@@Teslaundmehr ⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran
sorry, why the antenna in new project is between capacitor and first coil? It's not better after coil (beetween coil and ground)? I think that could be increase more the voltage.
Something is missing from the schematic. the collector is connected to the battery + side and the emitter to the Batt Negative. cannot work. you need an inductor between the Batt plus and the collector.
it's not wrong, I tied today, and somehow it worked, but here is a hint, if you put a capacitor near the transistor supply, it stop oscillating, and this suggest that it's using the wire itself as inductor, but I still don't get how the high voltage is generated from the primary to the secondary.... even seeing with my eyes ... i can only accept
There might be a benefit to using a POWER Field Effect Transistor. They are very tough and have a very low *ON* resistance. Try driving it between cut-off and saturation. Such transistors require to be driven from low impedance, and a suitable driver IC should be used.
Its works well with 12v 2amp input. Good job bro, Can this coil only lights up only cfl bulbs, can it light any old glass based neon,krypton or argon gas filled 2 5v torch bulb ? Can you make a try with your readily available new updated version of jammer? Eagerly waiting for your reply
Hello I wish that you make a project emp with a NE555 Chip and multiple blink speed modes? I have seen some similar videos but your videos are much easier to understand. 🙂
Hi bro, it is an amazing video But, what you do not explain the circuit who it work, like what is the benefit of the capacitor between collector and emitter
To create a REALLY EFFECTIVE military grade JAMMER we should join forces... My mechanical amplifiers combined with your electronic wizardry.... Think about it! Also Michael Reeves with his code writing skills and we could create a MECH or a ROBOT which would go around the city at night jamming and blockbusting whole suburbs - - - nothing working as long as our robot would be jamming...
Why do you think your 12V tesla coil circuit makes the biggest arcs on youtube for that input voltage? Is it the coupling between primary and secondary? I'm so curious because I'm planning to build a tesla coil gun soon too!
You can put one inside an up-side fish bowl and on the outside, glue a bunch of CFL bulbs that stopped working because of the blown electronics inside them, and people will wonder how the heck are the bulbs lighting up when there are no wires going to the bulbs! I bet we'll see some head scratching! Record the video of them all confused, and upload so we can all laugh.
Parametric resonance between two tank circuits where the earth is the standing wave inductor of the first resonant circuit, and the air is the capacitor of the second resonant circuit. The second tank circuit has half of the resonant frequency of the first tank circuit, where the earth is a standing wave inductor. Two towers are requires for parametric coupling.
Hey! also hier geht das: www.patreon.com/user?u=45443829&fan_landing=true Da kann man auch zum Beispiel mit Lastschrift machen. Sonst auch direkt per Überweisung ;) Danke dir :) Beste Grüße!
Reminds me of a young Swarzqaneggar, with huge brain instead of huge muscle.
Haha, you made my day!
@@Teslaundmehr ⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
I'm a big fan of all the macro shots on this one Leon! Cool project.
Thank you Jay, Im glad that you liked it!
Wow! I'm a so impressed with the quality of your shooting your videos and your soundtracks are amazing! Beautiful if i say so.
This will be very interesting, and, teslaundmehr, keep up the good work!
Thank you!!
@@Teslaundmehr You are quite welcome
I like the old one because it can create nice arcs
sorry, why the antenna in new project is between capacitor and first coil? It's not better after coil (beetween coil and ground)? I think that could be increase more the voltage.
Something is missing from the schematic. the collector is connected to the battery + side and the emitter to the Batt Negative. cannot work. you need an inductor between the Batt plus and the collector.
it's not wrong, I tied today, and somehow it worked, but here is a hint, if you put a capacitor near the transistor supply, it stop oscillating, and this suggest that it's using the wire itself as inductor, but I still don't get how the high voltage is generated from the primary to the secondary.... even seeing with my eyes ... i can only accept
There might be a benefit to using a POWER Field Effect Transistor. They are very tough and have a very low *ON* resistance. Try driving it between cut-off and saturation. Such transistors require to be driven from low impedance, and a suitable driver IC should be used.
Its works well with 12v 2amp input.
Good job bro,
Can this coil only lights up only cfl bulbs, can it light any old glass based neon,krypton or argon gas filled 2 5v torch bulb ?
Can you make a try with your readily available new updated version of jammer?
Eagerly waiting for your reply
its good working jammer.
teslaundmehr can you make another tutorial video on tesla coils? i am interested in building one
I love the new circuit! Do you plan on doing any other tweaks to it?
Hi. Is there are some options for to buy the Tesla coil or they’re not for sale ? Thank you In advance
Nice explanations!
Thanks Johnny!
Hello I wish that you make a project emp with a NE555 Chip and multiple blink speed modes? I have seen some similar videos but your videos are much easier to understand. 🙂
Wow
Keep it up
Thanks!
Hi bro, it is an amazing video
But, what you do not explain the circuit who it work, like what is the benefit of the capacitor between collector and emitter
I need one of those emp jammers to buy from you how do i get intouch with you
Thanks for sharing
To create a REALLY EFFECTIVE military grade JAMMER we should join forces... My mechanical amplifiers combined with your electronic wizardry.... Think about it! Also Michael Reeves with his code writing skills and we could create a MECH or a ROBOT which would go around the city at night jamming and blockbusting whole suburbs - - - nothing working as long as our robot would be jamming...
Why do you think your 12V tesla coil circuit makes the biggest arcs on youtube for that input voltage? Is it the coupling between primary and secondary? I'm so curious because I'm planning to build a tesla coil gun soon too!
Best channel ever!!!
Ohh Thank you!!!!
Frequency and vibrations upon/ within the aether to BREAK STUFF! 😋
Cant we make a sparkles or noiseless or a silence emp jammer?
Is any possible make this circuit based on MOSFET rather then Transistor?
Why do you say that the circuit is imperfect? Does it fry transistors?
How do I make Emp jammer from disposable camera for fish tables?
How would you connect e.g. a dipole or a loop antenna? Second wire goes to GND?
The voltage across the inductor is equal and opposite to that across the capacitor, so there are two places in the circuit to put each pole.
Like a stronger slayer exciter but not a slayer exciter ⚡
I like your new emp jammer. How do one purchase it.
Thanks, the new scheme is really simple. How much does JLCPCB charge for shipping PCB in Berlin?
can you use transistor C2078 L7T8 friends?
Can you recommend a trusty source of transistors?
Magnifique cher amis
You can put one inside an up-side fish bowl and on the outside, glue a bunch of CFL bulbs that stopped working because of the blown electronics inside them, and people will wonder how the heck are the bulbs lighting up when there are no wires going to the bulbs! I bet we'll see some head scratching!
Record the video of them all confused, and upload so we can all laugh.
100 years ago this would have worked, but not nowadays.
@@-Tris- You'll be surprised how uneducated people are.
Can you explore for us Tesla's "the true wireless"?
edit: there's a video called Tesla Technology Has Been Revived
Parametric resonance between two tank circuits where the earth is the standing wave inductor of the first resonant circuit, and the air is the capacitor of the second resonant circuit. The second tank circuit has half of the resonant frequency of the first tank circuit, where the earth is a standing wave inductor. Two towers are requires for parametric coupling.
friend I want to know the diagram of jammer #18 do you know it?
hammermässig!!!
7:05 you could just have use cheaper calculator XD
Seems like a tesla coil
Hey Leon, wo kann ich spenden? Habe aber kein Paypal.
VG
Hey!
also hier geht das: www.patreon.com/user?u=45443829&fan_landing=true
Da kann man auch zum Beispiel mit Lastschrift machen. Sonst auch direkt per Überweisung ;)
Danke dir :)
Beste Grüße!
I don't think that its correct to call this an EMP jammer. There is no pulsing. It is a jammer, but its a CW jammer.