Restoration BMX - Complete Process
Вставка
- Опубліковано 15 тра 2024
- In today's video I will try and restore an old Bmx bike.The restoration process took me about 3 weeks in total.I really hope you enjoy it and let me know i the comment section what to restore next?
More Restorations:
GoKart Restoration - • Restoration Abandoned ...
HONDA CG125 Restoration - • Restoration Abandoned ...
BMX Restoration - • Restoration BMX Bike -...
PocketBike Restoration - • Restoration Pocket Bik...
YAMAHA Restoration - • Restoration Abandoned ...
Pizza Oven Restoration - • The Ultimate Pizza Ove...
Chapters:
0:00 intro
0:57 bike disassembly
9:05 metal work
13:55 sandblasting
17:10 spray painting
20:00 metal work
27:50 fixing wheels
28:55 bike assembly
33:25 outro
#Restoration #BMX #Bike - Розваги
Took so long to find a simple video of someone disassembling a bike I appreciate you
Same here. I’m currently restoring a Bike from 2018 and needed help with some of the parts
Nsksskjwiwk😂😂🎉🎉🎉🎉❤
@Da❤пкуццый1ц4е53 й41yZJ 😢😢😮7😅😊😊😊😊😅
@@DayZJк 2:48 2:48 😊bc WA AWERYS3ZA a du22 UC t7u ex f245 iXfurxXfh see
El si ga uspeo rastaviti
For being severely rusted all the hardware came apart with little to no effort. You must be the Hulk!!
Probably rusted on perpose for the video
😮
If you give the tubes a tiny bit of air, it makes inserting into the tire much easier and you don't have to worry about pinching it when putting the other bead of the tire onto the rim.
Bmx or mountain bike tyres are easy to put on by hand never once pinched one in 20 years
@@joski9030 his point still stands. If the tube isn't filled with a bit of air, the tube can get under the tire bead and pinch it.
Yep always a little air. I usually keep the tube inside the tyre and just line it up with the valve, pop it through and quickly roll the tyre over the other side of the rim. No need for any tyre levers lol. It's not a car tyre😅should be easy
If you read the installation instructions that are printed on the box of the new tube it says to do just that. This is one of those just do it kind of tasks I guess.
Next time name the items you're using to clean up the bike parts 😅
I'm amazed that cleaning the wheel straighten it out! 🤣😂🤣
More synthesized rust! I see a pattern on your videos! 🤣
I have a question , what do you pour over the bike to make it look so naturally rusty ? I have a new bike pelali something to unscrew)))
White vinegar on the bare metal
Vaga no vovô
I have a question, what other channels content do you hate on with redundant questions that you could literally type on Google instead for instant answers?
@@roberttucker115😂
@@roberttucker115 ha bhie
I know very little about paint stripper, etc., and wish you’d list what liquids you’re using…I don’t care about brands, just what it is. Thanks much and great job!
Aircraft remover
You can use any paint stripper stripper ,I've done it many times
Wow! If I hadn't seen this, there's no way I would have believed it was the same bike.
Looks alot better than before you put it under water to rust.😆
Thought the same.
A bmx which could be rusted that bad wont have a frame like this.
😊😊
Stunning restoration loved the care attention you took with all the aringnal parts it was enjoyable watching you have great talent and anyone would love to own that bike love the colours also
Bro I really want that bike
its original not aringnal
This bike would be a 5.5/10 because some of the parts don’t belong on there and the one piece crank 😂
Great job, reminds me when I was a kid.... We didn't have any money & I would take 3 bikes the (rich kids threw in the garage) to make 1.
We still do that! We take donated bikes, gix them, and get them out to kids who want a bike. Save some parts for builds, but still like to Frankenstien.
DANG! Looks like this sucker got pulled up while magnet fishing. This is going to be an interesting resto FORSURE!
what did you pour on bike to remove rust and paint?
Those bearing went from old and rusty to new out of the box 😂 “come on man” just keep things legit…
Good restore❤
If the bike looked that bad, you have to wonder what the rider looked like!!!😱
Awesome job!!! ❤️❤️❤️👍🏻👍🏻👍🏻
Hey, can you please share what chemicals you used to strip paint?
18:14 had me so riled up, 18:34 made me happy again
Beautiful restoration
Awesome work regardless👍👍👍 and an Original Raleigh CHOPPER is one that needs to be done🙏🙏🙏🙏🙏
That’s amazing. I have no words.
That chain was quite flexible considering how rusty it was. Also why did you grind the link pin, why not just use a chain link removal tool?
That's because the bike has clearly been aged to make the transformation seem more dramatic. He probably half stripped the paint off and covered in acid a day before the restoration. Seat tube never would have slid out that easily and the lack of pitting on the frame is a bit suspect.
@@HitsHangerMusic Yup
And put that chain again but with no any chain lock) this man is probably not into bicycles
Hdggddgdgdcdgdcdhdctdcdggddggedggdgddvdhdgdgdgdgdgdgdgdgdgggdyfgdhdgdgdhfgdhdghdgdyffgfgfgyffdydfhfyfhfgh
You have to, those tools only work on bigger chains with a master link, this didn’t have a masterlink
Amei essa cor que vc colocou... Qual seria o nome?
Hi, what product did use to remover rust from the bike frame?
Oppression
im waiting for someone to weld a bmx drivetrain to the front of an adult bigwheel, and put road bike wheels on the back. i think end result would be fast
first off = beautiful restoration - i do not think i would want the brake handle so slick, i might have given them a cross groove - seat post resto - genius - i would have been sliding that rod up and down getting a sore wrist and it looks kinda weird.
💙
I love the fact that he bought new wheels, all suddenly spokes weren’t missing and the front wheel wasn’t bent
and somehow the brake cords, grips, and brake levers seemed brand new
@@nickthetrixter5356of course the grips were brand new. He cut the old ones off. And he literally showed himself polishing the old brake lever.
To be fair, the hubs looked like the originals. That front rim was way too far gone. If it were me I'd have replaced the chain and the bearings too - no point in using them, but he did, I guess to prove a point. The bike started off with two brake levers, but no front caliper, so he junked the front brake too. I probably would have gone with no brakes - most street BMX'ers don't run brakes.
If you ever choose to do a bike restoration again, I would advise to replace parts instead of refurbished because parts always have a lifespan on how many rough landings they can take before they break and you never know how much stress those metal parts have been put under prior to you getting a hold of it
That would include the frame and forks in that advice to though, probably the most stressed parts of them all. Which basically means don't refurbish any of it if you are that safety conscious. Sometimes restoring something doesn't mean it has to last, it's all about the process of what can be achieved.
They look pretty good to me
I don't think anyone is gonna be hucking this one around with the 3/8ths rear axle and 1 piece crank anyway
Bro didnt realise their is an ajustable chain link used to remove losen and tighten the chain
Przepiękne jest to wykonane odrestłrowane BMX super jest to rower pozdrawiam twórcę tego filmiku 👍👍👍👍
🎉❤😢❤❤❤❤❤❤❤😂😂😂😂🎉🎉🎉😢😢😢😢😮😮😅😊😊😊😊😊😊😊😊😊😊
Wow awesome 👍👍👍👍👍👍
This was an awesome video but the way you did the tube in the tire killed me
Knowing my luck, I would probably forget how to reassemble the bike or just loose one of the bolts
Two thumbs way Up on the restoration !!!!!!!!!!!!!!!
Your videos are very very beautiful I hope you continue🎉❤❤😊
Nice work!
Cool gemacht. Ich habe es vor 2 Jahren an einem alten Haro Psycho versucht bei dem im Stahlrahmen die nachträglich verwendete Alu-Sattelstange festgegangen war. Das Alu der Sattelstange ist Kontakt-korrodiert und aufgeblüht und hatte tatsächlich sogar das Rahmen-Sattelrohr fühlbar um 1-2mm geweitet. Man konnte fühlen das die Sattelstange fast 3/4 im Rahmen steckte. Leider Kapital gewesen so flog er dann doch auf in den Altmetall Container. Wir hatten überlegt es mit Gallium zu versuchen aber das hätte das Budget gesprengt.
I'm guessing the first liquid you used was some kind of acid? That is some amazing stuff. I would like to buy some of that. The second must be paint thinner.
Most guys use citric acid, to cut through the rust…but it’s much easier to submerge all the parts in a tub. The second liquid is paint stripper…I use this quite a lot for removing paint. There is a big caution when using paint strippers, it’s caustic and needs to be neutralized with a 1:1 acetone and lacquer thinner mix, this will clean the metal surface…just like metal prep. Then your ready for primer and paint.
The restoration of the frame is good, but the replacement of the consumable material must be replaced, the replacement must be mandatory for the chain and all other parts, otherwise it led only for the exhibition,
Thanks, im looking at doing this myself, recently whipped up a $10 marketplace special on a GT bmx
We are redoing the same bike now…Mongoose. U gave me hope on some of the items
tá igual a minha só muda que a minha não tem freio e a corrente é preta parabéns cara minha bmx é de manobra a tua é de passeio se tu mudar essa coroa e o pedivela e tirar o freio fica bacana
27:45 *a wild new set of rims appeared*
muito satisfatório esse vídeo! parabéns deu vida a bmx
Esperma.
great restoration..whats the mixture you added with the headset guard and bottom bracket bearing guard that turns that to black??🎉🎉
Geanta de pe față este VARZĂ fratele meu trebuie să îi pui alta 😅 FANTASTIC PERFECTYQNESS RESPECT 😍👍👍👍❤️😮🤟💪💪💯💯
The new wheels were a nice touch.
20:54 imagine brushing your teeth with that! Sparkly clean every day!
Compre agora mesmo a nossa linha pantene!
Yo tengo una duda, no sale mas caro arreglarla que comprar una nueva ?
Gracias por compartir 👍 maximo respeto y mucha vibra positiva 😎
oye es ta en ingles
Utilizaste Tiner para quitar lo Oxidado o que Químico usaste?
...lookin' good, great resto, keep safe...
you are fully equipped, you can get a broken bicycle but the damage is not too bad, I bought a bicycle for only IDR 100,000 equivalent to 6.5 dollars. a good used bike is only IDR 400,000 equivalent to 26 dollars. The bike I bought had to be replaced because the fork was bent, the frame had holes due to chain friction, the wheels had to be replaced because the freewheel was so hard that if forced it would damage the wheels, the spokes broke a lot, if repaired the cost exceeds the price of new wheels. so I had to buy new wheels, the old bottom bracket shook and bent the frame until it eroded the axle iron, replaced it with a box bottom bracket, there were no two inner tubes for the outer tires, the crank and chainring were broken and bent, the saddle was broken rickety. I invested all of that around IDR 1000,000.00 equivalent to 65 dollars. while the former is only IDR 400,000
Красиво выглядят❤❤
Nice job!
What its called the liquids you applied to remove the rust and the other liquid to remove left over paint ?
relaxing, entertaining and amazing just perfect
I loved the video very cool to watch ❤
23:52 thats where my sushi container went!
Felicidades.un excelente trabajo.
Poor thing… glad it’s fixed!!!!
It's odd seeing more modem things restored on your channel than some of the others i follow. Its pretty cool to see how much even a few dozen years can degrade something!
They are degraded on purpose, that’s why they clean up so well and easily!
@@SKOMPAS Ah, ye of little science...
@@erincrary3625 você ainda acredita neles ?
@@erincrary3625 salt water and vinegar will rust things like crazy
And things don’t rust uniformly!
This deserves more views. amazing video
That is an awesome thing to be doing! But WHERE IS THE GREASE AT?!?!?!?!
I miss my bmx sana all 👌👍❤️🇵🇭
Great video! Awesome project! i love your attention to the details. :)
wow just amazing subbed
Unbelievable!! Bikes are usually a walk in a park for restoring.
Definitely brought er back to life bud.
Should've sand blasted that frame but if you happy im happy for ya
Amazing job!
Супер работа. 👍👍👍👍👍
Damn, Zeke.
Hola.He hecho muchas restauraciones y en un principio limpiaba las cadenas,sin embargo al poco tiempo se cortaban,por lo que decidí poner cadenas nuevas en una restauración.Tambien me llamó la atención la facilidad con la que se extrajo el tubo del asiento ya que por lo general y con esa cantidad de óxido se requiere la aplicación de calor para soltarlo. Saludos desde Chile.
Hay varias cosas que no se sienten bien en esta "restauración" con esa cantidad de óxido lo esperable es que la cadena este totalmente inmóvil pero esa se balancea así mismo cuando saca los frenos no ni rastro de óxido en los tornillos
@@Water.897I agree it all looked suspicious.
Tu comentario es correcto
estes vídeos de restauração na maioria são falsos, apenas continuam fazendo pois ainda tem muita gente que assiste. Eles precisam manter a produção de vídeos, e como não dá pra restaurar várias coisas em tão pouco tempo, acabam falsificando.
muy buen trabajo de restauracion ,pero las ruedas eran las mismas?
👍👍👍👍👍🤩
good job
It belongs in that lake.
Crazy🔥👌❤
parabéns cara, excelente trabalho!
Sin palabras excelente vídeo un saludo muy especial desde Colombia
Excelente, yo tuve en mi adolescencia una Mongoose pro de salto tambien y era lo máximo y las BMX también eran excelentes 👍👍, Saludos desde México 🇲🇽👍
finally someone who doesnt use 20kg of paint stripper for a 20gram metal part^^
Good job👊👍
31:35-31:50
🤤🤤🤤
AMAZING VIDEO
love that u heat treated it lol alot of restoration videos dont
Do you know what it is? Its like the perfect bmx bike to me
ficou linda
It's a newer style bike tho. It's like they must have bought it and threw it in a field. Great video tho. Satisfying af
That chair looks really good
"Restoring" bearings and chain? My brother in Christ those are consumable items
🎉😂😂😂 Too Funny
Ahahhahaa
It was like servicing
😂
😂😂
What A Transformation & How Many Hours Did That Take ?? Think Im Going Into Restoration Aswell... Looks Amazing...
Awesome build! Just be careful with those painted rims! Those v-brakes will probably wear through the paint down to the metal. But sweet none the less!
اناعحاتحعبا٦٣٤ع٥ع٣
What vbrakes?
@@chriswilson6118 the brakes that are definitely v-brakes
@@true_mtb I'm gonna have to go back and pay more attention, as I didn't see a Vbrake on it fella ,but I did lose a bit of my will to live when he brought out a different set of wheels 🙄
@@chriswilson6118 I guess they can also be classified as “cantilever” style brakes, but yeah those wheels were a cop out 😑
1 week old rust
Please bro, help me to know what is the green liquid that you put in the pieces at minute 26:07, thanks. Your video is excellent, it helps me to continue gathering strength for a speedy restoration
Artificial rust ? Itd be cool to see where it came from before the restoration begins
Great!
То чувство когда на этом бмх гайки и т.д,откручываються легче чем на мом
Эпично хороша работа 🔥👌