Man you are the only content creator that gets shit done, all your builds are superb in quality and you finish them so quickly! Hope this channel gets more recognition over time bc its one of the best
we roll it on at our Delta Airlines shop for slip resistance on the top of the belt loaders, mainly because our kits didnt come with the sprayer and Delta doesnt have it available
Great content, as always. I appreciate that the stuff you do is in line with what I either already try doing and struggle with, or what I hope to do in the future. In other words, real-world stuff. Keep it up!
I can’t wait to see when this channel blows up see it happen before to most guys i still follow… the builds will just keep getting better because all the talent and hard work is there just needs the viewers and money 💪🏼💪🏼
Adam , I have to give you and A+ for using time wisely you are on project no3 in just a few months just and amazing use of time ( but my uncle can do it faster) I dont even know what that means
The bed liner looks great and it really completes the back of the truck, that last coat you put on there which made it look even is a bit like a drop coat you do on basecoat🤔The SlamBox looks so much better now you have added the spaces the new owner should be over the moon with it so congrats to the winner👏👌 I would say my uncle could do it better and faster Adam but I don't have one so what can I say🤓😂John UK
I've been watching since you painted zosh's car maybe a bit before always fire content man even in a smaller space and you're still cranking out projects it's inspiring thank you keep up the great work
Honestly, I've been watching since you did the boosted boiz hatch. I've watched and enjoyed every video since. Your "no frills, no thrills" approach is refreshing and you do good work. Awesome content.
Loving the C-10 content! Looking forward to the Dumper project. Congrats to the Slam Box winner as well! Hoping another one of the bigger channels does another collaboration with you to get your channel the exposure you disserve(Congrats on the 100K milestone!). I only found you because of the Boosted Boiz; been subbed ever since. P.S. your content is right on par with the bigger Automotive UA-camrs IMO!
Very nice…. recently acquired an ‘87 SWB square. I want to drop the 2 side gas tanks and go with a blazer/suburb tank center frame in the rear, but i’d rather have the filler tube boxed up against the bedside. I’d have to raise the bed floor to do it (mine isn’t dropped low enough to C-notch), but in a way that avoids cutting the inner walls… i’d still have to trim the tubs, but….yeah.
you ever thought of getting the diamond grinder disks that are always on display at sema? cant remember the brand for the life of me. but you send them back when they are worn out and they rebuild them for life. just a thought.
If you buy a bottle of acetone and fill up the whole cup on each one with the rest of it being acetone it actually comes out shinny. I painted my whole truck with red and the inside of bed black and it hid all the imperfections and it came out shinny because I added acetone. And 3 years later it still looks good.
Your work is very spot on. I like the way you show 95 % how to do it and the way you figure how to get to the finish line. Happy Thanksgiving to you and your family God bless
I advocate hard for upol raptor liner. Iv used that stuff since 2011 at the shop I work for. We switched to SEM bed liner and iv had 2 or 3 chemical probs with it and it calls for more steps (leadt the sales guy claimed) and we are back with raptor liner. I know you know this but many font know that you can buy tintable. Also you can spray just regular black and wait 30-45 mins and spray single stage or base clear..also can wait till next day red scotchbrite pad and scuff and paint over. Also raptor liner isnt rubberized. Has hardner and can be samded. Anyways i love that shit.
EDIT: I TYPED RIGHT BEFORE YOU SAID IT. GREAT MINDS THINK ALOKE. Oh also when spraying it..after 2 coats..(or can do it the whole way through) but after 2..dust it all over triggering off and on that way you dont have any shiny spots and or dull spots..or if you get a thick couple blobs ...dust it all over and wont have those issues.
Man im no ford guy but that ford truck is sick..idk if its the fact that its on a newer CAR chasis thats a LINCOLN TOWN CAR. Or if its the paint/bags...all of it. Cant believe it was the give away 😢 truck. Lol
14:28 last video…. Nothing like that in this video…. OR WAS THERE 😉😉😉 My uncles wife’s brother’s friends cousin’s buddy does a better job… oh, that’s right it’s you !
Man you are the only content creator that gets shit done, all your builds are superb in quality and you finish them so quickly! Hope this channel gets more recognition over time bc its one of the best
True and Vtuned as well
Absolutely agree.
Bro, you always say something little in your videos to crack me up. Im sure you know what im talking about 🤣🤣🤦🏾♂️
I try lol
Custom tip I’ll buy you a dinner. Great builds and there always finished. No shakey steering wheel, they work and drive. No quirks given
Big congrats to the winner! Great progress on the C10 Adam. Looks fantastic. Have a good weekend, Dutch regards, Nico.
Not my uncle again... lol The bed liner came out great btw.
Very clean , wish my bed looked that good.i bought it used with the plastic one.Happy Turkey Day.
Congratulations !! Wasley H, Winning the SlamBox is amazing !!!! It is an awesome ride. It looks perfect when laid out now with the spacers.
l love your work young fella . l watch from qld Australia. l am 74 years old and I enjoy your videos.
Thanks for watching!
Congratulations on the winner of the slambox truck bed looking great 😁🤙🏼#bodesqaud #projectboxtruck
I forgot or maybe it was never mentioned is the Square body yours or a customers vehicle? That bed came out so perfect really nice job!
Just love the way you do it, not so many fancy part just creative ideas work.
Congrats to the winner such a cool truck!!
we roll it on at our Delta Airlines shop for slip resistance on the top of the belt loaders, mainly because our kits didnt come with the sprayer and Delta doesnt have it available
Great content, as always. I appreciate that the stuff you do is in line with what I either already try doing and struggle with, or what I hope to do in the future. In other words, real-world stuff. Keep it up!
I can’t wait to see when this channel blows up see it happen before to most guys i still follow… the builds will just keep getting better because all the talent and hard work is there just needs the viewers and money 💪🏼💪🏼
That bed turned out so fire dude. Congrats.
Good work!
Adam , I have to give you and A+ for using time wisely you are on project no3 in just a few months just and amazing use of time ( but my uncle can do it faster) I dont even know what that means
Love the content, always good stuff
Dude, Great job keep on keeping on!
I enjoy it all. One of my all time channel to watch,
The bed liner looks great and it really completes the back of the truck, that last coat you put on there which made it look even is a bit like a drop coat you do on basecoat🤔The SlamBox looks so much better now you have added the spaces the new owner should be over the moon with it so congrats to the winner👏👌
I would say my uncle could do it better and faster Adam but I don't have one so what can I say🤓😂John UK
I was wondering if there was 4 fills in that can also. Glad you did the math.
I've been watching since you painted zosh's car maybe a bit before always fire content man even in a smaller space and you're still cranking out projects it's inspiring thank you keep up the great work
Awesome builds!!
Loving the bed! NAILED IT 🤙
My uncle is a body man (you’re welcome) also subbed because I’m starting a swb c10 😅
Slambox looks better after spacer. Have to have the height when needed
Got the Slam Box dialed in for the winner. Bob's your uncle!
Great job man! Love watching your videos.
One of my favorite channels. Keep up the fantastically awesome amazing work.
Congratulations Wesley H for winning the slambox nice truck to rock around Texas in 👍
Adam ...Uncle does it better!!
Honestly, I've been watching since you did the boosted boiz hatch. I've watched and enjoyed every video since. Your "no frills, no thrills" approach is refreshing and you do good work. Awesome content.
I appreciate that!
Loving the C-10 content! Looking forward to the Dumper project. Congrats to the Slam Box winner as well! Hoping another one of the bigger channels does another collaboration with you to get your channel the exposure you disserve(Congrats on the 100K milestone!). I only found you because of the Boosted Boiz; been subbed ever since. P.S. your content is right on par with the bigger Automotive UA-camrs IMO!
As alway home run 😊
Killer build!
Love it. I dig your work.
Can't wait to see the dumper
Your uncle does a better job. 😂 great work as usual.
Very nice…. recently acquired an ‘87 SWB square. I want to drop the 2 side gas tanks and go with a blazer/suburb tank center frame in the rear, but i’d rather have the filler tube boxed up against the bedside. I’d have to raise the bed floor to do it (mine isn’t dropped low enough to C-notch), but in a way that avoids cutting the inner walls… i’d still have to trim the tubs, but….yeah.
Nice work 👍
Looks killer
The slam box is definitely gonna ride better with those spacers and my uncle is definitely not more careful about what he says 😂
Great job!
great work again
Thanks again!
Good work bro!
Clean clean looks good
Appreciate it
Bad ass brother
you ever thought of getting the diamond grinder disks that are always on display at sema? cant remember the brand for the life of me. but you send them back when they are worn out and they rebuild them for life. just a thought.
Such great work bro!!
Thank you so much 😀
If you buy a bottle of acetone and fill up the whole cup on each one with the rest of it being acetone it actually comes out shinny. I painted my whole truck with red and the inside of bed black and it hid all the imperfections and it came out shinny because I added acetone. And 3 years later it still looks good.
Mint brother 👌🏼
Keep up the good work bro... You are killing these jobs... Love it bro...
Your work is very spot on. I like the way you show 95 % how to do it and the way you figure how to get to the finish line. Happy Thanksgiving to you and your family God bless
Awesome 👍🏻😎
I have a 2016 f350 king ranch we bought new and I want to do the bed in the tintable
Would you consider making an "ultra-short" regular cab truck with one of these 5' baby beds?
I advocate hard for upol raptor liner. Iv used that stuff since 2011 at the shop I work for. We switched to SEM bed liner and iv had 2 or 3 chemical probs with it and it calls for more steps (leadt the sales guy claimed) and we are back with raptor liner. I know you know this but many font know that you can buy tintable. Also you can spray just regular black and wait 30-45 mins and spray single stage or base clear..also can wait till next day red scotchbrite pad and scuff and paint over. Also raptor liner isnt rubberized. Has hardner and can be samded. Anyways i love that shit.
Damn I was 15 and 56
Awesome work.
What wheel size combo are you running on that squarebody? Back spacing, etc.
Lets go brother
Awesome work!!
Keep it up bro!!
Thanks 🔥
Looks great
My onkel do not build better than you!
C10 looking really good Adam, nice like h.ll!
Slambox winner, grats! Good job Adam!
If I’m in a budget, what harbor freight spray gun would you recommend to do a decent job on a budget for beginners?
ua-cam.com/video/X5S7gqgxlEE/v-deo.html
👍
EDIT: I TYPED RIGHT BEFORE YOU SAID IT. GREAT MINDS THINK ALOKE.
Oh also when spraying it..after 2 coats..(or can do it the whole way through) but after 2..dust it all over triggering off and on that way you dont have any shiny spots and or dull spots..or if you get a thick couple blobs ...dust it all over and wont have those issues.
Yup still a bad dude!
Man im no ford guy but that ford truck is sick..idk if its the fact that its on a newer CAR chasis thats a LINCOLN TOWN CAR. Or if its the paint/bags...all of it. Cant believe it was the give away 😢 truck. Lol
❤❤❤nice
What color bed liner did you use?
purple
My uncle again dude 😢
Who won the truck? I haven’t heard anything? Did I miss it?
My uncle definitely can’t do it better
Well my Uncles imaginary friend can out weld your Uncles imaginary friend.
14:28 last video…. Nothing like that in this video…. OR WAS THERE 😉😉😉
My uncles wife’s brother’s friends cousin’s buddy does a better job… oh, that’s right it’s you !
You should buy a shaker
My uncle needs that extra 1 1/2 inches, asking for my Auntie!
Haha🤣🤣🤣 Also just noticed ive been unsubed so just resubed just then.
My uncle drinks more beer and gets ish done faster. 😂. But seriously, great job in the Bodega brotha
My X roommate brothers first Girlfriends dad did a way better job on his 😂 love the builds man 👏👌👍👊
So close!!! Lol😂
damg son
My uncle
👊👊👊👊👊👊
🔥🔥🔥🔥🔥🤙🏻🤙🏻
Hey man I have a 1978 f150 with a two white over red. Hit me up
Why just a tip when you could have the whole thing
If I was wasting an inch and a half, I'd have nothing left.
My third uncles cousins sisters on my brothers side does a better job than that and he's blindfolded.
My uncle does a better job than you do 😂😂😂😂😂😂 not really you amazing brother. Keep up the good work
Your uncle still does a better job 😂
Slambox is still slammed.
My uncle does a better job than you do........ not really he kinda sucks at life lol.. keep it up love the videos.
Hands down my wife uncles mistresses husband said he can do a better job😂😂😂
My uncle could do it better,great job
Brother
Goodbye diarrhea 😂
my uncle could still do a better job of this.
Came to the comments to ask what the subliminal messaging about adding a tip was all about? Can people send you money or a tip Adam?
dude, my uncle does a way better job at simple math than you!