Nissan Frontier Exhaust Shootout!!
Вставка
- Опубліковано 27 лип 2024
- Looking for the best Nissan Frontier exhaust? Look no further than Z1 Off-Road
www.z1offroad.com/exhaust/cat...
Since the original release of this video when we identified the benchmark targets (performance, sound, material quality & fitment) and our engineers went to work. We released the ultimate Frontier exhaust in October of 2022, it is built to a grade higher than any of the exhausts we tested, makes more power, sounds great without compromise and bolts on without fabrication. Be sure to check out the full details in the links below.
The Ultimate Frontier Exhaust for your 3.8 or 4.0L models is now available.
www.z1offroad.com/exhaust/cat...
2022+ Exhaust Sound Clips
• Z1 Off-Road 2022+ Niss...
2005-2021 Exhaust About video
• 2005-2021 Nissan Front...
---
In spring of 2021 we reviewed the top Nissan Frontier Exhaust upgrades! See how they come packaged, install, sound, and perform in this video. We give you our unbiased feedback. @Z1 Off-Road we're committed to being your #1 resource for Nissan or Infiniti parts. We believe that means more than just getting you the right parts quickly and accurately, it means backing it up with expert advice and support. No matter what you're looking for find it at www.z1offroad.com
00:00 Intro
01:48 Stock
03:22 Borla
07:47 Magnaflow
12:58 Gibson
17:26 MBRP
21:37 Banks Power
28:28 Nismo
32:39 Review
About the truck:
2017 Nissan Frontier SV 4X4
2.5" Lift kit
285/75R16 tires
Uprev Tune (for previously installed drop in filter)
**Test performed with stock air box and stock air filter
#nissanfrontier,#frontierexhaust,#nissanfrontierperformance,#VQ40exhaust,#vq40 #nissanfrontier,#frontierupgrade,#frontierupgrades,#nissanperformance,#nissanupgrades,#nissantuning,#nissantitan,#nissanxterra,#nissanarmada,#nissanpathfinder,#infinitiQX56,#D40,#R51,#N50,#TA60,#A60,#A61,#Y62,#Z62,#Nissanxterraperformance,#nissanxterraupgrades,#nissantitanperformance,#nissantitanupgrades,#nissanarmadaupgrades,#nissanpathfinderupgrades,#nissanparts,#bestfrontierexhaust,#z1offroad,#z1motorsports - Авто та транспорт
What product/vehicle would you like to see us test next?!
literally anything for the R51 Pathfinder please 🙏🏻
Pedal controllers and flash tuners would be nice. Do any actually fix the WOT limit, etc.
@@motorradventures3323 The idrive is legit! www.z1offroad.com/idrive-usa-m-487.html
I would love to see a portable compressor shootout, there are dozens on the market with a huge price range.
do some headers
Glad to see you guys doing frontiers. In my opinion they’re just as good as any other truck and last just as long. People need to start giving these trucks a try, specially the 2022 and up models great trucks !
I am very impressed how the 2wd Frontier drives and handles on asphalt. I am sure it is exceptional off-road. It is a solid mid-size truck. Also the body lines are simple. I prefer the Frontier rather than the over priced and tacky Tacoma.
@@mushroomtip241 nice 👍
The Xterra to, hands down one of the best trucks I have owed.
I have a 2019 and I love mine
Love my 2017 👌
I would have been interested in seeing the aFE cat back exhaust. I really appreciate these tests because I own a 2019 Frontier SV 4x4 and there is not a lot of information out on UA-cam about aftermarket parts. Thank you Z1 off-road. 👍
Yes, definitely the full exhaust system from Afe and the dynos of the intake manifold spacers.
That mbrp sounded amazing
Bought it based on this review, mine drones and is very raspy. Very disappointed.
@@travis9187 Did you buy the Installer Series (aluminized steel) or the XP Series (409 SS)?
@@traviswh installer
@@travis9187 How long ago did you purchase it, would you say? Just asking because the lower grade materials could effect the sound quality overtime.
@@traviswh it did it day one out of box been on since a few days before I posted...I have added 3 resonators to get rid of drone and it's still there. Worst decision.
Great vid.Ive been needing an exhaust for my nissan.You guys made the choice alot easier.Thanks.
I went with a dynomax ultra flo cat back 2.5 inch system. It was too loud and droney for my taste, so I swapped the ultra flo muffler out for the dynomax super turbo, and it actually sounds great. Cut way down on the drone, almost none. And it still has a good deep growl, just slightly louder than stock. I’m very happy with it.
The best video I have seen !!!! Real test and comprehensive and real !!!! Keep doing these type of videos guys
Thanks! Will do!
Thanks to this video I got the MBRP! Sounds amazing in person, exactly what I was looking for! Thank you
Glad we could help!
I’ve been running flowmasters on my 07 since 2013. I like the way it sounds but does drone while cruising but it’s a deeper sound. I’ve also been running K&N CAI since about 2010.
Great vid guys! I love my Nismo exhaust.
I like these videos alot. Very educational experience
This the Chanel for me keep up the good work :))👍
Loved the video! Favorite one is mbrp
That's a lot of work. Thank you
Not even on purpose I was looking at the Nismo Exhaust through Google and clicked the first link that wasn't an add. Then turned on UA-cam to look at the Exhaust get an idea of what it looked like and sounded like. Finished the video then realized I was on y'alls website... I think it was meant to be. Will be ordering from y'all once I get the funds. lol
It is interesting that none of these exhaust pop like mine does. My '11 4.0 manual with factory muffler would softly pop a little if I revved it to around 2k rpms and let off or when downshifting. I was going to get a Magnaflow but the small town shop I went to suggested some no name turbo style muffler. It now sounds good, a little like the Borla, and the popping is more pronounced. It's not annoying like a riced up car and mostly only does it when I want it to.
Great reviews. Thank you.
Purchased MBRP. Super easy to install and enjoy the feel. The drone is real but rather have performance over quiet. Only when at certain rpm and it goes away so not constant. I enjoy it for 2023 Frontier PRo 4x. Almost purchased new NISMO so this review came in handy.
I bought the mbrp some time back and havent put it on bc I want to get dyno numbers before and after to make sure about gains but am glad it's a good option.
I have the Banks intake and exhaust on my F-150 and have been very pleased with the results, easy to install and high quality.
I've chosen the Banks Power Monster Exhaust for my 2017 Pro4X 4.0L V6 (VQ-40) 6 Speed Manual transmission. I'm not after the good quality sounds of exhaust but I'm after the Torque and HP that the parts can give to my truck. My truck gained almost the same Torque and Power on his Dyno Result. I also have Volant Cold Air Intake in there and replaced my BullyDog GT with Pedal Commander. Nice goodies
Would you happen to have a part number for the exhaust you ordered? I can’t find it on the banks website or z1
Great video dyno comparison. Nismo results were a bit disappointing. I have the Banks but luckily mine was straight forward but I did have the extended cab and not the crew. Other than the numbers, the stock exhaust sounded really good
I ordered an ss mbrp moments after watching this... Thanks for a great unbiased review...
I think the price and numbers got me. Just put my order in as well. Hope the build quality is good.
MBRP also has a 10% off promo code with free shipping which makes cost nicer
I had the Magnaflow on my old Xterra. Fit like a glove. Crazy that you had to chop it up. Really interested in the AFE. Hope y’all can get one and test it. I like the high tuck.
Yea same the AFE was what I wanted to see.
Awesome video! I would like to know how the new 2020 Engine would sound with the same test. The difference in power when I added an exhaust system to my Toyota Tundra was awesome. Not so crazy about the six cylinder sound but love the power add to the wheels. Thanks for the video, good stuff👍
The Borla would likely be my choice because there's no highway drone but it sounds great on throttle and add a tiny bit of power. Although it could be a bit louder under acceleration. The Nismo would likely be my 2nd choice, even tho it saps a bit of power, because it sounds nice on throttle without any highway drone. The MBRP sounds and performs the best and I would consider it, but the drone would likely be too much for me.
Great video, thank you...
The Banks is the way to go. It’s been on my truck since 2010 on a lwb with a 6spd manual. The sound does change slightly after a few runs but in all coupled with a good cool air intake it does sound REALLY good..
I agree I’ve had two trucks with it and I love it with my age cold aor
Great info!! Thanks
Gran trabajo!!! Muchas gracias
great video. thanks a lot.
Thank you!!
MBRP really makes the overall best sense for me
How does this not have more views?!
Because there isn't a half naked girl on the thumbnail
I installed the Banks on my 2011 Pro4x and it fit Perfect bolted right up with no issues its a great product 🤙🏽
Does it feel shaky when doing 70+ miles? Or too loud?
@@alansoriano9160 no it purrs just fine 👍🏽
@@alansoriano9160 yes very dronny at 30+ mph sounds good but it makes lot noise in cabin when driving. You need to install sound deadener or another resonator
Do you have a part number or a link? I can’t seem to find it on z1 or banks website
The MBRP wins for me. I really want to hear it on my 2020 Midnight Ed.
You should replaced the "Y" connector first and dyno it to see the comparison between completely stock and just the Y replaced. Then start with the aftermarket ones. And for next episodes, a test with the Intake manifold spacer with stock air filter, Y replaced stock Exhaust. And from there
Spent a ton of time researching exhausts and landed on the Borla kit. The factory Y being retained definitely doesn't allow for as high of flow but super happy with the sound.
What do you mean by not allow high flow? I'm trying to add an aftermarket exhaust to my xterra pro 4X
@@jap4499 the factory Y pipe is pretty restrictive. The kits that come with the aftermarket Y pipes are better built and flow better.
@@daywalker4029 thanksmate!! can you recommend a kit that i can purchase? Not worried about the price
@@jap4499 ultimately depends on what you want. I like my Borla a lot. I would go through the video and decide which one you like.
@@daywalker4029 does it sound too loud while doing 70+ miles?
Flowmasters for me. Some low toned loud drone but i love itm
I have a banks power max and I love it
Is it a deep tone ? How loud is it?
Not that loud
Should try the cherrybomb, flowmaster super 40, and 44 on it
How about a Doug Thorley exhaust? Headers (short & long)?
Was hoping to see AFE exhausts but guess they weren't available :/
Good video. Just installed the walker dynomax. Sounds friggin nasty. Makes me love my manual even more. It cracks and sounds beautiful while slowing down. No idea if it makes more power. Our hp too low to ever notice mods.
I had the mbrp catback on my ‘12 pro 4x CCSB. After a while the coring does brake down & drones a lot! The aluminized tubing & case will break down in less than 5 years. So much so that it leaked & melted the wiring harness that’s directly above it. Idk why Nissan thought it would be a good idea to run wires there.
Hey @Z1 Off-Road, what would you pick AFE or MBRP & why ?
thanks :)
Are you guys planning on testing the AFE exhaust?
I like the Borla and the MBrp best unfortunately, his microphone didn’t pick up the banks exhaust note very well
When are you doing the combo intake and exhaust video
Nismo seems like the best kit for the money you get a full cat back from the y pipe back
You do with the banks
@@tdabney0242 banks powers drones alittle more I would think but I never ran one I also the nismo fitment is better and finish is alittle better I'm not sure if banks is 409 or 304 stainless..
my Banks was super easy to install. It was put on 13 years ago but been solid. CC Long bed so maybe that was the difference?
i watched this video and the one comparing cold air intakes. I had a cat back exhaust installed on my 2019 Frontier by Lou's Custom Exhaust (a New England chain), and put a Volant CAI on myself. Pretty happy with the results, sounds awesome and runs very well. Question: is there any need to have the tune updated based on these mods?
Mark, sorry about the late response. Generally if the manifolds and cats are still stock you should be okay with that combo. In our continued testing after this shootout the intakes that have a varied (funnel shaped) pipe like the aFe Momentum line or Holley intech appear to be close, and some instances over the safe limit of running "lean" when paired with free flowing exhaust. Stock sized intake piping seems to be a little safer. If you still have cats and a stock sized pipe intake you're probably okay, if doing more upgrades or pairing with one of the mentioned styles we would recommend a tune for sure. Of course you will always benefit from a tune (even on stock parts), but we wouldn't say "required" in all instances.
What is the frontiers normal exhaust size?? I know they say if you increase the exhaust diameter high end will go up but low end will go down a little ..with these 9 speeds now your usually in the low range .my question is if you keep the exhaust oem size till past cats and increase it after the cats will it still have effect on losing low end torque ?
What about a possible true dual exhaust system? Would that bog down the truck? Or is it just not a good idea in general?
Hello, love the video! Thanks for doing this. I noticed that 2 of the 3 (magnaflow and banks) are all listed for pre 2017 model test truck. Im not saying thats a huge culprit, but might have something to do with not fitting right out of the box. The Gibson has several models listed on your site, is it possible that the model installed wasn’t compatible? Not trying to be a troll or anything, just something I noticed that wasn’t pointed out. Love the frontier build, subscribed for more of that for sure. Thanks again!
Thanks for the support. Most do list list up to 2019 and 3 of these aftermarket systems fit perfectly, the exhaust really doesn't change till you get to the new 3.8L.
The issue with the magnaflow was the error where the intended slip fit at the back of the muffler was wrong. Both the muffler exit and the tail section were the exact same size. One needed to be larger than the other to utilize a slip fit and thus the crush clamp they provided, if you received this as a customer we would expect a call and to schedule a return on the product. We believe this is likely just a production error as the hanger appeared to be further off than we would have expected too on the magnaflow. Hopefully it's an isolated incident and would love to hear from others about their successes or challenges with it. On a positive note the Magnaflow did prove to perform well not only on the dyno but allegedly... allegedly, tail lights could have been show to a titan in a heads up test... allegedly. ;)
The Banks power fit perfectly until we got to the last section, in all honesty we think their exhaust could use a small update here at which point they become the obvious top contender.
@@z1off-road thank you for the reply, I understand the truck shares many of the same parts through the long model run of almost 15 years. I am 2 months into owning my frontier, I already have a wishlist saved on your site I hope to be checking off as funds become available. Thanks again for the great video and dyno proven results, even though tuned and stock ecu can have different outcomes its nice to see what the possibilities are.
@@z1off-road For what it's worth, I recently helped a friend install a Magnaflow catback on his E30 sedan. I'd recommended them because I've run a few of their exhausts on various cars, and have installed for other friends over the years and had no issues. His exhaust fit poorly (flange angles were off, bend angles were off), and we ended up having to modify pretty substantially to get it to fit. Part numbers were verified in triplicate to make sure we didn't order or receive the wrong part. Perhaps they're slipping a bit on their QC these days.
Would be great info except nobody actually makes an exhaust for my 4.0L powered R51 Pathfinder. Actually gets to 60 mph in about 6.1-6.2s with factory manifolds, cats and exhaust. JBA cat forward headers going on next.
the only one i can find for a 4.0 pathy is the gibson catback. other than that i think no one actually makes one. i had the same issue and right now my stock one is leaking so im prob gonna go gibson.
I’ve been looking for that same bull bar on that frontier. Would you be able to share the brand or where you got it???
what is the brush bar you have on the front?
The Gibson on both my older Nissans are directional louvers the systems fit perfect and I still love the sound when matched with my 3.0 and upgraded 3.3.
I did not see muffler direction mentioned in the video but that could be a contributing factor to power loss if it was backwards...
Or it could all together be a different design than the ones I have. Too bad it didn't work out for the 4.0 in the vid :(
Got any sound clips?
@@dansouza6284 there might be some on my channel, if not, I will try to remember to upload some.
I'll allso add that since posting this I bought a Gibson cat back for my pickup and the design was different from the (discontinued) ones on my pathfinder, it actually plugged up with soot and I had to remove it. (Diesel tuning)
That borla s type, I heard it popping damn
It only does that when revving to redline. I have that exhaust in my truck and it has never done it while driving it to redline.
@@daywalker4029 so what’s the best then?
Does the MBRP kit use mandrel bends?
Would it be safe to assume that the cold air intake test & this test would be close to the same results on the Titan 5.6? I was thinking about putting both on my Platinum Reserve.
May not be the best on horsepower, but the Nismo both sounds and looks the best of them all. And it's fitting because Nismo is Nissan.
Can you guys do a shoot out for the options that are available $or the 3.8 frontiers please? And maybe fab some of those set ups to it as well? I've seen a guy on here that fabricated the 4.0 mbrp system to the D41, sounds good but the recording is a bit close to the camera
We will absolutely do that, waiting on one more to become available so we can do our testing all at once.
"since we have real transmissions, not CVT's...." Says the man with a slush box. Be a man, drive a stick! Great review! Thanks for being thorough.
Can't find a MBRP for r51 pathfinder 😞 for me that was the best sounding
What timing! I was looking for an exhaust for my King Cab, initially was drawn towards the Nismo exhaust and I think this vid sold me. I'm not looking for crazy sounds or crazy power gain, just nice quality and a little more tone. What do you guys do with all the exhausts? Will you sell as open box for the bolt-ons, or willing to sell?
We posted most of these up for sale on the site after the test in our clearance section.
We update this every week so if you're a deal hunter definitely worth checking out from time to time www.z1offroad.com/clearance-c-83165.html
@@z1off-road Perfect! I'll keep my eyes out, thanks!
Will these fit an 08 pathfinder?
What’s the sku for the mbrp?
I would recommend a Nissan Titan,
Hey Spencer, wondering if Banks has made their exhaust a true bolt on right out of the box yet? Thanks
It is intended to be, we have had mixed feedback to date from other users. Some are getting bolt on solutions and others are giving us feedback slight tweaks have been needed. Seems like anyone with an extended shackle is also having to cut or modify for install.
do you have any tunes on the truck. i heard a nice subtle pop crackle on some of those including the nismo
This truck had been previously tuned on the stock exhaust. We did not re-tune it during any of the tests in this video.
Wondering how the Banks would fit on my 2015 Xterra Pro-4X which is not lifted; and thoughts out there.
It fits great
Want to see the same tests done on the 2020 or 2021 3.8 liked the comparison
Is there a dual cat back for our 3.8s yet? I have a 2021 crew cab
@@fsujmm I have the same truck 👍 I like it dont think they do yet
Great video, but how come the exhaust tips hang so low?
the real tip is hidden, what you see in the rear is just stylized faux tips.
What do you think about the new Nissans with the dual exhaust? What do you think about putting one of those on a Nissan Xterra run duel converters And then just at the end put a white pipe in to the stock exhaust. Yeah I know I know and then the next one to the exact same way and then cut open a stack muffler and put two inlets on it. And then do what you know how to do take it out check it for the dB and then put it on the Dino if you can do something like that for us guys.
The new 22+ frontier exhaust merges further back in the muffler. Nissan did a better job on it than the 4.0 exh but there is still room to improve.
Would be curious how the Nismo power numbers are paired with the Nismo Intake.
Agreed. I have the Nismo cold air intake on my Pro-4x and I am thinking about the Nismo exhaust. Looks good and sounds good. Would like to see them paired up.
@@N2KPopgurls any performance changes with the Nismo cold air intake?
Good video! Not too many of em out there cause no one really modifies their Frontier.
Anyways, back in August I bought a 21' white midnight edition and am looking to lower it, make it sound good with a deep tone to it and open up the cold air intake induction. It's kinda hard to tell which exhaust sounds deeper and better so if anyone has any recommendations then please let me know, I'd appreciate it
Got my MBRP system installed a few weeks ago, it growls like a wolf in the city at speeds below 45mph and it purrs like a big cat on the freeway.
Just bought one. Is the drone an issue with this system ? Will keep the factory exhaust just in case.
@@Monty-bi6mf you'll get a bit more of drone for sure. I guess I got used to it.
Would like to see the Z1
Mbrp and nismo sound the best to me then banks
I’m guessing the Gibson actually had too much restriction, so I’m guessing Nissan owners might want to skip the resonator with that particular exhaust system I don’t know how much exhaust flow improvement that would do and hopefully he’s using Royal purple HPS 5W-30 in his truck and their transmission fluid and rear axle fluid with all the heart accelerations during the tests so he gets maximum protection and obviously their fuel system treatment wouldn’t hurt either
That radio??
I got the banks exhaust and your z1 intake. It isn’t as loud or throaty as I’d like. What’s my next option? Headers?
Yep, we like the aFe twisted steel headers on the vq40
@Z1OffRoad Will the 4.0L fit on a 2021 sv 4x4? I’m having the hardest time finding any exhaust systems other than the one Z1 makes for my 2021.
Only confirmed at this point are ours and the new Nismo. You may have luck with other d41 systems but we have not confirmed that yet.
Same test for Titan
Do you have wheel spacers? What rubbing did you encounter with that tire size?
Fenderl liners, melt mod will take care of most of it.
Dang Spencer. Take it easy with that sword your opening then boxes with. Your liable to kill somebody...
where is flowmaster?
its a shame they do not offer anything for the 4cyl.
For the MBRP, would there be any sound/quality differences between the Installer Series (aluminized steel) or the XP Series (409 SS)?
Do one with a s10
Are any of these systems chambered or they all with glass packing
Most are packed style.
What did you use to measure the interior sound?
a phone app
What is the tire size and does it have a lift?
About the truck:
2017 Nissan Frontier SV 4X4
2.5" Lift kit
285/75R16 tires
Uprev Tune (for previously installed drop in filter)
**Test performed with stock air box and stock air filter
Will a mbrp exhaust fit the 2020 to 2021 with 3.8 or no
Did u ever get an answer to this question?
My problem is none of these fit the long wheel base so they all require fabrication
Did Banks fix the end pipe issue so that it fits now?
Not to our knowledge, when we called in to speak with their tech it seemed like they may have been familiar with the shackle fitment issue. Great news is the Z1 does clear the shackle, makes all the power and sounds great.
Does the mbrp exhaust work on the 2022 frontier?
Not the 4.0L version like the one we tested. The first obstacle is the flanges for the back of the cats is different on the 3.8 vs the 4.0. Magnaflow, Nismo are current bolt on options... stay tuned though we've have something even nicer for your 3.8L very soon.
Do any fit the crewcab longbed 2nd gens?
Only the ones with the included extensions we covered in the video. We also try to cover this in each listing.