Gasket replacement wizardry! CAR WIZARD replaces a pan gasket on '73 Chevy C20
Вставка
- Опубліковано 16 бер 2020
- Watch the CAR WIZARD 🧙♂️ replace a transmission pan gasket on a mint 1973 Custom Deluxe C20 3/4 ton Chevy pickup.
🔮🔧 AMAZON AFFILIATE STORE: www.amazon.com/shop/omegaauto... 🔧🔮
🇬🇧🇬🇧 UK AMAZON STORE: www.amazon.co.uk/shop/omegaau... 🇬🇧🇬🇧
🧰 BENDPAK LIFTS: www.bendpak.com 🧰
💻 OVERSTEER ARTICLES: www.autotrader.com/oversteer 💻
👕 CAR WIZARD MERCH: teespring.com/stores/carwizard 👕
📷 INSTAGRAM @therealcarwizard 📷 - Авто та транспорт
Wizzard's elbow clicks when the bolt reaches proper torque :)
it may be an underlying health problem or it could be correct GM spec. Id still see a Doctor.
Gergely Záruba yours doesn’t ?
My only wish is that you wear gloves so that you're not exposed to chemical products. Don't want my boo to get sick.
You joke but getting old sucks.
Wizard puts out more videos while we're stuck at home. Bless this man
Well explained. Mrs. Wizard asks some good background questions and does a great job with the camera. Kudos to you both
Yes! This is why I subscribe - watching the wizard perform his magic with his tools. The nice cars are good, the tool reviews helpful, but lots of people do that. Skilled repair and maintenance is what differentiates this channel. "Bob Ross with a wrench" is where this channel shines.
Well put, "Bob Ross with a wrench"
Before pulling the pan , I use a transfer pump , feeding the uptake hose down the dipstick tube .
You can pull most of the fluid out of the pan before you pull it.
I use it for oil changes too, so I don't have to pull off the bottom engine cover.
You can actually pick up an oil extractor (works fine for this as well) from harbor freight for pretty cheap. Great for emptying out gearboxes as well. Won't get everything but it beats dumping a gallon (or 2 in some cases) of ATF all over your garage floor. Personally I just use my shop's flush machine in dipstick mode. Makes refilling it a lot easier as well.
Smart ! Ima do that .
@@rayspickler5247 Dang that's cool
I do the same thing & do it for changing the fluid 1x per year...
I use 3M spray adhesive on gaskets
Mr. and Mrs. Wizard, you're the best!
I'm so disappointed the Wizard didn't taste that vintage trans fluid!
I was sooo hoping he would.
@@gavinplunkett977 73 was a very good year. Fewer additives.
It's for beat the best he didn't,last guy to taste vintage trans fluid is no longer alive.
That truck is beautiful. Love these old squares
Thanks for doing the extra video Car Wizard, I’m a massive fan from over the pond in the UK. 👍
Wizard, please do more of these instructional vids!
Wizard, for years I used to use 3M weatherstrip adhesive to hold my pan gaskets in place. I didn’t have to use much and I could get it off pretty easy with a Scotch Brite disc even when it’s been dried for years. Just a thought if your ever out of super glue. Thanks for the video. It brought back a lot of memories!
Thank you SO MUCH for the extra videos, Mr. Wizard! This will make the quarantine so much more bearable. THANKS!!!
I've done this quite a few times over the years, and I still find it interesting and entertaining to watch you do it. I haven't done the super glue trick, but I have used either gasket shellac (they still make it!) or 1A Permatex to hold the gasket on until it sets before reinstalling the pan. Anything to make your life easier when lying underneath a car! Something to check while you're down there would be the o-ring seal at the speedometer drive, and the vacuum hose to the modulator valve. Thanks for the great content, and for explaining everything so well.
"A tisket, a tasket, The Wizard replaces the gasket".
Nice.
TH350s can be tough to seal..many times previous owners have overtightened the pan, warping the pan holes..sometimes the leak can actually be elsewhere above the pan and only appear to be the pan leaking.
Some torque converters on older vehicles had a drain plug so you could drain more of the transmission fluid out. Also, storing the super glue container in a refrigerator will prevent the glue from hardening.
Rob Stephens i may get that glue on my next hotdog the way my wife cooks,last time i put a bearing in the fridge to shrink it , it was near the stuff lined up to be thrown out. It ended in the trash .
Thank you for posting additional videos while we're all at home!
Great that you make some more video's this week and in the crisis whe're in. Always relaxes me to see you work and talk, so thanks Wizard and miss Wizard !
Ya know, for running a shop and making money off people that don't know what they are doing, the wizard gives excellent advice for those that very well could be going to a shop to have something done that is so simple. Thank you wizard for being a good honest mechanic. They seem to be few and far between now
Thanks Wiz, interesting and valuable content so keep up the good work.
ATF used to contain whale oil, and 1972-73 was right at the tail end its use in automotive applications. If it's the original fluid, that smell very well might be whale oil and other additives breaking down.
Fortunately they discovered jojoba oil was a superior substitute.
I'm about to do a transmission service on my old truck and this video really hit the spot. Thanks!
Pan gaskets I use have smaller holes every so often that hold the bolts in place so the gasket stays in place while installing.
i have also had the same experience. Diesel mechanic, but i also do side work on regular cars. But i guess maybe on exotic cars it might be a problem? Wouldn't know myself, I usually work on American, Asian and some German cars. Also, i always try to look for the torque specs and usually unless stated, go around the clock, ex 12 then 6, 1 then 7, etc. for the final torque
My thoughts as well on the dozens I have done.
I have owned over 100 cars and probably have had my hands in 200ish automatic transmissions and it just depends on the gasket company. For example the rubberish fram gaskets grab the bolt thread but the cork fram generally do not. Those awesome blue gaskets that I believe are made from silicone I have seen go both ways. It really just depends on the manufacturer. Since I have moved ro buying stuff from rock auto mainly I have came across all sorts of brands and some are real high quality and others are not and price doesn't seem to necessarily reflect the quality.
he studied in the amy ,he was misinformed .and never cought on
Nice tip! Good trans kits gaskets have a few smaller holes in them to hold 4 or 5 bolts in place and locates everything. I was also taught to use a little white grease to hold stuff in place
Fire up some Ramen and sip a survival water and let the Wizard make you feel alive again for the next 17:41. .
My uncle taught me the same technique that you used for tightening the bolts on the transmission pan years ago. I've used that technique on transmission pans, oil pans and valve cover gaskets over the years. I smiled like a fat kid in a bakery when you did that because I thought it was just his way of doing it.
For the gasket I always used weatherstrip adhesive. Works great
Great tip with the super glue never heard that before I've been working on cars for 40 years thanks
Very informative, really enjoyed watching this. You do a great job explaining the procedure. I have a 1996 Ford F 150 currently in a shop having this exact job being performed. Wish I could have done it myself after watching your video. Thanks for sharing your expertise, much appreciated.
I am in lockdown, watching lots of youtube. Love your style of video, and your calm and relaxed nature. It's hard to imagine you getting angry! Your videos help me a lot, they inspire me to do more jobs myself and to do them properly first time.. thank you so much.
Thanks for the super glue tip! Tried it tonight works great!!
Dang I’ve worked on a ton of these back then and still love them
Thank you for sharing and reminding me of the good days in shop 😊
Great vid - thanks Car Wizard and Mrs Wizard
While I had my pan off on my 97 dodge 12 valve I drilled a hole in it at the lowest point and weld on a nut on outside and used bold and copper washer and now I can drain my fluid easy. Very happy! Just make sure bolt don’t go past bottom of pan.
Pretty cool wizard. I was taught to use a small amount of grease on the gasket to do the same basic thing, hold everything in place during install
Nice video wizard! Keep more mechanic videos coming. Diagnosis and of course the best are honest mistakes that we all make and how to fix em
I really enjoy your videos!! Thanks for the great content!!
Yup. Enjoy the mechanic work. Good job Wizard.
A very good instructional video for a novice like myself. Thank you sir!
Probably the most calming thing I’ve watched since coronavirus started. The Wizard is truly a gift, can’t wait to watch more
My first car was a 1973 Chrevrolet Malibu with a 350 mated to a 350 Turbo Hydramatic transmission (bitchin' name, good job GM marketing!) It was my grandmother's car, and when I bought it from her in 1985 for the token amount of $200, it had all of 48K miles on it. However, it had been parked outside in Texas for years, the paint was faded the vinyl top was cracked and the seats and plastic fantastic interior was all cracked faded and rotten. GM quality for ya right there.
Anyhoo - funny thing about the 350 Turbo transmissions from that generation: They had a design flaw and the 2nd gear band tends to strip out around 60K miles. When that happens you lose 2nd gear and the car then shifts from low to high: Your 3 speed is now a 2 speed.
Coincidentally, I had a B&M shift kit I had been meaning to install on the car but it was way too intimidating a job for a 16 year old kid to do in the driveway. Had I installed it and then the design flaw had reared its ugly head I would be telling everyone to this day all about how a B&M shift kit will destroy your transmission.
As it was, I got it repaired and had the transmission shop install the kit for me. I had them set the full throttle shift for 5K RPM (as it had been from the factory.) The car would scratch the tires going into 2nd. Fun times.
I love this channel ....keep them videos coming!
I truly appreciate your time and effort making your videos. It's very nice of you to try to help others. GBYAY.....Kenny in Vegas
I gave this five stars despite using a different technique. If you are installing an old Brit or American cork gasket, I would recommend using Hylomar on the pan side and Loctite 515 or 518 on the motor side of the gasket. The super glue works for him and I have never tried that. My method seals some pretty crude cork gaskets, and when you pull the gasket off, the Loctite stays with the gasket. Priceless. This is also the old school high dollar method used on older aircraft. If you are installing a rubber gasket maybe his way works better.
Well thought out. Thank you sir for sharing.
You post this a day after I replaced the oil pan gasket on my 88' Volvo 740. Easy job, a lot to remove. Great video by the way wizard!
Superglue, flip, weight, and wait ... the sorcery of the Wizard! Thank You
Working on couple different cars. One oil pan bolt was extremely difficult to remove and even more difficult to install. That one bolt was above a steel member with no room for a short socket. Had to grind off a large portion to make the socket shorter and thinner to fit just catching that bolt at an angle. Install is another problem, since that bolt was fully out there is no room for the modified socket to fit no matter how short. Couple hours of cursing dropping that blot more than a dozen times, kid you not, then add insult to injury they send me the wrong gasket and filter. Working on another car, oil pan was glued in, won't budge using a mallet and prybar. What fun working on my back outside, 105° F. Always something, always a challenge. Super glue trick is pretty good, not sure I have the courage jacking up the engine.
Man I love this guy. So humble and intelligent.
You're a great guy, I enjoy your content! Thanks!
Thanks Wizard, very thoughtful to help keep our minds off the umm you know what! Stay safe.
I like doing things simple and smart. Can't wait to do super glue trick. Thank you for this video.
This is awesome, now I can go do my transmission pan
Good idea. My dad always used 3M super weatherstripping adhesive. I'll do it this way in future.
I have always used super tacky red gasket adhesive on my pan gasket. Way back when, I used thread to tie though each hole . Then after getting the bolt started I could snip the thread and pull. My first attempt installing a pan gasket was using the black sealant and the gasket would roll up and curl. Super glue is the new wonder stuff. I had to replace too many cork gaskets simply because they would spin from the bolt and rip the gasket causing a leak, then you had to start all over again with a new gasket. I learned how to take it easy on the gasket after that.
This is actually a great video because i'll be doing this same job on my 1977 Oldsmobile Cutlass Supreme in the next few weeks!
Excellent teaching . 👏
That's funny. I felt like I was being a janky amateur when I got frustrated with the gasket slipping all the time and I carefully put a tiny drop of superglue on each outside corner, using a magnifying glass to make sure it was only touching the outside surfaces. Then I see the Wizard going completely HAM with it. OK then.
I've been using RTV for years to do that. Never thought of trying superglue.
The next guy to do yours won't have much issue.
The next guy to reseal the Wizards is going to spend an hour cleaning superglue and gasket off the pan.
12:00
My personal experience with those rubber gaskets is that they are way more expensive than cork, last maybe a little longer, then begin leaking, and they stick to the surface like hell.
Went back to cork, no problems ever since.
Might as well say "fuckit" and just use a bead of black RTV sealant, like an oil pan, really.
Thanks Caprifreak - I'm about to flush my E40D transmission and decided to use a cork gasket. I noticed that there is NO ATV or other sealants used! Just the cork and a small sealant to keep the bolt holes in place.
Any advice? 10-12 foot pounds on tightening the pan. Seems real light.
Your new lifts look seriously solid, the arms are confidence inspiringly thick!
I put a little bit of RTV on the cork gasket and did the same thing, I think super glue is probably a better bet though cause it will dry much faster and hold better. Thanks for the tip!
Thanks Car Wizard!
I have done this kind of job in the 60s. did not have super glue or fancy gaskets. used very small string to tie the gasket through every other hole and out. small string can be cut and removed or just left. like today never over tighten the bolts. it can also deform the pan as well as ruin the gasket. if you are a bit to loose the gasket will seep. just tighten a bit more. helpful video.
Excellent video!
Been fighting a leaky trans pan for quite awhile on my Wagoneer. I will try this. Thank you wizard
I use the same method with the gasket but I also hand screw two headless bolts into the unit to use as guide bolts. Works real well
Not related but I’ve changed gear box on 83 f150 twice w/rebuilt motor craft.Has new power steering pump and new lines. Looks like it’s combining out the bottom of gear box.
Thanks! Love your videos.
Thanks for the video. Beautiful truck. Considering restoring one from the farm graveyard. Has a broken parking pawl and it’s rusted through in many spots.
Thank you for this!
I wanted to see you add the fluid and start her up and all that good stuff
Thanks for the content. Please stay safe.
If it's on original fluids..the rear diff is going to be Whale Oil..that stuff smells horrible
That truck was one model year away from getting DEXRON(B) which also had sperm whale oil!
@no candy Am I the only one who thinks old diff fluid smells exactly like sweaty gym socks?
Very nice video. The camera framing & pacing is excellent
Good video. I changed the the trans pan gasket on a car I'm fixing up. The car sat in the same spot for two months and there was a big pool of transmission fluid under the car that had leaked out.I Just got another gasket and will be more careful with the bolt torque next time.
Back when cars had a lot of thick paper gaskets I used Permatex # 2. Was economical and used many tubes of it. Kept a small bottle of rubbing alcohol to clean hands & tools.
Thank You, Like the truck, I had a '75 C-20.
I’ve did the same super glue trick for other things as well
Best trick !
I remember this trick Mr Wizard we used used to this as well when we would do transmission services back in the 1990's at Carver's Amoco in Illinois
Thanks Wiz. I appreciate the tips. I'm gobsmacked at the knowledge that you've accumulated and are willing to share. We are all dying at home in Lockdown. Can you please start working on the old girl with the Rolls Engine? We are all dying for content.
Excellent video, I also use some blue locktite in some bolts threads.
Thank you Wizard!
Never thought to use super glue on a gasket. Thanks for the tip.
I use a dab on tiny screws when repairing computers. Keeps the screw on the screwdriver when you have to reach down in to put in the screw.
@@DarthVader1977 That's what magnetized screwdrivers and bits are for.
@@kw9849 I guess you've never seen a plastic screw.
Do a video series like this for general repairs , that is SUPER helpful .... I had do to a fuel pump on an old 80s jeep and the biggest pain was the gasket kept falling off !
It's outrageous that the fluid is that old!! Amazing truck, seeing one that nice is a rare sight, in the 2 tone 70's color, even rarer.
Liked most of the video, good job.
The bolt holes in the gasket are designed slightly smaller than the bolt diameter so you can use the bolts as alignment pins to hold the gasket in place with no adhesives never use sealants on trans pans the sealant can over time break off a small piece on the inside and get jammed up in the valve body I learned this back in auto mechanic trade school.
Wizard bless you for the public service you are doing. I have enough food supplies especially a Costco hubcap size cinnamon lattice Apple pie, 3 containers of ice cream and now more of your videos yeah!!🤗
"It's gonna be a messy job" .... Cue Mrs. Wizard takes a couple of steps back :)
Excellent videos
Good to change the dipstick seal also
Thanks man. Been lurking and watching so now ya have a new subscriber. I like yer style and straitforwardness. (Is that really a word?)... anyway. Keep doin these good vids.
This literally just happened to my 73 C25. Great video
My wife and I both have had old trucks she prefers her 79 Chevy. I got that one for $50 back in the mid-80s it did have a blown head gasket six cylinder but I fix that and it ran for many years until the engine finally let loose and I put a V-8 in it when my son was going to high school that became the truck they used an auto shop and at that point my wife started her smaller vehicle phase. 93 blazer
Thanks David. I am considering doing this on my 2010 Honda Civic, it's a bit weepy...
Speaking of which, can I jack the front of the car from the front subframe just behind the radiator? I'm pretty new to mechanical work, would prefer not to bend major chassis components!
Thanks mate, we appreciate your efforts to put out more videos at the moment. Shooting, editing and releasing quality videos is no small task!
Why super glue? My dad was a mechanic most his life and he taught me the 3M weatherstrip adhesive trick. Of course back then there was no super glue. Great video, and thanks!
Super glue was invented in 1942
Awesome video btw
I usually extract the fluid through the dipstick tube before removing the pan. It helps if the fluid is warmed by driving.
FWIW, I prefer the felt filter as opposed to the nylon or brass screen b/c the surface area is much greater, the felt type filter is less prone to clogging due to this larger surface area.
Thank you .. you are Awesome .
Sir - when the world is crazy, I watch your videos and life is just better! Can you make videos of basic repairs on regular cars/trucks, including your hacks/advice? Things like changing out alternators, blower motors, wiring harnesses, and so on? Sure - other people make these videos. But as a teacher of more than 20 years, I see in you a great teacher. Take care and practice social distance!!