Full Sound System Install Upgrade | Classic Chevy Stereo Install
Вставка
- Опубліковано 10 лют 2017
- DIY BRI Shows You How! to upgrade the sound system in a classic 1972 Chevy Cheyenne truck by modifying and installing door speakers, install tweeters, upgrading the stereo with bluetooth, upgrading the wiring and installing an amplifier. Learn how to cut holes in the doors for the speakers run the wires and install an entire car audio system by yourself. Get real tips to get professional results.
Links to the audio equipment used in this video
RE AUDIO AMP amzn.to/2kdPsAp
SONY CAR STEREO amzn.to/2kSSeIx (updated model)
Diamond Audio 6-1/2" Speakers amzn.to/2kSW6cl
22-18 Gauge Crimp Caps White amzn.to/2kdSzbi
Recommended Amp Kit amzn.to/2kSTHhN
Recommended Speaker Wire amzn.to/2kgfmhR
Recommended Tools for car audio install:
Drill Set amzn.to/2lueN9s
Tin Snips amzn.to/2lBbMko
Automatic Wire Stripper amzn.to/2luyk9V
Crimping and Cutting amzn.to/2kD2vd7
Head Unit Removal Keys amzn.to/2kdTtEI
Test Light amzn.to/2lBsRdV
Like My Facebook Page!!! / doityourself4life
My Website
doityourselfbri.com/
Subscribe To My Channel!
/ doityourselfbri - Авто та транспорт
Cutting holes in the doors is a perfect upgrade to a detail that GM overlooked.
Life is too short to cruise around with crappy tunes.
Just do a good job and never think about it again.
Great video and that is one sweet K10 CHEYENNE SHORT BED!
You did that truck a favor.
Well done :-)
That’s what kick panels are for 🤦🏻♂️
Bad enough to cut holes is a C10, but to cut holes in the doors of a short bed K10… nothing short of savage.
Thanks Brian, Getting ready to restore a 1973 Ford f-250 4x4, This and other videos will help out with that ! Shane from Ohio
+Shane Rowland Thanks! I hope to restore one like this some day too.
Awesome install information. Just what I needed.
Nice!! 👍 I'm glad it helped lol Dad! Now it's time to get yours done 🙂
Thank you Brian great video, but where did you mount the ground wire?
Thanks Brian, very nice!
OMG are u out of freaking mind hacking up those beautiful doors!!!! Why not do kick panel speakers? Wow wow wow!
Could you install an aftermarket radio in a 55-59 Chevy truck.
Need that stereo install video!!!
Have you uploaded the step-by-step stereo install you referenced in this video?
Did the owner upgrade the Alternator? In your opinion would a 110 amp alternator be sufficient?
Did you have to upgrade the alternator
That's a good looking truck
+Hard Knocks Forge Yeah it's pretty sweet, it's a buddy of mine's truck.
Is the amp ground going to the frame of the vehicle?
Great video! Did you get around to uploading the step-by-step stereo install you referenced in this video?
Split loom to protect wire??
I have a chevy c10 (1981) and I need to install speakers, a radio, and AC
I have a 2003 Old car that it's becoming a "Classic", and I would never ever ever ever ever cut holes in the metal, as it can create RUST in the future as they are where water can run sometimes... and in the event that I do, I would spray at least some clear coat around the cut zone... and I would never use a screw into the floor for the same reason.. I dunno where are you doing this, but if you do have some cold snowy winters the salt used to melt it will for sure cause corrosion... oh well...
Also I would solder those cable end tips before insulated them with heat shrink plastic material..., well that's what I would do... :D
How much did it cost
rear seat passengers feet on amp sightaway
That amp was discontinued due to fire hazard.. so, yea.. get the right amp.
I have a ‘72 Chevy c10 pickup and I’m wanting to keep the classic radio but I just want a way to be able to run an aux chord to my phone. How would I do that?
hunter quinton they have a cassette aux cord that would work or if you wanted to do an aftermarket you could install it into the glove box
A nice example of a well kept truck. I cringed a little when you said you planned to cut holes in the doors. I needed a kleenex when you actually did it.
I know what you mean. however that is what the owner of the truck wanted to do!
0Myles0 aren’t new doors not that expensive tho?
Do It Yourself Bri Yes but u as the “professional” should’ve told him about kick panel speakers!
RTD i7
i cringed over the connectors. should have soldered all the connections and heat shrink insulated all the solder points
I think you have the truck year wrong..
+6FeetUnder You are right it's a 1972...Not 77
@@doityourselfbri You might have your friend double check his trucks VIN to verify the year of his truck. The doors he has are not 1972 doors. They're 1971 or earlier as the 1972 doors have a dimple and screw on the inside top just below the wind wing vertical post and lock. Nice install by the way.
@@Fishwacker59 nope, its a 72. The arm rest alone tells you it is a 72. all other years it was the stand alone beefy arm rest
Congratulations you ruined a good set of doors
Destroyed that beautiful rare truck
It's a fucking truck.
It'll be there long after he's gone. You can buy trucks all day long but you can't buy loved ones once they're gone.
@@kevindavis4709 you can not buy a K10 trust me not many can good luck finding one.
@@Aaron-hd8ql yup they're rare.
This is a video of what not to do. Do not cut holes in these rare beautiful trucks and never edit film/videos like this horribly either