Thank you so much for the video. My toilet with the WDI B3300-M valve has been running, making weird noises, and the water bill has been going up as a result. I followed this video and the toilets are no longer running or making weird noises. This video has saved me some money by not having to call a plumber, replace the valves or paying a higher water bill. Thanks again.
Thank you for this video. I have 2 of these toilets and both started giving issue within the same week. I had a plumber come and quote me $300 per toilet. I watched your video, took out the pieces and rinsed them, put them back in and everything works fine now. Saved me $600, thanks !!
Thank you - again, you are the ONLY video out there showing how to clean and/or remove this model - after much searching. You saved my bacon! Removed and cleaned as shown and it solved the slow, squeaky leak we had. This was a life saver...
Thank you very much for this! I had been looking for a video on how to dismantle this type of flushing mechanism, since my fill valve was not closing at all. This has saved me from hiring a plumber! God bless you sir!
Thanks for posting. I had the same problem and this fixed it. There was actually nothing inside, no dirt or scale or anything, so I am inclined to think that your "fix" only indirectly addresses the problem.
Thank you so much for uploading this video, ive just followed your steps and its fixed my leaking toilet. You have probably just saved me a small fortune. Thank you so much
Awesome video Nai-jalong. Thanks for sharing. I've watched tons of videos and spent a lot of time without success . Your is very clear and simple. After watching I've fixed my toilet literally for 5 min. Thanks again.
I have a little bit different system but filling mechanism looks like this. Was looking how to disassemble and to clean it and this video helped a lot.
Find it ! There is no other way than gently loosen the plastic pins with a screw driver to remove the fill valve cover. Finally solve the problem. Toilet is now working great.
Thanks! Great video. It was easier taking off than putting back on. Not sure how the locking clip on fill valve work as it totally came off. I slapped it back on but don’t know if I did it correctly but my noisy toilet is quiet now! Mine was just noisy when refilling. It wasn’t leaking but this fix worked! My rubber casket was getting old. Wonder if they sell new ones. I cleaned both gaskets.
Great video. I couldn’t remember how to get the head of the inlet valve apart and your video made it clear. It seems you have to clean the seals in the valve on these about every couple years or it will leak. Thanks!
Now, how did he remove the gray top from the fill valve? BTW he put the flash valve wrong. White side is the full flush which should be on the left. See the beginning of the video and than see the end. However I do appreciate the video, thanks!
Chen Min did a good job in introducing.We also mainly provide toilet accessories.Including this brand WDI. If you have bulk or retail, you can come to us. Thank you.
So how do you attach the little clip on the left-hand column? Couldn’t figure it out, so just left it off. Where can someone get a repair manual for these things?
I am not able to loosen the fill-valve pushing on the black clip at the base. The black clib is just a rubber to ensure it is water tight no? or is there another clip that I am not seeing?
Thanks for the video this has been causing me problems for weeks.. I have the same model B3300 but no white tubes/hoses attached just the outlets, Any ideas?
Ok; I worked backwards from 2:06 when you put it back in. Used a flat head screw driver to lever it up; cleaned the whole assembly in CLR. I didn’t remove the centre part just the top of the left thing. Another gasket that fell out-I put it in upside down and had to take it out again and flip it. Solved the moaning problem.
These things are such a pathetically stupid design; nice to know you can take them apart, but way more complicated, delicate, prone to clogging and hard to get parts for than can possibly be justified. Who comes up with this stuff? There's lots of designs on the market that work fine.
Thank you so much for the video. My toilet with the WDI B3300-M valve has been running, making weird noises, and the water bill has been going up as a result. I followed this video and the toilets are no longer running or making weird noises. This video has saved me some money by not having to call a plumber, replace the valves or paying a higher water bill. Thanks again.
Thank you for this video. I have 2 of these toilets and both started giving issue within the same week. I had a plumber come and quote me $300 per toilet. I watched your video, took out the pieces and rinsed them, put them back in and everything works fine now. Saved me $600, thanks !!
Thank you - again, you are the ONLY video out there showing how to clean and/or remove this model - after much searching. You saved my bacon! Removed and cleaned as shown and it solved the slow, squeaky leak we had. This was a life saver...
Please, can you tell us how to remove the grey cap of the fill valve. It''s not shown in the video. I'm stucked.
I soaked the whole unit and the seal in boiling water and cleaned it from all debri build up and its like new. Thank you for this video
Thank you very much for this! I had been looking for a video on how to dismantle this type of flushing mechanism, since my fill valve was not closing at all. This has saved me from hiring a plumber! God bless you sir!
Thanks for posting. I had the same problem and this fixed it. There was actually nothing inside, no dirt or scale or anything, so I am inclined to think that your "fix" only indirectly addresses the problem.
Thanks for this. Cleaning the rubber seal stopped my toilet from constantly dripping! Great video.
thank you! this is the only source online that I could find after much googling that speaks to the problem I was having.
Thanks!! Just sorted out my constantly running toilet.
Thank you so much for uploading this video, ive just followed your steps and its fixed my leaking toilet. You have probably just saved me a small fortune. Thank you so much
Awesome video Nai-jalong. Thanks for sharing. I've watched tons of videos and spent a lot of time without success . Your is very clear and simple. After watching I've fixed my toilet literally for 5 min. Thanks again.
Thanks to your video I managed to stop running water from inlet valve, thank you soo much God bless
This worked great, solid steps on each portion and fixed a super annoying leak for 10 minutes of cleaning
Thanks for posting this video. Really helped me with my Uberhaus. 🙏Some commentary would make it better though.
I have a little bit different system but filling mechanism looks like this. Was looking how to disassemble and to clean it and this video helped a lot.
Thank you! Very easy to follow video. Just need to find a new seal now, as one of the little flaps has bent and won't go back.
Thanks for making this video. My toilet is now working and it took 10 minutes!
Find it ! There is no other way than gently loosen the plastic pins with a screw driver to remove the fill valve cover. Finally solve the problem. Toilet is now working great.
That was great. Just fixed my Costco waterridge C22148C. Great instructions. Thank you!
Thank you for Saving my Marriage!
I applaud you!!!👏👏👏👍
Thanks! Great video. It was easier taking off than putting back on. Not sure how the locking clip on fill valve work as it totally came off. I slapped it back on but don’t know if I did it correctly but my noisy toilet is quiet now! Mine was just noisy when refilling. It wasn’t leaking but this fix worked! My rubber casket was getting old. Wonder if they sell new ones. I cleaned both gaskets.
Had the same problem. Not at all sure how to put this little clip back; ended up leaving it off. No problem so far.
Great video. I couldn’t remember how to get the head of the inlet valve apart and your video made it clear. It seems you have to clean the seals in the valve on these about every couple years or it will leak. Thanks!
00
Nice design, works well and very easy to set up.
Thanks, fixed in less time than 10 min. Thought I was going to have to by new.
Thank you! Having issues with the same fill valve will give this a try soon!
Now, how did he remove the gray top from the fill valve? BTW he put the flash valve wrong. White side is the full flush which should be on the left. See the beginning of the video and than see the end. However I do appreciate the video, thanks!
Fixed my toilet as well. THANK YOU!!!
Worked Great. Thanks for the helpful video.👍
Thank you for the video. I was able to fix my wc. You are Awesome
Thank you, thank you. Helped me fix the exact same issue myself. Maybe well water caused the buildup on the rubber seal?
thanks for vid. Fix the valve and saved me from calling the plumber!
How did you take the top off of the fill valve?
Chen Min did a good job in introducing.We also mainly provide toilet accessories.Including this brand WDI. If you have bulk or retail, you can come to us. Thank you.
A big thanks for this video!!! It works
Great video. Thank you.
Thank you for the video, do you know how to adjust the water level? I have been searching on UA-cam by I found only different model adjustments
Thanks! It took me a while but next time will be easier.
So how do you attach the little clip on the left-hand column? Couldn’t figure it out, so just left it off. Where can someone get a repair manual for these things?
I am not able to loosen the fill-valve pushing on the black clip at the base. The black clib is just a rubber to ensure it is water tight no? or is there another clip that I am not seeing?
Thanks for the video
Thanks for the video this has been causing me problems for weeks.. I have the same model B3300 but no white tubes/hoses attached just the outlets, Any ideas?
thank you! very helpful!
Where can I buy the fill valve seal for the specific model I have this model but can not find a seal for it at all
Excellent. Très bien expliqué. Merci beaucoup
Informative but how do you adjust the water level higher?
What is the thin pipe that kinda loops from the fill valve on the left to the overflow to the right? I don't seem to have one of those!
I pushed down the black clip on the fill valve but I don’t seem to be able to then adjust the height. Any ideas? Thanks!
????
Joel twist clockwise to unlock. Ajust the height. Twist counterclockwise to lock it back.
I have the same problem, is it to just clean the washer under the tap ?
Did u have to push the Bottom black clip upwards after finishing ?
Worked for an American Standard 2534C. What a wacky thing...?!
I put a Korky universal in from Home Depot.
Great video. But it would be exponentially better if you talked.
Awesome worked great
Good stuff, thanks
Thank you
At 1:36 you jump to holding the gasket without showing how to take the white plastic part of first…
Ok; I worked backwards from 2:06 when you put it back in. Used a flat head screw driver to lever it up; cleaned the whole assembly in CLR. I didn’t remove the centre part just the top of the left thing. Another gasket that fell out-I put it in upside down and had to take it out again and flip it. Solved the moaning problem.
Thumbs up from me.?
speak up, I can't hear you
These things are such a pathetically stupid design; nice to know you can take them apart, but way more complicated, delicate, prone to clogging and hard to get parts for than can possibly be justified. Who comes up with this stuff? There's lots of designs on the market that work fine.