Pop a Dent vs Harbor Freight Crossbar Dent Repair Review
Вставка
- Опубліковано 21 вер 2024
- I have an old work van that I decided to try these two paintless dent remover kits on. I was highly impressed by both the Pittsburgh crossbar dent repair kit and the pop a dent kit. In the end, I think the Harbor Freight kit was not only a better deal, but also did a better repair.
NOTE: I AM NOT CHEWING ON GUM. THAT'S THE SOUND THE TOOL MAKES WHEN IT'S LIFTING THE DENT.
If you tap around the edge of the dent it will help agitate the metal and the metal will try to return to the original shape. I have done that technique with out that device just by massaging the metal back up. And the dents were bigger than those. It will work on small dents also. With the pull from the tool and the tapping at the edge of the dent area it should pop up pretty fast. Try it!
NOTE: I AM NOT CHEWING GUM. That is the sound that the tool makes when it's lifting the dent.
Good video,. Good test!!! 💐💵💐💵💐
that tool is for finishing big dents or small only. the aluminum suction cup would better for that big dent or the air tool version.
Thanks for the vid. Gonna try on a refrigerator door dent!!
Feral Cypher iii
Great video this helped a lot. And im not sure why people think you're chewing gum. I guess maybe they should pay attention to what you're doing to the car rather then you're self.lol
How to buy.i have important.. Please send the link
Excellent video
Which is better PoP a Dent or HFT Cross Bar Dent puller?! WTF?! NOT TOLD! Kindly say which best!!!!
It all depends on the dent you are working on. Each had a benefit, so I would be it on the size of the dent and shape. Which one fits best, that's the one to use.
@@salhanna9375 ok,. Sounds like the length of the puller vs size of the dent... That's it?!
@@teedtad2534 correct.
Superb demo.
I use upside down computer duster to cool the glue and the area instantly thus avoiding the need to wait for the glue to cool at room temp
hector hurtado nice, but it takes about 1-2 minutes for the glue to cool so it's not worth spending the extra money on a can of air in my opinion.
hector hurtado how does the glue cool if metal is hot?
So which one is the better dent/ding puller out of those two?
Thanks for the Video
EL EVO I preferred the Harbor Freight tool. (Metal version)
Super 👍😉😀
Hello, i watched you video, niice by the way, glad it worked.
Question though...was that tested on real metal or was it fiberglass???...thank you.
Metal. Fiberglass can't be pulled as it's a rigid material that will break if bent.
@@salhanna9375 Even better. You see, i have a Nissan, it's that type of hard or thick metal and it has a small dent i am going to attempt taking out my self thanks to your video.
SO, WHERE'S THE "VS." IN THIS VIDJO?
You got lucky... My harbor freight tool snapped & broke at the head... I will get a flat washer & finish the job somehow...
does the glue came off easy after the pop out?
Yes it peels right off
So which is better pop a dent or harbor freight
The Harbor Freight device is better
the harbor freight tool has slots to slide the feet in or out for more concentrated pull area..its the better tool.. & get a HEAT GUN it will make ya life easier
Hi. wondering what a heat gun will do and how it makes it easier? thanks
@@EnjoyLifeFC Any heat gun will work. You can buy both at Harbor Freight.
My harbor freight one broke in half
Who films in vertical?
It does not work...i tried many times
It looks like plain gluesticks I like the black ones.
Chew all the gum you want thanks for the info I don't know why people expect you to be 007 or prince Harry while doing a Dents and ding's video .
As I've said repeatedly, the clicking is the tool and not gum.
You put to much glue ! And it only works on small dents !!!!
That's funny because it took out large dents just fine.
Nice job. Quit smacking on the gum though. Lol
Felix/ JPC the clicking is the tool. I'm not chewing gum.