Thanks for the video it really helped, luckily I read thru the comments and realized we needed an obd programmer to get camera to come on. Other than that I had a plug with power we tied into. But may tie into backup light power so camera isn't on full time.
Hey there Lee, thanks for checking out my video! I am glad it was able to help you out and sorry I if didn’t highlight the need to use the programmer to enable the camera. Glad you were able to figure it out and get it functioning!! 🤙🏼
I am a newbie to Jeep modifications in general and your great video (I plan to add a backup camera to a Jeep JK Unlimited as soon as I purchase one) raised a few questions. I hope you don't mind answering my questions. 1. What else can I use the OBDII for? 2. How do I purchase the ability to turn on the backup camera? You mention the VIN. 3. Does the backup camera you purchased display in color? 4. Does the backup camera you purchased have what I call "guide lines." I own a 2019 Cherokee which has the OEM camera and I am spoiled when backing up. 5. I'm planning a Spare Tire Delete and am looking to move the license plate to center of the 5th door, and mount the camera there, as well as have an integrated 3rd brake light to replace the OEM CHMSL. Any suggestions as to where to look, what's good, what's junk, et cetera?
Hey there Mark, Thanks for checking out my video! Let me see what I can do to answer these! 1. So the OBDII Bluetooth reader along with the J-Scan App can do a lot! I suggest you look at jscan.net/ to get more info on all it offers! 2. So you do not purchase the ability to turn on the camera but rather purchase a single vin license through the J-Scan App to program and adjust systems on that one registered vehicle. refer to the link for more info in my answer to item 1. 3. The camera and display paired together do show color, but at night it uses infrared I believe so it will be more of a gray scale. 4. it does have guidelines, but I do not believe that they are adjustable, nor do they move as you turn the wheel. They are very basic. 5. Honestly if you are looking for a recommendation for a certain manufacturer, I do not really have one. I think all of them out there are comparable, and it really comes down to what you like and are looking for in features. Some are basic, some have molle panels or modular mounting features so you really just need to go with what will fit your build the best! I hope my answers are able to give you some direction! let me know if you have other questions!
You route that on constant power. That means the backup camera is powered all the time. Not sure whether the 12V plug in the dash is keyed to the ignition, that at least would turn it off when the car isn't running. I'm probably going to hook the camera into the reverse lights, simply because having the camera on all the time isn't a good thing for that camera chip, particularly when it's hot out (I drive a lot in the desert, so having way over 120 degrees back there when exposed to direct sun wouldn't surprise me at all). Those kind of cameras usually use less than 150mA so the reverse light circuit should be able to handle that easily. Thanks for testing which one of the adapters it is - that saves time!
Thanks for checking out my video Uwe! That is correct it is constant powered and to answer you question it is keyed so it is only powered with the key in the ACC or On position. You make a fair argument about the total run time of the camera and heat, I had not thought about that! My main thought was I like to limit splicing into existing harnesses due to CAN signals being present. So with the jumper I picked up I was at least not impacting the factory harness. But I don’t see an issue with running off of the reverse lights, I would be curious if there is any lag for the image to come up beyond the display switching functions.
@@VictorVectorJKU I'll let you know how it turns out. Got the camera today and I'll post an update once I've installed it. I would guess that camera needs a little time to boot up - but then. maybe it's too short to notice. I'll know soon :-)
@@VictorVectorJKU Ok, got the camera installed. Hooking it into the back-up lights works perfectly. There is no delay whatsoever. I tried constant power and the backup light and both work exactly the same. You can tie into the backup light using the black and white/brown wire going into the grommet above the right rear light.
Good deal! I was thinking about the delay and mine is really more related to the time it takes the screen to change. But glad to hear you got it installed and thanks for the feedback!
Thanks for posting this video! Really helped on the pin connectors and which to use, my Wife’s JK is an automatic so not sure if that’s different from the manual you have also pretty sure she has the RHB radio with Nav which sounds like it should work, just need to see if I can find an option on the radios setup to turn on a camera or if I have to go the route you did with the blue tooth scan tool or take to the dealer. I have a feeling the dealer route won’t be favorable as I told her last time it got serviced to have them turn the option on and they said they need to know what type of camera it is, which I kind of doubt that matters but maybe. I got every thing wired in today using the number 2/3 pins, just need to get the computer to turn on the back up camera option and hopefully it works, wired it into the right rear tail light harness since we installed the trailer light pigtail off the left light and had the back end appart for both, had to long to the bracket upside down compared to yours and bend it as hers is a rubicon Recon edition and the bolt pattern to wheels spokes must be opposite of most jeep rims as all the spokes interfere with the camera location relative to stud clocking on the spare tire mount on the back door, not a big deal but took some finagling. Anyways thanks again for the video, may hit you back once we get the obd part turned on
Hey thanks for checking out my video and that is great to hear it was able to help you out! I am unsure the ability to edit settings with the Nav model versus using an OBD programming tool but I do not see why the dealer must know the make of the camera, it is purely a setting that must be enabled to allow the camera feed. (It should be a binary parameter in the ECU “enabled” or “disabled”) But good job on figuring out how to make it work with the wheel openings for the spare! Hopefully you can get this last bit complete and have the backup camera functioning!!
I must’ve missed it in the video. What camera kit did you buy from Amazon? I just bought a ‘17 Willys with the RBZ radio. Also, is there not a better keyed option than the cig wire? Great video!
Hey Upsman1313, thanks for checking out my video and congrats on the purchase! I have the link in the video description to the camera kit I purchased! As far as the power, anywhere that has constant power will work and possibly even the reverse lights since when you go into reverse the power would be supplied by it. I just decided to run power the way I did since I was going to route my cb antenna wire along that same path! Definitely let me know if you have any other questions!
When I plug in the obd, what do I do next? I’ve downloaded app, but can’t seem to find what I need to enable camera. Also, on my wiring, there is a lone red wire from yellow video plug. What do I do with that? I already have camera plugged in to positive and negative wires.
Hey there Upsman1313. So just to verify, you have purchased the license for your VIN on your Jeep in the JScan App, correct? Once you plug in the OBD reader and open the JScan app you will want to select your vehicle and pair to it. Then you will go to the adaptation menu > radio and camera - settings > rear camera on/off > select active from the drop down. As far as the lone red wire on the video cable, I believe it is included as a grounding wire. I did not do anything with it for my install. I think I just taped it to the video cable. I hope this helps you out!
Thanks! I finally figured it out. The first app I downloaded didn’t offer any way for me to add camera. I got the right app and everything works out. Thanks for the help!
Hey Victor. I haven't been able to figure out what camera you used. I can't find the link anywhere in the video. Would you mind sharing the particular brand/version used? or the link to the amazon store? Thank you.
Hey there Alex, thanks for checking out my video! I have the link in the video description, here is the link again for ease Help me decide on this product: Roadpower Car Backup Camera Rear View Camera Reverse Camera for Jeep Wrangler Spare Tire Mount 2007-2018 Waterproof Wide Angle Aftermarket Camera Removable Guidelines with OEM Monitor Adapter. a.co/d/7D0LgoX
I think it is decent, I think the limiting factor is more on the factory display resolution rather than the camera itself. But as long as you have good reverse lighting then it does well! I think for the low cost it is definitely worth it!
Hey there James, I am running the VeePeak BLE+ Veepeak OBDCheck BLE+ Bluetooth 4.0 OBD2 Scanner for iOS & Android, Car Diagnostic Code Reader Scan Tool for Universal OBDII/EOBD Vehicles www.amazon.com/dp/B076XVQMVS/ref=cm_sw_r_cp_apip_sqjBvLAtcssdX along with the JScan app on my phone. To be able to program using this combo you will need to pay for the VIN in the JScan app one time, it is totally worth it tho!
I have the same 2017 JKU, same RBZ radio, and same Roadpower camera. I also have a JSCAN license for my jeep and Veepeak OBD. When I scan for my camera and check the box it comes up false (with either Roadpower supplied connector on the back of the head unit). I also tried the 9V battery test with both Roadpower connectors). What am I missing? How can I get the head unit to see the camera?
Hey there KP, thanks for checking out my video and let’s see if we can figure this out! 1) when you shift into reverse does the head unit go black and state a warning message to the effect of “check your surroundings”? 2) how are you supplying power to the camera? 3) did you verify both connectors to the back of the head unit to ensure the correct pin out is being used? Get back to me with these 3 questions and we will proceed to the next steps!
My wifes JL has the option to turn on the backup camera while driving down the interstate. Is there an option with this radio to access the backup camera while not in reverse?
Hey Gary, thanks for checking out my video! For the JK, I have not found an option to turn it on unless you simulate reverse. I have also not really looked into it tho.
I thought it was pretty straight forward using the J-Scan App but I will give you the menus you need to navigate through! Once you have connected to the vehicle through the J-Scan app you will go to the Adaptation heading > Radio and Camera - settings > Rear Camera on/off > and select activate. I hope this helps make it easy for you!
Have you confirmed you have the head unit labeled RBZ? If yes and you have completed the install, have you enabled the back up camera feature in the ECU? You can do this by purchasing a Bluetooth OBD tool and the App JScan. This is what I did. You might also be able to go to a dealer and have them enable the feature.
Yes I have mine set up on constant power, I have had others comment that they are tapped in on the reverse light circuit and that works fine for them! I didn’t want to splice into the main harness tho so I ran extra wiring to my adapter for my 12v power outlet instead! I haven’t had any issues to this day with this strategy!
@@VictorVectorJKU Ok, so that tells me the head unit already has an input that knows when the car is in reverse, right? So no need for the additional red wire in tandem with the RCA jack. Also, could you tell me where you found the information on the U-connect head unit? Mine is like yours but is an RHR. Want to see if mine has video in capabilities too. I'm doing the same thing you're doing except with a 14 Challenger RT. Great to see people making this videos! It's been a big help, thanks!
@@rhandbhf4ever yes that is correct, or at least on my install, that the head unit has a connection with the reverse signal already. As far as the info on the compatibility of the head unit I just googled it and I don’t recall if I found a definitive answer so I kind of just went with it. But if you have an OBD programming tool you can check to see if you have a “camera enable” parameter you can turn on. Then when you put your vehicle in reverse you should get a black screen and a message until you hook up a camera. I hope this helps you figure out your head unit! And also thank you! That is what my channel is all about, sharing my experiences and knowledge to help out others and trying to get into more details than other channels may go into!
I will need some details of your install process and the issues you are having with the reverse camera not working. The first items to troubleshoot will be: 1. Are you using the correct connector to the back of the head unit? 2. Does the camera have an appropriate power lead hooked up? 3. Have you enabled the camera through the Jeep’s OBD port or had a car dealer enable it?
That is very interesting, I would suggest making sure the all the connections are made to the back of the radio unit. I am guessing a connector or power or ground came loose. The install should not have required any of those to be removed.
Thanks for the post. Question; If I have an RBZ radio in my Jeep (2015 JKU) I can add a backup camera and not have to have dealer "flash" system for it to work? Thanks
Hey PawPaw, thanks for checking out my video! You will need to program your ECU to enable the camera. You will need to follow the steps I outlined in this video to do so or have a dealer enable the reverse camera.
@@VictorVectorJKU I bought OBDII and got my radio set for rear camera, easy as that. Best $24 spent. Gonna try and finish my install this week. I went with license plate camera as I have cover over spar tire mount. I also noticed while looking on OBDII that head unit shows Nav option? Interesting. Thanks again
That’s awesome! I am glad my video helped you get it all set up! And interesting that you have a nav option, if you can enable it and it works that would be great!
That is interesting, If it isn’t the electrical also check and make sure that you’re using the correct adapter for the back of the head unit, that is if you are using the same camera as I did.
Yes you will need a n OBD programmer to activate the camera on the head unit. And about 11:47 is where I covered how I powered the camera off of the 12v socket. That is the red wire you are asking about right?
Hey there Brian, thanks for checking out my video! I trialed connecting both with power to the camera to see which one worked for me, I would suggest you do that same as I cannot recall which I used and your application may be different.
What if the RBZ head unit already had the backup cam enabled. The head unit came with my 2011 grand caravan and I removed it and installed it in my 2001 Durango SLT I figured out how to have video in motion without a lock pick or expensive aftermarket harness but I noticed you came with two white clips each with different locations for the camera input but the one I have goes to pin 2 and 3 but the camera is already enabled on the RBZ
Hey there Villi, thanks for checking out my video! That is sweet you found a way to enable the camera in motion! I need to figure that out sometime! So to make sure I understand correctly, you are trying to determine which plug u need to use? I had tried both to see which I needed to use based on the head unit’s pin out. Let me know if I am not answering your question correctly!
Hey there Jack, thanks for checking out my video! I believe I pulled power from the accessory 12v plug in the dash since I had added a second 12v plug to that circuit. I know others have pulled from the reverse lights as well so you only power the camera when in reverse.
Hey there Tim, thanks for checking out my video! I purchased the adapter and a 12v outlet off Amazon. The following links should take you there. Please note I did have to modify the adapter to connect to this specific outlet. I believe I just needed to add blade terminals to it so it would connect to the harness. a.co/d/3i7V60O a.co/d/20CMlYr
Here is the link if you have an iPhone. Otherwise search for “OBD JScan” in your App Store on your phone. The app will inform you of compatible Bluetooth readers. apps.apple.com/us/app/obd-jscan/id1445903514 The camera I have is fine, keep in mind the resolution of the screen will limit the clarity too.
@@VictorVectorJKU I'm kind of new to this. Do I need to still plug something in underneath the dash or can I do what I need to do just by using the app? I have a Google pixel 7 phone
No problem! You will need to follow the steps I outlined in the video to connect the camera to power and the radio, you will need the Bluetooth OBD reader off of Amazon or other sites and then the app on your phone will connect to it and you will need to find the parameter to enable the camera in the app. You will have to search your App Store for the JScan app since I expect the link I provided will not work for you. I hope this clarifies your questions!
I have a 2017 Wrangler JK with factory radio and navigation. The radio is an RHB. I bought the backup camera but can't get it to display on the factory radio screen. Do I need to unlock/program it? I have an OBD scanner but not sure how to do it using Jsacan. Might you be able to help?
So I am going to guess you will need to enable the reverse camera either through a programmer like the J-Scan app or you can take it to the dealer to have it enabled as well I believe. Being the RHB and having navigation maybe you can enable it through the touchscreen but I am unsure.
@VictorVectorJKU The camera wire has connectors, so I put a piece of wire into the red wire connector and attached it to a battery and put a wire into the black connector and attached it to metal in the car. I tried both adapters that came with the camera and neither works. What am I doing wrong?
@@VictorVectorJKU I got it working. I used a thin wire but did not know that wire was insulated! Thank you for your video. I hope I can finish the installation. This has saved me a lot of money! Thanks again!
Sorry for the delay! But Ok, following along your replies. Sounds like you got it enabled, and the issue was running power to the camera which it sounds like you figured out! Glad to hear you were able to troubleshoot and get it working!! And you bet, I started this channel to help out other fellow Jeepers with the upgrades I am doin!!
Yes, the camera function is controlled by the ECU’s of the vehicle which require programming to enable. When you shift your vehicle into reverse if your screen does not turn black or show the camera image if you have installed it then you must enable this function.
Hey there Dave, thanks for checking out my video! Help me understand your question better, what connection are we talking about, is it the power to the camera? Also what do you mean by “my wire says reverse power anode output” is this an error displayed on your screen?
Hey there Ivansterr, thanks for checking out my video! I actually fab’d up that bracket myself and yes it uses the two right fasteners for the radio head unit! I am not sure if there are aftermarket solutions that use the radio head unit hardware. I am only aware of the ones that use the left side of the passenger dash grab handle.
Hey there Seal.Team.Six. Thanks for checking out my video! So to be sure I am answering you question correctly, you are referring to the red wire coming out of the yellow video cable connection right? Or are you talking about the power and ground wires coming from the camera?
Hey there Obediah, I went with the VeePeak BLE+ here is a link! Veepeak OBDCheck BLE+ Bluetooth 4.0 OBD2 Scanner for iOS & Android, Car Diagnostic Code Reader Scan Tool for Universal OBDII/EOBD Vehicles www.amazon.com/dp/B076XVQMVS/ref=cm_sw_r_cp_api_glc_fabc_QcP-FbF8V2RPC?_encoding=UTF8&psc=1
Hey there Ginny! Thanks for checking out my video! The link is in the video description below the video. I have also copied it here for ease of access! www.amazon.com/gp/product/B0882S8L3L/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Why did you not have power in the back? I thought I saw all the same wires? I thought we were supposed to splice it in on the reverse tail light wire? Or does it need to be a constant power? Like the one for the dome lights?
Hey there Cory, thanks for checking out the video! And my only guess is this is a standard harness from the factory and where it is plugged into the main harness is not supported based on the trim level of the vehicle. Only specific options come with the 12v power off the right rear corner and mine was not wired to support that even tho the connector was there. I think you need constant power otherwise if your lights are off and you shift into reverse you will have a black screen. This is why I ran my power up to a constant power accessory.
Thanks Cory! I appreciate the support! And let me know if you have any other questions. I’m up in the woods this weekend but I can look more into how I wired the power when I’m back home if you like! Just let me know!
Ok so just to confirm you have the unit with navigation? From my understanding, you should be able to connect a back up camera like I did. You will of course need to or have the ECU programmed to enable the reverse camera. But this is a different unit than I have so I am not 100% positive.
Hey there Grupo, thanks for checking out my video! That wire is used as a signal wire that needs to be hooked up to a reverse signal wire. I chose not to use this functionality.
So installed everything and once I put my jeep in reverse i get nothing on the screen. The jeep came with the Bluetooth activated already but not sure if they also activated the back up camera might this be my problem that I need to activate it or should the radio screen change a certain color to all black even doe it hasn’t been unlocked for the back up camera or is there another problem Thanks🙏🏽
So Bluetooth is not the functionality you need. You need to purchase an OBD Bluetooth reader and I recommend using the J-Scan app from your phone’s App Store. You will need to purchase a license for the VIN of your vehicle in the app. Then you need to enable the backup camera function at which time the screen will change and show the backup camera.
Hey there John, thanks for checking out my video! I am not familiar with the obdgenie, I am guessing this serves a similar purpose as the J-Scan App and the Bluetooth OBD connector I purchased? I was able to complete the programming to enable the camera using these!
Yeah that’s a fair argument, I got used to using my side mirrors for backing up pulling trailers and driving a van without rear windows 🤷♂️ the Jeep is much easier than either of those
Thanks for the video it really helped, luckily I read thru the comments and realized we needed an obd programmer to get camera to come on. Other than that I had a plug with power we tied into. But may tie into backup light power so camera isn't on full time.
Hey there Lee, thanks for checking out my video! I am glad it was able to help you out and sorry I if didn’t highlight the need to use the programmer to enable the camera. Glad you were able to figure it out and get it functioning!! 🤙🏼
Love the video by the way, you explain everything else perfectly, thanks for the info.
Thanks a lot Cory, that means a lot!
I am a newbie to Jeep modifications in general and your great video (I plan to add a backup camera to a Jeep JK Unlimited as soon as I purchase one) raised a few questions. I hope you don't mind answering my questions.
1. What else can I use the OBDII for?
2. How do I purchase the ability to turn on the backup camera? You mention the VIN.
3. Does the backup camera you purchased display in color?
4. Does the backup camera you purchased have what I call "guide lines." I own a 2019 Cherokee which has the OEM camera and I am spoiled when backing up.
5. I'm planning a Spare Tire Delete and am looking to move the license plate to center of the 5th door, and mount the camera there, as well as have an integrated 3rd brake light to replace the OEM CHMSL. Any suggestions as to where to look, what's good, what's junk, et cetera?
Hey there Mark, Thanks for checking out my video! Let me see what I can do to answer these!
1. So the OBDII Bluetooth reader along with the J-Scan App can do a lot! I suggest you look at jscan.net/ to get more info on all it offers!
2. So you do not purchase the ability to turn on the camera but rather purchase a single vin license through the J-Scan App to program and adjust systems on that one registered vehicle. refer to the link for more info in my answer to item 1.
3. The camera and display paired together do show color, but at night it uses infrared I believe so it will be more of a gray scale.
4. it does have guidelines, but I do not believe that they are adjustable, nor do they move as you turn the wheel. They are very basic.
5. Honestly if you are looking for a recommendation for a certain manufacturer, I do not really have one. I think all of them out there are comparable, and it really comes down to what you like and are looking for in features. Some are basic, some have molle panels or modular mounting features so you really just need to go with what will fit your build the best!
I hope my answers are able to give you some direction! let me know if you have other questions!
You route that on constant power. That means the backup camera is powered all the time. Not sure whether the 12V plug in the dash is keyed to the ignition, that at least would turn it off when the car isn't running. I'm probably going to hook the camera into the reverse lights, simply because having the camera on all the time isn't a good thing for that camera chip, particularly when it's hot out (I drive a lot in the desert, so having way over 120 degrees back there when exposed to direct sun wouldn't surprise me at all). Those kind of cameras usually use less than 150mA so the reverse light circuit should be able to handle that easily.
Thanks for testing which one of the adapters it is - that saves time!
Thanks for checking out my video Uwe! That is correct it is constant powered and to answer you question it is keyed so it is only powered with the key in the ACC or On position. You make a fair argument about the total run time of the camera and heat, I had not thought about that! My main thought was I like to limit splicing into existing harnesses due to CAN signals being present. So with the jumper I picked up I was at least not impacting the factory harness. But I don’t see an issue with running off of the reverse lights, I would be curious if there is any lag for the image to come up beyond the display switching functions.
@@VictorVectorJKU I'll let you know how it turns out. Got the camera today and I'll post an update once I've installed it. I would guess that camera needs a little time to boot up - but then. maybe it's too short to notice. I'll know soon :-)
Awesome I look forward to hearing back from you! Good luck in your install!
@@VictorVectorJKU Ok, got the camera installed. Hooking it into the back-up lights works perfectly. There is no delay whatsoever. I tried constant power and the backup light and both work exactly the same. You can tie into the backup light using the black and white/brown wire going into the grommet above the right rear light.
Good deal! I was thinking about the delay and mine is really more related to the time it takes the screen to change. But glad to hear you got it installed and thanks for the feedback!
Thanks for posting this video! Really helped on the pin connectors and which to use, my Wife’s JK is an automatic so not sure if that’s different from the manual you have also pretty sure she has the RHB radio with Nav which sounds like it should work, just need to see if I can find an option on the radios setup to turn on a camera or if I have to go the route you did with the blue tooth scan tool or take to the dealer. I have a feeling the dealer route won’t be favorable as I told her last time it got serviced to have them turn the option on and they said they need to know what type of camera it is, which I kind of doubt that matters but maybe. I got every thing wired in today using the number 2/3 pins, just need to get the computer to turn on the back up camera option and hopefully it works, wired it into the right rear tail light harness since we installed the trailer light pigtail off the left light and had the back end appart for both, had to long to the bracket upside down compared to yours and bend it as hers is a rubicon Recon edition and the bolt pattern to wheels spokes must be opposite of most jeep rims as all the spokes interfere with the camera location relative to stud clocking on the spare tire mount on the back door, not a big deal but took some finagling. Anyways thanks again for the video, may hit you back once we get the obd part turned on
Hey thanks for checking out my video and that is great to hear it was able to help you out! I am unsure the ability to edit settings with the Nav model versus using an OBD programming tool but I do not see why the dealer must know the make of the camera, it is purely a setting that must be enabled to allow the camera feed. (It should be a binary parameter in the ECU “enabled” or “disabled”)
But good job on figuring out how to make it work with the wheel openings for the spare! Hopefully you can get this last bit complete and have the backup camera functioning!!
I must’ve missed it in the video. What camera kit did you buy from Amazon? I just bought a ‘17 Willys with the RBZ radio. Also, is there not a better keyed option than the cig wire? Great video!
Hey Upsman1313, thanks for checking out my video and congrats on the purchase! I have the link in the video description to the camera kit I purchased! As far as the power, anywhere that has constant power will work and possibly even the reverse lights since when you go into reverse the power would be supplied by it. I just decided to run power the way I did since I was going to route my cb antenna wire along that same path! Definitely let me know if you have any other questions!
When I plug in the obd, what do I do next? I’ve downloaded app, but can’t seem to find what I need to enable camera. Also, on my wiring, there is a lone red wire from yellow video plug. What do I do with that? I already have camera plugged in to positive and negative wires.
Hey there Upsman1313. So just to verify, you have purchased the license for your VIN on your Jeep in the JScan App, correct?
Once you plug in the OBD reader and open the JScan app you will want to select your vehicle and pair to it. Then you will go to the adaptation menu > radio and camera - settings > rear camera on/off > select active from the drop down.
As far as the lone red wire on the video cable, I believe it is included as a grounding wire. I did not do anything with it for my install. I think I just taped it to the video cable.
I hope this helps you out!
Thanks! I finally figured it out. The first app I downloaded didn’t offer any way for me to add camera. I got the right app and everything works out. Thanks for the help!
Hey Victor. I haven't been able to figure out what camera you used. I can't find the link anywhere in the video. Would you mind sharing the particular brand/version used? or the link to the amazon store? Thank you.
Hey there Alex, thanks for checking out my video! I have the link in the video description, here is the link again for ease Help me decide on this product: Roadpower Car Backup Camera Rear View Camera Reverse Camera for Jeep Wrangler Spare Tire Mount 2007-2018 Waterproof Wide Angle Aftermarket Camera Removable Guidelines with OEM Monitor Adapter. a.co/d/7D0LgoX
@@VictorVectorJKU Wow. I checked twice and somehow missed it. Anyhow, thanks a ton for the quick response and for the link :)
You are welcome! And yeah sometimes the display of the video description, depending on the device you’re using, can make it tricky to find info!
How is the picture at night ? Overall review since you installed it
I think it is decent, I think the limiting factor is more on the factory display resolution rather than the camera itself. But as long as you have good reverse lighting then it does well! I think for the low cost it is definitely worth it!
What scanner did you use? Wish I would have know this before I ripped out the dash... I'm pretty quick at it now though!
Hey there James, I am running the VeePeak BLE+ Veepeak OBDCheck BLE+ Bluetooth 4.0 OBD2 Scanner for iOS & Android, Car Diagnostic Code Reader Scan Tool for Universal OBDII/EOBD Vehicles www.amazon.com/dp/B076XVQMVS/ref=cm_sw_r_cp_apip_sqjBvLAtcssdX along with the JScan app on my phone. To be able to program using this combo you will need to pay for the VIN in the JScan app one time, it is totally worth it tho!
@@VictorVectorJKU yeahhhhh... Saw it in another comment right after my post. Just ordered it. Keep up the good work!
All good James! Thank you! Also thanks for checking out my video!
I have the same 2017 JKU, same RBZ radio, and same Roadpower camera. I also have a JSCAN license for my jeep and Veepeak OBD. When I scan for my camera and check the box it comes up false (with either Roadpower supplied connector on the back of the head unit). I also tried the 9V battery test with both Roadpower connectors). What am I missing? How can I get the head unit to see the camera?
Hey there KP, thanks for checking out my video and let’s see if we can figure this out!
1) when you shift into reverse does the head unit go black and state a warning message to the effect of “check your surroundings”?
2) how are you supplying power to the camera?
3) did you verify both connectors to the back of the head unit to ensure the correct pin out is being used?
Get back to me with these 3 questions and we will proceed to the next steps!
Hi I have tried several times to reply but they dint post
That’s strange… if you would like you can send me a direct message through Instagram if you have that. My account is victorvectorjku there
My wifes JL has the option to turn on the backup camera while driving down the interstate. Is there an option with this radio to access the backup camera while not in reverse?
Hey Gary, thanks for checking out my video! For the JK, I have not found an option to turn it on unless you simulate reverse. I have also not really looked into it tho.
I just got an OBD. Any tips on how to do this best? Or is it pretty straight forward in the app how to activate the camera
I thought it was pretty straight forward using the J-Scan App but I will give you the menus you need to navigate through!
Once you have connected to the vehicle through the J-Scan app you will go to the Adaptation heading > Radio and Camera - settings > Rear Camera on/off > and select activate.
I hope this helps make it easy for you!
Hello, how are you? I have a problem when shifting into reverse gear, the radio will not work on the camera
Have you confirmed you have the head unit labeled RBZ? If yes and you have completed the install, have you enabled the back up camera feature in the ECU? You can do this by purchasing a Bluetooth OBD tool and the App JScan. This is what I did. You might also be able to go to a dealer and have them enable the feature.
So does your back up camera have constant power? Usually they're powered by the reverse light circuit.
Yes I have mine set up on constant power, I have had others comment that they are tapped in on the reverse light circuit and that works fine for them! I didn’t want to splice into the main harness tho so I ran extra wiring to my adapter for my 12v power outlet instead! I haven’t had any issues to this day with this strategy!
@@VictorVectorJKU Ok, so that tells me the head unit already has an input that knows when the car is in reverse, right? So no need for the additional red wire in tandem with the RCA jack. Also, could you tell me where you found the information on the U-connect head unit? Mine is like yours but is an RHR. Want to see if mine has video in capabilities too. I'm doing the same thing you're doing except with a 14 Challenger RT. Great to see people making this videos! It's been a big help, thanks!
@@rhandbhf4ever yes that is correct, or at least on my install, that the head unit has a connection with the reverse signal already. As far as the info on the compatibility of the head unit I just googled it and I don’t recall if I found a definitive answer so I kind of just went with it. But if you have an OBD programming tool you can check to see if you have a “camera enable” parameter you can turn on. Then when you put your vehicle in reverse you should get a black screen and a message until you hook up a camera. I hope this helps you figure out your head unit! And also thank you! That is what my channel is all about, sharing my experiences and knowledge to help out others and trying to get into more details than other channels may go into!
@@VictorVectorJKU Thanks again!
I have the same RBZ radio in my 2014 Dodge Avenger. Would this work if i wanted to add a backup cam?
Hey there Luigichan5043, thanks for checking out my video! I do not know for a fact but I would assume it should work.
@VictorVectorJKU I'm going to try, and I'll let you know if it does work .. I'm just waiting on the video plug. All ready have jscan and obd2
Awesome! I look forward to hearing how it works out!!
Awesome! I look forward to hearing how it works out!!
@@VictorVectorJKU update.... It worked!!
Hello, I have such a radio for a Dodge car. When installed on my Jeep Wrangler, it does not work. What is the solution?
I will need some details of your install process and the issues you are having with the reverse camera not working. The first items to troubleshoot will be:
1. Are you using the correct connector to the back of the head unit?
2. Does the camera have an appropriate power lead hooked up?
3. Have you enabled the camera through the Jeep’s OBD port or had a car dealer enable it?
How can I turn on your radio on my Jeep Wrangler? After installing the wires, the radio does not work. Please help me
That is very interesting, I would suggest making sure the all the connections are made to the back of the radio unit. I am guessing a connector or power or ground came loose. The install should not have required any of those to be removed.
Thanks for the post. Question; If I have an RBZ radio in my Jeep (2015 JKU) I can add a backup camera and not have to have dealer "flash" system for it to work?
Thanks
Hey PawPaw, thanks for checking out my video! You will need to program your ECU to enable the camera. You will need to follow the steps I outlined in this video to do so or have a dealer enable the reverse camera.
@@VictorVectorJKU I bought OBDII and got my radio set for rear camera, easy as that. Best $24 spent. Gonna try and finish my install this week. I went with license plate camera as I have cover over spar tire mount. I also noticed while looking on OBDII that head unit shows Nav option? Interesting.
Thanks again
That’s awesome! I am glad my video helped you get it all set up! And interesting that you have a nav option, if you can enable it and it works that would be great!
@@VictorVectorJKU Definitely gonna enable the Nav and see. Gotta redo the wiring at taillight, as I have no scene, just black screen
That is interesting, If it isn’t the electrical also check and make sure that you’re using the correct adapter for the back of the head unit, that is if you are using the same camera as I did.
Do I need an OBD for the cam to work? Also, where did you connect the red wire that comes off the video wire from the back of the radio?
Yes you will need a n OBD programmer to activate the camera on the head unit. And about 11:47 is where I covered how I powered the camera off of the 12v socket. That is the red wire you are asking about right?
Which of rhe 2 connectors did you use?
Hey there Brian, thanks for checking out my video! I trialed connecting both with power to the camera to see which one worked for me, I would suggest you do that same as I cannot recall which I used and your application may be different.
What if the RBZ head unit already had the backup cam enabled. The head unit came with my 2011 grand caravan and I removed it and installed it in my 2001 Durango SLT I figured out how to have video in motion without a lock pick or expensive aftermarket harness but I noticed you came with two white clips each with different locations for the camera input but the one I have goes to pin 2 and 3 but the camera is already enabled on the RBZ
Hey there Villi, thanks for checking out my video! That is sweet you found a way to enable the camera in motion! I need to figure that out sometime! So to make sure I understand correctly, you are trying to determine which plug u need to use? I had tried both to see which I needed to use based on the head unit’s pin out. Let me know if I am not answering your question correctly!
How so ??? Did you figure out the camera in motion.
Where did you get the power cable?
Hey there Jack, thanks for checking out my video! I believe I pulled power from the accessory 12v plug in the dash since I had added a second 12v plug to that circuit. I know others have pulled from the reverse lights as well so you only power the camera when in reverse.
Where did you get the adapter for the lighter
Hey there Tim, thanks for checking out my video! I purchased the adapter and a 12v outlet off Amazon. The following links should take you there. Please note I did have to modify the adapter to connect to this specific outlet. I believe I just needed to add blade terminals to it so it would connect to the harness.
a.co/d/3i7V60O
a.co/d/20CMlYr
Did you have to flash the OBD too to make it work?
Hey there Steve, thanks for checking out my video! Yes I had to enable a parameter using the J-Scan App and a Bluetooth reader!
@@VictorVectorJKU The Camera u used is the quality okay and do you have a link of the j scan that you used
Here is the link if you have an iPhone. Otherwise search for “OBD JScan” in your App Store on your phone. The app will inform you of compatible Bluetooth readers. apps.apple.com/us/app/obd-jscan/id1445903514
The camera I have is fine, keep in mind the resolution of the screen will limit the clarity too.
@@VictorVectorJKU I'm kind of new to this. Do I need to still plug something in underneath the dash or can I do what I need to do just by using the app? I have a Google pixel 7 phone
No problem! You will need to follow the steps I outlined in the video to connect the camera to power and the radio, you will need the Bluetooth OBD reader off of Amazon or other sites and then the app on your phone will connect to it and you will need to find the parameter to enable the camera in the app. You will have to search your App Store for the JScan app since I expect the link I provided will not work for you. I hope this clarifies your questions!
I have a 2017 Wrangler JK with factory radio and navigation. The radio is an RHB. I bought the backup camera but can't get it to display on the factory radio screen. Do I need to unlock/program it?
I have an OBD scanner but not sure how to do it using Jsacan.
Might you be able to help?
So I am going to guess you will need to enable the reverse camera either through a programmer like the J-Scan app or you can take it to the dealer to have it enabled as well I believe. Being the RHB and having navigation maybe you can enable it through the touchscreen but I am unsure.
@@VictorVectorJKU
I just enabled it but I am not getting the camera to work. The screen comes up with check your surroundings.
@VictorVectorJKU
The camera wire has connectors, so I put a piece of wire into the red wire connector and attached it to a battery and put a wire into the black connector and attached it to metal in the car. I tried both adapters that came with the camera and neither works. What am I doing wrong?
@@VictorVectorJKU
I got it working. I used a thin wire but did not know that wire was insulated!
Thank you for your video. I hope I can finish the installation. This has saved me a lot of money! Thanks again!
Sorry for the delay! But Ok, following along your replies. Sounds like you got it enabled, and the issue was running power to the camera which it sounds like you figured out! Glad to hear you were able to troubleshoot and get it working!! And you bet, I started this channel to help out other fellow Jeepers with the upgrades I am doin!!
This was an easy setup. Be sure that you have an OBD scanner to activate the camera.
Yes, Definitely necessary if it isn’t already activated! Thanks for checking out my Video Kristie!
what do you mean by activate camera with OBD @@VictorVectorJKU
Do I have to do something else?
Yes, the camera function is controlled by the ECU’s of the vehicle which require programming to enable. When you shift your vehicle into reverse if your screen does not turn black or show the camera image if you have installed it then you must enable this function.
Did you use the red wire that comes out at the audio connector end? My wire says reverse power anode output.
Hey there Dave, thanks for checking out my video! Help me understand your question better, what connection are we talking about, is it the power to the camera? Also what do you mean by “my wire says reverse power anode output” is this an error displayed on your screen?
Tried to send you a pic, but can’t send. I think I got it figured out. Thanks again for the helpful video.
Ok sounds good, glad to hear you figured it out! If not you can reach out to me through Instagram and you can DM me a picture there!
Where can I get that dash mount where you had your CB? looks like it's attached to the radio mounting bolts?
Hey there Ivansterr, thanks for checking out my video! I actually fab’d up that bracket myself and yes it uses the two right fasteners for the radio head unit! I am not sure if there are aftermarket solutions that use the radio head unit hardware. I am only aware of the ones that use the left side of the passenger dash grab handle.
@@VictorVectorJKU thought so, thanks for the reply, I'll have to make one for myself as well
There you go!!
what wire did you connect the sinlge red wire to behind the head unit
Hey there Seal.Team.Six. Thanks for checking out my video! So to be sure I am answering you question correctly, you are referring to the red wire coming out of the yellow video cable connection right? Or are you talking about the power and ground wires coming from the camera?
Hello. What OBD II did you buy? Can put a link in for that. Thank you.
Hey there Obediah, I went with the VeePeak BLE+ here is a link! Veepeak OBDCheck BLE+ Bluetooth 4.0 OBD2 Scanner for iOS & Android, Car Diagnostic Code Reader Scan Tool for Universal OBDII/EOBD Vehicles www.amazon.com/dp/B076XVQMVS/ref=cm_sw_r_cp_api_glc_fabc_QcP-FbF8V2RPC?_encoding=UTF8&psc=1
@@VictorVectorJKU thank you so much.
@@obediahanderson788 you are very welcome!
What camera did you buy and install? I can’t find the link for that..
Hey there Ginny! Thanks for checking out my video! The link is in the video description below the video. I have also copied it here for ease of access! www.amazon.com/gp/product/B0882S8L3L/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
@@VictorVectorJKU thank you so much! I’m going to give it a go next week! Wish me luck!
Awesome! I hope it goes smooth for you! Let me know if you have any questions through the process!
@@VictorVectorJKU can’t get my OBD to program
I figured it out. I had to download JScan and it’s working now. Thank you!
Why did you not have power in the back? I thought I saw all the same wires? I thought we were supposed to splice it in on the reverse tail light wire? Or does it need to be a constant power? Like the one for the dome lights?
Hey there Cory, thanks for checking out the video! And my only guess is this is a standard harness from the factory and where it is plugged into the main harness is not supported based on the trim level of the vehicle. Only specific options come with the 12v power off the right rear corner and mine was not wired to support that even tho the connector was there. I think you need constant power otherwise if your lights are off and you shift into reverse you will have a black screen. This is why I ran my power up to a constant power accessory.
@@VictorVectorJKU I get it now. Thanks so much. Looking forward to watching the rest of your videos, love your jeep👍🏼
Thanks Cory! I appreciate the support! And let me know if you have any other questions. I’m up in the woods this weekend but I can look more into how I wired the power when I’m back home if you like! Just let me know!
I had no idea Ashton Kutcher owned a Jeep!
I don’t know if I understand what you mean? 😅
@@VictorVectorJKU You look like him.
Oh haha well thanks 😎
I have a 2013 with the factory radio will this work for me
Do a favor for me and look at the lower right corner on the face of the unit, if it shows RBZ on the face then yes it should work.
Mine is rhb
Ok so just to confirm you have the unit with navigation? From my understanding, you should be able to connect a back up camera like I did. You will of course need to or have the ECU programmed to enable the reverse camera. But this is a different unit than I have so I am not 100% positive.
What you do with the red wire on the video connector side on the back of the stereo
Hey there Grupo, thanks for checking out my video! That wire is used as a signal wire that needs to be hooked up to a reverse signal wire. I chose not to use this functionality.
@@VictorVectorJKU great thanks for the quick reply
@grupohastaelfinluchare9418 you’re welcome!
So installed everything and once I put my jeep in reverse i get nothing on the screen. The jeep came with the Bluetooth activated already but not sure if they also activated the back up camera might this be my problem that I need to activate it or should the radio screen change a certain color to all black even doe it hasn’t been unlocked for the back up camera or is there another problem Thanks🙏🏽
So Bluetooth is not the functionality you need. You need to purchase an OBD Bluetooth reader and I recommend using the J-Scan app from your phone’s App Store. You will need to purchase a license for the VIN of your vehicle in the app. Then you need to enable the backup camera function at which time the screen will change and show the backup camera.
No obdgenie?
Hey there John, thanks for checking out my video! I am not familiar with the obdgenie, I am guessing this serves a similar purpose as the J-Scan App and the Bluetooth OBD connector I purchased? I was able to complete the programming to enable the camera using these!
Yea fuck this noise. Jeep cheeped out on the no back up cam.
I don’t think it was a DOT requirement for 2015, so it would been an option if offered
@@VictorVectorJKU with the poor vis backing up it should have been.
Yeah that’s a fair argument, I got used to using my side mirrors for backing up pulling trailers and driving a van without rear windows 🤷♂️ the Jeep is much easier than either of those