This little car is a single cam but it really is a ten out of 10. Absolutely a beautiful rod. Wow, so eye-catching! Nice build fellas. Thanks for sharing it with us. Bless you brothers!!
Jesse has an fast beautiful build, top notch setup and shot out to Jamie and Brent for the tuning and content. Thank you Jesse for your support with the YCU pickup bracket setup, your setup looks awesome.
I remember seeing some old videos of this car in its earlier stages.. so cool to see and track the build progression! thanks for bein such a legend Brent!!
Fantastic video as always! I get so excited when there's a new video from PFI speed. I've always wondered how you guys decide who's going to be sitting in the driver seat, you or Jamie?
Mine was a full 100% street car running 10s in 2008. It was full weight and under 400hp. My build was all about efficiency and longevity. Fuck them transmissions though lol... until i went to a CG trans.
Right before the end the pull there's a little water coming out of the intercooler (11:51) wonder if the intercooler has a pin hole and could potentially be a boost leak ? 😅
Would love to see an f series build. They're pretty cool little single overhead cam engines and they have cast-iron sleeves. And let's not even forget that you can put an h series head on an f series block and make a really cool Frankenstein motor. The old-school Honda guys will know what I'm talking about. Anyways so cool seeing so much being wrung out of a d series. Cheers from Northern Kentucky 🤘
I miss my single cam d series only made 15 lbs with injectors and fuel pump on stock everything what a ripper that was 20 years ago with the cast greddy turbo kit amazing how far the world has came
@@rocknrye9273 I think I made this comment prior to seeing the final dyno numbers. Either way, making that kind of power on a 1.6 SINGLE CAM is impressive. Not many people can do that or will do that with a motor like this.
@@jonathansalgado9194 they definitely do take a lot of time, knowledge, and of course money to make they stay together when pushing them over 500hp. A few years ago I built a single cam, made 583whp, and had the head lift, I then decided to do more things to the motor to strengthen it, but then realized I was just throwing money away and could build something a lot better for the same cost
just an outside the box idea but you rarely see a built F23A. I've always wanted to build one myself since owning my 95 accord ex 5-speed, such a fun DD. Love the content!
Brent do me a favor and go buy one of those plastic dispensers of foam ear plugs that mounts to the wall. At least give me the illusion that people know what tinnitus is and actually value their ability to hear. Cmon. (I'm glad you're canned up at least)
How much can a d16 turn? I want to build something with d16 in the long term pfi greetings from Panama a 16 head well that with a valve camshaft and sprint retainers how much the d16 turbo can rotate
With the single cams, what do people do for bigger head studs? I’ve heard of people drilling and tapping for b series ones but does that make that much more of a difference?
I was on this morning at 5:48 am central time and the time this was posted by Brent was 2 hrrs before hand. That puts this vid. posted on line at 2:48 or 3:48 am. Damn Brent! Get some sleep!
It's wild to see a single cam put down those kind of numbers. I had an 02 with 1.7 single cam and it was a gigantic POS I hated that car But my 97 with the 1.6 single cam would troll Mustangs and Camaros to over 140 mph! 😁
The reason Why u test on the dyno is to find these issues. Better that this happend on the dyno then it happen at 160 on the track and that thing lose control and hit a wall. Sick single cam tho
This is how PFI builds should look. If they built this car it would be covered in greasie hand prints, dirt and grime all over it. Lol. Shane's rat stache hairs stuck on the interior. Take some pride....even clean the dyno screen display, has like sticky pop splattered all over it. Clean up and finish what was started as far as cleaning up the shop. Make it a place everyone wants to take their cars too.
Just when you think you can get some sleep, PFI out here keeping us awake with this fire content 🔥
That thing is a clean ass car for a drag car. Nice work Jessie she's a beauty!
So crazy to see this car in its different stages. And the amount of power this thing makes is just incredible. Gotta love a badass D series
I've never even thought about owning a little 4-banger, but this car is gorgeous. Cleanest thing I've ever seen. Beautiful work!
Honestly. They're really surprising. Back in the day I hated them and rotarys. Owned v8s and v6s and v10s. And now own an evo and an rx7😂
This little car is a single cam but it really is a ten out of 10. Absolutely a beautiful rod. Wow, so eye-catching! Nice build fellas. Thanks for sharing it with us. Bless you brothers!!
Jesse has an fast beautiful build, top notch setup and shot out to Jamie and Brent for the tuning and content. Thank you Jesse for your support with the YCU pickup bracket setup, your setup looks awesome.
Jesse is one of the reasons I love my single jingle. #CAMSOLO
I just love ❤️ the old single cam engines !!! 😜👍🇦🇺
Cleetus, boostedbois, pfi speed, sick summer live fed, and Steve Morris videos. Solid content this week!
Was just watching the old content of this build and this pops up, how good! Hopefully you can get back on the dyno asap, tuned in from New Zealand 💙
That's 1 Bad Single Cam, The sound is on point 😎👽👍🏻 🚴🏼💥☁☁☁
I remember seeing some old videos of this car in its earlier stages.. so cool to see and track the build progression! thanks for bein such a legend Brent!!
Absolutely beautiful coupe 😮
These single cam videos have me super excited to get back home (South Africa) and start my d16 build waiting in my garage!!!
Wake n bake with PFI speed. "Today going be a good day" yes and I sang it. J Swap Jason.
Damn that car is clean. I love the wheel package and offset chosen. Seems like a super solid and well thought out build. Very nice 👌
Fantastic video as always! I get so excited when there's a new video from PFI speed. I've always wondered how you guys decide who's going to be sitting in the driver seat, you or Jamie?
Not the way you want a friend to smoke out the shop... Beautiful build, whole lotta love in that car!
My buddy Jessie car hell ya love to see that bad boy it's sick to have watch it gone form a street car to this hot rod
Man that is a beautiful little civic very well done and its a ripper
will always have a soft spot for single jingles.
Makes me miss my old single cam. First in the states to run 127mph in the quarter. Back in 2002
Mine was a full 100% street car running 10s in 2008. It was full weight and under 400hp. My build was all about efficiency and longevity. Fuck them transmissions though lol... until i went to a CG trans.
It looks really good 🔥🔥🔥 the only thing i would change is te gas tank it look close to the exhaust 🔥
Absolutely love this channel watching from aus! Let's goo boys!!! 🙌
Awesome car. Love the stance, rims and tire setup, plus the overall look. You'll get it fixed.
Keep up the amazing work everyone at America's favorite shop PFI.
Nice Civic ! Wow
Right before the end the pull there's a little water coming out of the intercooler (11:51) wonder if the intercooler has a pin hole and could potentially be a boost leak ? 😅
Would love to see an f series build. They're pretty cool little single overhead cam engines and they have cast-iron sleeves. And let's not even forget that you can put an h series head on an f series block and make a really cool Frankenstein motor. The old-school Honda guys will know what I'm talking about. Anyways so cool seeing so much being wrung out of a d series. Cheers from Northern Kentucky 🤘
I've got a boosted F series. It's a daily driver near 300k miles. Nearly 20k on turbo setup
ShoNuff is F20
gotta love those single jingles!
😮 Damn..... I thought you were exaggerating about it being clean.... but that is a very mint Civic.
Awesome single cam build! Bummer his head gasket blew!
I miss my single cam d series only made 15 lbs with injectors and fuel pump on stock everything what a ripper that was 20 years ago with the cast greddy turbo kit amazing how far the world has came
Beautiful car! Sounds amazing too!
Nearly 600hp on a single cam is very impressive
@@GuiPutzsingle cam Honda motors are known to lift heads… that’s why I would stay away for a high ho build.
Nearly? Lol it's over 600hp 😅
@@rocknrye9273 I think I made this comment prior to seeing the final dyno numbers. Either way, making that kind of power on a 1.6 SINGLE CAM is impressive. Not many people can do that or will do that with a motor like this.
@Gaspar's Performance It sounds sooooo ridiculously good too!
@@jonathansalgado9194 they definitely do take a lot of time, knowledge, and of course money to make they stay together when pushing them over 500hp. A few years ago I built a single cam, made 583whp, and had the head lift, I then decided to do more things to the motor to strengthen it, but then realized I was just throwing money away and could build something a lot better for the same cost
Yeeehaa single jingle time ❤❤
I love seeing all the DP race parts and stickers stickers on the cars out there 💪🏼💪🏼
Now thats a work of art !
Sweet whip!
Holy Single JINGGLE . THATS GANGSTER ..and car looks 👌 , blk / gtx/ 1.o6.=my turbo for a 4.0...., thinking it may be small.
Keep up the great work guys and gals 💪💯💯💯💯💪 LET'S GO
just an outside the box idea but you rarely see a built F23A. I've always wanted to build one myself since owning my 95 accord ex 5-speed, such a fun DD. Love the content!
Long live single cam!!
That's exactly what happened on my single cam with Benson sleeves. Twice. Dual cam for me now.
Nothing better than waking up to some single cam with your coffee ☕
Good lord that’s a lot of power on a single cam. I can hear the crank journals screaming from here lol
very impressive.
Such a beautiful awesome car!
The 🐐 of boost d💯
I do not miss blowing head gaskets on single cams… built a z6 back in the day… went through 3 or 4. Car had arp studs.. was well tuned… not fun
Brent do me a favor and go buy one of those plastic dispensers of foam ear plugs that mounts to the wall. At least give me the illusion that people know what tinnitus is and actually value their ability to hear. Cmon. (I'm glad you're canned up at least)
i own a single cam d16z6, this is goals
Hell yeah can’t wait to see this let’s go love you guys n the content
Clean single cam
That car looks beautiful ! Very tastefully modded. Pity the head lifted.
I'm inspired now I want my d15 engine looks like this
i have a single cam built and no where near this nice build!
How much can a d16 turn? I want to build something with d16 in the long term pfi greetings from Panama a 16 head well that with a valve camshaft and sprint retainers how much the d16 turbo can rotate
Unbelievable car
Love the tune vids, and checking out the setups!
What does Jamie mean when he says "I'm 5% away from the fuel?" away from 100% duty?
5% correction on air fuel ratio, it will pull 5% if running rich or add for lean
I would make sure that the air filter on the single cam isn't the type where the middle plastic piece melts and falls into the turbo.
you look like ozzy in the thumbnail and i love it
❤ LOVE THIS ❤️ 😅
Whats the box in the passenger floor ?
Single jingle are life..
What's the rim and tire combo for the front end there kind of interested
Could someone please enlighten me, what are those hoses connected to the head cover? Thank you
What transmission is he running to handle that power? The stock d trannys dont handle power that well
What a machine 💪
With the single cams, what do people do for bigger head studs? I’ve heard of people drilling and tapping for b series ones but does that make that much more of a difference?
Just get it tapped to fit L19 studs from arp only if you're serious about the power
Is that block a sleeved 77mm
He got enuf NOS in there to blow him self up 😮
I was on this morning at 5:48 am central time and the time this was posted by Brent was 2 hrrs before hand. That puts this vid. posted on line at 2:48 or 3:48 am. Damn Brent! Get some sleep!
@7:11 front right wheel was moving around a bit compared to the right!, shame the head lifted on the single cam that thing is sweet.
Can anyone please tell me what dizzy/ignition setup that is? Can’t get oem dizzy anymore and I want to find the best alternative..
why have a air-filter on the turbo ???!! wouldnt that be restrictive??
What are the benefits of a single cam over dual cams Brent?
You just Gato love those Gato intakes. Lol
Fancy! 👍👑
It's wild to see a single cam put down those kind of numbers.
I had an 02 with 1.7 single cam and it was a gigantic POS
I hated that car
But my 97 with the 1.6 single cam would troll Mustangs and Camaros to over 140 mph! 😁
Well the problem as you can see with these sohc motors is the heads will pretty much always lift... so it'll get a few good runs then it'll pop.
@@ReaperActual518 what’s the solution to not have head lift?
What block and head is the I’m guessing all Z6
Was this a D16y8 or D16z6?
Let’s go bro 😎
The reason Why u test on the dyno is to find these issues. Better that this happend on the dyno then it happen at 160 on the track and that thing lose control and hit a wall. Sick single cam tho
This is how PFI builds should look. If they built this car it would be covered in greasie hand prints, dirt and grime all over it. Lol. Shane's rat stache hairs stuck on the interior. Take some pride....even clean the dyno screen display, has like sticky pop splattered all over it. Clean up and finish what was started as far as cleaning up the shop. Make it a place everyone wants to take their cars too.
She's a beaut Clark!
all that work for a single Cam Honda engine?
Nice timing
Love your content Brent there is just not enough hours in a day sometimes lol.
Anyone know why they have been using fueltech alot instead of hondata?
One cam jam.
Mab, jump back to 03' tell some kids you're turning 500+ whp on a single jingle.
We've come so far.
Nice jewel❤
On my way to work n just in time for PFI time.
funny how FWD is becoming rare now lol
Better now than at the track.
Close the deck on that think and put the L19 arp head studs
Shit happens. Time to get some better headbolts.
Holy shit 618 on 25 psi??? That's insane on the single cam. What size turbo and how much timing guys? EDIT -- gt3582 wow. huge power
Single jingle has rubbed off here big time when i see a boat nahhh its only a single jingle lol (meaning only one motor lol) it grows on ya