besides good tires, steel braided brake lines are one of the most important upgrades you can do to a bike! i just got an '05 CBR600rr and I'm throwing steel braids on it right away! it's already got exhaust and all that done. man, what a sweet bike! lol. i love the 05-06 and 07-08's! excellent video man!
are you sure the banjo bolt only need to torqued 8 ft pound? on my Honda the service manual calls for 25 ft pound torque on those banjos, you might need to double check
Did you use the frame mounted line clamp from Galfer? The thing puts the lines between the frame and triple tree. The lines get pinched when you turn the bars to the left. To fix it modify the oem clamp to have room for both lines and use that. There is a cavity for the lines on the frame and oem clamp keeps them in there and not pinched! Be careful!
YES they do! Between the braided lines and my gear indicator I cannot tell which has been my favorite mod. The feeling of the brake lever is so much better.
just want you to know that you got a youtuber here learning off you ;) btw, what are those mirrors? I was thinking to change mine due to the vibration (as all bikes). I bought Hel braided lines, will be fitting them in once we get out of the winter. and also, you have a gear indicator, was it difficult to install?
when braking with stock rubber cables, they expand so much, feeling mushy and less responsive, steel braided is so much more precise and thet last forever! lol... plus they look sick! lol
I see you are using shorter clutch and brake levers. Could you tell me which ones? My Barracuda levers on the CB1000R are uncomfortable and think I want those shorter ones as well. Thanks again!
No lol that was some footage from back in August. I just had to stick something in there for the voice over. If you look closely you can see I still had the stock lines in. lol
Hey, was the plug in the middle of your triple clamp stock on your bike or is it from the 2013? (8:50 lower edge of the video) My bike does not have it and I am searching which one I should take. Thanks. Mike
nice man ! .. I track my cbr but it's not fully a track bike seeing how it's also my daily bike .. I was talking to a national ducati champion and I was asking him about rotors cause I want to stop Hella fast .. anyways he asked me if I had Steele braided lines .. I said no .. he said I should get those but before investing in rotors that can be expensive he said just buy aftermarket break pads .. said they make a ton of difference .. so these two will be my winter project .. do you have oem pads ?
I believe my front are original, but I did replace the rear (not that it needed it). I agree with him you'll be surprised at the different the stainless lines make. It's great for the street and I bet great for the track too. I highly recommend galfer, my friend upgraded his lines too but he used a cheaper brand and they didn't look as good.
@HeroRR what is the length of the lines? I got a pair of Hel lines and I think they are too long for my bike but I want to make sure before I go and argue with the store.
I've got an orange set of Hel lines to put on my cbr1000rr, your video has given me the encouragement I needed to finally fit them 😁!
besides good tires, steel braided brake lines are one of the most important upgrades you can do to a bike! i just got an '05 CBR600rr and I'm throwing steel braids on it right away! it's already got exhaust and all that done. man, what a sweet bike! lol. i love the 05-06 and 07-08's! excellent video man!
got a SS braided front brake line for my bike as well and truly it does work better than the stock its just precise 👌
are you sure the banjo bolt only need to torqued 8 ft pound? on my Honda the service manual calls for 25 ft pound torque on those banjos, you might need to double check
Did you use the frame mounted line clamp from Galfer? The thing puts the lines between the frame and triple tree. The lines get pinched when you turn the bars to the left. To fix it modify the oem clamp to have room for both lines and use that. There is a cavity for the lines on the frame and oem clamp keeps them in there and not pinched! Be careful!
Where did you purchase the black cap for your center stem ring? I have been looking for that item all over the place.
thank you for this video, very informative!!!! even though i dont have a cbr yet it gives me a great a idea on what to do. thanks brada!
They make that big of a difference? If so I might have to get some for my 600rr!
YES they do! Between the braided lines and my gear indicator I cannot tell which has been my favorite mod. The feeling of the brake lever is so much better.
they also look great too :)
HEROrr Yeah man I remember you telling me about the gear indicator at ZJs meet. I still need to get one of those!
Oh are you the guy from Canada? Sorry I have bad memory lol.
HEROrr Yup Im the Canadian lol
very nicely done.. detailed and easy to follow as a project.
just want you to know that you got a youtuber here learning off you ;) btw, what are those mirrors? I was thinking to change mine due to the vibration (as all bikes). I bought Hel braided lines, will be fitting them in once we get out of the winter. and also, you have a gear indicator, was it difficult to install?
What's your opinion on the core moto ones?
they are great
when braking with stock rubber cables, they expand so much, feeling mushy and less responsive, steel braided is so much more precise and thet last forever! lol... plus they look sick! lol
I think I have about 5 different 10 mm wrenches floating around somewhere in the garage too!
I see you are using shorter clutch and brake levers. Could you tell me which ones? My Barracuda levers on the CB1000R are uncomfortable and think I want those shorter ones as well. Thanks again!
ASV
it's tutorial video. Thanks :^)
is that Kawasaki mirrors @8:20 ?
the footage where you were riding, was that that wacky day a couple weeks ago where it was like 75 degrees for some reason?
No lol that was some footage from back in August. I just had to stick something in there for the voice over. If you look closely you can see I still had the stock lines in. lol
***** ah alright
build vids for the fz09 too that bike is so cool
How to you get that metal clip on the top of the reservoir off ? It’s holding the cap on.
use a screwdriver LOL
Hey, was the plug in the middle of your triple clamp stock on your bike or is it from the 2013? (8:50 lower edge of the video)
My bike does not have it and I am searching which one I should take. Thanks. Mike
When bleeding brakes you're supposed to bleed furthest away caliper first, then nearer, then master cylinder last.
What mirrors are you running.
What kind of brake/clutch levers are those?
What is name of the song at the end of the video.
nice man ! .. I track my cbr but it's not fully a track bike seeing how it's also my daily bike .. I was talking to a national ducati champion and I was asking him about rotors cause I want to stop Hella fast .. anyways he asked me if I had Steele braided lines .. I said no .. he said I should get those but before investing in rotors that can be expensive he said just buy aftermarket break pads .. said they make a ton of difference .. so these two will be my winter project .. do you have oem pads ?
I believe my front are original, but I did replace the rear (not that it needed it). I agree with him you'll be surprised at the different the stainless lines make. It's great for the street and I bet great for the track too. I highly recommend galfer, my friend upgraded his lines too but he used a cheaper brand and they didn't look as good.
nice of u to put all those links. thumbs
I'm planning to do this to my bike by year end.
Nice video man.
BTw what license plate holder / do you have?
akra plate holder, I don't think they make it anymore.
good video man and appreciate them zx 6 links 2
Nice vid
my first bike going to be an R6 and i am going to do the samething
too confusing... rigged my brake line to my rear emergency car tire
stopie time
Nice vid, just sub you!
👏👏👏👏👏🔝🔝🔝💯😉👍
Afraid the brakes lock up lol
1st
2nd!!
HEROrr 3rd!!!!
@@HeroRR is any difference in lenght between left and right? Do you know the hoses lenght?
@HeroRR what is the length of the lines? I got a pair of Hel lines and I think they are too long for my bike but I want to make sure before I go and argue with the store.