Nissan Frontier Video 10: Rough Country lift
Вставка
- Опубліковано 9 лип 2024
- In this video I install a simple spacer and shackle lift kit on the 2019 Nissan Frontier.
Lift kit:
amzn.to/35QJiLr
Video 1: Installing a power tailgate lock:
• Nissan Frontier build ...
Video 2: Protech headache rack
• Nissan Frontier build ...
Video 3: Decked storage system
• Nissan Frontier build ...
Video 4: Tie Down Rails
• Nissan Frontier build ...
Video 5:
• Nissan Frontier build ...
Video 6: Onboard air
• Nissan Frontier build ...
Video 7: fender repair and starting the winch bumper
• Nissan Frontier build ...
Video 8: finishing the winch bumper
• Nissan Frontier Build ...
Video 9: wiring up the lights
• Nissan Frontier build ...
Video 10: Installing a 2.5" lift kit
• Nissan Frontier Video ...
Video 11: installing wireless winch controls, a folding antenna mount and 1kw inverter
• Nissan Frontier Video ...
Video 12: Replacing the backup lights with LED
• Nissan Frontier Video ... - Авто та транспорт
quite simple but i like the detailing of the process. very enjoyable watch
Straight and clear and to the point. Excellent video for someone like my self that will always give it a try, just need what you delivered.
Best video out there for this project. You have the tools and the experience. There are other videos where they work on this way past dark, ha.
Looks great. 👍
Awesome !! This is a very very helpful video
Great video
I just completed the rear shackles on my 2008 Nissan Frontier. Here is just a helpful hint. You won't need to use a pry bar if you remove the shocks.
Is it hard to put the shocks backs after?
Nice video thanks
had to look twice. I measured and there is a significant height distance at the front. Nice. I have a 2.5 lift. actual is 2" when I checked the manufacture. 2" in the rear which leaves the back still 1" higher than the front.
Ve got the same kit I really need to install it also got UCa’s and cam bolts
I'll have a nisssan frontier 2018 to . And I try to do to many changes like you
I did check the tire clearance. and your tire can be 75. I have 265x70x16 and there is a lot of room all around especially height.
However I found out about titan swap. I'm working on that now. there is some added costs but not that much.
i had legitimate fear for my face and your fingers when you were levering that spring!
Do you have stock size 265/70r16 tires or did you go with 265/75’s? Those wranglers look good
I wonder why they went with shackles instead of blocks in the rear ?
Have the kit and a 2012 RWD apprehensive to change the truck- concern is the "coil bucket" contact and detracting from handling: don't want to find out UCAs are al$o needed.
Two years later. Have the UCAs been making contact with the coil buckets? Did you have to change them? I'm looking to do that now.
What front bumper is that and how much?
What is the kit that you used to lift up the nesan frontier.
Does the kit work on the Desert Runner?
How did you drop your sway bar??
What size are the duratracs? 70 or 75?
Any interference issues with the upper control arm and the tower with the spacers. Ive been told not to use lift spacers cause of the interference at full droop.
Where'd you get that fromt bumper?
Any issues with coil bucket contact?
I have a question about do not have to remplace the control Arm because I have a Nissan to but I lifted and make to much noise
No issues with coil-bucket contact? I've read content about how just spacer lifts cause coil-bucket contact due to wheel travel.
How much should all that cost? To get done at a shop?
What size tires do you have?
Nice should of taken off the swaybar end links on both sides and rotated the bar down you would have alot of room to add spacers or put lifted shock and spring
Will this work on the pro4x.- 2012
You may want to look at springs in addition to the spacers.
I just built a front-mount receiver that's concealed within the factory bumper for my '15, it's heavy enough t take around a quarter inch off my ride height. When I put the winch on a slide-in mount into the receiver I'm down somewhere between 3/4" and 1" from stock.
Still haven't settled on what springs I'm going to go with, or what shocks. If I go sort of OE, R51 Nissan Pathfinders had an optional V8, and the front coils were a little bit longer than the factory V6 coils common to both the Pathfinder and the Frontier. They're a possible contender.
I'm also looking at aftermarket springs, but haven't yet evaluated shock travel into the equation. I wouldn't mind gaining around an inch of extra height over the stock ride height pre-changes but I don't want to go too crazy.
Check alldogs they have all kinds of lifts shocks and springs
what I wonder about with the "In addition to" part...it seems like a spacer is going to compress the spring. If you get stiffer springs on top of the spacer compression, wouldn't the truck feel like you're riding on rocks? Wouldn't be better if you need stiffer springs just to get springs and better shocks and ditch the spacer? Just asking.
@@mp-ot7fw Spacer doesn't compress the spring. The spacer lifts the vehicle up relative to the spacer. The spacer goes above the tophat on the strut.
@@TWX1138 You are correct, I am wrong. Sorry and good catch.
What size are those tires?
Did you buy the truck with the front bumper or did you buy/make it?
Thanks for the video. Did you notice much change in the ride after installing the lift?
Nope, pretty much the same as stock. Steering wandered a bit until I got it in for an alignment, but once that was done it feels just like stock.
I got the actual leveling kit and I couldn’t get an alignment without changing my camber bolts to adjustable ones
Good vid. I've only seen 2 other videos on this kit. I have mine arriving tomorrow for my 17. Should I have bought the cam bolts? The longer ones? Some people say yes and some say no. Kinda wish I had a place here in middle TN that I could rent a lift stall for half a day...lol.
Did you buy cam bolts? What are those for? Thanks
@@armandoarroyo I ended up selling the frontier in 2022. I ended up not needing them. The dealer said there was no issue with them stock ones. I would say if you want to buy them just to make sure then go ahead and get them just in case you need them. Every place requires something different. It’s mainly for alignment purposes if I remember correctly. Sometimes with some kits the stock bolts aren’t long enough.
@@thehuntingparadox2291 I’ll get the RG 2.5 lift kit, I’m not buying them. Thanks
Why not just remove the hangers and bend the stock one back or just get a new cat back?
Thanks for all the info, by the way can you tell me what kind of bumper that is for my Nissan frontier 2016
He built it from scratch, check out his other videos 🙂
@@Iann128 thanks I'll check them out.
Hey I just installed the Supreme suspensions 3/2" kit which is very similar to the RC kit. However, the rear shackles didnt give me the full 2 inches in lift (only about a half inch - 1) and appeared to almost instantly cause my leaf springs to start forming a "W" instead of the arch they had before. Now my truck is borderline "squatting" and i cant seem to find any help online as to WHY the rear shackles didnt work as they should. Im considering removing the shackles and reinstalling my OEM shackles to preserve the life of my leafsprings and going the AAL route.
Supreme changed their lift kit and replaced the shackles with blocks that fit between the axle and the leaf springs. Doesn't mess with the springs that way and you get the full 2" out of it.
Hey Matt, I also use my Frontier for forestry work and need to lift the front up a little - I have airbags in the rear. Do you get any coil bucket contact with the spacers? I ask because you and I are probably driving similar speeds on similar roads. Any help is appreciated. Cheers
I have had no issues with the front spacers, and have around 20,000 miles on gravel roads since I installed them.
So how does it ride and would you recommend this kit for a daily driver who wants to add trail capability? (Obviously not rock crawling)
Yes
Just wondering if you need to change the rear shocks for longer ones ?
No!
Did you run into any coil bucket contact with these spacers?
Nope. They're clear of the buckets
How’s it held up in the past year
Rough country says that the exhaust can get in the way
At 10:54 my sway bar on my frontier the bolt behind the one you drilled out rotates with the front. How do you fix this problem to where the boot will come out?
Bolt*
Was Cam bolts needed to get the alignment back in spec?
Anything after 2012 Shouldn't need those they are already there.
Previous models you would have to buy them and put them in yourself no longer!
@@tommypearson9260 not true, they are only on 05’s. Any that weren’t aligned to spec got them, so maybe 5%.
Just did the same kit. Purchased adjustable camber bolts. Not needed. Only the toe was out. After alignment, zero issues. 2021 SV 4x4
Just FYI i cut my exhaust just short of the Axel and made it a downpipe.
All to fit my 35 inch spare on the bottom lol ua-cam.com/video/EebbpEvn_WQ/v-deo.html Downpipe
Also this is the way it was first cut until i re-cut to adjust ua-cam.com/video/vWAHSjm4Tzw/v-deo.html
You sold the sidekick?? Bummer..
I did; I went an entire year and only took it on one off road trip. I was letting one of my employees use it for work, but it really wasn't ideal for that. Just didn't make sense to keep it if I was too busy to use it. This truck takes its place for work and the occasional overland trip, and I bought a 2nd frontier for my son to drive.
What's your call sign?
KE7RKL
@@MattVerley W4IHC
@@MattVerley where'd you get that bumper
@@TheNiuhuskies09 I built it...its in my previous videos
12:40
Nice video but I'd never go rough country. Way over priced for a couple blocks of aluminum and couple of plates of metal.
I paid right around 30 dollars for my no name spacer kit online. My spacers have held up great for the past 8 months. I haven't had to re tighten them or make any other adjustments so far.
All dogs off-road check their lift kit out
You sure skipped a bunch. Lol
How was the ride compared to factory?