How To Wall Mount Your Dyson Cordless Vacuum (Micro, V7, V10... Any Model!)
Вставка
- Опубліковано 5 лют 2025
- Here are instructions and a visual demonstration explaining how to mount your Dyson to the wall using the included wall mount bracket. The video shows how to replace the mount on an older Dyson vacuum, like the Dyson V6 with a new mount from a Dyson Micro 1.5kg, and then later shows how to hand the wall mount on its own. It's a simple process!
helpatmyhome.c...
#dyson #dysonhelp #dysonmanual
note: as an amazon Associate I earn from qualifying purchases
Thanks for speeding through the part I needed to see.
Happy to help
@@HelpAtMyHome that was a sarcastic thanks dude!!
You skipped through the bit I needed! 😹 Thanks tho
For those looking, use a 6mm drill bit for the hole.
This video skips the only step I came here for! (Creating the holes in the wall and using the plastic screw tubes
Good feedback thanks
Exactly!
Me also!
Apparently it’s impossible to remove as the bottom has one way clips. Madness
Wish these videos showed how they created the holes for the plastic piece
I just poked a thin screwdriver through the dry wall
@@HelpAtMyHome Thank you!
@@HelpAtMyHome Doesn't need to be on a stud?
@@gabrielfong It comes with "Drywall Anchors" which are meant to NOT go into studs, or you can use the screws directly to studs. Studs always more stable, but may not align with where you want it to go so you have options.
What about fixing it and power
dude!!! You fast forwarded through the wrap the cord inside the wall mount (not mandatory but it looks prettier.)
Not recommended to block access to your fuse panel.
Good call but if you take the vac down it opens fine!
How much clearance in front of electrical panel?
The NEC requires a minimum of 3 feet (0.9 meters) of clear working space in front of electrical panels. This space must be free of any obstructions to allow safe access and maintenance. The 3-foot clearance ensures that electricians have enough room to work safely without the risk of contact with live parts or equipment.
How much clearance around electrical panel?
The NEC specifies that electrical panels must have a minimum clear working space of 30 inches (76 centimeters) in width or the width of the panel, whichever is greater. Additionally, there must be a dedicated vertical space from the floor to a height of 6 feet (1.8 meters) above the panel, free of any obstructions like piping or ductwork, to ensure safe access and operation.
What is the 36 inch rule for electrical panels?
The 36-inch rule refers to the NEC requirement that there must be at least 36 inches (3 feet or 0.9 meters) of clear working space in front of electrical panels. This rule ensures that workers have sufficient room to safely perform maintenance and operate the panel without obstruction, reducing the risk of accidents and improving accessibility.
THE VIDEO IS AS CONFUSING AS THE INSTRUCTIONS FOR SETTING UP THE CHARGING STATION.
Why'd you skip the complicated way to wind up the cord? Terrible video.
Thanks for the feedback