I just got the Amp1 and have been looking at various different pedal solutions - the MS3 seems like the perfect union of everything I need right now and your videos could not be better timed - fun and informative - thank you very much!
@@teos-music Ditched the MS3 as I felt it muddied the amp 1 tone if i had the amp in the ms3 loop. Then if I had the ms3 in the amp loop, I was not using half the effects. Got a GT100 but the same thing occurred in my ears. Now I just use the amp1 and a zoom multistomp CDR70 in the loop for Chorus Delay Reverb...might get the NUX Cerberus....
I put it at the end of the chain, with AMP1 it is speaker out -> DI (to have line level signal) -> mooer radar -> DI(could be necessary or not) , if it is a tube amp it should be speaker out -> load box -> (could be necessary or not DI) -> mooer radar -> DI (could be again necessary or not)
Hi, thank´s for your videos. Could you help me with my problem ? I´ve connected my AMP-1 + MS-3 by your diagram and right midi adaptor and cable too. I can control my AMP-1 thru midi, but the sound from MS-3 doesn´t change. I hear MS preset sounds. Please what do I wrong ? Thank´s for your help.
Hi, if I understood correctly, your amp1's midi learn doesn't work correctly. - Make sure to turn off midi clock on ms3. Use only channel 1 - First use only 2 presets to configure all wanted combinations via midi learn of amp1. Then you can dispatch the presets. - for those 2 presets, use different program change commands. Ms3 doesn't send any commands, if both commands are the same. I hope it helps.
@@teos-music Thank you. I turned off midi clock on MS-3, but I can hear only the sound without AMP1´s preamp. Can I have both conection between these two equipments with 4 cable method and with midi cable? Thank you .
Very strange. If you connect correctly, yes you can use both amp1 and ms3 together which means you can have both ms3 effects before and after amp1's preamp. Do you always activate the loop on ms3 which is connected to the amp1's fx loop?
@@teos-music Very much thanks to you ! That was that problem. The loop on ms3 which is connected to my amp1's fx loop wasn´t activate. Now it´s all right. You helped me. Thank you, sincerely Vojtech (Czech Republic-Europe).
@@teos-music Please give me an advice for this connecting between AMp1 and MS.3. Which possibility FX Loop ( switch at the left side of AMP1) do I choose: serial or parallel. Thank´s for the answer. Regards, Vojtech
@@teos-music Thanks. And I was also wondering about the Mooer Radar. What IR's do you use for it. I'd love to know. Or maybe do a video would be amazing
Hi @@yumisebbag9179 I use official Celestion IRs with my radar (G12M 65 Cream back, G12h 30 and G126 25 Greenback at the moment). It is a nice idea to have a video for that. To help you better, what would you like to see in that video? Anything specifically?
I just got the Amp1 and have been looking at various different pedal solutions - the MS3 seems like the perfect union of everything I need right now and your videos could not be better timed - fun and informative - thank you very much!
Glad to hear it:) I hope you still like your amp1. Do you use MS-3? or decided to use another unit?
@@teos-music Ditched the MS3 as I felt it muddied the amp 1 tone if i had the amp in the ms3 loop. Then if I had the ms3 in the amp loop, I was not using half the effects. Got a GT100 but the same thing occurred in my ears. Now I just use the amp1 and a zoom multistomp CDR70 in the loop for Chorus Delay Reverb...might get the NUX Cerberus....
Excellent !! Exactly what I was looking for , where to place the looper pedal.
Thanks Stephanie VDH!
Where do you put DI box and mooer radar in pedal chain?
I put it at the end of the chain, with AMP1 it is speaker out -> DI (to have line level signal) -> mooer radar -> DI(could be necessary or not) , if it is a tube amp it should be speaker out -> load box -> (could be necessary or not DI) -> mooer radar -> DI (could be again necessary or not)
I have use boss ms3 with two notes revolt, could i connect it with the same way you set with amp1?
Yes, it doesn't matter which amp you use which has a fx loop.
Hi, thank´s for your videos. Could you help me with my problem ? I´ve connected my AMP-1 + MS-3 by your diagram and right midi adaptor and cable too. I can control my AMP-1 thru midi, but the sound from MS-3 doesn´t change. I hear MS preset sounds. Please what do I wrong ? Thank´s for your help.
Hi, if I understood correctly, your amp1's midi learn doesn't work correctly.
- Make sure to turn off midi clock on ms3. Use only channel 1
- First use only 2 presets to configure all wanted combinations via midi learn of amp1. Then you can dispatch the presets.
- for those 2 presets, use different program change commands. Ms3 doesn't send any commands, if both commands are the same.
I hope it helps.
@@teos-music Thank you. I turned off midi clock on MS-3, but I can hear only the sound without AMP1´s preamp. Can I have both conection between these two equipments with 4 cable method and with midi cable? Thank you .
Very strange. If you connect correctly, yes you can use both amp1 and ms3 together which means you can have both ms3 effects before and after amp1's preamp. Do you always activate the loop on ms3 which is connected to the amp1's fx loop?
@@teos-music Very much thanks to you ! That was that problem. The loop on ms3 which is connected to my amp1's fx loop wasn´t activate. Now it´s all right. You helped me. Thank you, sincerely Vojtech (Czech Republic-Europe).
@@teos-music Please give me an advice for this connecting between AMp1 and MS.3. Which possibility FX Loop ( switch at the left side of AMP1) do I choose: serial or parallel. Thank´s for the answer. Regards, Vojtech
Hey. Do you You use The Amp 1 effects loop.
In serial or Parallel? (The switch on the right side)
Hi Yumi, I use fx loop in serial.
@@teos-music Thanks.
And I was also wondering about the Mooer Radar.
What IR's do you use for it.
I'd love to know.
Or maybe do a video would be amazing
Hi @@yumisebbag9179 I use official Celestion IRs with my radar (G12M 65 Cream back, G12h 30 and G126 25 Greenback at the moment). It is a nice idea to have a video for that. To help you better, what would you like to see in that video? Anything specifically?
@@teos-music I'd like to see the various sounds you can get out of it. The Eq section. The power section explained.