Chuck, Is so enthusiastic with what ever he does. He should have been a school teacher. Thanks Chuck for being the way you are. I have 19 Hatchets to make sheaths for.
What a professional. The man is in a freshly pressed, starched long sleeve shirt, and spotless. I’ll have glue and dye every where, my hands, clothes, and work surface.
I'm a beginner and therefore have viewed a whole lot of how-to videos on making leather axe sheaths, almost all of them truly helpful. However, none of them compare to the thoroughness and simplicity of this one. I wish I had started here, but better late than never. Chuck never fails to educate, but more than that, he inspires. Bravo, Chuck and Weaver!
I just sold a commercial axe because I decided I wanted to build my own. It's meant as a general-purpose axe for the truck and for woods bumming. I found a vintage, 2# head in good condition (too many have mangled eyes from people using the poll as a hammer) on eBay. I ordered a 28" boy's axe handle in red elm from Chris Killinger. So yes, I now have to make a sheath. Check out Killinger's channel. The Essential Craftsman has a ton of info from what he knows (he's a professional carpenter) to what he's learning (blacksmithing, plumbing). And if Buckin' Billy Ray Smith doesn't get you fired up, have someone check your pulse: you may be dead.
I kinda did this design it was my very first project with leather crafting. It was pretty tough hand stitching the end with the welp. Took me all afternoon to make a sheath for my hatchet :) I learned alot watching his classes. :)
You looked like that last take had to be done a few times, spinning that axe on your finger really made you smile 😀 loved the look on,your face. Great project and great instruction thank you 😊
It’s actually not hard. Though I’d recommend practicing with a hammer first. Step by step 1: grip the strike face with your baby finger, handle down. 2: swing forward, and up with your elbow. 3: smoothly release the grip of your pinky, as you stop the swing. 4: the hammer/axe should rotate across the outside of your fingers and back into your palm.
Ok Weaver Supply Company, I watched Mr. Chuck here and I must say he taught me a lot and has a great personality for instruction. I enjoyed it so much I subscribed and bought some leather and supplies. Following Mr. Chuck’s instructions I actually made my first sheath for my axe. Not to brag, but I impressed myself. 😁 Thanks again for the great video and new hobby. Sincerely, New Customer Eric
Thank you for the video , it's trying to come up with some ideas for my Cold steel " rifleman's hawk " leather sheath . Bought the material and a starter leather craft kit First time just needed some ideas and inspiration thank you .
Well thanks to you I am now noticing details in leather sheaths, cases, and other things that I own where they just didn’t take care of the details, and now I want to fix it. I’m also looking at chafe gear I’ve made for my boat and thinking “I could really improve this, and now I know exactly what to do”. Your videos are the perfect thing for a life of learning. Thanks!
I wish I have this amount of energy when I get to this guy's age! What a champ! Had a little hard time follow every step, but as someone mentioned, it's quarantene; I can watch this video all day!
So upbeat and encouraging. It's like you've given me confidence to work it out. I love the programs that is going on. Step by step guidance. I am using scrap pieces and very primitive tools. Have already replaced the handle 2x and busted out a couple of functional sheaths. Mostly used what I have...duct tape and 12pk cardboard can go a long way, 2 years in a kitchen. Then moved to plastics and knots. Good design if your any good at drumming or macrame. But both of these were too tight and dulled my knives,. Can't tolerate a full knife on a restaurant line. Thank you good entertainment and knowledge base. Q? How would I get the nice edge without the nifty tool,. I figure a willow or softer wood would do it. Love your knives, hatchets, and tools and they will love you back with hard work.
Chuck, I love the way you teach. The enthusiasm makes you want to watch over and over. You are just great at what you do and I sincerely thank you for the knowledge!
Will chuck just finished a hatchet sheath about 2 months it was a real pain in the BUTT very odd head shape . I had to make 3 believe it or not to get the fit and look where I wanted it . The only good thing about my project I was able to us scrap. Just finished up my first belt and with the help of your video had zero problems. I did not us snaps or screws just saddle stitching also did not have the great leather so I doubled it. This belt is strictly an out door belt for hunting camping and fishing trips . I made it 10 inches longer than need be to go around a heavy coat . now I need to make some pouches just finished the wooden mold for wet molding but not really sure I want to go that way , I am thinking of trying some box stitching always wanted to try that I did make a holder for box stitching just not have made up my yet . Happy trails and thanks again for all the great instructive vedio's.
Hi there Chuck! This video reminded me I have a crescent knife (a boline, I think it's called?) and I've wanted to make a sheath for it for years! I wasn't sure how to go about it until I saw you make a welt. My project will be a bit more complicated just due to the general shape of the item, but you've given me a great jumping off point. I'm inspired! Thanks a bunch!
Your channel has helped me improve my skills and knowledge exponentially. My sheaths went from scraps of leather stuck together to clean professional looking items.
I have made alot more axe sheaths than I ever thought, so I have developed several different patterns to make each one as unique as possible. Great looking sheath and a nice color.
Thanks for lightening up our morning. Love the long videos. Great looking sheath. Something I have done on thick layered projects when tying off is to pass all the way through from the thick side and then go back through the single layer, then bring the other thread through the single layer and tie. Didn't look like you had any problems there, on some projects it can help to keep the firmness if we don't have to flex the leather getting the needle through. Thanks again.
Hi Tyler! We hope you give leatherworking a try! We just posted a new video with a pretty easy beginner project if you would like to check it out: ua-cam.com/video/90j_vG4i7fA/v-deo.html
Hey Chuck, first of all I love your channel and all of your videos. I do not understate when I say, that you are a kind of a mentor to me. I improved my leather work so much with your advices and tipps. I’ve got an “economical” suggestion for a video about knife blades. With a sharpening wood one can turn “every time new blade” into “every time sharpened knife”. I use jeweler’s rouge on mine. Greetings from germany (:
Great video. I am going to remake all my ax covers. The ones I have look like a grade-schooler made them. I see now how to put in a welt. Thakns Chuck.
Well done Chuck. This takes me back to one of my first leather projects... A cover for my axe bit. A tip for future video content: Leather muzzleloading accoutrements... Shooting bags, powder horn straps, flint wallets, tomahawk sheaths... "The sky's the limit" on that stuff. And you'll gain some more viewers.
Chuck, I am a vendor at Ren Faires and need to make a cross carry double bit axe sheath. I make the sheathes now for my axes. I want to add a carry strap
Thank You Chuck that was great! I have often wondered about using a drill press but was scared I would mess up a project. Always thinking tradition. Thanks again!!!
Hey chuck love your work I mostly do holsters and western rigs but was wondering can you or do you have a video on making speed loader cases thanks monroe teems
Awesome! you've got some great talent! Fantastic video too! easy to follow, and you're so positive! liked and subscribed! I'll share my axe sheath once its done! thanks again!
It's hard not to get caught up in Chuck's enthusiasm. I want to go make something now, except it's late at night and I'm in bed. But I'll tell you, I'll get making something soon.
Hello Sir : have you ever thought in making things for Falconry? Sure could more people to buy from. Take a look an see what you think? Like Hoods,Anklets with two holes one for jesses an top hole for bells. Thanks
Quick question... I know its a trick we used to use on metal, plexiglass, lexan, etc... I get the concept of the rounded inside corner. We used to put a small hole at the corners or the end of cracks. That held it at the hole. Does that work on leather as well? Or is it still really prone to tear even with just a small hole?
Here I was saying to myself "Wow, Chuck is so experienced that he eyeballed the exact length of thread he needed." As soon as I finished the thought you say, " I could have used a little more thread." You jump right off the pedestal I placed you on. Oh well, you're still my favorite leather craftsman. I noticed you didn't use Gum Tragacanth or Water when doing your edges. Did I just miss it or was there a reason for not using an edge finish to burnish with? I enjoy your videos, you inspire confidence.
Love the sheath. I made one for my Estwing axe. Different that how you made it, but your looks much nicer. I leave mine in my UTV all the time. Is there a product that can help protect the leather from being outside all the time? It is protected from rain and direct water, but it is outside all the time.
Do you not find that drilling holes weakens the overall project? Wouldn’t it be better to use a diamond awl? I find that properly sharpened awl pushes the leather to the side of the hole it makes compressing it and making it stronger.
At 16:41 you start talking about staying in the groove line with the marker wheel but I've watched the video 4 or 5 time and I can't seem to follow where you put in the groove line.
Make sure the leather you are salvaging isn't cracked or close to cracking. If you clean it and condition it with some leather cleaner and conditioner you can cut it out according to your pattern and use as you would a new piece of leather. Hope that helps!
Hey thanks so much for this tutorial, but how do you prevent the contact cement from interfering with the dye? I've ruined a few projects because the glued parts wouldn't take dye and as a result I've started dying first on all of my projects. Seeing this tutorial makes me think there must be something I'm not getting about how to properly apply glue. Anyway thanks and I love the channel
HI Morgan, If there's any glue on the edge of the project, take some sandpaper and sand it off before dyeing. Otherwise the glue should only be sandwiched between the two pieces of leather and not visible. Hope that helps!
My idea was that I could make a sheath cheaper than buying one, but buying all those leather crafting tools isn’t going to work. Do you think I could make one for my splitting maul without breaking the bank? I just need something to cover the sharp blade edge when I’m just going to use the sledge hammer side. I didn’t realize how sharp it was, and then it cut my leg without any pressure behind it. It just barely grazed my leg and it cut the entire length of the blade and wouldn’t stop bleeding until I cleaned it and bandaged it up. Thanks for your help.
You should be able to make one without breaking the bank, some things like a straight edge and utility knife you may already have. The things you'll probably need to invest in would be, stitching chisels, needles and thread. Potentially a hole punch and snap setter if you're wanting to set a snap but there are alternate options you could use for a closure strap. Hope that helps!
How can you click 'dislike' on one of Chuck's videos? It's like slapping a puppy! Never seen a more positive human being.
Andrew Gray
Right?!?
Clearly whoever did that has personal issues.
It's to stop recommendations , if you dislike a video UA-cam stops suggesting those videos.
I swear I watch these just for the energy this guy has he’s just awesome lol
Down to earth tutorial with no loud music by a professional person who talks with skill and gives options with methods for new starter great.
Chuck is the man!
Oddly he never seems to blink
Chuck, Is so enthusiastic with what ever he does.
He should have been a school teacher.
Thanks Chuck for being the way you are.
I have 19 Hatchets to make sheaths for.
28:54 Ok Chuck! That was the smoothest Ax flip.
What a professional. The man is in a freshly pressed, starched long sleeve shirt, and spotless. I’ll have glue and dye every where, my hands, clothes, and work surface.
This man is so professional and great at explaining every detail. Thanks.
Thank you so much!
I'm a beginner and therefore have viewed a whole lot of how-to videos on making leather axe sheaths, almost all of them truly helpful. However, none of them compare to the thoroughness and simplicity of this one. I wish I had started here, but better late than never. Chuck never fails to educate, but more than that, he inspires. Bravo, Chuck and Weaver!
Thank you so much!
You're an excellent teacher Chuck. Thanks
This guy is such a good teacher make me wanna build one those, and I don’t even own a axe. Outstanding job lad.
I just sold a commercial axe because I decided I wanted to build my own. It's meant as a general-purpose axe for the truck and for woods bumming. I found a vintage, 2# head in good condition (too many have mangled eyes from people using the poll as a hammer) on eBay. I ordered a 28" boy's axe handle in red elm from Chris Killinger. So yes, I now have to make a sheath.
Check out Killinger's channel. The Essential Craftsman has a ton of info from what he knows (he's a professional carpenter) to what he's learning (blacksmithing, plumbing). And if Buckin' Billy Ray Smith doesn't get you fired up, have someone check your pulse: you may be dead.
@@darylnd Many hatchets are made to be multifunctional with the poll/butt usable as a hammer...
(25:28) I'm affraid that's a bouscout knot 👍... Wonderful job, Master 👏
Someone hiring me to make a leather sheath for an Axe. I will follow this video. Thanks for showing how is done.
Hope it turns out great!
@@WeaverLeatherSupply I'm working on it right now. Thank you so much for your replied. I watched your videos all the time.😃
Chuck perfect as always!!
adding the link to a page that has all of the parts/tools etc on it is a great idea!
Nice Axe Sheath Chuck! 😊
I cannot get enough of the insight from this company. Chuck you are the man! Only reason it's Dorset cuz Norris is taken😂.
Sweet axe flip at the end Chuck. An awesome project as always!
I kinda did this design it was my very first project with leather crafting. It was pretty tough hand stitching the end with the welp. Took me all afternoon to make a sheath for my hatchet :) I learned alot watching his classes. :)
You looked like that last take had to be done a few times, spinning that axe on your finger really made you smile 😀 loved the look on,your face. Great project and great instruction thank you 😊
It’s actually not hard. Though I’d recommend practicing with a hammer first.
Step by step
1: grip the strike face with your baby finger, handle down.
2: swing forward, and up with your elbow.
3: smoothly release the grip of your pinky, as you stop the swing.
4: the hammer/axe should rotate across the outside of your fingers and back into your palm.
Ok Weaver Supply Company, I watched Mr. Chuck here and I must say he taught me a lot and has a great personality for instruction. I enjoyed it so much I subscribed and bought some leather and supplies. Following Mr. Chuck’s instructions I actually made my first sheath for my axe. Not to brag, but I impressed myself. 😁 Thanks again for the great video and new hobby.
Sincerely,
New Customer Eric
That's great to hear, Eric - so glad the sheath turned out well! Thank you so much!
Love that little spin of the axe at the end! Fantastic piece as always.
Thank you very much!
I've watched hundreds of axe sheath videos - this one is the best by a long way! Well done!
Another great video Chuck
Great axe spin Chuck, very professional ! Thanks for this video
I love these videos, well done camera angles, clear instructions , probably best I’ve seen on UA-cam
Thank you so much!
This is the way a master works... just amazes me
Thank you for the video , it's trying to come up with some ideas for my Cold steel " rifleman's hawk " leather sheath . Bought the material and a starter leather craft kit First time just needed some ideas and inspiration thank you .
Well thanks to you I am now noticing details in leather sheaths, cases, and other things that I own where they just didn’t take care of the details, and now I want to fix it. I’m also looking at chafe gear I’ve made for my boat and thinking “I could really improve this, and now I know exactly what to do”. Your videos are the perfect thing for a life of learning. Thanks!
Thanks so much, Sean!
I wish I have this amount of energy when I get to this guy's age! What a champ! Had a little hard time follow every step, but as someone mentioned, it's quarantene; I can watch this video all day!
Chuck? He's only 25!
The leather man !
Nice job no bull .
Man I love watching Chucks videos! But now I'm $400 into leather crafting tools!
Chuck, you did a beautiful job!
So upbeat and encouraging. It's like you've given me confidence to work it out.
I love the programs that is going on. Step by step guidance. I am using scrap pieces and very primitive tools. Have already replaced the handle 2x and busted out a couple of functional sheaths. Mostly used what I have...duct tape and 12pk cardboard can go a long way, 2 years in a kitchen. Then moved to plastics and knots. Good design if your any good at drumming or macrame. But both of these were too tight and dulled my knives,. Can't tolerate a full knife on a restaurant line. Thank you good entertainment and knowledge base.
Q? How would I get the nice edge without the nifty tool,. I figure a willow or softer wood would do it.
Love your knives, hatchets, and tools and they will love you back with hard work.
I hope Weaver Leather understands how much business you bring in for them based on these amazing videos.... and hook you up with Bonus’s!!!
Chuck, I love the way you teach. The enthusiasm makes you want to watch over and over. You are just great at what you do and I sincerely thank you for the knowledge!
Thank you so much, Jennifer!
I just discovered these tutorials. Love it! Great job! Very informative and well delivered.
Thank you so much!
Will chuck just finished a hatchet sheath about 2 months it was a real pain in the BUTT very odd head shape . I had to make 3 believe it or not to get the fit and look where I wanted it . The only good thing about my project I was able to us scrap. Just finished up my first belt and with the help of your video had zero problems. I did not us snaps or screws just saddle stitching also did not have the great leather so I doubled it. This belt is strictly an out door belt for hunting camping and fishing trips . I made it 10 inches longer than need be to go around a heavy coat . now I need to make some pouches just finished the wooden mold for wet molding but not really sure I want to go that way , I am thinking of trying some box stitching always wanted to try that I did make a holder for box stitching just not have made up my yet . Happy trails and thanks again for all the great instructive vedio's.
Hi there Chuck! This video reminded me I have a crescent knife (a boline, I think it's called?) and I've wanted to make a sheath for it for years! I wasn't sure how to go about it until I saw you make a welt. My project will be a bit more complicated just due to the general shape of the item, but you've given me a great jumping off point. I'm inspired! Thanks a bunch!
That's great to hear! Thank you so much fro watching!
Great video, Chuck.. must be great working for a company, that encourages you to make what you love, and also teach the rest of us. Thanks again.
A spell binding view and a classic case of a master making something look easy.
Just watching your enthusiastic presentation(s) is becoming a hobby in its own right. Love it
Thanks again Chuck
Your channel has helped me improve my skills and knowledge exponentially. My sheaths went from scraps of leather stuck together to clean professional looking items.
Thank you so much, Daniel!
Loved the video, especially the welt design.
Thank you, John!
Thank you! I found this helpfull while making my own version.
Glad it helped!
Wayne Thanks Chuck , great video as always .
Nothing like a bic pen. Very informative video
This the first video in a long time where I got excited about a craft. I wish there was a store I could go to do this kind of work.
I have made alot more axe sheaths than I ever thought, so I have developed several different patterns to make each one as unique as possible. Great looking sheath and a nice color.
Thank you, Robert!
You do nice work sir
Thanks for a video again. Maybe can do video about french style chisels and stitching?
Great video Chuck veteran crafter and still love watching Different technique
Wonderfull, it´s quarentine time, let´s study!!! Cheers from Brazil!
Cheers! Thanks o much for watching!
Thanks for lightening up our morning. Love the long videos. Great looking sheath. Something I have done on thick layered projects when tying off is to pass all the way through from the thick side and then go back through the single layer, then bring the other thread through the single layer and tie. Didn't look like you had any problems there, on some projects it can help to keep the firmness if we don't have to flex the leather getting the needle through. Thanks again.
I’ve been interested and wanting to start leather crafting for some time now just don’t know where to start! Chuck just makes it looks so fun and easy
Hi Tyler!
We hope you give leatherworking a try! We just posted a new video with a pretty easy beginner project if you would like to check it out: ua-cam.com/video/90j_vG4i7fA/v-deo.html
Hey Chuck, first of all I love your channel and all of your videos. I do not understate when I say, that you are a kind of a mentor to me. I improved my leather work so much with your advices and tipps. I’ve got an “economical” suggestion for a video about knife blades. With a sharpening wood one can turn “every time new blade” into “every time sharpened knife”. I use jeweler’s rouge on mine. Greetings from germany (:
Thank you so much and we appreciate the suggestion!
Hi bro I love leather craft works , you are way of craft work style is much more different by others I like it,,🤗
Great video. I am going to remake all my ax covers. The ones I have look like a grade-schooler made them. I see now how to put in a welt. Thakns Chuck.
Thank you! Glad it was helpful!
Well done Chuck. This takes me back to one of my first leather projects... A cover for my axe bit.
A tip for future video content: Leather muzzleloading accoutrements... Shooting bags, powder horn straps, flint wallets, tomahawk sheaths... "The sky's the limit" on that stuff. And you'll gain some more viewers.
Very good looking axe sheath and helpful video Chuck. I always pick up some great time saving tips from you
I made one of these for my ax last night, would love to share a photo with you!
This guy is amazing :)
Very nice job. Great instruction and good video. Well done!
Chuck, I am a vendor at Ren Faires and need to make a cross carry double bit axe sheath. I make the sheathes now for my axes. I want to add a carry strap
Love the show! Could you give us some tips on using the strap cutter? You make it look easy, but it's kind of a finicky tool for me, thanks!
Hi Devin,
See if the video below helps!
weaverleathersupply.com/learn/how-to-videos/tools/working-with-the-wooden-strap-cutter
Always a joy to watch your videos, lots of good information!
Thank You Chuck that was great! I have often wondered about using a drill press but was scared I would mess up a project. Always thinking tradition. Thanks again!!!
Hey Chuck! Love the videos 😎🙏💪
Thank you so much!
Hey chuck love your work I mostly do holsters and western rigs but was wondering can you or do you have a video on making speed loader cases thanks monroe teems
Awesome! you've got some great talent! Fantastic video too! easy to follow, and you're so positive! liked and subscribed! I'll share my axe sheath once its done! thanks again!
Thank you so much!
thank you for the awesome tutorial. i made one for my daughters axe !
That's great to hear - thank you for watching!
And he didn't even get dye on his shirt sleeve. A true master.
You can't get dye on your sleeves if you don't have any sleeves to dye
It's hard not to get caught up in Chuck's enthusiasm. I want to go make something now, except it's late at night and I'm in bed. But I'll tell you, I'll get making something soon.
You are awesome!! Beautiful work!!
Thank you, Charlie!
@@WeaverLeatherSupply Yessir!👍👍
Hello Sir : have you ever thought in making things for Falconry? Sure could more people to buy from. Take a look an see what you think? Like Hoods,Anklets with two holes one for jesses an top hole for bells. Thanks
Thanks God for quarantene right now - I can spend 8 hours of watching this on repeat instead doing it only 2-3 times at work secretly.
Looks great, you make it look so easy 👍
Every shop, no matter what you do, should have one good axe. Never know when zombies or bill collectors might attack.
Tru dat
Quick question... I know its a trick we used to use on metal, plexiglass, lexan, etc... I get the concept of the rounded inside corner. We used to put a small hole at the corners or the end of cracks. That held it at the hole. Does that work on leather as well? Or is it still really prone to tear even with just a small hole?
Great tutorial I need to make one for an axe I have. This is great timing, thank you
Beautifully done 👍👍.
Thank you so much. This was a great video
Thank you, Clayton!
Here I was saying to myself "Wow, Chuck is so experienced that he eyeballed the exact length of thread he needed." As soon as I finished the thought you say, " I could have used a little more thread." You jump right off the pedestal I placed you on. Oh well, you're still my favorite leather craftsman. I noticed you didn't use Gum Tragacanth or Water when doing your edges. Did I just miss it or was there a reason for not using an edge finish to burnish with? I enjoy your videos, you inspire confidence.
Hi Ray! I used water for the edge burnishing and I apologize if it wasn’t explained well in the video!
Another excellent video. I just made one of these a few days ago. A great project.
Awesome work! 😃👍🏻👊🏻
Love the sheath. I made one for my Estwing axe. Different that how you made it, but your looks much nicer. I leave mine in my UTV all the time. Is there a product that can help protect the leather from being outside all the time? It is protected from rain and direct water, but it is outside all the time.
Hi Chris, you can always condition it with a good leather conditioner like Aussie or Oakwood. That will help protect it from the elements.
Do you not find that drilling holes weakens the overall project? Wouldn’t it be better to use a diamond awl? I find that properly sharpened awl pushes the leather to the side of the hole it makes compressing it and making it stronger.
This is a great video -thanks
Can you make a belt clip leather sheath for hatchet ?
Great suggestion! Thank you for watching our video.
At 16:41 you start talking about staying in the groove line with the marker wheel but I've watched the video 4 or 5 time and I can't seem to follow where you put in the groove line.
Hi there, at 8:11 is when the groove line is added all the way around the sheath. Hope that helps!
Doesn’t Sadler’s Stitching require a Diamond bladed Awl.?
Great info Chuck. I'm hoping to use leather from a favorite pair of work boots that I've worn out. Any tips for using salvaged leather?
Make sure the leather you are salvaging isn't cracked or close to cracking. If you clean it and condition it with some leather cleaner and conditioner you can cut it out according to your pattern and use as you would a new piece of leather. Hope that helps!
I've never seen that style of axe before. What is the make and model of it?
Chuck how come you never back stitch when you come to the end of the stitch line??
Hi Michael, I just prefer to use a knot. No specific reason, I just like the security but it’s all personal preference.
Hey thanks so much for this tutorial, but how do you prevent the contact cement from interfering with the dye? I've ruined a few projects because the glued parts wouldn't take dye and as a result I've started dying first on all of my projects. Seeing this tutorial makes me think there must be something I'm not getting about how to properly apply glue.
Anyway thanks and I love the channel
HI Morgan,
If there's any glue on the edge of the project, take some sandpaper and sand it off before dyeing. Otherwise the glue should only be sandwiched between the two pieces of leather and not visible. Hope that helps!
I have two USSR Ukrainian axes that need sheathes. Great vid.
I don't have an Ax. But if I did, this would be my sheath of choice.
won't the dye on the inside bleed onto the axe without any finish applied?
It shouldn't! Dye can sometimes rub off on clothing or skin but it shouldn't discolor the metal.
My idea was that I could make a sheath cheaper than buying one, but buying all those leather crafting tools isn’t going to work. Do you think I could make one for my splitting maul without breaking the bank? I just need something to cover the sharp blade edge when I’m just going to use the sledge hammer side. I didn’t realize how sharp it was, and then it cut my leg without any pressure behind it. It just barely grazed my leg and it cut the entire length of the blade and wouldn’t stop bleeding until I cleaned it and bandaged it up. Thanks for your help.
You should be able to make one without breaking the bank, some things like a straight edge and utility knife you may already have. The things you'll probably need to invest in would be, stitching chisels, needles and thread. Potentially a hole punch and snap setter if you're wanting to set a snap but there are alternate options you could use for a closure strap. Hope that helps!
Can I put blue shoe polish after the pro dye and before the Sheen?