It's a pity that there are no sound level meters on every channel. And the main level meter should not show headphones out but program out. That way I would always know if I have an overload even if my headphones are set quiet. So please consider adding level meters to every channel. That would make it so much easier to control and match sound levels to each other.
I sent the Yolobox team an email about optimizing the YBP to be used with the Rodecaster pro Audio Units.That allows for multi microphone podcasts and interviews.
I wanna do singing streams on tiktok or instagram with the Instream, I'm planning to buy it. Only thing holding me back is audio latency when monitoring. Because if I have guests on those livestreams I need to listen to them. But it could also mean that I'll be hearing myself when I talk because of monitoring. Is there an enable/disable function on monitoring my audio when plugging in my headphones so that I can only hear the in app audio like guests on instagram and tiktok?
Yes i have problem after 30 to 40 minutes the audio start cranking... it damage a few of my podcast already... so no i have to récord with my rode mixer as backup if the video is over 30 min
After greeting, I want to use yolobox pro in a press interview with my guest, for example, using 3 cameras, how do I act to get a good sound for everyone?? Thanks in advance
what is your recommendation when taking audio input from a church audio mixer into YoloBox pro to tuning audio quality and avoiding noises introduced by different signals?
Hi @eyuelgessesewolderufael4602 😊 Perhaps you could consider using a DI Box to improve audio quality. It can balance the signal output, eliminate ground loop noise, and ensure impedance matching between the mixer and YoloBox, while also protecting your equipment. Hope this helps!
When you are full screen you have your green screen background but when you go split screen side by side you have a different background. Is that a limitation of the yolobox or you not setting it up?
Hi Anyone having issues with the headphone? Seems to be a bug with the headphone. It doesn't detect the headphone until I restart the unit with the headphone plugged in. But when I take the headphone out and then plug it back it it wont work again or not detected.
I’ve watched a few of your shows now (enjoying them) not live so on the ‘re-run’ but it’s so frustrating when they jump! It feels like they have been edited but in a way that we miss information! What gives?
Hi @guillermotapia4801😊 Could you please provide me with more information about your audio mixer? All audio mixers work with the Pro. You just need to connect the audio mixer’s output to the Pro's Line In interface (it can also be other types of interfaces, depending on your audio mixer). Here is a tutorial video on using an audio mixer with the Pro, although the UA-camr only used one specific audio mixer: ua-cam.com/video/iG6toNGyZbw/v-deo.htmlsi=X1DAxnfmZbL3SN_M. Hope this helps!
Hi @guillermotapia4801 😊 I see. First, please ensure that the audio output settings on your QSC TouchMix mixer are correct. Then, connect the output port of the QSC TouchMix to the input port of the Steinberg UR22mkII using balanced XLR or TRS cables. Be sure to use balanced cables to minimize noise interference. Next, use a USB cable to connect the Steinberg UR22mkII to the USB interface of the YoloBox Pro. Open the YoloBox Pro and navigate to the control area of the audio mixer function, where you will see the audio input source from the Steinberg UR22mkII. Hope this helps!
It's a pity that there are no sound level meters on every channel. And the main level meter should not show headphones out but program out. That way I would always know if I have an overload even if my headphones are set quiet. So please consider adding level meters to every channel. That would make it so much easier to control and match sound levels to each other.
I sent the Yolobox team an email about optimizing the YBP to be used with the Rodecaster pro Audio Units.That allows for multi microphone podcasts and interviews.
I wanna do singing streams on tiktok or instagram with the Instream, I'm planning to buy it. Only thing holding me back is audio latency when monitoring. Because if I have guests on those livestreams I need to listen to them. But it could also mean that I'll be hearing myself when I talk because of monitoring. Is there an enable/disable function on monitoring my audio when plugging in my headphones so that I can only hear the in app audio like guests on instagram and tiktok?
Yes i have problem after 30 to 40 minutes the audio start cranking... it damage a few of my podcast already... so no i have to récord with my rode mixer as backup if the video is over 30 min
After greeting,
I want to use yolobox pro in a press interview with my guest, for example, using 3 cameras, how do I act to get a good sound for everyone?? Thanks in advance
what is your recommendation when taking audio input from a church audio mixer into YoloBox pro to tuning audio quality and avoiding noises introduced by different signals?
Hi @eyuelgessesewolderufael4602 😊 Perhaps you could consider using a DI Box to improve audio quality. It can balance the signal output, eliminate ground loop noise, and ensure impedance matching between the mixer and YoloBox, while also protecting your equipment. Hope this helps!
Can the original Yolobox mix audio from HDMI 1 with audio coming from USB-A?
There’s just a ton of air in the yolo with audio, how do you get ride of that?
When you are full screen you have your green screen background but when you go split screen side by side you have a different background. Is that a limitation of the yolobox or you not setting it up?
Hi, it's because I didn't use chroma key for the side-by-side source.
Why is the audio input jack not picking up, nor showing up on the mixer?
your amazing . thanks exactly whAT I NEEDED
Hi
Anyone having issues with the headphone? Seems to be a bug with the headphone. It doesn't detect the headphone until I restart the unit with the headphone plugged in. But when I take the headphone out and then plug it back it it wont work again or not detected.
Any luck with this ?
no, still not fixed. I think it requires a bug fix via firmware. waiting for an update.@@kenyontech
I’ve watched a few of your shows now (enjoying them) not live so on the ‘re-run’ but it’s so frustrating when they jump! It feels like they have been edited but in a way that we miss information!
What gives?
I have yolobox pro i want to use it for live streaming for live music on all platforms how can i connect my mixer have any tutorials?
Hi @guillermotapia4801😊 Could you please provide me with more information about your audio mixer? All audio mixers work with the Pro. You just need to connect the audio mixer’s output to the Pro's Line In interface (it can also be other types of interfaces, depending on your audio mixer). Here is a tutorial video on using an audio mixer with the Pro, although the UA-camr only used one specific audio mixer: ua-cam.com/video/iG6toNGyZbw/v-deo.htmlsi=X1DAxnfmZbL3SN_M. Hope this helps!
@@YoloLivTech
I have a qsc touchmix 16 channel digital mixer
I do have an interface aswell if needed its a steinberg ur22mkII
Hi @guillermotapia4801 😊 I see. First, please ensure that the audio output settings on your QSC TouchMix mixer are correct.
Then, connect the output port of the QSC TouchMix to the input port of the Steinberg UR22mkII using balanced XLR or TRS cables. Be sure to use balanced cables to minimize noise interference.
Next, use a USB cable to connect the Steinberg UR22mkII to the USB interface of the YoloBox Pro. Open the YoloBox Pro and navigate to the control area of the audio mixer function, where you will see the audio input source from the Steinberg UR22mkII. Hope this helps!
no