Honda CRF 450 Oil Change | 2005 Honda CRF450-R | Partzilla.com
Вставка
- Опубліковано 22 сер 2024
- Buy the parts for your Honda CRF450R oil change here: bit.ly/CRF450-o...
Learn how to perform an oil change on a Honda CRF450R dirt bike. In this video, we’ll guide you step by step so that you can take care of this simple job at home. We’ll start by removing the engine cover on the left hand side, and then draining the oil. Garrett will show you an extra step to make sure you get all of the old oil out of the motor before you refill it.
Then, we’ll replace the drain bolt and show you how to replace the oil filter on your CRF450. The to access it, you’ll just need to remove two bolts, but be careful as you remove it: there’s a spring behind the filter that you’ll want to reuse. What we’re not reusing? The O-ring that seals the oil filter cover to the engine. We’ll replace that before we replace the oil filter and bolt the cover back in place. Then, we’ll refill the engine with fresh HP4 oil.
What is the oil capacity of a Honda CRF450? It’s .73 quarts.
How often should you change the oil on your CRF450? Every six races OR every 15 hours.
Read how to do this job step by step: www.partzilla....
Do you have an old dirt bike? Learn how to restore your old dirt bike here: www.partzilla....
VIDEO HIGHLIGHTS:
Draining the oil - 1:02
Remove and replace the oil filter - 2:31
Refilling the motor with oil - 5:28
Find more parts for the 2005 Honda CRF450R here:
www.partzilla....
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2005 Honda CRF450R. You may have similar steps on your machine. If you’re not sure whether these steps apply to your vehicle, leave a comment and we’ll get back to you.
RELATED CONTENT:
Cleaning the carburetor on a CRF450R:
• How to Clean Honda CRF...
Honda CRF450R clutch rebuild
• Honda CRF450R Clutch R...
I always put a little oil in the filter just to get it wet a little bit great vid
Can you guys make a valve adjustment video on this bike?
forgot to add if you put oil cap in upside-down the 3 holes won't line up. You could lead to some engine damage if the oil cap 3 holes are not lined up with the holes in the case. If you flip upside-down it will still mount but the 3 holes won't line up and won't properly filter oil. Also could lead to serious problems.
Thanks for pointing this out mate!
Which way is right? 3 holes towards the rear or front?
@@jbpooh line the holes up with cap.
Wrong information here the manual states nothing of this orientation in fact I think the cover is shaped in a way you can’t install it upside down.
Why didn’t you change the gear box oil at the same time
Why you always asking stupid questions? Maybe he didn’t want to so he could make another video get that $$$
@@fireboltazyou're weird
Just a heads up guys double check your oil passages on the oil filter cap. Just check it before you throw it back on ✌
@Xr Pals when you take off the cap double check the holes facing to the side make it back into the same holes inside the filter housing, should be 3. Or the oil isn't going to make it through the filter.
I just commented this and was going through comments to see if anyone else caught that he skipped that part. Very important 👏
How do you know which way?
Which way does it go back in? 3 holes towards the rear or front?
Big thx!
Idk but people online have talked about the bike having different oil chambers. Like wtf? One seperate for the transmission.
Are they wrong?
They are correct
@@TytonElders So then you have to buy two different oil? Or can you just buy a 10W40 and put it in both?
cranking over the engine like that is not a good idea....either is leaving that fill cap open for dirt to fall in accidently jmo
the manual says to do this it gets all the oil out, just hold in kill switch according to the manual. I do agree he should have washed it down and cleaned up areas a bit better.
What is the orientation of the cap? It has three passages and the case has four.
I was attempting 9ft pounds on my oil filter bolts as stated and one broke:(
Use a real measurement of liquid dude for gods sake
Hi, I see you are using honda pro hp, what is the best alternative to this oil? can t find this in my country.
I can put engine and. Clutch. One model oil 10w40 amsoil
So how many quarts of quarts of oil does a 2007 crf 450 r take ?
Hello I got a cr450 2006 and on the engine there's to oil caps do I have to do both side oil change or just one side
I have crf450r 2009. Engine need put oil 600mil
And clutch 670 mil it’s ok or not?
do you need to replace the washer and o ring every time?
no if its not ripped or nothing re use it , dont waste your moeny!
Bike wont start now? Idk what i did wrong
What about trans oil?
Thank you man!!
Same for 04 crf450r? I’m
Hey so do you change the oil on the left side of the bike more often than you change the oil on the left side? I’m confused as you only changed oil in one side of the bike. Also when changing oil on the right side do you use 10w-40 as well? Or special gear oil... please help me
Came here to double check what too torque the bolts too, don't use a synthetic or silicone based oil in transmission 80weight and for engine 10w40
@jon doe thankyou, I’ve heard so many people running 10w-40 through both sides of the case
@@coleanderson9298 google it read up and u see if u run engine oil in tranny it will fuc it up
@@coleanderson9298 yes you can run 10w-40 through both sides you just gotta make sure its the right kind. even says right in the manual. you can use Pro honda GN4 10w-40 for both sides and thats what my Honda dealer also recommended me to use
I use HP Honda in my cr250r, the red bottle for gear oil. Works best imo. Id definitely use it on the right side of my 450
Oil goes on both sides of a crf450, why?
Gearbox oil
I don't have a bike yet but I'm going to trail ride and replace my oil every 5 to 10 hours so I can get a better lifespan out of the ol Honda
Which side is motor oil and which side is transmission oil?
Right side is transmission, left is engine oil. Both of the drain plugs are located on the left side by the shifter.
What's the absolute best oil to use in my new 2020? Is Motul 300V really that good?
Honda recommends Honda oil. It's the never-ending question. Everyone has an opinion based on their personal experiences or which person they chose to listen to. Motul makes a great product. You will be fine regardless, just make sure it's the correct weight.
@@PartzillaParts im reading that Motul ETECH 100 is in the top 3 for dirtbikes and comes in 10W40 the motul offroad doesn't come in 10W40 it comes in 5W40 and 15W40 so I wouldn't try it in my bike and the Motul 300V is for street bikes.
What if u fill it too much, is that ok?
No, don't over-fill. It can cause problems. Just pull the drain plug partially out and allow a little out, and reinsert bolt.
What happens if i fill my oil just above the “h” for peace of mind , any benefits on long desert rides and should i run the standard 10w-40 im going on desert rides in the heat and want the best viscosity and enough oil so i dont starve it , can anyone help?
10W-40 is a good oil viscosity, in some bikes you can run 20W-50 for the extra viscosity
I ordered some brake shoes for a Honda TRX 350 last Monday on the site and forgot to get the tracking number to see where it is. How long does it usually take to send? It's been over a week. and is there anyway I can get a tracking number?
Check your email. There are a lot of variables with the information you provided. If you give us your order number, we can get more info.
This should be the same steps for a 2006 crf450 correct
Same process.
Is new bolt message
Necessary
WHERE'S JUAN TALLY ?
Where is the other guy!!!!
Working on a different video!
Thanks a lot, my filter cap bolt snapped before 9ft lbs🤬
That bolt should never snap under 9ft lbs. Perhaps it was over tightened previously and was stretched to limit.
Just dont torque it, Tights tight
👍👍👍💪💪
Hh