I wasn't sure on this technique but that is awesome. Nice job.

  • @jayboogie27
    @jayboogie27 Рік тому +1

    That came out killer!! 🔥🔥

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Yeah it did, I'm very happy with the results. Thanks for the compliment!

  • @mjf1036
    @mjf1036 8 місяців тому

    well done! and the cleanest riffle in town.

  • @TheCarlzor
    @TheCarlzor 7 місяців тому

    I followed this tutorial while painting my glock! Super thrilled that the results was so good! A little excess paint on a few spots but in all very good! Thanks for sharing!

    • @3KindsOfGuns
      @3KindsOfGuns  7 місяців тому

      Awesome!! Feel free to send me pictures on Facebook @ 3 kinds of guns. And with your permission, I will share them!

    • @3KindsOfGuns
      @3KindsOfGuns  7 місяців тому

      Did you clear after? If it's your edc, I don't think it will last long.

  • @ironsights1809
    @ironsights1809 Рік тому +2

    That is one BAMF. Great job!

  • @joedavis1431
    @joedavis1431 Рік тому

    😮 badass! 👍 best home made paint job I’ve seen!

  • @LRRPRT90
    @LRRPRT90 10 місяців тому +1

    It works and looks great

  • @niighthawk
    @niighthawk 6 місяців тому

    Woah! That looks amazing ! GoodJob !

  • @CaliGuns556
    @CaliGuns556 Рік тому +1

    I just got done doing mine on my ar in 224 valkyrie looks amazing

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Send me a picture on Facebook! I would love to see it!
      facebook.com/3KindsofGuns

  • @andrewsperanzi4946
    @andrewsperanzi4946 Рік тому

    The finish came out amazing 👏 gonna be doing that to my ar47 build.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Thanks! I was super happy with how it came out!

  • @caseymelick8023
    @caseymelick8023 Рік тому

    simply amazing thank you

  • @brothersofthebackrow
    @brothersofthebackrow Рік тому

    Holy crap that’s well done!

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Thank you! Subscribe for the next one!

  • @rodfeher
    @rodfeher 8 місяців тому +1

    best DIY paint job on UA-cam

  • @threat2demoracy5454
    @threat2demoracy5454 Рік тому

    Yo! That is awesome! Just painted one of my Rifles couple weeks ago. Glad I held off on my others because I am definitely using this method! 👍💪✌

  • @brentstevens8207
    @brentstevens8207 Рік тому

    Very awesome, I am gonna have to paint my gun for the first time and use the soap method.

    • @3KindsOfGuns
      @3KindsOfGuns  Рік тому

      Awesome, send me a pic @3kog on Facebook when you do, I have posted a couple of subscribers results!

  • @keithosborne6585
    @keithosborne6585 Рік тому +1

    Reminds me of tiger stripe camo. Awesome job, brother!

  • @tl1635
    @tl1635 Рік тому

    I'm going to do my 450bm with this method (maybe not the lower receiver just incase I use it for something else). But the color and pattern you ended up with is perfect for me. It's a deer rifle.