New 3.0 MerCruiser Carburetor

Поділитися
Вставка
  • Опубліковано 29 сер 2024

КОМЕНТАРІ • 27

  • @barry.anderberg
    @barry.anderberg 2 роки тому +2

    National Carburetor out of Jacksonville, FL sells new carbs for this engine for $271 plus shipping which for me was like $20

  • @bxbmbr766
    @bxbmbr766 Рік тому

    New subscriber thanks for the vid!

  • @laurentmoser
    @laurentmoser Рік тому

    Ciao ! Ottimo video!😊dove lo hai ordinato?

  • @robertpaul6257
    @robertpaul6257 2 роки тому

    Great video however I always disconnect the battery before I work on any fuel system!

    • @asc37net
      @asc37net  2 роки тому +2

      I never had a problem with Sparks. I disconnect the battery when I work on the electrical system. I don't think it would be a problem changing the curb but the battery connected. But it is good practice to disconnect the battery before doing anything

    • @robertpaul6257
      @robertpaul6257 2 роки тому +1

      @@asc37net Yep! Absolutely! I was working on the fuel pump as well! If your boat it the garage of your house it could be a bad day in one second! Don't want to have to explain the house burning up to the wife!!🤣🤣😂

  • @moraleshvac
    @moraleshvac 3 місяці тому

    Do you know why I don’t get any gasoline in to my carb ? I already change the fuel pump and still don’t get any gasoline?

  • @bruhman1634
    @bruhman1634 3 роки тому +1

    Any updates on how it’s running? I have a 2002 alpha one 3L carb that is giving me problems starting and stutters when i go to accelerate. I’ve had it cleaned and it ran ok for a season and now back to having trouble starting and it idles rough too. I was wondering if this company was the way to go? How’s the carb running now?

    • @asc37net
      @asc37net  3 роки тому +1

      It runs great with new carburetor on it. I just had to do a little adjustment to it.

    • @asc37net
      @asc37net  3 роки тому +1

      And I did notice a big difference in its running after I bought the carburetor.

    • @bruhman1634
      @bruhman1634 3 роки тому

      Anyway to do a video on how you adjusted it to fine tune it after installing it? I’m going to order one this wknd i think and will install it when it comes in.

    • @asc37net
      @asc37net  3 роки тому

      I will at some point I'm getting ready to move. To Florida. That's the reason I haven't made any videos yet. Things been really busy.

  • @luisnavarro3280
    @luisnavarro3280 2 роки тому

    Having problems with mine not planing

  • @user-it6xj2zm4v
    @user-it6xj2zm4v Рік тому

    Здравствуйте! Подскажите пожалуйста диаметр жиклёрок в карбюраторе меркрузер 3.0 ?

  • @shananmohatt
    @shananmohatt Рік тому

    What's the mode number Im sure it’s the same one?

  • @robchiste3638
    @robchiste3638 2 роки тому

    Once installed and running did you have to tune the carb?

    • @asc37net
      @asc37net  2 роки тому +1

      It was all set right out of the box

  • @djflashlinx5150
    @djflashlinx5150 3 роки тому

    Did you have accelerator pump issues with the old one?

    • @asc37net
      @asc37net  3 роки тому

      No it was ok. Cab was plug up. And I couldn't get cleaned out.

    • @asc37net
      @asc37net  3 роки тому

      No the carburetor was plugged. I've cleaned it out and it still wouldn't run right

  • @Arcturian1111
    @Arcturian1111 Рік тому

    Is this a Chinese spinoff model?

    • @asc37net
      @asc37net  Рік тому +1

      No its not it is a company in the USA

  • @alexval2464
    @alexval2464 3 роки тому

    so how it came out, runs better?

    • @asc37net
      @asc37net  3 роки тому

      Yes it runs a lot better. About mid summer I just barely got it off the lake because the cab was so bad. Late fall I found a carburetor. It ran beautiful on land. Before I head to winterize it. This spring I'm going to put the boat back in the water to give it a good run to see how it is.

  • @luisnavarro3280
    @luisnavarro3280 2 роки тому

    What was it doing ?

    • @asc37net
      @asc37net  2 роки тому

      It wasn't run right at idle. And couldn't adjust the mixture screws they wouldn't do anything even after cleaning it.