Це відео не доступне.
Перепрошуємо.

The K-Rain 11003 ProPlus RCW Rotor

Поділитися
Вставка
  • Опубліковано 29 лис 2020
  • Buy now: www.sprinklerwarehouse.com/k-...
    In this video, Dwayne Smith your Sprinkler Warehouse Pro discusses a few of the features of the K-Rain ProPlus Non-Potable Rotor and shows you how to change out a nozzle and make some adjustments. Available from SprinklerWarehouse.com sku#: 11003-RCW
    Read more about K-Rain's ProPlus Series on our blog: school.sprinklerwarehouse.com...
    🌿 Sprinkler Warehouse: Your One-Stop Shop for Irrigation & Landscaping Needs 💦
    bit.ly/sw-homepage
    We offer a hefty selection of professional-grade products for both contractors and DIY enthusiasts, from smart solutions for efficient water management to sprinkler system accessories to the repair tools to keep everything running smoothly.
    _____________________________________________
    Shop All Categories:
    Shop Controllers → bit.ly/sw-controllers
    Shop Drip Kits → bit.ly/sw-drip-kits
    Shop Rotors → bit.ly/sw-rotors-
    Shop Spray Heads → bit.ly/sw-spray-heads
    Shop Valves → bit.ly/inline-valves
    Shop Blu-Lock → bit.ly/sw-blu-lock
    Shop Nozzles → bit.ly/sw-nozzles
    Shop PVC Fittings → bit.ly/sw-pvc-fittings
    UA-cam comments are not monitored. Please direct your questions to the customer service representatives on www.sprinklerwarehouse.com. Warehouse hours are 8am-5pm Monday through Friday.
    #sprinklerwarehouse
    #irrigation
    #sprinklersystem

КОМЕНТАРІ • 15

  • @rstepp4
    @rstepp4 Рік тому +1

    One of the BEST and right to the point videos ever!!

  • @shalimarbrickhouse8698
    @shalimarbrickhouse8698 2 роки тому +1

    The video and your additional information was extremely helpful. Thank you so much for taking the time to make this video!

  • @derricktrahan3645
    @derricktrahan3645 Рік тому +1

    This is the hardest thing to adjust I have ever seen in my life !!

  • @brettls2
    @brettls2 2 роки тому +3

    You literally didn't show the one thing that I came here to see, how do I change the direction it sprays? It won't stop spraying my house and I want it to spray the complete opposite direction.

    • @SprinklerWarehouse
      @SprinklerWarehouse  2 роки тому +2

      Thank you for reaching out. Every rotor has a left stop. Manuals can be found on the product page on our website for customers to reference. Below ore instructions for setting the arc:
      1- FINDING THE LEFT START: Place your finger on the top center of the nozzle turret. Rotate the turret to the right until it stops and then back to the left until it stops. Notice the position of the nozzle arrow. This is the “Left Start” position. The sprinkler will begin spraying from this position and rotate clockwise until it reaches the right Adjustable Stop-Return Point.
      2- ORIENTING THE LEFT START POSITION: Insert the K-Key in the keyhole on the top of the nozzle turret and turn the key ¼ turn to insure that the key does not slip out of the keyhole when you pull it up. Being careful
      not to allow the nozzle turret to turn, firmly pull up the entire spring-loaded riser. Hold the lower riser assembly up with one hand. Now turn only the lower riser clockwise or counter-clockwise until the nozzle arrow is pointing where you want the sprinkler to begin spraying.
      3- CHANGING THE ARC: Insert the K-Key or a small flat blade screwdriver into the Arc Set Adjustment slot. Turn clockwise to increase the arc or counter-clockwise to decrease the arc.
      We hope this helps!

    • @LordSzadekXL
      @LordSzadekXL 10 місяців тому

      @@SprinklerWarehouse what do you do if the lower riser won't turn? double checked that it would turn when I bought it, but after installing it won't turn to allow adjustment of the left start

  • @REALBanannaman
    @REALBanannaman 2 роки тому

    I need these with a check valve

  • @MrCosmos110
    @MrCosmos110 6 місяців тому

    I'm sorry, on the question below, I meant the Radius Adjustment.
    No guessing on the "Radius Adjustment" (?)
    Brand new, I screw it into place and turn the adjustment to 180 degrees. So how am I suppose to know where the sprinkler head starts it's rotation?
    If that sounds stupid then consider that I'm disabled and by the time I make it from the aerobic system to double check the ARC, the shows over. If I can't manage a way to know where it'll start before I install it then it useless. Any advise?

  • @1824hotrod
    @1824hotrod 2 роки тому +3

    How do you set the start position ?

    • @SprinklerWarehouse
      @SprinklerWarehouse  2 роки тому +1

      Hello, please review the following to help assist with the start position.
      Place your finger on the top center of the nozzle turret.
      Rotate the turret to the right until it stops and then back to
      the left until it stops. Notice the position of the nozzle arrow.
      This is the “Left Start” position. The sprinkler will begin
      spraying from this position and rotate clockwise until it
      reaches the right Adjustable Stop-Return Point

  • @MrCosmos110
    @MrCosmos110 6 місяців тому

    No guessing on the "ARC Adjustment" (?)
    Brand new, I screw it into place and turn the adjustment to 180 degrees. So how am I suppose to know where the sprinkler head starts it's rotation?
    If that sounds stupid then consider that I'm disabled and by the time I make it from the aerobic system to double check the ARC, the shows over. If I can't manage a way to know where it'll start before I install it then it useless. Any advise?

  • @donotrobme9295
    @donotrobme9295 3 роки тому

    Are these interchangeable with hunter Pgp or rainbird rotor. I’d so , which rainbird or hunter. Thx

  • @YenCrew
    @YenCrew Рік тому

    So you can't set it in a locked position...
    I want sprinklers to spray in one direction

  • @apatriot7538
    @apatriot7538 Рік тому

    Thanks for not showing how to set the left side start position 😤