How to make 2g 3g 4g (5g ready) antenna || Signal booster at home || by "the techie tech"
Вставка
- Опубліковано 29 сер 2024
- WARNING: ALL YAGI STRUCTURED ROOFTOP ANTENNAS ARE AT RISK OF SURGE DURING LIGHTNING, THEY DON'T ATTRACT LIGHTNING BUT AT LIGHTNING CONDITION, IT IS SUGGESTED TO TURN OFF ALL EQUIPMENTS INCLUDING EXTERNAL ANTENNAS AND SIMILAR EQUIPMENTS. HERE WE ASSUME THAT ALL VIEWERS ARE WELL EDUCATED TO ELECTRIC EARTHING SYSTEM AND CURRENTLY WELL GROUNDED ALL ANTENNAS. HERE WE DON'T TAKE ANY RISK OF HARM DONE BY IMPROPER EARTHING AND CARELESS ENGINEERING.
PLEASE SUBSCRIBE TO OUR CHANNEL.
This 2g 3g 4g (5g ready) network antenna covers frequencies from 600 mhz to 2600 mhz.
features:
* covers worldwide standard frequencies.
* no power required.
* is almost wireless, no need to plug in phone or data device. just attach and go.
*design is awesome, like factory made.
*low making cost, almost all materials are found at our homes.
*easy to build. minor science knowledge required.
*boost signals up to 16 db.
it supports all 2g 3g and 4g bands worldwide.
as mentioned it is 5g ready, it will work on this frequency (2.6 ghz and above) with minor adjustments on its elements and amplifier (ampedence matching)
In my case, i tested on very interior area with hilly geography and nearest cell tower is approx 35 to 40 KMS away from the testing site.
If you are wondering where to get copper foil watch this video • get free copper and al...
THINGS NEEDED TO BUILD THIS ANTENNA
1- BOOM (square pipe of approx 2.5x2.5 cm length=45 cm goo.gl/VBPN8X
2- ELEMENTS (alluminium tube of 6mm diametere=8pcs) goo.gl/HRgSH6
3- REFLECTOR (alluminium sheet) goo.gl/x4CbBi
4- FOLDED DIPOLE (allumnium sheet 1cm width , 25 cm length)
5- IMPEDENCE AMPLIFIER (plastic or PCB board)
6- CIRCUIT (copper foil) If you dont know where to get it watch here goo.gl/JG3pCG
7- DISH CABLE goo.gl/9GP9QC
8- CABLE JOINTER/CONNECTOR
9- STRONG GLUE
10- SCREWS 10 PCS goo.gl/jvZiK7
11- NUT BOLTS 3mm 6pcs
Most useful in regions with poor or no signal areas.
PLEASE SUBSCRIBE TO OUR CHANNEL.
by "the techie tech"
I assembled this antenna, n this is realy working magically. There was no signal where I sit in my college. Now the giofy dongle is showing green light means it is catching 4g signal. Good work, keep it up.
Thank you so much, at least by reading your feedback, some critics will get a lesson who shout at us without trying it.
Sir, plz tell me from where you have got all this items.
Do you know what all carriers it works with?
This is one of the best video construction presentations I've ever seen! It's easy to follow and the music is great! You have motivated me into building this for my weak 5G cell reception. Thank you for a well done video.
I hardly subscribe to UA-cam channels but I couldn't stop myself from subscribing to your channel and adding a comment. I have watched some 5 videos of yours. I will also try making one for myself as the place where I am, needs something like this. Thank you so much.
Rhonal Femaa very glad to know that our contents are helping people. Stay tuned for more attractive and helpful videos. This is just the begning. Your support is the very thing which keeps us alive. Thankyou.
Greatings from Chile, excellent antenna !!!
Congratulations for your work
Thanks for compliment! Watch out this antenna too ua-cam.com/video/huF3yr2T2Yo/v-deo.html
Stay tuned...
Hola jano tambien soy de chile pudiste hacer esta antena, te funciono y si es asi donde conseguiste las piezas
@THE TECHIE TECH Worked perfectly for Jiofi 👍.
Thank you.
This works ewen if anything is not exactly some. But you have to put device close to 8nsoor antenna. Sometimes ewn random antennas too work anyway, as cable transmits rf signal down ewen with lotsof losses at end it still works.
I want to replace hub with some element which can transmit received signal in near by area so that more than one user can be benifited with this antenna. So please suggest some trick. I hane uhf amplifier ready with me.
Now i get 8G network. Great job bro.
Is this compliment or ???
Kya tum majak uda rahe ho? Maine banaya hai sahi me Kam karte Hain.
@@THETECHIETECH im not complaining, i like it because you make video with proof
Thanks bro! 😀😀😀
i'll try this. Love u dude/dudes. I'll tell how it went in a few days
You promised to try this? Did you?
Yeah did u?
Hi, very nice. I badly need this. Can
you please sell? Or give me Amazon link?
I appreciate
You guys are doing wonders trust me.
bro i want the signal to be available everywhere inside my home, may i know how to achieve it?
And you mentoined it costs 300 but the links u have mentioned makes the cost higher can u suggest us some other places to buy elements..
There was this little tubular piece/item that was inserted in the middle of the black plastic/amplifier. Was that rubber or plastic? Metal? Is it suppose to have a contact with the aluminum pipe?
It was metal. Purpose is to make contact with metal and also hold the circuit on position. Thanks
Very good project. I liked it
+indranath singh thankyou very much.
Whether it will work or not but he cleverly eaten half an hour by keeping every material list on video instead of posting in description box...good idea!
You could upload the design of the circuit to replicate, you can make a PCB, the amplificier impedance can be made bigger to distribute the signal inside a room
We have already posted this video ua-cam.com/video/BL5AqSWkBK4/v-deo.html regarding.
Amazing. Greate work. Only one thing i still want to know sir. Hope you can help me with this. Lightning is all my concern because it is the common phenomenon in our place. And i plan to add an earth ground but dont know the standard measurement of materials to use.
Nice
Copper wire. A large gage maybe 2 gage wire or larger since you'll be dealing with a rather large amount of electricity. Put that directly into the dirt and lead it to a metal rod at the top of the pole.
I was wondering if u can make an antenna that will allow multiple device to connect at a time because now everyone has a jio sim and it will be helpful if all of them can connect at the same time. Appreciate your work though.
Thanks, will try next time. BTW,good idea👍
Very good video. I am getting signal in my office but I am not getting speed. Cell operator said that it is because numbers of users and heavy traffic signal on tower in my area. How can get high speed? Is it useful in my case? Please make video omni antenna.
Good work !!!
I have 2 qns.
1. Do we get this readymade in Indian market/online? Atleast the outdoor antenna?
2. Will it work with the old type Doordharshan outdoor antenna set?
Hi, to your questions, this model will definately not get in market. Other models are available in amazon.in
And second, cell networks uses high frequency, and for high frequency elements having diameter less than 7mm are preffered. However doordarshan antenna elements can be used. But they are less effective. You can watch the video 850mhz signal booster which we have made with doordarshan antena elements. The results you will see and understand. Thankyou
hi nice attempt I was wandering a solution for getting 4g signal in my house I am using vodafone network because when I reach rooftop I am getting signal but inside my house and the surrounded area nothing so if I make an antenna same like you are showing in this video does it work? 😉😉😉thanks
Most welcome sir, please watch our other videos too. Solution is more easier than it seems.
Hello,
If I replace mobile network pad with dual band repeater and internal antenna for inner house boosting allowing benefit to all handheld devices within the coverage.
I currently use a coax external antenna for 4G but your design should help getting more frequencies if 4G signal is weak.
Will this help?
Yes it will work, I am also planning for doing that, ordered on AliExpress
Can a ready made tv anteena {the one's we used to watch doordarshan years back} work in similar way for boosting signal
Yes bro, after making some modifications you can easily do that.
Its all about frequencies
Good stuff man, keep it up.
Thankyou very much.
Is the foil pattern in mobile hub is shorted altogether or split in the middle or somewhere making separate from each other. Thanks for such video.
+Uttam Kumar Athokpam
Thanks for feedback. Actually foil is simple series with two ends, one with negative and other positive. It is shorted. But I have tested with split in centre, it works perfect as well.
If you are intrested , please watch our other video➡ homemade 1800 MHz signal booster, there I have simply bent the cable wire at mobile hub. But is working perfect. Have a look at it.
THE TECHIE TECH, thank you very much for yr quick response & happy indeed to Watch yr referral video. Thanks again.
अच्छा होता अगर ऑडियो के साथ वीडियो बनाया होता ....बीच में कई जगह , ऑडियो की जरुरत महसूस की गई है ....बाकि इस एंटेना की जरुरत बहुत लोगो को है ....
Hi.. The Techie Tech. Can you please suggest where I can buy this. I dont want to make myself. Checked in Amazon they are not of same specifications suggested by you.
hi bro, thx for sharing. i have any question,
what is frequency cut off for this antenna ?
can u share the design and size of each microstrip amplifier and mobile hub.
Thaks a Lot
It's working awesome sir thank u sir
I got to admit, I don’t understand rf antennas at all, it obviously works, but to me it looks like you’re just shorting everything out the hard way
And I used 0.8mm thicness copper foil for hub and amplifier.
Mr. Techie your video tutorial is awesome,but does it work without a Repeater Signal Amplifier? ,like we seen in online product in a full set of signal booster.
It works without signal repeater bro, it works as shown in video. No power source required. Con is you have to keep mobile or router attached.
Will this work in our areas where cellsite is not visible in sight(20 km) because there are hills covering our location. Cellphone has signal 2G and also has 3G when forced but very weak connection
Hi, Thanks for your videos. This is the yagi antena right? If yes, One quick question. Are this parasite elements electrically connected together(shorted) or insulated? As per I read its should insulated. Am I wrong? Any idea how still this works?
Not insulated bro,
And you are right, Yagi can be of both types insulated or non insulated.
You can measure its lengths with Yagi calculator
excellent work
Thankyou, stay tuned
Bhai jinko is video ki jarurt hai vo to ise dekh hi nahi payenge kyoke unke ghar ke pass to range hi nahi hogi
Sir in my home I'm getting signal in one room but not in another room so which antenna or technique should be used.
Can you tell me if I want to buy a Yagi antenna ,then which one suits better for Airtel Network.
Seems like you know what your doing next time pick a different background one that doesn’t mess with one’s vision. Would be great if I still got high.
Super. I like. Thanks
Welcome!
Your video really nice
Excellent video, very clearly. I have a question, this antennan works in all frequencies band? include AWS?. Thank you.
Thanks, yes it covers frequencies from 600 to 2600mhz
Bro i have some doubt...can u send your mail id.
Thanku
@@THETECHIETECH does the mobile hub need specific design and measurement (length x width) based on the targeted frequencies? Or i can use any design and measurement?
Hub should be at specific design, good enough to spread the received signal from antenna. Its not specefied for each design, you can use any of them, but we try to make short length hub for larger frequencies.
Bhai external antena j sath internal receiver hota to maja aa jata
Cable ko room me har jagah thodi na lekar ghoomenge wifi ki jaisi koi technic dhundo
Jo antena se signal khich kar room me signal failaye
Tar se chipkane ki jarurat na pade
अगर ये सच मे काम कर्ता है तो बहुत बढ़िया जुगाड़ है.
तो क्यू ना इसी को और बड़ा यानी size मे और बड़ा बना दो. ताकी और अच्छा signal पकड़े.
और हा थोड़ा और आसान तरीके से बड़ा signal रिसीवर बनाओ.
और क्या पुराने tv के रिसीवर मे कुछ बदलाव कर के ये नहीं बना सकते हैं.
अगर हा तो एक विडियो बना दो बड़ी maherbani होगी....
Thanks 2 you...
यह इतना आसान नहीं है, यह हमेशा सच नहीं है कि एक बड़े एंटीना के निर्माण में अधिक संकेत होता है, यह लंबी तरंगों के लिए सच है और मिलीमीटर तरंगों के लिए नहीं। यदि एक बड़ा एंटीना बनाने का मतलब है कि परिष्कृत इंस्ट्रूमेंटेशन और नेटवर्क एनालाइजर के साथ न किया जाए तो अधिक सिग्नल लॉस होता है। Ciao
Does it work in thunder and lighting day without putting your house appliances in a danger?
I like your video
I really wonder if you could do this with an ethernet cable rather than coaxial...
Great video
Thanks for compliment, hope you like our other videos as well.
what are the frequency ranges this antenna is working on? is it covering all ranges of GSM band
I will be making the Amp and Hub with etched printed circuit board rather than using foil. Hopefully this should be OK?
Patched circuit board is always first choice. Foil is secondry as it is easily available. Good luck and thanks
Can you please also tell me if the coaxial cable should be 50 ohm or 75 ohm?
Less the resistance, better the strength.
THE TECHIE TECH I was referring to the impedance of the coax ie, the design parameters, not the resistance of the conductor within. For Amateur Radio we used 50 ohm coax to match the antenna with the radio transmitter output. For TV, we always tend use 75 ohm. I guess it's not critical with this unit.
As i replied prior to one of our valuable viewer, that universal measurement af almost every antenna in our video is matched to 50 ohm. 50 ohm cable willbe ok.
Can this Antenna be plugged directly into Device with external antenna port and can it be made to only send receive 2G. have a gate controller that is slaved to the 2G network. I am so excited to build this unit.
I imagine that you could attach that to any type of store bought hub device and still work.
nice
Sir what should be the modifications if I want to use it for 2300 MHz i.e. for jio 4g band 40 frequency... T.Q.
Sir, this antenna is all in one, it covers all range currently available in india.
I want one to give one to people stay in remote area facing issues in online studies.Can you sell them
Nice
I believe in you and iam going to make it,, is it really works❓ plzzz reply
Yes
nice video.. make video on fm radio signal booster too...
Ok sir, we will try
Can a matching transformer be used for this build
Los tubos de aluminio tienen que ser exactamente de 6 mm? Hice una pero no encontré tubos de 6 mm, solo de 10 mm y no funciona
Please comment in english
THE TECHIE TECH Can I replace the 6mm aluminum tubes with 10mm tubes? Thank
charllie Cel if you replace 6mm with 10mm, all dimensons and placements of elements will change.
THE TECHIE TECH Thank you very much for answering. regards
Welcome, if you really want to make with 10mm, search google for online yagi antenna calculator. Use the calculated mesurements.
Can you send me the ready made kits(without the cable), I'll assemble it myself
Can I please have the dementions of everything and a materials list,thanks,Daniel Hoxit
Please check video description, everything is mentioned.
@@THETECHIETECH Worked perfectly for Jiofi 👍.
Thank you.
search for andre mcneil, you will learn a lot about antenna.
Hello, is this type of antenna compatible to serve as a wifi modem antenna? Thank you
What do you recommend to use for the cable of 75 or 50 omh
Can someone tell me if I can make this all out of copper?
Sir can I use copper tube 6mm over aluminium plz sir tell me reply plz
you have the circuit plan that goes in the box and the
for making mobile hub
Mobile hub is actually roughly measured sesistance made of copper foil, you can also make it by just bending cable inner wire. Check 1800mhz antenna. The hub is simply awesome and easy
Thanks, How multiple user can use this at a time & the max height for placing the antenna
We havent tried maximum numbers of clients at a time, but we made a hub with three ports, all worked fine. We assume that more clients can be attached at a time.
Height doesnt matter, just keep in mind that the antenna should recieve sufficient signal and be free from obstacles like buildings etc.
I kept I used cabe TV dish wire black one.. is it ok
Yes i used in video is same
Please tell me this is mobile battery at the end of the video ?
What is better this one or yagi for long range? Please make one antenna for long range 😁
30-40 kms is not short range bro, if you make this antenna correctly, it must cover 30 to 40 kms away.
as per your request, we will try to make more powerful antenna with more elements. thankyou
THE TECHIE TECH tanks bro, tomorow i go to my village, i will try this antenna 😁
If every measurements are ok, it will really rock😊😊😊
Is the 6mm diameter of aluminium tube means the outer diameter or inner diameter ?
And please tell me about the wall thickness of the tube.....
It is outer diameter sir. Wall thickness is 2mm
@@THETECHIETECH do it need using 6 mm? How about 8 mm, can i still use it?
No sir, design is for 6mm elements.
Excuse me, all the alluminium stuff has to be eloxiertes aluminium?
sorry for my translate, the word "adonizar" was translated to German and that's why the "eloxiert". (I speak spanish) Ok...
"Excuse me, all the alluminium stuff has to be anodized aluminum?" i hope that's right
We have used normal old tv antenna tubes, and not anodised.
Oh thats ok bro.
Hi Bro, I need this kind of signal booster please tell me the cost now i believe you will make some more latest technology
Can i use metal/aluminium mast instead of bamboo?
you can order one from walmart that does your whole house for less then the material costs
bro, there is no wallmart or flipkart in my village
So what frequency range does this operate on?
Why not add amplifier to increase the dbi gain?
Its working for me but, sir next time try without hub as everytime we need to attach it. Is there any possibility without hub also it can push network in room inside.
Internate speed increases??
@@adityadev958 Yes its increased by 3-5 mbps, and network got stable. Before 4-6 mbps now im getting 8-11 mbps speed, as network got stable.
How much you invested on it
@@adityadev958 600rs
Sim k signals ko b improve krta hy?
In my area jio network and internet is poor...Will it improve internet speed ?? Plz reply...
What case u used for box??
What if we buy a TV antenna 📶 will it work the same if we convert it
If dimensions are correct, it will work. But network are best suited at 3 to 7mm elements.
would this be considered 1/4 wavelink, 1/2 wavelink or full wavelink?
1/4
Me sare video watch karngga like vi karongga thik h
nice music
At 6:48 What did you use and how do I get it?
super
Thanks for compliment! Enjoy more amazing videos by subscribing and clicking the bell icon.
If i use aluminium foil in place of copper foil
Will it work?
No.
It's works on hills Area's?
Ap is tarah ke aur video banao
I have make it, cant work with hub, but work if i use pigtail for my mifi. I use copper wire for hub, it cant work?
Make simple hub by just peeling off the coax cable.
Dear Bro
I stay far away in Africa & can't talk to my parents in Home.Please make one for me.God would be kimd to you.I shall pay in advance.
Can you plis add list of material with specification in written formats.
What is the diameter of the alluminium square pipe
Very hard
So complicated...plz make a simple one using npn transistors capacitor and some resistance...
Eliments chota bada kyu hota plz ye bhi samjhaya kijye uska work plz reply.
on seeing lots of positive comments...i wish to buy this one ..can u please make this one send it me via courier ..iam ready to pay u
What is Element?aur ye kaha milega?
The reflector can be an old Satellital Dish?
Yes it may be.