Adam's Heated Carpet Extractor! 200 Degrees! First Thoughts On The Experience Out Of Box.
Вставка
- Опубліковано 19 гру 2022
- Today, we assemble the Adams Heated Carpet Extractor and start to put it through its paces. Adam's Heated Carpet Extractor is an extremely powerful unit that can hold up to 3 gallons of water/solution mix and dispenses at a temperature of roughly 200 degrees. Adam’s Polishes in collaboration with Sandia, an American Business, has hand-picked their compact, high temperature unit to provide the ultimate heated extractor to get those surfaces back to new. This extractor comes with a lifetime warranty on molded components, 2 year warranty on the vacuum and pump,
1-year on all electrical components, 90-days on tools and accessories covered by the manufacture. This extractor is built to withstand years of deep cleaning. In combination with Adam’s Extractor Shampoo, this extractor will extract and sanitize every square inch of your intended surface.
Adams Heated Carpet Extractor...www.amazon.com/s?k=adams+heat...
3 - Gallon Tank Capacity
55 PSI Pump
Single 2 Stage 804 Watt Motor with 100CFM
76" Lift
4” Clear Plastic Upholstery Hand Tool
15 Foot Hose for Tough to Reach Areas
600 Watt Heater for Solution up to 200 Degrees
Easy Removal Dirty Water Tank
Manufactured in USA
Adams Carpet Extractor Shampoo...www.amazon.com/s?k=adams+carp...
✅ ALL PURPOSE CARPET CLEANER FORMULA - Cleans and removes stains with ease using a grease cutting formula. Packs a punch against odor and stains while being gentle on the carpet's original color.
✅ HIGHLY CONCENTRATED SHAMPOOER - Use just 2-3 fl oz per gallon of water in Adam's Heated Carpet Extractor for best upholstery cleansing results. Long-lasting scent with strong spot removing capabilities. Can also be used as an upholstery pre-spray.
✅ LOW FOAMING - Designed to give a deep clean in your vehicles carpet, upholstery, mats, or fabric while keeping a low foam for easy clean up. Use for powerful detailing on the interior of your car.
✅ CITRUS SCENT, MILD PH, COLOR SAFE - Color safe for use on all auto carpet and upholstery. Citrusy scent for long-lasting odor elimination. Restore your automobile's fabric to it's original look, keeping your car looking brand new.
Follow The Apex Detail Support Group on Face Book for any questions, concerns or if you are in need of general detailing knowledge whatsoever!! / 946245059134747
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
www.apexautosurfaceprotection...
Apex Detail Support Group (FaceBook) / 9462450
#carpetextraction #adamspolishes #autodetailing #cardetailing #detailingproducts - Авто та транспорт
Who utilizes an extractor and which one do you use?
Heat spydee 300 I don’t use it to much.
Small Bissell. Not a huge fan of extractor I'm more a steam guy with brushes
I use this Adams 👊🏼
I purchased a used Pro Chem truck Mount from a local chemical supply shop. $2300, but came with 300 feet of vacuum and water lines. Spent $500 to get the entire unit overhauled. I’ve run it an additional 3500 hours since then.
No issues
No leaks
Mounted in the shop
Drains dirty water out back to a in ground tank.
Best investment ever
I have that one your using. Got it about 1 month ago. It’s good. My biggest issue is the handle head is big not easy to use hard to get in tight areas . Also the handle it gets caught on things. Other then that it’s pretty good. So far worth the money spent! Wasn’t cheap.
Excellent as always Brian 👊🏼I’m happy to see you went with my suggestion 🇺🇸
If you place a cloth at the bottom of the back rest, it will save a lot of the cleaner from collecting at the bottom as you extract vertically downward. Awesome video and explanation overall!
Nice review Brian. I've had the Clean Freak version of this exact machine for 2-3 years and it is a great little machine for the few times a year that I have a vehicle bad enough to need extraction.
Hi Brian, I have no need for one as a DIYer, but I just wanted to thank you for all of your valuable YT videos. Happy Holidays!
Never used a extractor before but definitely can see it’s uses. This one looks nice
Way to expensive
Another Great review!
Thatsa proper machine 💪🏾
Try the p&s carpet trio. Carpet bomber in particular changed my whole outlook on cleaning interiors. I also like it for freshening up the carpet that’s in wheel wells, after hitting them with a pulse air cleaner.
I use a Rug Doctor with the hand attachment. Paid $600. Only thing it does not have is a heating element. I just put in hot water and use it immediately.
Good product
I have a Mytee 8070 extractor. I used to use Tuff Stuff upholstery cleaner, then I tried 3D upholstery products. Currently on upholstery I operate a tag team of Meguiar's All Purpose cleaner and Optimum's Carpet & Fabric Cleaner & Protectant.
Great video, Brian. I have a Mytee extractor. It has a 1,000-watt heater and makes lots of hot water. It also has a strong vacuum and will do a pretty good job of pulling out water from carpet and upholstery. It also looks to be easier than the Adams unit, to fill and drain. I've had it for several years now and it's working great.
Which one do you have?
@@WillCall_TRD Mytee Lite 8070.
Interesting!
Really good video and review definitely seems like a decent extractor. I use a dedicated rigid wet n dry vac and bought the nice clear extractor head and hoses that hook up to a water hose. Only downside no hot water ,for small jobs I use a bissell spot pro.
How is the Bissell unit? Does it do really well with deep cleaning or just small stains and spots?
Nice
BTW adams markets this for extra cash. This is based off the Sandia 50-7000 get this instead and save some money
Nice extractor. Since my cars never get that dirty, an extractor isn’t needed. Would get the Sandia version.
I bought a used rental Rug Doctor prox3 and a universal RD wand for just under $400
Do a video on shine supply clay bar vs clay magic
Might be a good extractor, but why pay $400+ more for an Adam's sticker? A quick Google found it for $755 free shipping
Easy a sucker is born every day 💀😂
Exactly! Ridiculous!
Yeah, I have the non heated version of this. I never really used it. It was very powerful, but I do wish the hose was longer.
The sticker makes you a better detailer and also it’s cool
Where? Sandia?
I'm just starting out so I use the Bissell Spot Clean Pro.
How is that unit? Does it do really well with deep cleaning or just small stains and spots?
@RodneyCooperFilmz It works pretty well. At first, the spray was good, and now it dribbles when I depress the trigger. The dribbling sucks but you're going to vacuum it up anyway. Over all, not a bad machine. I'm glad I got it.
@@richsmith3120 thank you. I was thinking of purchasing one, looks good for small spots and stains really. Nothing too crazy I suppose!
@@RodneyCooperFilmz You can clean the carpet and upholstery in a car or SUV but not a complete house living room. 😄 it's also great for pet accidents.
Interesting to hear you say you're primarily an exterior shop. I was thinking about doing an exterior only side-hustle but figured most people are looking for a full meal deal. I may have been wrong on that assumption.
Coatings, polishing, and ppf are where the big money is made.
We specialize in painted surfaces only...but the full meal deal is wise to fill your calendar at first. You can flush them from your itinerary later.
When did extractors get so expensive?! Thanks for the review Brian!
What isnt expensive these days?
hi have you done any other videos on the machine?
Bissell Spot Clean Pro
How is the Bissell unit? Does it do really well with deep cleaning or just small stains and spots?
Hey there! I'm using this on my area rug at home. Borrowing it from my brother and he has never used it before. Where do I dispose of the drained anti-freeze from the system?
Wow for $1,200 and a lift of 76 I am going to have to pass. Thank you very much for this video. I just turned in my notice at my retail management job and being a newb in the area I know I have to pay my dues with nasty interiors. Would I be wise to invest in a cleaner with at least a lift of 100 or more?
sir could i request some reviews on the new sonax stuff?
Does the heater still warm the water when the pump is on? Or is it like a 110 volt hot tub where it. An either heat of pump but not both at the same time.
apex detail your 125 chief steamer as an extracter or this? looking into buying one
Your overspray is diabolical when doing the backs! Water will run down the bottom of the car seat.
Another awesome video and product review good friend
Thank you! Cheers!
Wow. I really wasn’t expecting it to cost that much, especially from Adams. I was thinking maybe $700-$800.
right? Checked the amazon link and the mytee 8070 is the same price.
Just look up heated 3 gallon extractor. You can find the same thing in that price range or less.
This was much cheaper than the last one I had..but with due diligence.. you can find something similar for a better price for sure. I am just sharing my experience with this particular unit.
Pro tip: never add the carpet solution in the water tank because all your doing in putting soap in the carpet and over time or a few days later it’s gonna look like it barely cleaned anything and be have a bad odor always remember to use a separate bottle for the cleaning solution and add half water and solution in a separate bottle spray it own the carpet and let it sit then use only hot water in the extractor I repeat only hot water and nothing else all of this will led to better results
Great video as always Brian.
I must admit, I use a Bissel spot pro. Just a little machine, but it does the job.
I think there is an early point of diminishing returns vs cost with extractors unless you are doing disaster vehicles a lot.
And nobody really wants that! 😁
I use Bissell, too. Until I find a job it can’t handle, I stick with it. I had it at least four years.
@@JustProAutoDetailingInc they a very strong little machines really.
I strip down and service mine every 12 months, including a descale, depending on use.
@@AntEloftheHouseofEl Is there a video on how to strip down a Bisselll?
Can I use a sapphire scientific tool with this machine ?
I'd go for a mytee at this price point
I use a Bissell Spot Pro now, but try to avoid full interior extractions (i use a few Jon Don dri pod fans to aid in drying. They do a good job). I am considering upgrading my cheif accessories to include the steam extractor... just can't find anything definitive on how well (or not so well) it works compared to an extractor like the Adam's or Mytee.
The sandia (adams) is cheaper, but mytee is the gold standard for detailing.
Ammo NYC has a good steam extractor
Why is this one almost 400 dollars more than the same unit on unoclean? Due to branding?
Would not pay $1200.00 for this when for $2500 could buy a 2 stage 500 psi unit that you could do your whole house with. Plus it heats water hot enough can’t use the clear plastic suction nozzle!
Quick tip when we do carpets ( I run a cleaning company) we do not put soaps or carpet cleaners in water as over time they will cause clogging issues with tips and lines. We mix up separately in spray bottle and pre spray. Only a neutralizer goes in clean water. It is important to get carpet, seats whatever back to a neutral state to keep them from attracting dirt/ soil quicker
What machine do you recommend that would clean an entire home for $2,500?
I would mind an extractor, but I'm gonna wait for you to do a really hammered interior and see how it does. Great video Brian.
He doesn't really do bad interiors. It works great if you like to use extractors.
My hammered interior days are gladly in my rear view window. But the next video will show better what it can do.
oof not for me but thanks for sharing with us 🍻🍻🍻
Love the stoner product. I always use tuff stuff when I can get my hands on it. Always wanted a carpet extractor but they were to pricey for me. Seeing I only do cars on the weekends it not in the budget to spend a grand or more on one
Still wouldn’t hurt to get one. Doesn’t have to be high end but even a budget one. Just for the one day you get a car that needs it you already got it. I have a little bissell I’ve been using at first I’ve done it all by hand then got this lil thing . I’m going to buy something like this or different Altho I mostly just clean my car or my lady’s family car . But soon I’m going to be flowing with ppl and I’ll be ready 💪🏾 (I have the little green I want the spot clean that’s the best one)
@@kllaskullz I had the bissell. Just didn’t like the job it did.
I wouldn’t pay that much for a Sandia extractor when a mytee light 8070 or hp 60 spyder could be had for about the same price and they have a stronger heater , stronger pump and a much stronger vacuum. It’s a nice unit , don’t get me wrong, I just feel like it’s a bit over priced especially the adams branded one but even the sandia branded heated extractor is a bit over priced.
My 8070 is a workhorse
@@JPBrister928 I have an up 60 and I still can’t get over how much easier it is to get as close to perfect results as u can, compared to the bisselle spot clean. It’s a night and day difference and I never knew how much of a difference it would be until I used it for the first time, the bisselle leaves everything super wet and the dry time is like 3 hours or more, the go 60 leaves everything almost completely dry, just feels a little damp and dry time is like 45 min - 1 hour give or take depending on if it’s hot or cold outside.
I just have a Bissell.
Ridiculous price for a sticker.. it looks like a good unit but can get the same level of work for much cheaper.
Does the shop Mgr pay u and the crew royalties of each vid watched?lol
I wish!
I am sure I could figure it out, but there were lots of steps, hoses to connect, power line to unreel, etc.
Dimana sy bisa membeli ini di indonesia
Feel there is A LOT of plastic for that price.
Are you sure the anti freeze wasn’t Adams quick detailer? Sure looks like it
It smelled awful...not sure what it was.
The price on this 😳Brian I think you’ve lost your way
You can pick up any model you like... for whatever price you wish to spend.. just showing operation and capability of something in this category.
It's a "mytee" extractor with their name on it lol. That's about it
Mytee lite 8070 III
😁👍🏻
I'm really surprised to hear that it's made in the USA.
First, these are basically off-shoots of Sandia’s 50-7000 model (which usually retails for well under $800). Second, these machines are NOT made or manufactured in USA, they’re assembled in USA … big difference. The suction on these units are subpar by any standard AND the water injection has nearly double what’s standard for professional machines. It’s not a great combo of soaking upholstery excessively while not being able to pull it back out.
Adam’s is selling a relabeled 50-7000 for an over $400 markup.
The Sandia 50-7000 is a total joke. Retail garbage.
If you’re going to invest $1200, buy a Mytee S-300H. It’s a better machine with better suction.
Of course, everyone has an opinion.
😊😊😊
The s300h is literally junk. That alone tells me you don't have a clue.
Ru kidding me 1600.00 get out of here will you.
$1200 😂😂😂😂😂
First!!!
@juan muza 🙏👍💪🇵🇷🇵🇷🇵🇷WEPA