Hi Sir, I was following you daily I expect this video from you...thanks fo the video.i have one doubt this in interview they asked me 1.what happened if inductor get saturated. 2.why duty cycle only 0.1,0.5 like in decimal why not 1,2,5,10 etc. This two question I can't answer Make video for this question thanks in advance
Sir make a video for explaining about relation between v-out and input frequency, when frequency increases or decrease without changing duty cycles . Thank you
nice video, im having trouble understanding the part when the inductor is switched off. I thought the magnetic feild that it had built up inside would just diminish, but your saying that it changes polarity? So the load is being fed with A/C now and not DC??? I thought inductors just resisted a CHANGE in current,how is it able to just flip 180 degrees all of a sudden? How is that happening? thanks!
when a current flows in an inductor a magnetic field develope and when the curren is switched off the field callapse and produce a current in reverse, you are not feeding with ac since there is a diode
I don't understand the electrolyte capacitor in this circuit because this capacitor will be dameged if it is connected in the wrong way and in this circuit the plus and minus are changing through the coil. Can you explain why it wil not be damaged?
I really like the synchronous design better in every way high voltage conversion to amperage is more efficient I was used the regular design and 450wAtt 50v converter to 15 volt I draw 50 amp with 1 volt drop with synchronous converter but 46 amp with regular converter 3.5 volt drop
Good morning sir, I have a buck converter with 36 to 72 DC input voltage range and output voltage is 12 volt and output current is 5 Amp. But I have to operate it on 60 volt input voltage max and output voltage 12 volt and 10 Amp. What will be changes in the circuit or in components. I am your fan from India. Thank you
assalamualaikum.. Thanks for sharing Sir very informative principle of the buck converter. I have a question. MPPT (Maximum power point Tracker) usually used in solar charge controller, basically have similarity with buck converter. It can regulate output voltage based on a set point ( battery voltage system). my question is, How can MPPT increase amp output? for example, my solar panel has a total 120-watt peak, with VOut around 21v, and 5.5Amp. with the MPPT controller, I can change my 12V battery system to almost 10A. thanks for the explanation.
Sir Please Read My Comments First Assalamualikum I want learn Basic Electronics And How You Learn This Electronic Please share Your Experience And Suggestions. i want to be like you Please Share :)
wa alaikum salaam brother it is suggested to study engineering and spending time in practical field if Mechatronics or Electrical Engineering is selected, that will better
Frst..... Viow plz pin nice sharing info video🌹🌻
thanks a lot bhai
Excellent upload dear friend, have a blessed Wednesday 😊
Very clear introduction to Buck converter operation and basic components + warnings . Excellent !!!
it is my pleasure
Hi Sir,
I was following you daily I expect this video from you...thanks fo the video.i have one doubt this in interview they asked me
1.what happened if inductor get saturated.
2.why duty cycle only 0.1,0.5 like in decimal why not 1,2,5,10 etc.
This two question I can't answer
Make video for this question thanks in advance
Very clear axplained and shown. Nice video! Thanks!
You are welcome!
I like your explanation I admire your nice tools and I love your accent ❤, May Allah swt protect you and guide you brother
Informative and knowledgeable vedeo
Thank u so much.
best regards and special thanks
like excellent buck regulator explained with theory & practical
best regards and special thanks
Well explained. Thank you and have a great day!
Please make a video on Muti Phase DC DC buck converter.
Used for High currents.
Great , very informative as usual, thanks for sharing and updating us.........
best regards and special thanks
Vary good sir , better explain than our campus 😊
Thanks and welcome
Just the best explanation about this topic.
Sir make a video for explaining about relation between v-out and input frequency, when frequency increases or decrease without changing duty cycles . Thank you
Nice detailed presentation. Thanks.
You are welcome!
good informative video thanks for sharing
So nice of you
Very good and useful information sir thanks for sharing this knowledge to us
Most welcome
Very informative. Thank you
Very welcome
Thanks for the video. I have a question.what is effect pwm frequency on the output voltage? Thanks from Turkey.
Wonderful!thank you👍
best regards
Excellent thanks for sharing
best regards and special thanks
Good 👏👍👋👋
best regards
Great explanation
it is my pleasure
Great "JOB "...Thanks
nice video, im having trouble understanding the part when the inductor is switched off. I thought the magnetic feild that it had built up inside would just diminish, but your saying that it changes polarity? So the load is being fed with A/C now and not DC??? I thought inductors just resisted a CHANGE in current,how is it able to just flip 180 degrees all of a sudden? How is that happening? thanks!
when a current flows in an inductor a magnetic field develope and when the curren is switched off the field callapse and produce a current in reverse, you are not feeding with ac since there is a diode
please check this video
ua-cam.com/video/11oU3ykKKUQ/v-deo.html
I don't understand the electrolyte capacitor in this circuit because this capacitor will be dameged if it is connected in the wrong way and in this circuit the plus and minus are changing through the coil. Can you explain why it wil not be damaged?
I really like the synchronous design better in every way high voltage conversion to amperage is more efficient I was used the regular design and 450wAtt 50v converter to 15 volt I draw 50 amp with 1 volt drop with synchronous converter but 46 amp with regular converter 3.5 volt drop
How are you sir. Can I replace BA 5417 ic with TA8229K?
great video
Va Aleykum selam dear brother
Many many thanks
Sir, if possible please make video on inductor inductance ,for full bridge rectifier....Thank You so much for enhancing knowledge.
Good job ...... thanks
best regards
Thank you, sir !!!
You are welcome!
Brother,COULD YOU MAKE PLC CONTROLLER RELATED VIDEOS LOT OF LOVE FROM KUWAIT
How current will handled and how much maximum load it can handled??? Please explain me sir
Sir I want to make basic three phase inverter without driver Ic. Because every ic I use gets burn. I want to contact you.
MashAllah great
Thanks...sir ji....
best regards
Good morning sir,
I have a buck converter with 36 to 72 DC input voltage range and output voltage is 12 volt and output current is 5 Amp.
But I have to operate it on 60 volt input voltage max and output voltage 12 volt and 10 Amp.
What will be changes in the circuit or in components.
I am your fan from India.
Thank you
assalamualaikum..
Thanks for sharing Sir very informative principle of the buck converter.
I have a question. MPPT (Maximum power point Tracker) usually used in solar charge controller, basically have similarity with buck converter. It can regulate output voltage based on a set point ( battery voltage system).
my question is, How can MPPT increase amp output?
for example, my solar panel has a total 120-watt peak, with VOut around 21v, and 5.5Amp. with the MPPT controller, I can change my 12V battery system to almost 10A.
thanks for the explanation.
thanks sir ji
best regards
👌👌👌
👍👍
✋
Salam brother
Can you please explain H-bridge non isolated buck converter.
Hoping your cooperation, thank you
Lovely
best regards 💕
👍
best regards and special thanks
Who named these things? Allow me to suggest a new name. Welcome to the SVD power supply. Sliced Voltage Delivery power supply.
best regards and special thanks for suggesting SVD really it is meaningful and perfect fitting to its function
please accept my best regards
Sir Please Read My Comments
First Assalamualikum
I want learn Basic Electronics
And How You Learn This Electronic
Please share Your Experience And Suggestions.
i want to be like you
Please Share :)
wa alaikum salaam brother
it is suggested to study engineering and spending time in practical field
if Mechatronics or Electrical Engineering is selected, that will better