EMP Jammer Step by Step / Slotjammer Tutorial
Вставка
- Опубліковано 11 гру 2015
- DIY RFID Killer / Jammer • EMP RFID chip killer -...
New Version 2022: • EMP Pulse Generator Ja...
Buy EMP Jammer for 4$: • Buy your own EMP Slot ...
Support me on Patreon: www.patreon.com/user?u=454438...
better tutorial:
• EMP Jammer Step By Ste... - Наука та технологія
I have been making there's for years and I promise you they work 100%. You have to use the right components and make sure nothing is touching. Also the coil can't touch anything when it is firing. Lots of mistakes can be made, but if you do it right it works. Main could is 25-30 and smaller secondary coul is 2x the primary. Power with 3 9volt batteries but can handle 5 9volt batteries.
How much do you charge for them
Don't answer that 👮🕵️
Do you sell these?
It is strange that the power is connected across the emitter and collector.
Also the primary circuit. A high current low impedance supply would not be good. But it seems to work with batteries.
The length of the power leads must affect operation.
please make me two of them i will pay you.also i have an e.l.f. emp that i bought as a sleep aid can it be modified to beat game machine
i was by the part of the resistors but suddenly i got teleported in to the 4th dimension, aha, now for real, very nice tutorial :)
What would happen if I use other diamater for the coil? Would that change the frequency?
Works great!
is the wire used magnetic wire(enamel coated) or basic copper wire
Ola oye que materiales se necesita es que esta en otro idioma y no entiendo por favor me podrias decir en español cuales son xfas para comprarlos
how many turns, in primary and secondary. and any other components can be used when u lack these one's.
here is what you will need:
0,7 mm copper cable
electrical tape
9 volt battery
transistor 2SC2078
10k ohm resistor
47 pF capasitor
220 pF capasitor
soldering-iron
alligator clips
fake :(
how is this sending emp?
transistor is special.
capacitor 500v?
yes
eu tentei fazer mas não consegui não sei oque deu erado acho que e o transistor deve ser paralelo tem outro que se compara a lele ???
I tried to do but could not do not know what gave Erado think and the transistor must be parallel has another that compares to lele ???
will it work with ordinary copper wire? We cant find magnet enameled copper wire anywhere in our hardware stores around. will it also work the same with electric or speaker wire?? Thanks
How many turns is the first coil around the 9 volt battery? You did not mention that in your video??? THANK YOU!!!
Excuse me, could you give me a list of the materials used?, thaks
what should be the voltage supply to run this jammer
tried it and it doesn't work... used 1.2 mm for primary coil, will that make much of a difference in the effect?
hey i liked your video
it was really very helpful but i think that one thing was missing
that is the circuit diagram
can you please frame a circuit diagram for us?
it will be really very good if u do so.
Thanks and i really appeciate that.
charming. i loved the vid.
what parts should I change if I want to use 5v power bank replace the 9v battery?
If Elmer fudd were an electrician.
Nice bro! 👏🏻👏🏻👏🏻
boss can i ask. did the input can use DC or just for AC
ottimo tutorial.....puoi costruirmene uno e spedirlo in italia ?( qui è difficile trovare 2sc2078 originale)
Super danke dir Daumen hoch 👍🏿👍🏿👍🏿👍🏿👍🏿
quiero saber si funciona con 9v o q materiales puedo usar para usarlo con 9v porq lo intente ya creado con transistor c2078 resistencia de 10k capasitor de 47pf y otro de 221pf y nada
hola amigos contrui su jammer como lo mencionan en el video pero no prendio el foco incandesente me podrian ayudar a solucionar mi problema
what did you do with the end of the main wire? just cut it off or loop it through the main coil. Also the schematic u listed for this doesnt match your video build
does this schematic work with 0.6mm copper wire? I tried it but doesnt work. Wanna know where the problem is.
you are a genius....it works
Does this serve to block the telecommunication frequency signal as well?
can u tell me what u have used to make this? thanks
Thank you.
can you please link all the parts needed so everyone including me can build this? because I am having trouble making this jammer using the transistors and capacitors that I have laying around.
Für die kleine Spule empfehle ich einen Zahnstocher oder Schaschlykspiess. Drumwickeln, abziehen und auf das Drahtende der Maincoil schieben. Das ist etwas einfacher. ;-) ♥
hey, what voltage power suply did u use?
Can you make it long range ? like 10 meters
thanks you my man
thanx and wat is the Equivalent transister
Hola con cual voltage funciona ?
hello friend this jammer applies to snuff machines ect, its work?
El mío no prende y lo e probado con una fuente tu en que lo conectas
Thank you for the video I want to know what those electronic components are
Me too
Hi,
cool stuff!!! But: I cant see were the big coil ends. And a circuit diagram and explanation would be nice in the next vid :-). Is it possible that the device requires the voltage supply to have an internal resistance? Otherwise it would not make sense to connect the power supply accross Collector and Emiter.
That arrow pointer thing killed me omfg dead xD 😉
also ' wideo' haha
this is great I can't wait to showed it to my daughter. she is going to flip out
its not funny,but still I LMFAO
can you tell me the materia required. im not able to understand what you said ??
Can I use 18 gauge wire with smaller gauge wire
+Teslaundmehr, Können Sie eine detaillierte Erklärung über die notwendigen Komponenten geben?
wow!!! ang bait!! pasig pinagbuhatan ako.. nagpayong
these components are not available in my area.any other alternatives? Please
I've subscribed!
Hey. Do you have a link to a good transistor and the magnetic wire? Im having hard time find what transistor that will work. Love your work and a translator. Very good video. Thank you. I got mine to work a little. But i dont know where to buy transistor that works. There are so many. Does mosfet have these and do they work? Not all 2sc2078 works.
I have seen this circuit using the 2SC2950. The package is different, the outer leads are reversed.
can you make a schematic of this circuit, also having a hard time with understanding how to wire up both coils.
what can I use instead of 2sc2078 transistor
Would this be able to disable an RFID chip?
what potential should be applied?
Hello Teslaundmehr I live in Brasil I did it but never work can you tell me the secrets our sale me one device working .
How if I use a transistor 2Sc2078?whether or not it do?
can this help to stop roulette 13 number slot machine which is round in circle and stop in which number we want? is this work to stop in any number we wish for??
you got 1 like and a subscriber :)
can you list the component with instruction
good videos
dose the copper wiring to be insulated
but 2sc2078 no stock so i van wich one trnsistor can do
Do you need enamel plated copper wire
does capacitor voltage matter?
hi good night! thank you very much for this, but i want to know how many volts does it works with? please.
luis Felipe Aramburo thank you very much
se be bien en el vídeo pero ya e echo tres exactamente como lo dise en el vídeo y no m funciona el trancistor se sobre calienta y se qema y no se x k y estoy usando el mismo k indican el c2078
Thank you sir
fieraa gracias por suvir el vidio
does it have to be that kind of wire
Hey Can you build a cellular data unjammer. My data is being jammed and I need help
hello, does anyone made like this in video? because i did, and its not working, only transistor very hot after i am turn on. maybe somebody have any ideas?
You guys are fucking awesome that worked brilliantly!!!
m hatch when you say it worked brilliantly? Where did you use it?
m hatch where did you use it successfully?
Of course he says nothing
Does this serve to block the telecommunication frequency signal as well?
my man want to rob a bank
the transistor is the c2078 E2F2?
wie viel meter kupferlackdraht bräuchte man mindestens ?
Tell me what tools you used in EMP jammer.
Hi. I have 3 other transistors: IRF 4905, IRF 740 and IRF 540N. Is this possible to use some of them in this project? Regards
it works.. you only have to find the right components
Is this anti-defender?
can i make it work with only battery, tape and coil??
xD
Nice Video 😂
how about irf450 transistor can be use?
hey could i use the wire of a fan motor
one 10k
one 47pf
one 221pf
and c2078 trasistor but its not working
please help
Hey are good making these or tech? I need help with a project I'll pay
good night, do you know how to make emp jammer no23?
Will it work with .7 wire?
Hi I did this but mine not working any idea why?
Will it break signals for mobile.
can you list that component
Can someone reply on the V on the resistor and on both capasitors? 0.25 0.5 1 2 ? V?
Can I use 2SC2073 instead of 2SC2078 ?
Great tutorial! Thanks. From imgur.
For me it's very annoying when music is loud in videos where I have to hear someone talk, I have to rly focus to hear what you are saying.
Plz what the number of capacitor and transistor
How many voltage we have to supply
Where can I buy a working transistor.??
hello teslaundmehr,
i made a emp jammer but i guess the emp doesnt work, how ???
i used all the same components u say but i have a 221pF and you got a 220pF
3 times 9 V batteries!
is that right .. but it wont work :S:S i dont know what to dooo!!!
Nice for. Hobby, and application of course
I have seen this circuit using the 2SC2950. The package is different, the outer leads are reversed.
how many turns on coils??
great one, indeed good english
Would this fry rfid tags?