2014-2015 Silverado 1500 illuminated front grille bowtie
Вставка
- Опубліковано 26 сер 2024
- 2014-2015 Silverado 1500 illuminated front grille bowtie #84518367 install.
They have changed the model number to #84518367
This will fit the 2014-2015 Silverado 1500 and 2014-2019 Silverado 2500/3500
If you liked the video please Subscribe and let me know if you have any questions, have a great day!
Awesome because I've been waiting for them to make one for my 2014 model. Now I don't have to. Thank you sir!
I am happy to help! As long as you have a 14/15 it should work out great!
Where can i get it for my 2015 silverado 1500
Looks cool but I just looked up prices. Yikes! I can't fork over that kind of dough for that upgrade.
Could you upload a quick video of what it looks like at night ? Would you say the light color is blue or white?
I install the light a bowtie without removing the grills just by using my credit card sliding it on the corner of the bowtie and using a small driver by popping it out simple as that
I’ve been trying to find one for my 2014. Thanks for the video I just ordered it with the part number you provided. Do you know if they have one for the tailgate?
It should come with a matching black bow tie for the back! It is non illuminated though.
Do the headlights need to be on for the bow tie to illuminated or can the bow tie illuminated with just the parking lights on? Just asking because I also have anzo u bar headlights and I like turning on the u bars without the headlights.
I will check it with a volt meter later this week and to confirm it is hot with the running lights. It appears to be tied in with the ambient light sensor on the dash? The bowtie is really only noticeable when it is dark enough outside. Unlike the U-bars on the anzo's which are visible in the day time, you will not see the bowtie on during the day time as it is not bright enough to light up in the day time even though it is on. You can not see that it is on unless you block some of the light out. I will do another video showing this if that helps? Let me know if you have any other questions.
My kit did not come with that female end that gets attached to the black and white wires, and then attaches to the wire that attaches to the headlight harness. Is there a way to get one?
When you install it did it seem like you can take it apart? I want a color match The part that is not led
Will the illuminated bowtie turn on if you are only running the DRL's?
Where can I buy for the 2014
Can you tell me please the web where did you get those illuminated front grille bowtie
Miguel Rocha you can get them through any GM/ Chevy dealer or online through amazon and even eBay.
Did they ever made for a 99 Silverado 1500 .. that looks tight
For anyone wanting to do this the new part # is 84518367
Can anyone tell me were I can find a 03 led front bowtie badge
Did you have to do any customizing other than drilling the hole? do they come on when you turn off your main headlights and only turn on your fog lights?
Hi there, That is a good question! There were no other mods to make it work besides drilling the one hole in the grille. I have never looked to see if it works with out the headlights or fog lights. I never use my fogs so I know it has nothing to with them and I always have my headlights on auto. I will check tonight to see if it lights up with out the headlights on.
Ok thanks bro. Please let me know. Nice Mod.
DevilleHtwn illuminated emblem is wired in sequence with the low beams on the headlights. They will turn on with your auto headlights on or just running your low beams.
Where can i get the same bow tie to my 2015 silverado 1500
Just to clarify, if I wanted a gold one on a 2014 Silverado 1500 Z71 would I get #23306537? Thanks so much!
Eric Schwarzbach that is correct!
Alex Curtis thank you so much!
Why does that part number come back to a 2017 Chevy Silverado 2500 HD?
Correct, Chevy lists this part for the 2014-up HD 2500/3500's. This will also fit the 2014-'15 1500's as they are the same bow tie size. As you can see in the video it fits perfect and was plug and play on my 2015 1500 silverado. I can not confirm that it is plug and play on the 2014 1500 silverado but I do know that the bow tie will fit!
If you have a 2016-up 1500 silverado then you need part #84129741
Ok so I understand in your video you used a 2014-2017 emblem on a 2014-2015 Silverado. My question is do you know if i could get a 2014 illuminated emblem for a 2014 Silverado specifically? or i guess it wouldn't really matter...
if you have a k2 2014-2015 silverado 1500 like mine.. GM does not advertise a model number for this truck. They offer one for the 2014-2017 silverado HD 2500/3500 which is what I used. model #23385942 The Bowtie is the same size on the 2014-2017 HD 2500/3500 and 2014-2015 1500 trucks. If you have a 2016-2017 silverado 1500 then you need a different part #23385941
Are your low beams HID lights they don't look like yellow halogen.
blkinvestor when the video was made I was running a Morimoto elite HID kit for the low beams and Opt7 leds for the high beams. I have since taken off the aftermarket Anzo housing and put in OEM LTZ projector headlight housings with FX-R retrofitted projectors using HID for low and high beams.
Alex Curtis where did you get the headlights and those HID from
Hey Alex I have a Chevy Silverado 2015 LT and I would like to know if this part # 84129741 would fit . Because the dealership told me that’s the correct one and fits a 1500 and this other part #23385942 only fits a 2500/3500 truck. Can I use the #84129741 for my truck, I’m pretty sure it will fit my truck
Hi Ramiro Lopez, the part #84129741 will not fit a 2014-2015 1500. You will need part number #23385942 if your 2015 1500 Silverado has a a front end like mine.
Alex Curtis O I see okay well thanks. I will get back with you if I have any questions.
what is all that wiring on your fender wall the red wires that go into some yellow looking modules?
avery gentry those are load resistors for the led’s in my turn signals.
Can you show us how you install your hid I had trouble with mine
Sorry for the late response. I used this video for reference! ua-cam.com/video/fIgDZaZyfL0/v-deo.html
I now have the full Morimoto LED headlights.
I have the same truck were did u get the boetie?
I have a 2015 Chevy Silverado 1500 LT and I used the link you posted in the comments to order my bowtie and when it came in it didn't even come close to fitting as the holes and clips didn't line up and the illuminated bowtie wasn't close to the size of the original from my truck
Hi David that is strange! I am assuming they sent you the wrong part!
1) Are you sure you have the correct part#? Check the part number on the bowtie not the box. Maybe they shipped you a 2016-2017 bowtie instead which is a different size?
2) If it is the correct part Are you sure you have the right side up? There are hundreds of people like myself on the gm-trucks forum that have installed the same part number I have listed on their 2014-2015 silverados. Keep me updated and let me know if you need any help!
ok so it turns out that the part# that was sent is not the exact part number that you have listed and I called the dealership and they will be swapping my bowtie (part#84129741) for part# 23385942 thanks bud
It is always a bummer when something like that happens. I hope they send you the correct part asap. Let me know if you need any help!
Where do I get the part from. The # just sends me to your link. I need to order the emblem.
You can order it from any GM parts dealer. Apparently they changed the model number. It is now 84518367.
Where did you order the cable that connects to the headlight ? Do you have the part number for that
It comes with the bow tie. I’ll see if there is a part number for it
@@ajantics where did you order it ? Thanks for the reply
@@lorenzopalacios3640 no problem! I ordered it from a gm dealer on eBay. It was so long ago it doesn’t show up in my history anymore lol. My neighbor ordered his on amazon.
Will this fit in a 15 Tahoe LT? Thanks
I was looking in to this for my truck. It looks like Part: 23385942 was replaced by Part: 84518367. Would you happen to know if this new part number will work on a 2014 1500 4WD Crew Cab LT?
According to the gmpatrsdirect website part #84518367 this should work as long as you have 2014-2015 body style truck. They say it replaces the previous model numbers 23385942 & 84346586
will it fit a 2003 tahoe, of so where can i get one? I have been searchig for years.
I am not sure if it would fit the 2003 tahoe. I would pick up a used 2014-2015 silverado bowtie and see if that fits. If it does then fork out the money for the illuminated one!
@@ajantics Do you know if this is available for the 2015 tahoe LT if so where can I find it.
Is the led bright ?
The led only noticeable at night. It is in no way bright enough to when the sun is up. Once the sun is down it is very noticeable.
Do you happen to know if it will fit a 2016 chevy impala?
Yeah, that's a good question!!!!!! Patriots SUCK
Gm-parts does not list the Impala under this part #. The Silverado bow tie is much larger than the Impala so I am pretty sure this would not fit your application. They might have one available for it though? I know that the Camaro has an illumined bow tie option as well so I would check with your local gm parts dealer. Best of luck.
Hey i have a 2014 LTZ Z71 1500 would this fit it?
Hello there as long as it is the new to 2014 body style then yes it will. The new part # is 84518367
Anyone know if they make these fo 2008 201p vehicles
Do they make it with the gold bow tie
When GM announced the illuminated bowties they had a part number for a illuminated Gold bow tie on the 2016-2017 silverados part # 23306536 but it has never been produced and released to the public.
I have a 2014 high country Silverado that's pear white, will the product you installed in the video fit my truck
Yes it will fit and it "should be plug & play" like mine was. You will have to drill a small hole in the center of the grill for the bowtie harness to fit though which I mention @ 1:14 in the video
I'm also interested in the chevy gold bowtie. I found a chevy stock # 84129740. Is that the same of what you are talking about?
Hi there Jose Gutierrez, If you have a 2014-2015 silverado 1500 OR 2014-2017 HD 2500/3500 silverado and want the gold illuminated bowtie you will want item #23306537...... If you have a 2016-2018 silverado 1500 you will want #84129740
Very nice sir!.
I did this step by step and no go... instead I now have the driver side front and rear lights not working anymore... I took everything a part and restored everything to factory and still no lights.. any ideas what’s wrong? Pleaseeeee help
I have never heard of this happening before! This sounds like a connection issue since you have already went back to stock & are having the same symptoms. The first thing I would do is check head light connector and body harness connector. Make sure all the pins are tight/not bent/not damaged. After you check all the pins reconnect them and verify that they are on tight and lock in place. If you can pull the connector apart it is not locked in place. I hope that helps. If not I would recommend reaching out for help on this forum page. www.gm-trucks.com/forums/topic/193643-anyone-have-the-new-gm-illuminated-bowties/
Alex Curtis took it to the dealer.. turned out to be a tripped fuse.. what could have I done wrong during installation to cause a fuse to blow? Any ideas pleeeasseeee?
@@Arabic_strings18 I'm glad to hear it was just a tripped fuse. Did the dealer tell you which fuse was tripped? It sounds like the was a bad connection or bad wire somewhere.
1. If you go to install the bowtie again I would try disconnecting the battery before working on the wiring first.
2. Check the two pins that you have to lock into the connector that supply power to the illuminated bowtie are in correctly inserted and not loose.
3. Make sure every pin on the connectors are not broken or loose.
4. its unlikely that there would be anything wrong with the harness but I would check the illuminated bowtie wire harness for any splits or cracked wires.
5. Once you have all the connectors in plugged together, check to make sure they are locked in place and not loose.
6. reconnect power to your battery and see if it works then.
I am so sorry you are having this issue. This is the only time I have heard of this happening. I hope you update me with what you find and good luck!
Alex Curtis they let me exchange the bow tie because the said it is likely defective... will have sometime next week and post results...as far as the 2 pins- I feel there is where I struggled most... I just wasn’t sure if they were in right or not.. I didn’t realize the tripped fuse until I gave up and put everything back...so for all I know it was connected properly but something while doing th Econ tripped the fuse and it cause the bow tie to not light up....will keep you posted
Looks like I had a faulty one...got around to installing the new one today.. took 20 minutes not a single issue
will it fit on a 2007 2500 silverado?
From what I understand this will not fit as it is larger than the ones on 2007-2013
Did you but this off eBay
Austin SMITH yes I did but you can buy it from any GM dealer , Amazon or eBay.
@@ajantics awesome thanks for the fast reply
Where can I get it I got a 2015 LTZ and how much they cost?
Thanks in advance
You can get it from your dealer or online from various vendors. it is anywhere from $325 gm to $265 online.
www.ebay.com/itm/2017-GM-CHEVROLET-SILVERADO-HD-ILLUMINATED-FRONT-GRILLE-BOWTIE-KIT-23385942-/132004527703?hash=item1ebc153e57:g:anYAAOSwol5Yxue-&vxp=mtr
Alex Curtis thank u i found one for 200 I have a friend that works on a dealer and gave me a good discount
That is a great deal!!!! I hope you like the illuminated bowtie.
Alex Curtis do they make any for 2016 sierra
Adan Martinez unfortunately they do not make one for the GMC Sierra yet.
Any idea where I can get a bowtie like this for a 2013 Camaro? Can i just use this one?
Hi Jalen, I am do not think the one in this video will fit the front but I have heard that this one from Oracle will fit both the the rear of your camaro. www.rickscamaros.com/camaro-illuminated-bowtie-2010-2013-oracle.html
in that link someone mentions that it will work on the front as well. I would verify with them before ordering it though.
Where can I order the part?
I’m trying to find one for my 2012 silverado 1500 where do I find it?
According to GM, they only makes them for 2014 and newer. You can try Oracle lighting they might have something?
How much does one of these illuminated bow tie cost?
Looks like they are going for $280 now
The pins and connectors weren’t all put together. I’m having a hard time with the pins! What am I doing wrong? You didn’t even show that part
Check the video again at 1:53 I talk about it and show you where to put them. White wire goes to the plug labeled 1, Black cable goes the the plug labeled 2. The wires will only go in one way. Look at the plug where the wire slides into. the terminal on the wire only slides in one way. once you slide the terminal in the correct way it will snap and lock in place.
Alex Curtis yeah I’m having a hard time with the white locking tabs.
hmmm, try this video at 3:28 and see if that helps!
Alex Curtis omg I finally got it!! I knew I had the wires right. The locking mechanism wouldn’t let the pins go through far enough. My harness looks different from yours so maybe that’s the confusion. I have a 2016 blackout edition. Anyway I pulled the connectors apart and popped that white locking mechanism out. Taped everything all up after in black anyway. I did run the harness like you did though. Looks clean
This is exactly what I did. But the white locking mechanism was giving me grief.
ua-cam.com/video/5_MWXjJxPL8/v-deo.html
how do I install the plug with the black and white wire? The little rods go into the harness connector, but its like they dont go deep enough. so when i connect the two halves its not getting power. I may just by-pass it and maybe just splice the wires together.
the wire terminals will only go in one way. you will hear them click into place once in correctly. I believe that the flat part of the terminals were the bottom. www.dropbox.com/s/ow8md3cvfkamlv0/Illuminated%20Emblem%20Install.PDF?dl=0
yea, its wierd. I pushed them in until they couldnt go in anymore. Even looked inside to see how far in they went and saw both barely peaking out. but then when I connect it with the truck side its like its not making contact when i click the two harness pieces together. So to check i just stuck the two wires (black/white) directly into the truck side harness and it works... So im just not installing those wires correct somehow...
but white goes with purple and black goes with black of course right?
Man that is weird Ricky. I am sorry you are having that issue. Maybe the connector is faulty? You can always connect it how you did and just shrink wrap around it. or cut the off and ad your own quick release connectors.
im probably just going to do that if I cant make the connector work. Thanks man
Is there a gold version of the illuminated bow tie?
Yes there is a gold version, I do not know the model number though.
for 2014-2015 hd-2500/3500 & 1500 in gold is Part No. : 84518366
Thanks for the info also what type of head lights do u have
Hi Southern Fisherman, in the video I had Anzo U bar headlights installed.
Alex Curtis Thanks
will it fit on a 2015 lt chevy silverado 1500 2wd
Yes it will!
Hello all, I've been trying to find a light up GMC logo just like this one. White and looks professional for a 2017 HD GMC. Do any of you know where I can get one of had the link by chance. I've been looking for awhile now.
Hi there, I am not positive one is made for an GMC HD 2014-2018 but you could ask one of these companies? www.autoledtech.com/collections/led-emblem-logos/products/copy-of-illuminated-gmc-led-emblem-logo-rgb-flow-series
rgbhalokits.com/products/gmc-multicolor-led-emblem?variant=31249864392804
streetambitionz.com/products/led-logos-gmc-chevy?variant=15469636321338¤cy=USD&gclid=Cj0KCQjwg8n5BRCdARIsALxKb96EQjgN3XJjTvrdnpX60uFkddzZSRL1e4leP_fLI9WnbUTMSWp-_xAaAq6cEALw_wcB
@@ajantics Thank you
Where do you order it from
You can order directly from your dealer in the parts department or online. I ordered mine from ebay. www.ebay.com/itm/2017-GM-CHEVROLET-SILVERADO-HD-ILLUMINATED-FRONT-GRILLE-BOWTIE-KIT-23385942-/132004527703?hash=item1ebc153e57:g:TEMAAOSw5cNYK3VS&vxp=mtr
The part #23385942 comes with the front illuminated black bow tie and a black rear bow tie
I have a 2014 Silverado LT will it fit?
H W jr. as long as it's the same style as the 2014-2015 K2 silverado it will fit! Like the video mentions you will have to drill one small hole for the bow tie to fit. This is just for the wire stand off to fit.
where can I find one that will fit a 07 silverado 1500?
That is a good question. I am not aware of one for that year but you should hit up www.oraclelights.com and see if they have anything for you!
what kind of headlights you have?
Mark Montes In this video I had the Anzo “U bar” headlights model #111309 with morimoto Hid low beam and Opt7 led for high beam. Now I have my stock LTZ projector headlights with bi xenon FX-R retrofit projectors with Morimoto hid’s in high beam and morimoto leds In The high beams.
Do you know if it would fit a 15 Tahoe?
xx_xx / the bow tie is smaller on a tahoe so no it will not fit.
Ie their a multi color one ? Where can i buy this one ?
luis valdez as far as I know GM only makes the white color one in the video I have. I got mine off of eBay but you can buy it through any GM dealer and on most websites including amazon. Just google the part # and buy from where you choose.
Where did you buy the bowtie?
Hi Cristian, I got mine off of a GM dealer on Ebay but you can buy it from any GM dealer , Amazon or eBay
HI Alex,
I bought the bowtie from ebay. but i am haveing a hard time to install on the grill.
could you give some advice on this please?
Sure thing, what’s the issue?
Its really hard to fit on my grill, I have drilled a hold but the emblem doesn’t seems to fit
@@leonliu989 You might have to make the hole larger to fit. I had the same issue when I swapped my grill for a Z71 grill. I had to make the hole larger to fit the stand off from the emblem. Move up a size on the drill bit and see if that helps. Its okay if you make a larger hole as the emblem covers up everything! I hope that helps.
Alex Curtis Cool ，thanks for replying. I will keep you update
Hey Alex, is it cool, if i could get your contact and send you some photo about my emblem issues?
I wonder if I can make this work on my 2015 Tahoe
Alex will the bowtie fit a 2014 Silverado z71 LT? all the ones i find say 2016 and newer?
Roberto Pena if you have a k2 2014-2015 silverado 1500 like mine.. GM does not advertise a model number for this truck. They offer one for the 2014-2017 silverado HD 2500/3500 which is what I used. model #23385942 The Bowtie is the same size on the 2014-2017 HD 2500/3500 and 2014-2015 1500 trucks. If you have a 2016-2017 silverado 1500 then you need a different part #23385941
still the same on 2018's?
Mark Gonsalves yes the install would be the same but you would need the part number for a 2016-2018. If you have the “new” 2018/2019 1500 then I’m not able to verify it fits.
Alex Curtis I have the “old” body style truck 14-15 16-18. Thanks, gonna reference this when installing.
hey man where did u order that part i ordered the wrong one
Hi Aaron, I ordered mine from eBay. If you are looking for the same item I have it is model# 23385942
The seller was chevyebay@suburbanautogroup.com
hey thanks man
Where can i get one for a 2005 silverado
I am not aware of GM making one for the 2005 model.
Alex Curtis maybe they’re not making them but do you think it’ll fit cause i know they sell for the cruze but i think its to small
Advento Cano hmm I would grab a cheap used regular bow tie off of 2014-2018 and see fits your grille. If it does the next thing to figure out if if the headlight harness is the same in your truck. If not you would have to slice wires to make it work.
Alex Curtis do you think one from a cruze will fit
Where did you buy the illuminated light from?
I got mine from a seller on ebay but you buy it through any GM parts at a dealership or any of the online GM parts stores and amazon and ebay.
How to order
Shots by D Will You can order it through your dealer, Amazon, eBay or any GMparts dealer online.
Mine lasted two months…..got water inside and that was it….EXPENSIVE POS!
Wow! That’s crazy and I’m sorry to hear that. Mine is still going strong all these years later but I live in California where I don’t have weather extremes. It’s been in the snow/rain and 116° summers.
I live in South Florida….lots of rain, but they should be better sealed….very disappointed!
Part # for the wiring
Fasteddie's Racing956 I do not know the part number for the wiring but the wiring comes with the bowtie.
Alex Curtis where did you order yours ?
Because i may order it on gmdirectparts
I ordered mine from a vendor on eBay “suburbanautogroup” at the time it was only $225 shipped.
I have one for sale new if any one interested I'll take 220 and it's black and chrome
why so much, are they really $299, $250!?
DJ- -TA yeah there expensive I have one I'll let u have it for 200 brand new in box
Duc Ngo yes I got 2 brand new in box
What year is your truck ?
Duc Ngo this will fit perfect