Yeah man I think central heating and air equipment has that well established efficiency wise for sure communicating systems are awesome you just need to design the equipment under manufacture specs as best as possible...
About to install my 60 Ft. 1/3 HP 3 gal chiller I got from Rapids. Wouldn't it be better to tee off the glycol line in the walk-in and supply the 2 separate supply and return lines (for a 12 product trunk line) making a parallel system rather than connecting them in a chain and doubling your linear feet only to have the second run warmer than the first? The end result is probably the same resistance on the chiller pump but you're supplying the two lines with cold glycol rather than one cold and one somewhat cold. Please advise.
If you were coming off of the chiller with a ½” line then splitting with a Y- or T-fitting I would completely agree. But since the line coming off of the chiller is also a 3/8” line, all you end up with is (2) 3/8” lines each having a weaker flow than the main and therefore less cooling potential. I would 100% agree with splitting the line if we were working with one of the larger chillers that have the bigger circulation pumps. Then we could stick a PP291 glycol Y into the pump in place of the regular barb and feed both supply’s in the trunk simultaneously. Unfortunately the 60’ unit (3K185) is manufactured with a different pump that makes this almost impossible. If the series connection concerns them, you can always try adjusting the temperature down an extra degree or two and check the temp on the return line to make sure everything is staying cold. Thanks! Ben Wieser | Draft Tech/Inside Sales Rapids Wholesale Equipment 6201 South Gateway Drive | Marion, IA 52302 p. (319)447-3504; 800-676-0612 ext 3504 f. (319)447-1680; 800-858-0327 | Click to Chat ben.wieser@rapidswholesale.com | www.rapidswholesale.com P.S. "i mean, if they are running 12 prod trunk less than 30' it should be fine." - Ben
Hello Haywood D. Water consumption will vary depending on the ratio of glycol to water each manufacturer recommends for each individual unit AND how much solution is required to fill the chiller and pack the glycol lines which vary in length. Hope that helps!
What you’re calling the evaporator is actually the condenser and condenser fan, the copper coil that is inside the glycol tank is the evaporator.
The guy did well, if you're not a pro then that's your mistake to learn from.
First thing I did when I seen them call the condenser a evap is look at the comments lol
"Evaporator fan" on a condenser and refrigerant directly from the compressor in the glycol. Gonna have some real warm beer.
what is the lowest possible cooling temperature for the return of the glycol?
Do you sell units that have both hot and cold loops? I wouldn’t be using it for beer chillin but a Mobile residential HVACR application
Could you clear something up for me please. Would a two line cooler. Chill two separate kegs?
What compositions normally do you use for glycol coolants? Does it only contain glycol
2.5 parts water, 1 part propylene glycol
Cool , thanks for video explanation ;)
I want to design this solution for my home however thinking about how much energy it will consumed compare to using many AC
Yeah man I think central heating and air equipment has that well established efficiency wise for sure communicating systems are awesome you just need to design the equipment under manufacture specs as best as possible...
About to install my 60 Ft. 1/3 HP 3 gal chiller I got from Rapids. Wouldn't it be better to tee off the glycol line in the walk-in and supply the 2 separate supply and return lines (for a 12 product trunk line) making a parallel system rather than connecting them in a chain and doubling your linear feet only to have the second run warmer than the first? The end result is probably the same resistance on the chiller pump but you're supplying the two lines with cold glycol rather than one cold and one somewhat cold. Please advise.
Hey Darryl, I'm picking Ben's big beer brain to see what the drawback to your proposal might be. Stay tuned or give him a buzz 1-800-472-7431.
If you were coming off of the chiller with a ½” line then splitting with a Y- or T-fitting I would completely agree. But since the line coming off of the chiller is also a 3/8” line, all you end up with is (2) 3/8” lines each having a weaker flow than the main and therefore less cooling potential. I would 100% agree with splitting the line if we were working with one of the larger chillers that have the bigger circulation pumps. Then we could stick a PP291 glycol Y into the pump in place of the regular barb and feed both supply’s in the trunk simultaneously. Unfortunately the 60’ unit (3K185) is manufactured with a different pump that makes this almost impossible. If the series connection concerns them, you can always try adjusting the temperature down an extra degree or two and check the temp on the return line to make sure everything is staying cold.
Thanks!
Ben Wieser | Draft Tech/Inside Sales
Rapids Wholesale Equipment
6201 South Gateway Drive | Marion, IA 52302
p. (319)447-3504; 800-676-0612 ext 3504 f. (319)447-1680; 800-858-0327 | Click to Chat
ben.wieser@rapidswholesale.com | www.rapidswholesale.com
P.S. "i mean, if they are running 12 prod trunk less than 30' it should be fine." - Ben
What is the type of glycol require in beverage chiller ?
We suggest propylene glycol like the glycol found here: rapidswholesale.com/glycol-solution-5-gallon.html
I have a ubc glycol chiller that is not working properly
Why is the pump always running?
Could this be applied to a water cooled ice cream batch freezer?
So, what cools the glycol bath?
The refrigerant in the copper tubes, he mentioned early in the video
If we decrease temperature -2 degree Celsius
How much water do it use
Hello Haywood D. Water consumption will vary depending on the ratio of glycol to water each manufacturer recommends for each individual unit AND how much solution is required to fill the chiller and pack the glycol lines which vary in length. Hope that helps!
what kinda walk in cant handle weight