Guts I never liked that guy, he always seemed like kind of a dick (I’m pretty sure there was even a point where he talked shit about Emgo, but then suspiciously started using “clearluscent” to refer to clear parts after Emgo started referring to them as “transclearant”) He does have one gem though, years ago he reviewed Generations Legends Animated Starscream and he absolutely rages about it. It’s super hilarious.
I have seen that review also, and they way he was picking on Actar was uncalled for. He pointed out maybe Actar transformed the MPM04 Optimus prime improperly and this made some parts do not tap in. And kinda suggests he should do the transformation a few more times before releasing a video, to me this comment is not constructive or friendly. Maybe he is just salty for not getting this early and let Actar gets all the view. After a while when everybody gets their figure, he quoted Emgo, saying He puts in a lot of time just to figure out how to transform OP into a coherent truck mode. And Optimbotimus picks on Actar again, saying some UA-camr really need to play the toy thoroughly before doing a review, where in fact the MPM04 does suffer from this issue and it is a widespread problem. I mean quoting one guy who have spent a whole afternoon just to transform a toy “properly” doesn’t mean others are wrong. Instead, it is Takara fault for releasing a figure that function inconsistently. Then Optimbotimus, enjoying others fruit of labour, transform OP “properly” and roasted Actar again...
neither can the flame toys transformers model kits but I'm not complaining because they look, feel and pose amazing except the attack mode primes they fall apart WAY too easy
@@LucanoGaming i know i have him and the idw megatron autobot version, the attack mode prime problem i saw first hand with my nemesis prime attack mode
I’m honestly a fan of non-transforming transformers every now and then because regular figures often compromise a lot on the robot mode, and I’m not one to switch my figures back and forth very often
Jobby: Y'know I can't help but feel like im forgetting something Jobby's fans: If you forgot it probably wasn't important Jobby: Your probably right Dancouga review: *Standing outside the soccer field in the rain*
How can someone say Jobby is a hack of a toy reviewer. Alright you tell me how your review watching experience is going with Minimal cuts, slow dragging on pacing and barely any rewatch value, we're just gonna be here enjoying fast paced yet informative and entertaining videos that I could honestly rewatch a ton. I ain't tryna suck up or anything, hell Jobby is far from the only reviewer I watch, but I'd be lying if I said he wasn't the one I look foward to seeing in the sub box most
The whole time I'm like "but his transformation is basically just pulling his arms back and sitting down... couldn't he just..." and then the absolute madman did it
Kaiyodo has always had poor quality control. Chipping paints when you move parts around, pegs and joints breaking when you move parts around. But they do have amazingly designed toys. And they usually have the most dynamic of poses.
I do recall commenting on one of his NECA TMNT figure reviews that I was gonna pass on them because I already had the Playmates ones and don't have the funds for the nicer ones (and thankfully did end up replacing those with the GameStop 1/4 scale NECA figures) and his reply to me was thinking I was saying that I was going to skip out on the nicer ones despite them looking better even though, as I said, my financial situation wasn't in my favor and they were $100 apiece
@Alexzander Busby Not always but there are times where he can be a bit questionable. Recently (like a couple months ago) he made a community post calling out PrimevsPrime for scamming him with a figure (that was possibly stolen based on some other videos I've seen on him) and not sending it to him whatsoever and it makes me wonder why he even tried to partake in that exchange
@Alexzander Busby Yeah, because I believe way back in the day he himself used to partake in the act of getting stolen warehouse figures to get reviews out early (or so I've heard) but he's since come to admit this indirectly and stopped doing so. Which is why I have to ask what made him consider taking part in a similar deal with PrimevsPrime
@@CayeDaws I dont mind baltmatrix, yeah he kinda rushes his reviews, but he doesn't seem like a guy who has his head up his arse all the time, unlike optibotimus.
@@lordherres9644 He was one of the pioneers of Transformers reviews back when the Bay movie toylines first started and has been making reviews since then, unlike some others who've since moved on or gone more off the radar
Actually I think Optibotimus' grudge against Jobby is because he contacted him about doing a collab at some point and Jobby didn't respond to it, I think I remember him mentioning it awhile back
I got this guy back when he came out, and I think he's really cool. It's nice to see some Yamaguchi super robots again. I personally only have two complaints with him. First is his angled bicep swivel, it makes his bicep grind against his shoulder pads if you don't swivel said shoulder pads out of the way. The second one is that I wish his back skirt flipped out. Granted he does get enough motion for really anything you'd want to do, but I'd be nice for the full backwards 90 degrees of swing. Oh yeah the skirts...as soon as I felt how tight those were, I immediately shock oiled them. Though my smokestacks are fine. He does feel less like a prestige piece, and more like a highly poseable toy. Man, I don't get where BBTS gets off charging $90 for this guy, though. Always buy your imports straight from Japan, people!
Get ready for lots of comments freaking out about a Transformer that can't transform, ignoring the fact that there is very much a market for super-articulated figures like these among collectors, and that dismissing it just because it doesn't transform is also ignoring what a well-sculpted, built and articulated figure it is
A real transformer toy that can actually transform has better painting and movement along with an accurate transformation. The last optimus prime toy he reviewm
I agree. In fact, I'd argue that getting rid of the transformation feature is an improvement. It allows for so much more posebility and sculpt options. I particularly like Flame Toys' model kits that have been out for a while. www.thechosenprime.com/thumbnail.asp?file=assets/images/other/flame%20toys/furai%20model/megatron%20idw%20autobot/ftfm-megatron-autobot-01.jpg&maxx=600&maxy=0
I agree I think cause they transform they are more expensive and they have kibble most of the time and sometimes it limits poseability and your only gonna display them in 1 mode I would rather get 2 non-transforming figures that are less expensive and they wouldnt have kibble or limited poseability and you could display both I think it would be a lot better
This review was amazing. Seeing the ups and downs of this figure let's me know what I would get myself into for a yamaguchi transformer. Seeing that beautiful ab crunch got me excited until seeing the problems. I got worried, but after seeing a crap tun of toy reviews sometimes of the same figure. I remember that even if it is the same toy or brand. They are all different and not perfect. Thank you for the review, jobbythehong. #backlivesmatter
Okay... I also broke the hip skirt. After raging for about 5 minutes ($120 figure!!!!) But after that I decided to just remove the other skirt as well. It looks fine and allows the legs more room to move. So, if you in the comments get this figure, my advice is to pop off the front skirts so you don’t get discouraged when they almost inevitably snap.
I've built a few of the flame toys model kits, and they're not that bad. though you do need to do quite a bit of sanding on some connecting pieces. i've already had splitting in the leg on the soft plastic
If your wanting a way to potentially fix that skirting joint you can always try pinning it and then super gluing it? As in using a pin vice to screw in, putting a bit of paper clip into the new hole and then try using glue?
"Non-transformable Transformer figures are pointless!" A necessary sacrifice to bring articulation and accessories to this figure. 2:24 I somehow knew Jobby would mention Optibotimus' comment sooner or later.
Also if you want a solution on how to get that ball joint out of the socket, I recommend you use some tweezers, and one of those toe nail nippers, to CAREFULLY pull it out
for the skirt issue : try drilling a hole in both sides and fixing it with a metal rod , propably not perfect but beats having a broken figure that will always look broken
@@Greyhoundsniper So it receded too far in the socket that no rod or stick like object with epoxy can pull it out? So drilling it is the best option. Also I don't know if I heard this correctly but some epoxy can damage the paint? I don't know much about figure collection hobby but still find these types of problem bothersome; so I'm always in the look out for solution as they a found a way in helping in my job when I am dealing with tiny parts. Thanks for the reply.
@@Greyhoundsniper Thank you. This is the type of info I am looking for. When I have the time I will look at this brand and see if it may come handy on those rare occasion at work. Plus one of my siblings is getting a growing interest at collecting this type of figures. So stocking up on proper epoxy for if a incident happens because they were a little too rough with the figure; we may be able to fix it. I remember the days when I was playing with my bargain toy too roughly and having no idea on how to fix them when they broke. Man that sucks.
Optimus: _"Who will join me? Who will give up the power to transform, to become stronger, faster, more alive?"_ Jobby: (wordlessly contorts Optimus into an alt-mode in pure denial and rejection of what Optimus did to himself.) Optimus: **dies* _(for the upteenth time)_ *screaming**
Well if you started to accept nontransforming transformers it's only downhill from there- ehem Flame toys Seriously though they're worth every penny but you have to be stupid rich to collect them regularly
I always wanted transformers figures that don’t transform!!!! Like focus solely in the robot mode, make it look awesome and posable without beeing dragged down designwise by a transforming action that you use like two times before sitting it in the shelf. A dream come true!
Would Jobby ever consider reviewing Monster Hunter World figures? That would be wild to see, I love him so much since he always manages to make me smile even if I had a hard day
It makes more sense to have a non transforming figure than those masterpieces you reviewed that have fake parts hiding away and be replaced in vehicle/animal mode. If the transformation is fake then the only reason for it to be there is to make kibble.
Ask Toy Polloi about tips on fixing your action figure and reinforcing the ball joints that you feel are too weak for the tension involved in using them. As an aside tip, I used liquid soap to lubricate a transformers figure that I felt was too soft in the plastic ball joints, and it saved me the pain of seeing it break due to the tightness. Still had to move the joint with the soap inside until it smoothed out, but damn if it wasn't worth it. XD May this message find you in good health, and may we keep on enjoying your shenanigans as you review - it is, after all, a work of love and it shows. ;)
revoltech makes some interesting joint design choices, especially figures designed by yamaguchi, like the revoltech yamaguchi mazinkaiser which just uses two swivels for the shoulders and biceps.
I ended up using 2 thumb tacks to fix my buddies. Same issue as yours. If you don't get it replaced. One thumb tack on the inside of the leg, and one on the outside and it will slowly pop out. Hot water couldn't hurt. Super glued once out using zap a gap and it is working just fine now. Surprisingly didn't happen on my copy.
Did the ball joints for the skirt is stuck inside the socket? Can you not take it out by finding a rod with the same diameter as the neck of the ball joints and use an epoxy like J-B Weld to fuse the rod and ball socket together. Let it cure then pull it out. Is this viable solution?
![BATMAN Double Review! [MAFEX The New Batman Adventures + Revoltech Arkham Knight]](http://i.ytimg.com/vi/CVD8qBiGgsI/mqdefault.jpg)
It's like buying a lego set but the pieces don't connect
some random guy more like prebuilt that was superglued
Quoc-Nam Nguyen so a Barbie Playset?
some random guy megablocks..
*-_Batman _-* megablox*
@@OttoGraff-fu8pj **mega constructs* ( seriously that's what they are called now.)
LMAO!!! That “transformation”! Great vid!
Hey Jobby, I love you. But then the collecting community hates me too, so . . .
ShartimusPrime oh well at least your not optibotimus, what a dick. I can see why he’s channel hasn’t grown all that much.
Jeje Zubbes 420 What he do?
@@jejezubbes4208 yea what he do
@@jejezubbes4208 yeah wut did he do
@@jejezubbes4208 what did he do?
“That is kind of a high asking price.”
I mean hey, at least it’s not $500
$500 *$500* I gotta say it every time I find something wrong with the figure
He didn’t half to lose a kidney this time
Nekrumorfiini1 The price went down by $410 by not giving it the ability to transform. If anything, it’s a blessing lol
But it doesn't transform
Yeah MP-44 is bordering Hassan unicron*please review if you get it I expect you not to
Jobby makes bad meme
Everyone: hey that's pretty good
Jobby: makes a meme
All of his fans: this comment section can fit so many dead memes in it
Its free real estate
luxraydarkrai *we stray further from god everyday*
LMAO
Jobby haters: Buuuuuuut Jooooobbbyyyy!!!!!!!!
Hip skirt: *breaks*
Jobby: “I fear the wounds are ... fatal”
@Spider Nerd Shit meme.
@Mando Lorian Shit meme.
@@LarryLongBalls Like you?
@@Railenisaplanenerd Wow bro you sure got me good. You took me the fuck down. You basically fucking destroyed me. Holy shit bro. You got me good.
@@Railenisaplanenerd I missed the part where that's his problem
Optibotimus is kinda a jerk. He does question other reviewers like Actar.
“You didn’t transform it properly.”
Guts I never liked that guy, he always seemed like kind of a dick (I’m pretty sure there was even a point where he talked shit about Emgo, but then suspiciously started using “clearluscent” to refer to clear parts after Emgo started referring to them as “transclearant”)
He does have one gem though, years ago he reviewed Generations Legends Animated Starscream and he absolutely rages about it. It’s super hilarious.
@@snipetysniper and the Times his cat pops up for a review
I always hear people calling him a jerk but I haven’t seen evidence till now.
I have seen that review also, and they way he was picking on Actar was uncalled for. He pointed out maybe Actar transformed the MPM04 Optimus prime improperly and this made some parts do not tap in. And kinda suggests he should do the transformation a few more times before releasing a video, to me this comment is not constructive or friendly. Maybe he is just salty for not getting this early and let Actar gets all the view. After a while when everybody gets their figure, he quoted Emgo, saying He puts in a lot of time just to figure out how to transform OP into a coherent truck mode. And Optimbotimus picks on Actar again, saying some UA-camr really need to play the toy thoroughly before doing a review, where in fact the MPM04 does suffer from this issue and it is a widespread problem. I mean quoting one guy who have spent a whole afternoon just to transform a toy “properly” doesn’t mean others are wrong. Instead, it is Takara fault for releasing a figure that function inconsistently. Then Optimbotimus, enjoying others fruit of labour, transform OP “properly” and roasted Actar again...
What can you expect from a boomer man-child?
"Can't transform"
Oh so it's a really expensive Action Master?
Except action masters suck!
Heck ! Action masters more garbage LEGO dulplo
It even has a really stretched anatomy like an actionmaster
10:06 The last 12 seconds are up there with the most ominous things Jobby's ever produced. Hands down.
Me: "Any transformers figure is a good transformers figure to me!."
Jobby: "It doesn't transform."
Me: *It's time for a crusade*
neither can the flame toys transformers model kits but I'm not complaining because they look, feel and pose amazing except the attack mode primes they fall apart WAY too easy
@@shadowbladezorru2748 *Lowers blade* "Go on."
@@shadowbladezorru2748 IDW Optimus is absolutely amazing tho.
@@LucanoGaming i know i have him and the idw megatron autobot version, the attack mode prime problem i saw first hand with my nemesis prime attack mode
what about 3A/ThreeZero?
He's not a transformers figure. He's a figure of Optimus Prime, the character from the transformers
Well he is from Transformers so technically he is a Transformers figure.
INSERTGODZILLANAMEHERE 1 r/Wooooooooosh
No shit Sherlock
Ummmmm how old are you
@@tjgamie1711 Stfu.
I’m honestly a fan of non-transforming transformers every now and then because regular figures often compromise a lot on the robot mode, and I’m not one to switch my figures back and forth very often
I know no-one would care but this was released on my birthday and this was a great birthday present from slobby the ding dong.
Slobby The Ding Dong
Nice
floppy the ding dong
Jobby: Y'know I can't help but feel like im forgetting something
Jobby's fans: If you forgot it probably wasn't important
Jobby: Your probably right
Dancouga review: *Standing outside the soccer field in the rain*
I asked him about it at a AMA on twitter and, to be fair, he said the ETA on that one is early-December.
So glad I’m not the only one waiting
At least Baltmatrix doesn’t hate you, Jobby.
And i think PrimevsPrime doesn't hate him too
Shartimusprime: am i a joke to yoi
Mr. Lazy Eyebrow made a swivel reference.
@@sharp79377937 Also he made a joke saying ur really pushing for figures backs to look better and good on ya for it
@@YTLadiesman217 wut video
I love it when Jobby mocks all the whiney plebs in that hilarious troll voice 1:50
Doctor Algy that was kinda unnecessary
That party had me crying the first time I watched it
How can someone say Jobby is a hack of a toy reviewer. Alright you tell me how your review watching experience is going with Minimal cuts, slow dragging on pacing and barely any rewatch value, we're just gonna be here enjoying fast paced yet informative and entertaining videos that I could honestly rewatch a ton.
I ain't tryna suck up or anything, hell Jobby is far from the only reviewer I watch, but I'd be lying if I said he wasn't the one I look foward to seeing in the sub box most
The whole time I'm like "but his transformation is basically just pulling his arms back and sitting down... couldn't he just..."
and then the absolute madman did it
Kaiyodo has always had poor quality control. Chipping paints when you move parts around, pegs and joints breaking when you move parts around. But they do have amazingly designed toys. And they usually have the most dynamic of poses.
"Megatron pounding hands" Is actually Optimus doing a sledgehammer, just not overhead.
Nah 🅱️ it's heaven and hell
"uHm BUt jObBy ÆAe Aee3æ iTs nOt CAlLeD tHe pOuNdiNg mEgATrOn hAND ÆÆÆÆÆÆÆ!1!1!1!1!1!1!1!1!1!1!1!1!1!1!11?1?1?1?"
Optibotimus takes a lot of his comments as insults. A lot of his responses are very passive-aggressive.
I do recall commenting on one of his NECA TMNT figure reviews that I was gonna pass on them because I already had the Playmates ones and don't have the funds for the nicer ones (and thankfully did end up replacing those with the GameStop 1/4 scale NECA figures) and his reply to me was thinking I was saying that I was going to skip out on the nicer ones despite them looking better even though, as I said, my financial situation wasn't in my favor and they were $100 apiece
He’s like the transformers version of yandere dev
@Alexzander Busby Not always but there are times where he can be a bit questionable. Recently (like a couple months ago) he made a community post calling out PrimevsPrime for scamming him with a figure (that was possibly stolen based on some other videos I've seen on him) and not sending it to him whatsoever and it makes me wonder why he even tried to partake in that exchange
@Alexzander Busby Yeah, because I believe way back in the day he himself used to partake in the act of getting stolen warehouse figures to get reviews out early (or so I've heard) but he's since come to admit this indirectly and stopped doing so. Which is why I have to ask what made him consider taking part in a similar deal with PrimevsPrime
@Alexzander Busby I've no clue honestly. But it wouldn't surprise me if pirated figured were that way
Jobby: "not into non transformable TF toys anymore."
KuroKaraKuri Star Saber: *exist
2:12 : happens
COPPA: YOU DIDNT MARK THIS AS 4KIDS. $4200 FINE.
Tramsformer that doesn't transform.
Church: Wait that's illegal.
Revoltech figure that doesn't have revolver joints.
Church: *BLASPHEME!*
Optibotimus is just pissed cos no one watches him anymore lol
Him and balmatrix. It's not ftc that's killing them.
@@CayeDaws I dont mind baltmatrix, yeah he kinda rushes his reviews, but he doesn't seem like a guy who has his head up his arse all the time, unlike optibotimus.
Who is optibotimus?
@@lordherres9644 He was one of the pioneers of Transformers reviews back when the Bay movie toylines first started and has been making reviews since then, unlike some others who've since moved on or gone more off the radar
Actually I think Optibotimus' grudge against Jobby is because he contacted him about doing a collab at some point and Jobby didn't respond to it, I think I remember him mentioning it awhile back
Only OG fans will remember..
MonikaGodzillaPrime
Yeah..... the good old times.
I feel a wooosh may happen.
👌
Dude thats every video
And only REAL OG remember that it's MadokaGodzillaPrime.
I got this guy back when he came out, and I think he's really cool. It's nice to see some Yamaguchi super robots again. I personally only have two complaints with him. First is his angled bicep swivel, it makes his bicep grind against his shoulder pads if you don't swivel said shoulder pads out of the way. The second one is that I wish his back skirt flipped out. Granted he does get enough motion for really anything you'd want to do, but I'd be nice for the full backwards 90 degrees of swing.
Oh yeah the skirts...as soon as I felt how tight those were, I immediately shock oiled them. Though my smokestacks are fine. He does feel less like a prestige piece, and more like a highly poseable toy. Man, I don't get where BBTS gets off charging $90 for this guy, though. Always buy your imports straight from Japan, people!
Jobby: "No wonder the toy review community hates me."
The Community: Subscribes to Jobby2 instead.
Jobby: Thank you my Lord.
Roses are red, life has no meaning, the voices in my head are constantly screaming
"Cant Transform "
Me:"Is that even legal "???
You're everywhere
Revlotech: I will make it legal
Have you seem those movie statues. You know. The super detailed non transforming statues ?
I will make it illegal
Transformen't
1:41 and 2:12 the first appearance of the modern "BUT JOBBY!!"
Get ready for lots of comments freaking out about a Transformer that can't transform, ignoring the fact that there is very much a market for super-articulated figures like these among collectors, and that dismissing it just because it doesn't transform is also ignoring what a well-sculpted, built and articulated figure it is
Hi im savvy youtube commenter who is ahead of the curb
A real transformer toy that can actually transform has better painting and movement along with an accurate transformation. The last optimus prime toy he reviewm
I mean, action masters were a thing
I agree. In fact, I'd argue that getting rid of the transformation feature is an improvement. It allows for so much more posebility and sculpt options. I particularly like Flame Toys' model kits that have been out for a while.
www.thechosenprime.com/thumbnail.asp?file=assets/images/other/flame%20toys/furai%20model/megatron%20idw%20autobot/ftfm-megatron-autobot-01.jpg&maxx=600&maxy=0
We ain't it bruv
**links to giveaway**
Me: oh boy!
**link leads to dead page**
2:25 Damnnn dude that's Optibotimus saying that
Yeah, I was surprised. I hope he was joking because it comes across as salty.
@@TFanPage101Hello there
I actually really love the “bUT JoBbY” moments 1:41
Jobby: “Swivel here”
Me: he said the thing
7:54 Jobby: and HERE we have...
One of those small line cyberverse toys (lordy, that series deserves better)
That transformation sequence was amazing!
2:08 I wanted a replay button.
It's like Swivel Man without Jobby actor as the actor.
XD that transformation killed me! Dude don’t worry about the “community” your vids are great and that’s why we’re sticking with you for the long haul!
Hot Take: Transformer figures that don't transform are perfectly valid, you guys are just mean
Hot take: putting hot take in front of your opinions doesn't make them any more valid
I agree I think cause they transform they are more expensive and they have kibble most of the time and sometimes it limits poseability and your only gonna display them in 1 mode I would rather get 2 non-transforming figures that are less expensive and they wouldnt have kibble or limited poseability and you could display both I think it would be a lot better
Yea, the reaction line looks nice
RNGaming Js except your point is entirely invalidated by the fact that this thing is 80 dollars
@@jagtech490 It was 89.99 which is actually 90 dollars which is even crazier
Jobby: he cant transform
Me: well if he cant transform he aint a "transformer" so he's a jeager now?
*Pacific rim theme intensifies*
A jeager is piloted.
This is just a robot.
@@sebastienvondoom8615 yeah i wonder what should we call it hmmmmm
Jeez might aswell be an unpiloted gundam wait did i just say GUNDAM
MORE GUNDAM!!!!
@@sebastienvondoom8615 Also, pretty sure that Diaclone involved people piloting the robots.
He could be one of those robots from real steel?
What about the action masters?
Laughed so hard to that transformation
1:41 my favourite “BUT JOBBY”
Actually seeing this makes me wanna see Bandai team up with takara to make a robot damashii style figure of optimus prime now 😀😀😀
I love how he started with the transformation sequence
6:57
“Sorry Megatron, you know I had to do it to em”
“why throw away your life so recklessly?”
“Sorry Megatron, you know i had to do it to em”
This review was amazing.
Seeing the ups and downs of this figure let's me know what I would get myself into for a yamaguchi transformer. Seeing that beautiful ab crunch got me excited until seeing the problems. I got worried, but after seeing a crap tun of toy reviews sometimes of the same figure. I remember that even if it is the same toy or brand. They are all different and not perfect. Thank you for the review, jobbythehong.
#backlivesmatter
"Abomination against God"
Aww man your flattering me
Okay... I also broke the hip skirt. After raging for about 5 minutes ($120 figure!!!!) But after that I decided to just remove the other skirt as well. It looks fine and allows the legs more room to move.
So, if you in the comments get this figure, my advice is to pop off the front skirts so you don’t get discouraged when they almost inevitably snap.
8:04 the king is here everybody
1:41
BUT JOBBY!!! Your memes are the best dude they make me laugh my ass off
Amazing Yamaguchi: "Do you guys not have regular transformers?"
Me: *Okay TransBoomer*
I've built a few of the flame toys model kits, and they're not that bad. though you do need to do quite a bit of sanding on some connecting pieces. i've already had splitting in the leg on the soft plastic
I can understand the feeling of bloodlust over a missing part. Almost caused armageddon because of it. Totally understandable
How could you not like jobbys memes there godly
6:37 VIBE CHECK
If your wanting a way to potentially fix that skirting joint you can always try pinning it and then super gluing it? As in using a pin vice to screw in, putting a bit of paper clip into the new hole and then try using glue?
“If that arm doesn’t show up by the time I review the figure: I will kill you”
#jobbyslifematters
That's clearly the best truck mode out of any Optimus Prime figure I've never seen.
"Non-transformable Transformer figures are pointless!"
A necessary sacrifice to bring articulation and accessories to this figure.
2:24 I somehow knew Jobby would mention Optibotimus' comment sooner or later.
The salt is unbelievable
Paul’s ego is so bad he can’t even deal with Jobby being better than him.
A transformers figure that doesn't transform is like watching jobbythehong but with no depression jokes
6:58 HELL AND HEAVEN!
Also if you want a solution on how to get that ball joint out of the socket, I recommend you use some tweezers, and one of those toe nail nippers, to CAREFULLY pull it out
for the skirt issue : try drilling a hole in both sides and fixing it with a metal rod , propably not perfect but beats having a broken figure that will always look broken
I don't get what happened? When the skirt broke did ball joints got stuck in the socket? Can't you epoxy something to it then pull it out?
@@DarkDraconX1 if the ball joints peg didn't break so far in it could've worked but that's the only way he can fix it
@@Greyhoundsniper So it receded too far in the socket that no rod or stick like object with epoxy can pull it out? So drilling it is the best option. Also I don't know if I heard this correctly but some epoxy can damage the paint? I don't know much about figure collection hobby but still find these types of problem bothersome; so I'm always in the look out for solution as they a found a way in helping in my job when I am dealing with tiny parts. Thanks for the reply.
@@DarkDraconX1 yeah of anything don't use normal epoxy, for figures or model kits I'd recommend using modelers epoxy or putty (like Tamiya or Mr.hobby
@@Greyhoundsniper Thank you. This is the type of info I am looking for. When I have the time I will look at this brand and see if it may come handy on those rare occasion at work. Plus one of my siblings is getting a growing interest at collecting this type of figures. So stocking up on proper epoxy for if a incident happens because they were a little too rough with the figure; we may be able to fix it. I remember the days when I was playing with my bargain toy too roughly and having no idea on how to fix them when they broke. Man that sucks.
Optimus: _"Who will join me? Who will give up the power to transform, to become stronger, faster, more alive?"_
Jobby: (wordlessly contorts Optimus into an alt-mode in pure denial and rejection of what Optimus did to himself.)
Optimus: **dies* _(for the upteenth time)_ *screaming**
0:32 me when predator hunting grounds is *ONLY* going to be on ps4 and not xbox one
"optimus' death theme" just as the skirt breaks haha 😄
Well if you started to accept nontransforming transformers it's only downhill from there- ehem Flame toys
Seriously though they're worth every penny but you have to be stupid rich to collect them regularly
Optimus DOENST transform...
Zaku: *Offers a hug*
I tried the link to Gemr. It said the page was non - existent.
Just like myself
4/10 IGN
Gottem
I always wanted transformers figures that don’t transform!!!!
Like focus solely in the robot mode, make it look awesome and posable without beeing dragged down designwise by a transforming action that you use like two times before sitting it in the shelf. A dream come true!
7:46 OR I MY!!!
I still have my old Revoltech G1 Convoy and i'm so glad I bought it. I'm surprised Kaiyodo released another Revoltech Optimus figure!
Who thought it was a good idea to make a transformer which can't transform.
No one
Mattel
the same people at flame toys who made transformers as non transforming model kits
Every Action Master figure ever: Are we jokes to you?
Evil people
GODAMMIT JOBBY YOU COULD MAKE A HEAVEN AND HELL REFERENCE WITH THE TWO FIST !
Did you ever watch my hero academia?
Would Jobby ever consider reviewing Monster Hunter World figures? That would be wild to see, I love him so much since he always manages to make me smile even if I had a hard day
When you die in the series before you get merch of you:
Swivel Man: *deformed Po*
The link to sign up to enter the give away doesn't seem to be working ^^;
2:25 classic salty Optibotimus
Why is everyone trashing on optibotimus
Pretty ironic optibotimus called you a hack
It makes more sense to have a non transforming figure than those masterpieces you reviewed that have fake parts hiding away and be replaced in vehicle/animal mode. If the transformation is fake then the only reason for it to be there is to make kibble.
Ask Toy Polloi about tips on fixing your action figure and reinforcing the ball joints that you feel are too weak for the tension involved in using them.
As an aside tip, I used liquid soap to lubricate a transformers figure that I felt was too soft in the plastic ball joints, and it saved me the pain of seeing it break due to the tightness. Still had to move the joint with the soap inside until it smoothed out, but damn if it wasn't worth it. XD
May this message find you in good health, and may we keep on enjoying your shenanigans as you review - it is, after all, a work of love and it shows. ;)
*_0:26_**_ I don't like N******~_*
The transformation part cracked me up. Pure comedy.
"A Transformers figure that can't transform"
Me: Wait that's illegal
No. Its an ACTION MASTER
Transformen't
revoltech makes some interesting joint design choices, especially figures designed by yamaguchi, like the revoltech yamaguchi mazinkaiser which just uses two swivels for the shoulders and biceps.
Imma tell my grandkids that this is Filthy Frank.
Jobby will eventually realize theres a Optimus model kit and the gundam ghost will have his dayyyy
I know that a Transformers figure that doesn’t transform is complete heresy, but at least it’s not an Action Master.
But if you think about it, it's an action master
Jobby:i have no room in my heart for non-transforming transformer
Me:do you remember the gladius
Well, thats just prime.
Jobby on prime's MP-44 backpack have you seen his comic version its the MP-44.
Optibotimus hating on Jobby’s success😗
That transformation is epic.
I consider revoltechs as pose figures. replicas of hand sculpt figures that have added articulation points for posing.
Jobby: "I produce bad and annoying memes."
Internet: Bans all the memes.
Jobby: Thank you my Lord.
I ended up using 2 thumb tacks to fix my buddies. Same issue as yours. If you don't get it replaced. One thumb tack on the inside of the leg, and one on the outside and it will slowly pop out. Hot water couldn't hurt. Super glued once out using zap a gap and it is working just fine now.
Surprisingly didn't happen on my copy.
Scratch that. Literally just broke it on mine... ugh.
Did the ball joints for the skirt is stuck inside the socket? Can you not take it out by finding a rod with the same diameter as the neck of the ball joints and use an epoxy like J-B Weld to fuse the rod and ball socket together. Let it cure then pull it out. Is this viable solution?