4 TON HEAT PUMP SYSTEM REPLACEMENT UPGRADE
Вставка
- Опубліковано 10 лип 2024
- 4 TON HEAT PUMP SYSTEM REPLACEMENT UPGRADE
merch = teespring.com/stores/steve-lav
/ stevenlavimoniere
lavimoniere productions llc
subscribe to my channel
/ @stevenlavimoniere
lavimoniereplumbingandheating.... - Навчання та стиль
"I'd rather jump off the flippin roof!" LOL Next Level Steve!
😂😂😂😂
Yes that Was funny I agree though 😄
"Wow! She must me a lookah then" 😂😂
Hey Steve not sure if you knew or not but there is a charge mode on those units. You hold the button on the board to force it into charge mode. I had a couple I accidentally over charged and discovered it.
“Common sense isn’t so common” 😂
Can’t believe steve installed a bosch inverter system 😱 wow lol
Was looking for the rheem/ruud lol..
Steve and Ms. Molly hvac 😂
@@th-wt5pn I found that the ones that don’t like them it’s for the reason they don’t understand them and don’t have the knowledge to successfully repair them…same goes for the similar GREE system
Nice install. The customer should be very happy.
Mikey pipes will be proud. He put in a Bosch.
... and for 1/2 of Mikeys pipes New York price.
Mikey Pipes likes smoking pipe
Found this channel because @mikepipes just put out a video about this
Steve you're the best!
Nice job Steve!! Congratulations on 200k subscribers 🎉
Big job. Excellent work as always, Steve.
We have installed a few Bosch units and so far they have been pretty good units.
Been running a 5 ton Bosch heat pump for over a year. It has been excellent!
Awesome install, Steve. Enjoy the installation process. Thank you.
Good job Steve as always
GREAT WORK STEVE! Thank you for sharing.
Great job Steve !!!!! as usual...
Nice job Steve as always happy 60th birthday Steve
Nice Work Steve!
Surprising they offer a PSC motor on current air handlers. First time I have seen a blower motor require a 20 uf cap. Man that duck work is awesome ! Lucky guy...
Goodmans have 20uf caps
The base model of Bosch as a PSC blower motor, the 18 and 20 have ECM.
@@dwight.bennett I have found the "base" models in most anything tend to be the best value because they have the exact foundation/design/engineering as the higher end models, just less features and parts to go bad. I've been finding this out more and more and it helps when determining the best value when selecting an item.
Great job Steve.......
Nice job Steve!! Congratulations on 200k subscribers
Excellent installation, nice heat pump base outside!
Another kick ass job Steve, the video was awesome and we can learn from it! Remain safe and keep them videos coming. ☝️✨️👍💥💢💯💫
another quality job done.
That was a hot job mama! Great work as usual.
Congratulations on 200 k subscribers
Congrats on a well-deserved 200,000 subs 👍🏽
Just starting video - looking forward to finishing. Thx Steve!
Very Nice New Install, Steve. 👍🙏
Looks good! Highly suggest a surge protector for those units. It’ll save you some headache for sure.
Nice professional job Steve!
nice work Steve, looks good
Great video,learned a lot,thanks!
Looks good, steve!
Carry a spray bottle with soapy water to cool down the joint and cleans up the joint. Also get a bottle of Laco Cool Gel to spray the king valves and evaporator connections before soldering to stop heat transfer, good stuff.
Great job Legend!👍🤘
Steven installing Bosch mama! Old Mikey Pipes fav. System install looks awesome Steven!
I thought Navien was Mikey's favorite! 😉
@@repro7780# deathboxincorporated 😂
Thank's steven
love your vogs 😀
Wow thats a NICE system!
Great job
Embrace the Technology Steve!!
Got a new Bosch 4 ton with matched air handler and new ductwork last week. House has been beautiful ever since - sitting at 72F while it's 90F+ outside. My electric usage also dropped since I stopped using the window units (after the old Lennox unit died) which pleasantly surprised me.
Wow that thing runs quiet. Great install.
DONT JUMP STEVIE I LOVE YOUR VIDEOS AND IM A PLUMBER
I dig these extensive installs. Busy busy
That has got to be pricey job.
Nice install
Your an HVAC entrepreneurial hero!
Holy smokes. Bosch..definitely good enough for this neighborhood
When I saw the Bosch I thought it was Mikey pipes
"It's Me! Mikey "Fuckin" Pipes!"
O Shit Steve hittin the Bosch!!!!! Zack Psioda and Ralph Wolf approved!
Them Bosch units are some real good stuff I do market refer in AZ an I’m gonna throw one on my roof in the fall for next season
I’ve heard great things about those Bosch units
You gotta put a surge protector on that disconnect, bosch requires it for warranty
guess thats a project for a day soon.
that bosh really looks like good equipment i have heard good things about them as well it will be interesting to see how well they hold up
A friend of mine has a Bosch 7yrs old last year A coil leaked this week inverter and board burned up so bad they had to replace the condenser unit. $7500 for repairs in 2yrs.
Steve, Certified Bosch Installer
Steve is the man go miss moly 😊
Never tried bosch. But i like the mini split fully ducted AHU unitd
Nice Bosch install! I have seen you installed a Goodman before due to a footprint issue for a Ruud
Bosch is awesome, pretty sure they’re based off of midea units, but hey, they’re great
Nice Bosch unit
Flippin made in china
GUNSLINGER FOR HIRE', thxs for sharing...
2.0 awesome Steve more electronics no you don't like that 😂 nice job Steve
Howdy Steve and Miss Molly
Not sure u charged that right , u need to put condenser into charge mode till it ramps up to 66 mhz , 6-8 degrees , when it’s out of charge mode it will read 15-16 degrees of sub cooling
That’s one high dollar disconnect switch mama
I had a Trane furnace and it only lasted 12 years. The heat exchanger developed a big crack (which I saw with my own eyes!) and then the motherboard went. At that point I decided to get rid of it.
Congratulations on 200k subscribers
Get the checkbook out
You will like the Bosch…check that amp draw after you finish and you will understand why
So Bosch is making HVAC too. Forever I just saw Bosch power tools. Checked out my sisters new kitchen on the 4th and she had a new Bosch range.
It's really made by intertek. which has been doing it for a long ass time.
You should have put the low voltage wire by air handler in conduit to keep the rodents from chewing on the wires
If it fits, it ships! The GODZILLA work truck
Don’t forget to install a surge protector on the power line to these units. A power surge will destroy the sensitive electronics in these heat pumps.
That outdoor Stainless Steel service disconnect cost more than the Bosch unit ... Must have fell of a truck ..LOL
mike pipes is starting s--t again, i like your work and your prices
Steve Lav still lives in Mikey Pipes head rent free
Techs should study how you deal with the public .
Hello Steve!
Hi Steve, great job!, however, how come you can't do the electrical work for the A/C units ?, seems that you have the expertise instead of having to hire an electrician and wait on them before you can finish the installation! In California, the HVAC guys/gals can get an electrical license to add to their HVAC license and do the electrical work as well
He's not licensed for it but I agree, if he knows how to and its not getting filed then he could. I bet he had to file the job though.
Liability would be the primary reason weather its a permit job or not. If your not licensed to do it and something happens the General Liability insurance gets pretty foggy. It isn't worth losing your insurance and nobody else will pick you up now your out if business to run 1 electric line. My younger years I did it all the time but things are different now
Steve’s working hard on this one. Changing out that train system for a Chinese Bosch.
What system do you like
IT'S D O A IM AFRAID
Ok Mikey Pipes could learn a thing or two 😂
Hey Steve I thought you didn’t use stabrite anymore?
We all knew Mikey was going to have something to say about Steve installing a Bosch.
There both good plumbers different ways of doing things but yea no need to be throwing jabs at steve
Ohhh, he soldered that thing
Hey Steve-- how many amps is that unit pulling?
Hey Steve and Miss Molly! Workin’ again ya’ll. 👍👍
It's me mf.. king Steve Lav.
Midea makes Bosch. They are very well built units.
Chinese
Intertek.
You can pull a Trane!
Same ppl that don't change engine oil & run them dry with no oil! Rich don't care they buy another one!
15 seer
Steve was that an inverter system?
It is.
@22:03 it's like a horror movie
Just curious why are the line sets brazed or soldered on central ac units but mini split systems use flare connections? Same pressures arent they?
@josephgraham1065 If brazing is not done properly with nitrogen flowing, you can get cupric oxide which is a black soot inside the lineset. Mini splits don't use filters like split systems and the soot can create issues with the metering valves etc on the mini splits. So they use flares. Also, the history overseas of mini splits was geared towards homeowners/ non professionals doing the installs and not having the equipment to braze properly led to use of flare fittings.
The ooold American Standard ya'll!!! She's a leaka mamma! 😅
The Tires Plus guys, fixed my front suspension today! I had a local guy replace a broken spring then springs(struts) in May, Turns out there were three nuts and bolts half on! He's right, I don't hear the clunking anymore! Good news day. 75 bucks!
Wow, that's great.
Manufactured in March, 2007
👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽
Nice Made in China sticker😬
Nothing but quality here
Good enough for this liberal neighbourhood.
Mikey douche pipes wears those Bosch shirts with American flag on it 🤦🏻♂️
Even the MassHoles can learn!