It is a spark gap radio transmitter. Which due to the the broad frequencies and large band width are no longer used for radio transmission but was great in early radio in the early 1900s
It's always a good idea to have subtitles on a video if your accent may be difficult to understand for some people. I personally feel the power of the content overrides that effect. GREAT VIDEO SERIES!
I wonder about a furnace ignition transformer, or maybe a microwave transformer. I think they're a higher frequency and I don't know if that matters but they'd sure put out more grunt.
Will increasing the number of turns on the coil improve range or effectiveness? Will adding a high voltage capacitor increase range? What wire did you use? Insulated or not?
In 1938 the International Telecommunications Union prohibited this type of emission (called "class B") to get the last spark-gap telegraphy transmitters off the air, and it is still prohibited in all nations. Title 47 of the FCC regulations has the prohibition in a footnote at the bottom
Thank tou for posting this. But i don't know if it's helpful for me. My neighbours are listening to loud music every night between 12 am and 5 am..i want to fry their audio source and the next 100 that they will buy. How can i make the emp so that it will go 15 meters to that speaker???
because it cause the electricity to fire in short pulses rather than a steady current that way instead of just being a normal magnet it's a pulsing magnet which has a stronger effect on electronics
Consult an attorney and a doctor. FCC Part 15 prohibits emp emissions. USC Title 50 awards 35 years for building and using an emp (not sure they are talking about this device). Modern cars have computers in them, $450-2500, to replace them; you break it, you buy it. If you disable someones pacemaker or respirator etc. you’ll probably be charged with murder.
Reminded me of the slot machine i messed up in high school (in 1998 or 1999), just by using a piezoelectric spark generator from a lighter, and touching it to some metal parts close to the coin input. That just turned it off, and my friend lost the money he put into it, oops. Took several days before it was up and running again, so i guess something happened to it. I just did it out of curiosity though, since i allready had the spark generator after a few days of pestering my friends with it.
Olá, sou inscrito no canal. Será possível fazer um aparelho com 1 metro de raio de efeito, que seja capaz de desligar um aparelho ou mesmo queimar o seu circuito?! Obrigado Atenciosamente
For those of you wanting to make the EMP stronger... Make sure you read this THOROUGHLY before you even think about going down that route, this contains a lot of information useful for what you are intending, and some risks that may deter you from making it stronger than the following explained. If you're not going to read it all, at least heed to this... DON'T GO ABOVE 60 AMPS IF YOU WANT TO KEEP YOUR LIFE. AND REMEMBER, KEEP ALL ELECTRONICS AWAY FROM ANYTHING YOU DON'T WANT TO PERMANENTLY DESTROY! You can up the current in the coil by using a higher rated power supply, or a transformer. Or you can increase the size of the coil from say 10 turns, to about 30, that will increase the strength of the electromagnet, making the field much larger. However if you want to best results, you can add a higher rated power supply, or the transformer for greater current, increase the turns on the coil, but instead of making an open/hollow coil (With no core), use an IRON nail as the core, the bigger, the better... Just don't go over the top, because high current is dangerous, and could lead to severe injuries, or even death. Be careful if planning on using a microwave transformer as they output around 60 amps. Which isn't enough for certain death, but is high enough to cause severe muscle contractions, so I would say stick well within the 10-15 amp range, if you're not ready to risk it all just to make an EMP Device. :) Please read up on further guides if you are skeptical, or seek a professional's opinion before playing with high current. I am not a professional, but I have gone through my fair share of electronic 'experiments'.
Do you, by any chance, mean mA? 60 Milliamperes? 0.06 Amps? Because 60 A (with the 2000 V from a microwave transformer behind it to drive the current through your body) is about 3000x the current needed to injure someone and (let's be generous) 500x the current needed to kill someone, if it goes through the heart. Also, 60 A at 2 kV is about 120,000 W of power. No microwave transformer will supply that much power, even if you short it out. A 600 W microwave transformer will usually be able to supply at most 0.5 A. Which is still absolutely deadly by the way.
Allright then, that makes more sense. You're right though, 60 mA (average over the pulses I would assume) is really quite a lot of current and should not be toyed with. However, I do not quite understand your suggestion of putting an iron core in there. That will dramatically increase the inductance of the coil (the "inertia" might be a good comparison), thus reducing the slope that the EM-field rises with. In average, the field strength will be much increased, but at the cost of maximum field strength and emitted power. Short, but very powerful pulses are definitely the way to go for building an EMP device. (Hey there, NSA. How are you doing? ;P) As such, if you increase the voltage (as you suggested by using a stronger power supply), the destructive power is definitely going to increase a lot. And the danger. So please don't do that unless you know exactly what you're doing.^^
Oh and by the way, in most countries, owning or, even worse, operating any kind of high power Radio frequency device is highly illegal. So there's that. :D
You can be charged with murder if you use such devices around people with electronic medical devices, and generally the disruption of electrical devices has legal ramifications. Most people won't tell you they have a pacemaker, so using these kind of devices in a crowd is an absolute no-no.
That's why it's called an electromagnetic pulse/EMP. If it was an unchanging continuous field, basically no electricity would go into the electronics. Changing fields (due to turning on then off, moving, etc) generate electricity. I believe the spark gap is there to also make the field quickly collapse. I'm not sure if there's other reasons why it's used.
You made a box that resets a calculator wow what a handy Device. The emp is so weak what is the point it's not going to take down a computer system or anything worth attacking.
I just found out this channel. This is internet gold. It is the perfect excuse I needed to get into electronics.
It is a spark gap radio transmitter. Which due to the the broad frequencies and large band width are no longer used for radio transmission but was great in early radio in the early 1900s
You say "as we could see the lamp turns on" but you edited that part out. You did show it later in the video but a heads up.
I noticed that too,around at time stamp 3:40
I think it is an editing error. Check 4:09
The Best Stooge
At first I thought it was because he messed up his camera but it did work later so idk.
Yes, "as we can see", actually do the "we can see" with something important seen. sigh.
3:13 This guy will definitely not win the award for the best video edition.
And his voice doesn't really help...
Looks like those tinfoil hats were a good investment ;-)
Yea, if your a robot... Needs a way bigger battery.
Anyone else find this video after watching the Lock Picking Lawer's video?
Me
Yes...!!!😁😅 someone is planning a HEIST...!!!🤣🤣
Sure did algorithm’s and classifications maybe
It's always a good idea to have subtitles on a video if your accent may be difficult to understand for some people. I personally feel the power of the content overrides that effect.
GREAT VIDEO SERIES!
+Paul Neilson Thanks Paul!
Feels so good to see him posting again regularly. Keep up the good work
I wonder about a furnace ignition transformer, or maybe a microwave transformer. I think they're a higher frequency and I don't know if that matters but they'd sure put out more grunt.
2 questions
1. How did you remove the terminals
2. Dose it actually destroy and fry alive elcetronics
Will increasing the number of turns on the coil improve range or effectiveness? Will adding a high voltage capacitor increase range? What wire did you use? Insulated or not?
Muhammad Khan my questions too
too much questions dudes go back to class
Platinum phones & computers shut
@@platinumphonesandcomputers and even you don't know nothing about that.
Can EMP generator transmit Wireless Electricity ?
Neat. Please demonstrate with radio and cell phones... can it block so that meetings or family dinners can be enjoyed?
Fantastic. Will this work against Skynet?
Against the first generations ? Maybe. But if the CPU were completely shielded with metal and used optocouplers instead of wires... nah
Very interested in seeing if this can be produced smaller with more power. And its magnetic field effects. New sub. Tyty
Nice video, but cant we avoid the spark and the noise coming out of the gadget? Isn't it possible? Cant we make any such silent EMP device?
In 1938 the International Telecommunications Union prohibited this type of emission (called "class B") to get the last spark-gap telegraphy transmitters off the air, and it is still prohibited in all nations. Title 47 of the FCC regulations has the prohibition in a footnote at the bottom
What if you increase the number of windings-would it enhance the EMP output?
Yes, but there is a better method. Simply putting an iron core inside of the coil will significantly enhance the output.
electro boom and you are my favorite channels :)
+Crazy Koala :)
Seems like you missed a demonstration at around 3:20 ...
You should warn {although it SHOULD be obvious} about using this around those having a pacemaker.
Thx for the Intel man! I didn't knew this .
Greater job sir
i love this channel - glad i clicked subscribe !
Dang, I was hoping to win big at the slot machines... There goes my retirement plan D:
Keystone Science I see you in the comments everywhere I go!
You should teach us how to do one of those, but more powerful than that
You will
Same
I love your channel keystone
Good for unlocking electric locks.
Sir be active in UA-cam became ur a best tutor of electronic
this is bs and nothing compared to actuall jamming.
First off its makeshift stuff and he is using really weak HV power supply
Thanks for the video. Which pulse generator module did you use? Can you mention the list of the components and schematic?
Nice sir..lekin ye trick digital meter par kaam karenga Kya
Thank tou for posting this. But i don't know if it's helpful for me. My neighbours are listening to loud music every night between 12 am and 5 am..i want to fry their audio source and the next 100 that they will buy. How can i make the emp so that it will go 15 meters to that speaker???
Can you make one that floats need to go fishing and boat hunting?
3:13 That was some test.
I'm convinced.
It was so strong he had to buy a new camera
poor calculator...
im glad someone else felt for the poor guy, i think he died, just as he was screaming "9"
German calculator, screaming 9 as it's being EMP'd.
NEEEIIIIINNNN !!!!!!!
DU...
DU HAST MICH...
DU HAST MICH GEFRAGT...
NEIN.
NEIN.
good ! I will wrap my entire house with metal insulation to protect it from the electromagnetic strike
Just found your channel. And found it interesting.You showed how aluminum stopped the EMP. Does lead stop EMP'S also. Yes I subbed. Thank you.
+Tooter Plumber in general the emp is stopped by any material that is an electrical conductor
Ludic Science Thank you
why we have to make spark gap instead of normal connection?
It is the spark that produces the radio frequency energy. The coil will radiate it. Early transmitters used spark gaps.
because it cause the electricity to fire in short pulses rather than a steady current that way instead of just being a normal magnet it's a pulsing magnet which has a stronger effect on electronics
Damn didn't realize Pedro was an engineer
thanks for sharing Ludic Science
i wonder the EMP generated is not strong enough to knock off the audio-video recorder.
Ele consegue parar um medidor de energia elétrica digital?
I like your videos so much. Thanks!
Consult an attorney and a doctor. FCC Part 15 prohibits emp emissions. USC Title 50 awards 35 years for building and using an emp (not sure they are talking about this device). Modern cars have computers in them, $450-2500, to replace them; you break it, you buy it.
If you disable someones pacemaker or respirator etc. you’ll probably be charged with murder.
"If you disable someones pacemaker or respirator etc. you’ll probably be charged with murder." This is what I was going to say
Can you tell me about the capacitor that you used for this project
Reminded me of the slot machine i messed up in high school (in 1998 or 1999), just by using a piezoelectric spark generator from a lighter, and touching it to some metal parts close to the coin input. That just turned it off, and my friend lost the money he put into it, oops. Took several days before it was up and running again, so i guess something happened to it. I just did it out of curiosity though, since i allready had the spark generator after a few days of pestering my friends with it.
Wormweed why was there a slot machine in your school lol
Tyson Romaniuk my high-school was nextdoor to a music/theater scool, and that's where the slot machines were, in their cafeteria.
Tell me which equipments used to make this emp.
If you put a cone of aluminum around the copper coil couldn’t you direct where the fields go
What does it do with smart phones?
Olá, sou inscrito no canal.
Será possível fazer um aparelho com 1 metro de raio de efeito, que seja capaz de desligar um aparelho ou mesmo queimar o seu circuito?!
Obrigado
Atenciosamente
why do you need the spark gap, is it to make it pulse instead of just be an electro magnet?
+Alex Keadle yes
For those of you wanting to make the EMP stronger... Make sure you read this THOROUGHLY before you even think about going down that route, this contains a lot of information useful for what you are intending, and some risks that may deter you from making it stronger than the following explained. If you're not going to read it all, at least heed to this... DON'T GO ABOVE 60 AMPS IF YOU WANT TO KEEP YOUR LIFE. AND REMEMBER, KEEP ALL ELECTRONICS AWAY FROM ANYTHING YOU DON'T WANT TO PERMANENTLY DESTROY!
You can up the current in the coil by using a higher rated power supply, or a transformer. Or you can increase the size of the coil from say 10 turns, to about 30, that will increase the strength of the electromagnet, making the field much larger. However if you want to best results, you can add a higher rated power supply, or the transformer for greater current, increase the turns on the coil, but instead of making an open/hollow coil (With no core), use an IRON nail as the core, the bigger, the better... Just don't go over the top, because high current is dangerous, and could lead to severe injuries, or even death. Be careful if planning on using a microwave transformer as they output around 60 amps. Which isn't enough for certain death, but is high enough to cause severe muscle contractions, so I would say stick well within the 10-15 amp range, if you're not ready to risk it all just to make an EMP Device. :) Please read up on further guides if you are skeptical, or seek a professional's opinion before playing with high current. I am not a professional, but I have gone through my fair share of electronic 'experiments'.
Do you, by any chance, mean mA? 60 Milliamperes? 0.06 Amps? Because 60 A (with the 2000 V from a microwave transformer behind it to drive the current through your body) is about 3000x the current needed to injure someone and (let's be generous) 500x the current needed to kill someone, if it goes through the heart. Also, 60 A at 2 kV is about 120,000 W of power. No microwave transformer will supply that much power, even if you short it out. A 600 W microwave transformer will usually be able to supply at most 0.5 A. Which is still absolutely deadly by the way.
Yes, I did mean mA. Was quite late when I had written that. Thank you for your corrections, greatly appreciated.
Allright then, that makes more sense.
You're right though, 60 mA (average over the pulses I would assume) is really quite a lot of current and should not be toyed with.
However, I do not quite understand your suggestion of putting an iron core in there. That will dramatically increase the inductance of the coil (the "inertia" might be a good comparison), thus reducing the slope that the EM-field rises with. In average, the field strength will be much increased, but at the cost of maximum field strength and emitted power.
Short, but very powerful pulses are definitely the way to go for building an EMP device. (Hey there, NSA. How are you doing? ;P) As such, if you increase the voltage (as you suggested by using a stronger power supply), the destructive power is definitely going to increase a lot. And the danger. So please don't do that unless you know exactly what you're doing.^^
Oh and by the way, in most countries, owning or, even worse, operating any kind of high power Radio frequency device is highly illegal. So there's that. :D
who is going to get 60 amps lets say 10kV ??
Where is the link for previous video?
what is the ampere for this and is is safe to use on the human body and brain?
what is the amps and voltage?
We can use this for Tesla coil, this coil is use as primery
Wtf, creí que sólo tenías canal en Español :0 Eres Grande!!!
You can be charged with murder if you use such devices around people with electronic medical devices, and generally the disruption of electrical devices has legal ramifications. Most people won't tell you they have a pacemaker, so using these kind of devices in a crowd is an absolute no-no.
Was he using bare or enameled copper wire for the coil?
the spark gap must be in the input of the coil? or it make no difference?
Estoy suscrito a tu canal en español jaja haces un excelente trabajo
( ͡° ͜ʖ ͡°)
Can anyone explain to me why you need this spark gap? Is it just to see if the circle is wokring or what?
hey why do you want a high voltage power supply? i dont understand
Interesting experiment, I'll try it with a neon light HV transformer :)
make a video on how to make that high voltage power supply
the one hes using can be bought on amazon. search for "high voltage generator" theyre under $10
i got mine for $2 on ebay
www.dhresource.com/albu_356664299_00-1.0x0/super-high-voltage-generator-high-voltage.jpg
I want to make a constant pulse generator to keep sharks away. Can you pls advise via email what to do
Klaus
Ok how do i make onenof these and make it directional? For those dbags with 5000 watt stereos turned up wayyyy too loud at stoplights...
Dok Cutty i think you can make use of a faraday cage like structure, but still it's very short range.
What gage is your Cu wire? Is it shellacked/ insulated? Does. it matter on the number of turns or revolutions around the can? Thanks
+Chip Friday 24 awg. It is enamelled wire. 15 turns is 0k
I'm pretty sure that if you had a larger pinch (EMP), the Tin-Foil would not block it at all
you can use a 10 times stronger pinch but a slightly thick foil will block it
So a pinch that could wipe out a city block, a little piece of foil will block? That's Cool!
What if it’s more powerful I was reading an article about military grade emps able to penetrate 3 feet is concrete
What is the purpose of the spark gap? Just to create pulses rather than a continuous field?
That's why it's called an electromagnetic pulse/EMP. If it was an unchanging continuous field, basically no electricity would go into the electronics. Changing fields (due to turning on then off, moving, etc) generate electricity. I believe the spark gap is there to also make the field quickly collapse. I'm not sure if there's other reasons why it's used.
@@HarrisonMartinson Can it be used on an electrical wire to cut the current?
How emp will destroy nano chips put video for that, and for frequency generator
What nanochips are you talking about?
Can you tell me will this release static electricity from my body if I pointed it at myself ??
walk bare foot
your language is different I wanted to know which country are you from ?
Would this emp have any effect on digital electric meters?
It will have an effect on the display
Love your Vids
Nice on bud ty
👌
What about a subwoofer coil
Can it be used on an electrical wire to cut the current?
Emmm! Let me go to the kitchen to start with my spark lighter! 😂🤣🤣
What will happen if we use this with a phone ?
The phone will off or not ?
It would turn off depending on the power and if left for long enough it could kill it permanently
I didn't see any fluorescent flash whatsoever.
I slowed it down to .25 fps, and daw zero flash.
How did you protect your camera with alumnium foil without blocking the lens?
+LiuyoMZ I did not. The pulse only travels a few centimeters. Its power decreases with the square of the distance.
LiuyoMZ FLEur and the at home
Maybe your device was just too weak to penetrate the thin aluminum foil? Make a more powerful device and it will go through the aluminum foil.
I think it just turns the emp into heat, so it would melt rather than leak emp
this why there are tin foil hats?
how strong is it
what are all the ingredients
someone please tell me asap
How can I reduce th3 sound
how many windings
@Ludic Science how many volts does this device generate?
Why do you need the spark gap???
en.wikipedia.org/wiki/Spark_gap#Radio_transmitters
Upto which range does it works
What's the coil mm
Thank you
wheres the caapacitor and transaformer?
I don't see the light bulb light up
What is the range and power of a device this size?
What if incandescent lamp of 1.2W is placed near to Emp device????
nothing happens to incandescent lights
Ludic Science how do I explode an incandescent lamp? Without any physical connection in between
hmmmmm, only thing I can think of is to use sound waves, as when the singer breaks the wine glass
Ludic Science Do u think?? Will it gonna work???
how many mm of your coil was? 90% pure?
You made a box that resets a calculator wow what a handy Device. The emp is so weak what is the point it's not going to take down a computer system or anything worth attacking.
can you touch the coil whilst it is active?
Can you please make this emp device?
buena traducion amigo
danke
Can you make this for sale please
Please make a video on bug killer bat