Deye Hybrid Inverter Max 16pcs in Paralleling Operation

Deye Hybrid Inverter Max 16pcs in Paralleling Operation

[@paweljandobruk1791]

Happy new year 2024 and thank You for diagram

[@uw5eaf]

Hello! I have 2x Deye 5k inverters (and I want them to work in parallel), a single-phase grid and one single-phase generator with start-input (NO relay) for solar inverters. And I have a couple of questions:
1. How should I connect generator to inverters? Should I connect it to only one of them or to both (GEN-port)? How should I connect G-V out of each inverter (should I connect them in parallel) to start the generator?
2. What is powered from generator when grid is de-energized? Only battery charger or backup load directly also? (I mean: how critical is frequency stability of generator and what about it's power?)
3. Am I right that I should configure "rated power" of generator as 1/2 of actual generator's rated power on each of 2 inverters?
Thank you!

[@mhpprofi]

Würde mich freuen wenn es solche Anleitungen auch in Deutsch geben könnte 👍 🇦🇹🇦🇹🇦🇹

[@jermainwhyte6894]

Do you have a 12kw split phase 120/220 volt USA version that they are selling on alibaba? I want to get that size for Jamaica. I want to make sure it’s 120/220 volt split phase and not 220/230 volt. Thank you. Also do you have an official site I can buy from?

[@FMG-MicroGas]

Can I parallel 16KW and 10KW hybrid inverter?

[@obusobusson736]

Why is all the three , three-phase hybrid inverters, connected in parallel marked as master in the video? Shouldn't it be master --> slave--> slave?

[@sanyapatm]

Can we do parallel 8kw deye hybrid with 5kw deye hybrid

[@Black74c]

Need help on connecting 2x 8kw Deye Inverter in parallel, after programming the inverter do I merge the Load output cables ? Example: Master Live cable to Slave Live cable...am overthinking

[@makunan]

Yes, the diagram are the same for home load/grid output wires (same connector) and backup load wires, you need merge in their specific busbar. One for homeload/grid Line, other for neutral and other for Ground and the same configuration for backup load.

[@DeyeInverter_official]

Hi,the load cables also need to be connected in parallel

[@user-gv3nw3dg6g]

hello , can i connect only two single phase inverter in parallel for a three phase load? and if yes how to do that.

[@houcineamaidi499]

no u can't becouse the load need three phase not two phase for example (motor electrical )

[@user-gv3nw3dg6g]

@@houcineamaidi499
thank you so much for your help

[@DeyeInverter_official]

Hi.No you can't, you must use three phase inverters

[@Kiril_Bulgaria]

Hello, could in the three phases parallel diagram CT to be replaced with smart meter?

[@makunan]

Yes, you can use Chint or Eastron 3 phase smart meter

[@Kiril_Bulgaria]

Thank you @@makunan

[@DeyeInverter_official]

Hi you can

[@munkhnasan5589]

Hello, How to connect the CAN wire to 5 inverters in parallel?

[@DeyeInverter_official]

This can't be done, the battery only communicates with the master