Every time I watch John work on a vehicle, he's so methodical about it; almost like he's doing a step-by-step with a photog around!😁 He seems like he's a great guy to do a build with. Thanks, John and Lucky for letting us hang out for a bit! P.S. The bed lift idea is GENIUS.✌️❤️🙂🇨🇦
I've tried both ways, and, since I'm in relatively rust-free Texas, I vote for set the bed behind the truck for this job. If you have four guys, this is simple. I have also seen a guy use an engine hoist to help pull one off. The only thing of note, if you don't want junk in your fuel, make certain that you clean off the top of the pump before you hit the ring off.
New Zealand is the same, gear shift knob, steering wheel even if you delete a seat. It has to have it noted in the registration and to do that you also have to have an engineers report in a lot of cases ($6,000 estimated to change a seat fixing) Then there is a build plate added to note the mode. I hope it's not that bad there yet, but it is probably not that far away. I am disabled, to modify a mini van. 😔To delete a seat and to and to add an arm that lifts the chair in and to stop it rolling around while driving, $15,000 for a 7 year old minivan ($6000 wholesale), a lift arm ( with 1 actuator) a new head to the radio and compliance (Engineers report and a plate). 😔
There are some great tools for those locking rings on the fuel tanks that make life much easier. I know I wish I'd have bought one many years earlier after getting one.
I let my 93 bed rest on the rear tires just enough to access the tank, i was able to pull it back of the cab about foot and a half.....i wish i had a lift!!
Only in the rust free states is it easier or feasible to remove the bed as opposed to removing the bed. I've been converted to this method since I moved to Arizona from the northeast.
"That's Sketchy",,throws the breaker. Once flew into Torrance Municipal in a 4 person Cessna, all the way from Wa State. Hair pullage flying right overtop of LAX landing pattern. Stilts McGann??, Stepside McGann?? . Nice fix. Thanks for the double download.
Had an old Mazda B2000 (200K miles) back in the 90's that failed smog test, went around the corner and turned the idle way down idle (approx. 300 rpm) and passed. Wonderful BIG GOVERMENT. Florida had emission, canceled emissions. NOW we are free !!!!
Lucky, seek a physical therapist who knows how to adjust ear crystals to attempt to cure vertigo. My wife had severe symptoms after a wreck and we found a PT who knows how to reseat crystals. After a 7-minute maneuver process, she was completely cured!
Brass is ok I guess, but a full tool set of bronze was what the government supplied for working on Titan 2 intercontinental ballistic missiles with atomic war heads . My big brother brought a bronze wrench home to my dad after he got stationed in a missile silo, after trying to avid being drafted into the submarine service, saying he was too claustrophobic to be so restricted.
1:38 I never knew how much I hated the valley or California in general until I move to Louisiana if your lights work, your horn, your wipers, and you have no check engine light on you’re good to go
Morning guys. New York State has emissions testing too but not as bad as California. They do check window tint as part of the inspection and now the police are enforcing loud music playing in your vehicle as well as ticketing bicycles, speed and red light cameras everywhere.
Love it when you two get together!
You haven't lived till you do that job on a northeast truck,it is usually a full weekend project 🙄😃
John's such a cool, easy going guy. Thanks for the vid Lucky ✌️
Every time I watch John work on a vehicle, he's so methodical about it; almost like he's doing a step-by-step with a photog around!😁 He seems like he's a great guy to do a build with. Thanks, John and Lucky for letting us hang out for a bit!
P.S. The bed lift idea is GENIUS.✌️❤️🙂🇨🇦
I've tried both ways, and, since I'm in relatively rust-free Texas, I vote for set the bed behind the truck for this job. If you have four guys, this is simple. I have also seen a guy use an engine hoist to help pull one off. The only thing of note, if you don't want junk in your fuel, make certain that you clean off the top of the pump before you hit the ring off.
Lifting the Pick-up Bed is the way to go. If you don't move the chassis, when you lower the Bed back down the bolt holes for the Bed will line up.
Hey Lucky, I’m a Chicago Cop and I love your show…shows!!
Dude!!! The 3link video was awesome!!! Harbor freight bed tool and a forklift last week on mine 94 c15 fuel pump!!! The originally Delco 265k✌️
I have a 2001 Chevy and my dad and I used his tractor with forks on the bucket to lift the bed and replaced the fuel pump.
New Zealand is the same, gear shift knob, steering wheel even if you delete a seat. It has to have it noted in the registration and to do that you also have to have an engineers report in a lot of cases ($6,000 estimated to change a seat fixing) Then there is a build plate added to note the mode. I hope it's not that bad there yet, but it is probably not that far away.
I am disabled, to modify a mini van. 😔To delete a seat and to and to add an arm that lifts the chair in and to stop it rolling around while driving, $15,000 for a 7 year old minivan ($6000 wholesale), a lift arm ( with 1 actuator) a new head to the radio and compliance (Engineers report and a plate). 😔
There are some great tools for those locking rings on the fuel tanks that make life much easier. I know I wish I'd have bought one many years earlier after getting one.
I live in rural Utah. We don't have emissions, and we recently got rid of safety inspections. I could cummins swap a bicycle, and nobody would care
How about calling it the Ty-Foolin’”. Ode to Def Leppard there! Nice work guys. Thanks for letting us hang out with you for a while!
I like that
Dynamic Duo!👍🏻😀
I have a 67 Mercury Cougar that was originally sold in California and had smog gear on it like an air injection pump.
I let my 93 bed rest on the rear tires just enough to access the tank, i was able to pull it back of the cab about foot and a half.....i wish i had a lift!!
Only in the rust free states is it easier or feasible to remove the bed as opposed to removing the bed. I've been converted to this method since I moved to Arizona from the northeast.
"That's Sketchy",,throws the breaker. Once flew into Torrance Municipal in a 4 person Cessna, all the way from Wa State. Hair pullage flying right overtop of LAX landing pattern. Stilts McGann??, Stepside McGann?? . Nice fix. Thanks for the double download.
Like the power switch for the lift. Glad you found the parts for the Typhoon 🌀. John Mcgann truck nice project.
Thanks 👍
Heck heah that typhoon is awesome! Great video!!!!!
Thanks 👍
411: Sportsmachines makes an 18" version of the SYTY wheel if you want to keep the stock look.
Great job guys thanks for video yep customers cars we hear you 👍
Thanks 👍
Great to have a buddy that has everything you need, guess that's you Lucky 👍
Had an old Mazda B2000 (200K miles) back in the 90's that failed smog test, went around the corner and turned the idle way down idle (approx. 300 rpm) and passed. Wonderful BIG GOVERMENT. Florida had emission, canceled emissions. NOW we are free !!!!
Thanks for sharing a day in Lucky’s garage with us. 😀🇺🇸
You bet!
Bed lift works great - as long as you do not have a crew cab! Learned that the hard way😪
Ohh no
SMOG is 75 up for domestic, 76 up for imports. Which coincides with the first cataclysmic converters on each. FWIW
Man how nice it is to have no rust on a 1993.
If you tried that with my 2015 the bed rails wood fold in if someone put something on top of the rails it dents its made from o to thin.
In Northern Michigan, the hillbillies just cut a hole in the box to change fuel pumps. Throw the bedliner back in and go!!
Love the typhoon I am doing a syty engine swap in my 88s10 mini truck because CA smog love the content thanks Lucky
What the heck.? Two videos in two days. Lucky you have got to pace yourself. Remember you have a Doctors note. 6=8.
Those little roll around stools are awesome
I live in torrance and I just put a ls in a 07 bmw wagon…….. don’t tell the state of comufornia!
Lucky!! Build a new shop in Reno. No state tax and smog is easier…
What was that black stuff on the frame of that 93? Oh it still has paint on it, the joy of not living in the rust belt 😅
Keeping it real
Lucky, seek a physical therapist who knows how to adjust ear crystals to attempt to cure vertigo. My wife had severe symptoms after a wreck and we found a PT who knows how to reseat crystals. After a 7-minute maneuver process, she was completely cured!
Great fun 🎉
Good times
Brass is ok I guess, but a full tool set of bronze was what the government supplied for working on Titan 2 intercontinental ballistic missiles with atomic war heads . My big brother brought a bronze wrench home to my dad after he got stationed in a missile silo, after trying to avid being drafted into the submarine service, saying he was too claustrophobic to be so restricted.
Lucky, just a great time when you and John team up for a video.Diggin on the Typhoon, is this the one from HRG?🤓
No. I bought the parts typhoon from the guy and put it back together 👊
Gotcha.👍@@luckysgarageshow
A door in the bed floor works.
what ever happened to Tony A, you two were great together
Ford has torx from the top
The breakfast spot that was the former Broii-Hut, across the street from the library that used to be a fire station?
OSHA approved 😂😂😂
what tire and wheel set up are you running
Remember children always make sure that you dress all punches and chisels for Safety. ❤ 12:28
How much for your c10?
What is beeping in the shop?
You got an intro now luck
1:38 I never knew how much I hated the valley or California in general until I move to Louisiana if your lights work, your horn, your wipers, and you have no check engine light on you’re good to go
Love it, Commiefornia. Lol
Kommiefornia
Morning guys. New York State has emissions testing too but not as bad as California. They do check window tint as part of the inspection and now the police are enforcing loud music playing in your vehicle as well as ticketing bicycles, speed and red light cameras everywhere.
🇺🇸🫡👍
I don't know why you people stay in California.
Move to another state! Leave the people’s republic of California.
Will you Puuuuullllllllllease hook up a switch "ON" the lift itself?!?!?!?!?!?!?!?!? Love the show!!!!!!!
PLEASE KEEP THE RIMS ON THE TYPHOON IT IS PART OF THAT MAKES THAT CAR A COOL PACKAGE AND NOT A BLAZER