ONE WORD.... "WOW"!!!!! Just installed this and now i can finally put my Astro C40 controller to rest. RIP ASTROC40. I have spent more than 1thousand dollars on that awfull controller in the last year :( them analog sticks just dont last as long as the ps4 analogs! Thank you for this product!
Personally, I love the holding feeling of Astro C40, but the quality is so bad, really really bad, both of the analog sticks drifted just after 1 month of use (I only play video games about 6 hours per week), and the mapped program was totally in chaos... I'm going to reset it and buy the Xbox Elite 2 analog sticks to replace them on, to see what's gonna happen.. Anyway, thanks for your feedback!!! :D
In this video you managed to address many questions in the past, including bigger text instruction on the video. Good one. But yet I still seen many people confused with the soldering part, which I also think that should be easy to understand but people not really. BTW I do find the cable provided for the touch sensing foil configuration the one below the LED very very to short cable, the one provided on the kit. Pre-installation from the kit might help a lot, such K buttons pre-installed on the back shell.
Thanks for your suggestion! The touch sensing foil its wire should be short because the longer it is, the easier to activate by accident. And when compare to pre-install K buttons on the back shell, we would prefer pre-install the whole kit on the controller :)
Thank you very much for the simple explanation! I have managed to build my own PS4 controller with your product, I am very happy with how it works, I would probably buy again :)
This music makes me feel like I’m floating at the jazz club , so clean, yet so smooth. Ps; Just got mine yesterday, installing today. Lets see how this goes.
@@interiorattack8331 actually went very well. I didn’t like the color controller I used the first go around, so I uninstalled and reinstalled into a gold DualShock 4 and I’m in love with the outcome. However, I will say; hard getting used to the buttons/paddles coming from the FPS StrikePack Dominator. That’s obviously just me going through the learning curve though 🙏🏼
If I already have the clicky hair triggers installed on my ps4 controller, will the dawn remap 2.0 kit work still? Or should I stick with the regular dawn remap kit?
I have a problem, the joystick enters me randomly and often in "configuration mode" interrupting the use of the rear buttons. I have already cut the thread of the touch configuration.
Awesome. Broke my controller in just under 4 minutes! Guess I'll be buying a scuf. For anyone that's interested - the part where he pulls the white tape connector out - don't pull the chip out along with it.
I have a problem, the controller enters me randomly and often in "configuration" mode and then stops making me use the rear keys. I have cut the thread for the touch configuration
I was confused of that as well but I looked up some reviews and that is just to make the touch pad mappable to the back buttons. It's not saying that the touch pad won't work anymore. No soldering is technically required for this unless you want the touch pad or L3/R3 buttons to be mappable to the back buttons.
Hi, i have a question. I still have to buy it and iIm wondering how the remap works. If I remap the O button with the K1, what happens if I press O? Does the console still get the O input? Or will it just do nothing?
You can still use the O button on the face of the controller. I’ve had 3 of these setups and literally the best scuff controllers. It also has a touch sensitive copper strip that you install in the back of the controller where you can basically lock the back buttons from not working when playing games you don’t need them.
@@natini9307 did you remove the foil from inside? Although you cut it, they may still be making contact once you put the controller back together and that would be enough to send it into programming mode.
@@Chr15Payne yeah I did. I ended up using the Extremerate remap kit with 4 buttons and no problems. I think mine was just a defective product. thank you for the help though
Got mine today. It keeps going into the setting mode even though i installed it without sensing area... should i send it back or is there a fix? Figured out it happens when i press the left button.
I have this on my ps4 but i have problem when i use it as Bluetooth the paddles works fine but when im using on the pc they stop working and i have to disconnect and do it again, you guys know anythinng about sth like that happening before ?
Hello @extremrate , i play fortnite and my edit Button ist on Touchpad and i want that the left paddle ist for build Plan and the right for jumping, is that possible
At 5:30 ... with attention to the left screen ............Is he just shorting the upper right leg of that white button to the first (furthest left) contact point for the ribbon cable? Just asking to be sure in case that is what I need to do in a few days ...
Hi, i bought a kit for ps4 controller , i had installed it but now the controller cant connect to ps4 . When i try to connect the controller to my ps4 there is an orange light and its like the ps4 dont recognize the controller so the controller dont work How can i fix it ? When i remove your mode from the controller the controller restart to work fine
this is the only good PS4 controller out there. I did the clicky triggers and back buttons and its awesome. Only thing, I didn't see a video of how to do both at the same time. So I had to flip between videos. Great product tho
I have the DAWN kit (4 remappable back button) and it works great but I only use two of the back buttons due to how close they are together to prevent incorrect button presses. I like this model better suited to me. Its essentially the xbox one lofty kit for ps4. I lkve the lofty on my Xbox controller more than DAWN. Would much rather have the stops over the 2 extra remaps. Looks like I could just cut off the two buttons I don't use and install 2.0 backplate with trigger stops and not have to go through all the solder work and pay higher price. Anyway you could sell just that mod kit? Essentially DAWN to 2.0 mod kit. Please? I much prefer trigger stop and 2 remap like lofty. Either way, keep up the great work. Diy mods keep giving gamers options and more money in our wallets. Thank you.
Everything is fine, turning on and everything but I can’t remap any buttons. I took out the touch sense remap and tried manually and it didn’t work. Helpp
Is the LED indicator lights up when you try to enter the setting mode? And please make sure the orange flex was plugged into the remap PCB board correctly.
Hi i have installed the full kit on my controller but i didnt do any of the soldering as it didnt come with the foil part on my board. Can i still remap the back button to x ??
@@declan_brant No they'll work as normal, you just can't remap them. I've made a few video installs on these kits explaining best I can. I never solder, I'm happy with just remapping X and O
just ordered this. if I wanted to use the back buttons for L3 & R3 and wanted to avoid soldering, could I not just use the PS4 system software to remap L3 & R3 to square & circle, then use the kit to map the back buttons to square & circle, effectively making the back buttons L3 & R3?
@@ExtremeRate I bought this pretty much exclusively for playing NHL 21, so having square and circle mapped to existing L3 & R3 buttons to change lines is actually better than square & circle. navigating menus is a little trickier than stock, but I pinned accessibility to the quick menu and enabling/disabling custom button assignments is very easy. this is a great product and I'm really enjoying it so far! much better than the OEM back button attachment. I'll post a review on amazon once I've had a month of use. thanks!
I only have x and o on my back buttons. Can you tell me why is it that when I click my L3 button while aiming and shooting (L3+L1+R1) it activates my "R2" as in, it changes my weapon in game as if I had pressed R2? Its very annoying and I can not find a fix to it. It almost seems like this mod can not handle a severity of continuous button presses which makes it go haywire and activates random buttons? PLEASE HELP
@@ExtremeRate everything is installed properly. I gave up. This is just a nice mod for casual players. This mod cannot handle extensive button presses on a competitive level.
@@dnaonyoutube No problem. Just as we test on some PS4 controllers, it seems they are from another manufacturer, the electricity of them are not stable, the issue you described will happen, but it can be fixed by the way I said above.
I bought a normal remap kit but unfortunately the brown ribbon cable was ripped when i put the shells back together. Is there a way i can get the brown cable without having to buy the whole kit again?
Sexiest DIY mod back buttons kit and trigger stop. Also you cant beat the soft touch shell. I am going to cop but PLEASE it needs two more back buttons underneath the buttons already for this to be the ULTIMATE GAME CHANGER!
Hola. Presione L1 + R1 + abajo + X durante 5 segundos, el LED en la carcasa inferior se encenderá en azul, este es el modo de configuración. En el modo de configuración, presione el botón que desea mapear y el botón de retroceso juntos en 2 segundos, el LED parpadeará en azul 3 veces, el mapeo del botón está listo. Presione L1 + R1 + abajo + X durante 5 segundos nuevamente, el LED se apagará y la configuración finalizará. Como desde las 02:50 en el video.
Hi ive purchased the extremerate v2 kit for ps4 ive watched a few videos and put it toegether but had no luck it doesn't turn on i re did it a few times but it still doesn't work there is a bend in the flex cable could it be that ?
@@amirrahman7197 The problem may possibly from the flex cable. Please let us know your order number via email to service@gamingcobra.com with your shipping address and UA-cam name, we will send you the replacement of the flex, thanks
@@theunsportsmen6088 Please let us know your order number via email to service@gamingcobra.com with your shipping address and UA-cam name, we will send you the replacement of the flex, thanks
Do you mean it automatically enter the setting mode? Please make sure you have cut off the touch sensing foil with its wire completely, and then stick a small piece of electrical tape on the soldering point of the board.
Installed everything correct. It done the 3 blue flashes like it program the button but it doesn't work when I try to use, do you know what's happening?
Please re-plug the orange flex into the small PCB board, and arrange the wires to avoid them shorted with any part of the controller mainboard. Please try it and keep us updated.
@@ExtremeRate seems like i damage one end of the small orange flex that goes in the slot on the ps4 board. The back paddles work when I have my controller apart but when I close it the back paddles don't work
I installed it and it was pretty straight forward all buttons work except one which is strange. My R2 trigger button doesn't work but if i hit the ps button it'll suddenly start shooting rapid fire. Is there Anyone out there that can help a brother out
Please take apart the controller again and re-position the orange ribbon, and then fix the screw on the controller mainboard firmly, and then check it again
@@ExtremeRate just finished checking both the orange ribbon and the motherboard screw. I'm convinced it's the orange ribbon that is causing the issue. I did the double sided tape but it was a really strong brand when I rechecked the orange ribbon it had been kinda torn from the first time I tried repositioning It when I originally started the process. I'm assuming that's the issue. I did the double sided tape by the both holes on the left and right. Please advise what I can do or what you guys can do. I did email you guys as well.
Just want to say these guys have sent me a replacement orange ribbon the same day that I emailed them. That's great business practices!! I will continue updating
I'm having trouble with the dawn remap kit V2 it goes into setup mode while I'm playing and and i got rid of the sense touch to avoid this from happening but it still turns on anyway, any suggestions
Please cut off the touch sensing foil with its wire as well as the soldering tin on the PCB, and then stick a small piece of electrical tape on that soldering point
@@ignaciodelunacruz1308 Please let us know your order number via email to info@extremerate.com with your shipping address and UA-cam name, we will send you the replacement of the PCB board to try again. In your next installation, please cut off the touch sensing foil with its wire and then stick the electrical tape on its soldering point beforehand.
This kit hasn’t worked for any of the controllers I put it on, however I know some people who have successfully put it on their ps5, however I don’t know anyone who successfully put any extremerate kit on their ps4 controllers. I’d say you’re better off buying the controller paddle attachment from PlayStation.
I dont understand what u mean when you showed 2 videos side by side! If you need touch pad remap back buttons or if you dont touch pad to remap back buttons??? What do you mean?
Great product but it goes into remap mode by itself sometimes, even though I already cut the wire with the foil piece. Is there a way to lock it so it doesnt remap?
@@natini9307 Please also try to remove the double-sided foam on the soldering spot of the touch sensing foil. I mean make that spot do not be touched by anything
@@ExtremeRate It still goes into remap mode randomly. Do you recommend me covering the soldering point (where the touch wire used to be) with electrical tape so it doesn't come in contact with anything?
@@rcytv9613 The double side tape is unnecessary for no matter you need to mao L3 R3. The double side tape will just help you make the orange ribbon stay in place when you install it. So if you can install the orange ribbon without the double side tape, then it's ok. If you use the double side tape, don't make it cover the metal dots of the orange ribbon.
At First everything was fine ... But with the time it get worse... so l3 and r3 are broke or something else. But i followed the instruction and everything is fine
@@Arsan.62 That is strange. Please re-arrange the wires of the kit inside of the controller, to make them avoid touching the motherboard of the controller, which means avoid the kit short circuit the controller.
It seems the wires (cable) of the K1 button got shorted with other components inside of the controller. Please take apart the controller again and rearrange the wires of the kit and to see if the problem stands still.
Hi there I have a problem with mine. After installing the kit my l2 controller doesn’t work and I found how to fix it by moving the flex ribbon on the kit board but after I put it back together my l2 start acting on its own sometimes it doesn’t work
Hello, we are going to investigate this issue, you are the 3rd customer reported this. Please take off the kit and wait for our result, once we found the reason, we will let you know how to fix or send you the replacement. Thanks
@@Cozme909 Then it must be the orange flex problem. Please re-install it and make sure the screw of the controller mainboard was fixed tide enough. If the problem still, please let us know your order number via email to service@gamingcobra.com, we will send you the replacement of the flex for you to try again, thanks
@Sauce guy Problem is still from the orange flex connection, you have to align it correctly and then fix the screw on the controller mainboard firmly. When you press L3 the L2 reacts, because the orange flex moves when you give pressure on the mainboard, and the L2 connection point on the flex thinks you were pressing it.
If you just want back buttons only you might be better off with the v1 mod kit, or yeah you could install this without the trigger stops. The v1 kit combined with the clicky kit is a fantastic combo
by the way I hope the back button switches can be replaced with higher quality,one of my v1 buttons stopped working after 2 month then I replaced a same new one.
I am getting some very strange glitches after installing. Can you recommend what to do? Glitch #1. My L3 button now seems to be crossed/combined with L2. Every time I press L3, it is as if I am pressing L2 and L3 at the same time. Even if I unmap my L3 button to nothing in game, pressing it still seems to trigger a L2 press. I thought my original controller was broken, so I installed the remap kit on another controller, and same thing. I did not solder the L3 and R3 wires to the motherboard, and neither back button was mapped to L3 or L2. Glitch #2. I tried mapping my right back button to left on the D-pad, which temporarily breaks that button on my controller, left on the D-pad won't work, and the back button won't work. The weird thing is even after resetting/unmapping the right back button or mapping it to another button, it takes a long time every time before the left on the D-pad button starts working again. Sometimes it has been 15 minutes, sometimes it has been hours. Not even pressing the reset button on the back of the controller fixes it. It will just start working again on it's own at some random time in the future. Only seems to happen with that left d-pad button specifically.
I took apart and reassembled the remap kit from scratch, and tested the buttons on PC. Now pressing L3 causes L3, L1, and R1 to all press simultaneously. And moving around the right analog stick triggers L2 to also constantly register. The FPC board looks lined up perfectly, and this is a brand new controller. Is it possible it is a faulty FPC bord? I can confirm once I unhook the FPC board, every button functions as it should.
The problem must be from the orange flex. 1. it should be aligned correctly; 2. you have to fix the screw on the mainboard of the controller firmly.Please check the above problem. If the problem stand still, please check if the 2 holes on orange flex was deformed, if so, please let us know.
@@ExtremeRate I am certain I have it aligned correctly, and the flex cable looks okay. Though it does have a crease in it where it would of bent over to the other side of the motherboard, could that be causing the problem? I have re-tried installing many times now, and it is the same every time, some buttons will work, some wont, and some buttons are as if they are permanently pressed down, with different combinations of buttons working or not working with each attempt. Is it possible I can purchase just the flex cable?
@@leeleptus Please let us know your order number via email to service@gamingcobra.com with your shipping address and UA-cam name, we will send you a new flex cable to try
@@ExtremeRate Just an update. I received the replacement flex cable, was getting the same problems. So I replaced the board with one of the extremerate V1 boards (just removed the 2 extra buttons) I had installed on another controller, and that fixed it. So it was a faulty board causing the glitching, not the flex cable.
I've got both and can't get away with the circle ones, the original buttons feel much better to me. In the Dawn 2.0 you get both circle and older style to use
Just finished mine. * Some advise* be careful with installation. All the ribbons from your controller are fragile. You can't screw all the screws in or the analog stick will get stuck or it will unplug a ribbon cable. You'll also need to find a sweet spot for every outer screw, the buttons/ analog stick will get stuck otherwise.
Do you mean the lightbar does not turn on? And for the charging problem, have you tried to connect the controller with your console via USB cable and check the screen immediately, if the controller starts charging, there will be a battery icon show up on the left-top of your screen. I mean I want to figure out if it's just the lightbar problem or the whole micron-USB board problem
@@ExtremeRate yes, the lightbar, if i press the playstation button the controller turn on, i can use it, but the lightbar doesnt turn on, for the charching i have used two different cable but nothing
I just got this along with a bunch of button kits and a faceplate to go along with it and.. I just love it so much. It's amazing. Install was nice and easy, excellent reference videos. There will be 5 star reviews and uploaded pics on the way! Two questions though, what kind of wire is used to hook up the buttons? And where can I get some? I have not seen that in any of my local shops or online. It would be good for so many small electronics projects! I'm on a mission to find some of that wire for my work bench. Haha
@@markcr392 tbh it's very rarely used other than tiny little things like this. Most wire is components wire which is thicker and has the plastic seal protecting it. Glad I could help 👍 always here if you need anything more
@@CraigsChannel I would imagine, any sort of amperage and it would be toast! That must be why it was so hard to find, it doesn't seem to be very common. (At least in the USA?) For small projects in tight cases, like this one, it's perfect. I have been working in the tech industry for years now and have never seen this wire before, I was going a little mad trying to find it. Thank you again! Now I can order a few spools!
@@markcr392 like I say I've only seen it a few times. I've got spare from cutting the wire for the remap and for the L3 R3 as I dont use them. I did the little install video for eXtremerate for the v1 and v2, but also the clicky mod kit which is brilliant
@@aquaarmour4924 Thank you, and that killing us too, we are expecting to hear the feedback from customers about the new kit no matter positive or not :)
My pad keeps going into the remap mode randomly, I've alredy cut the sensor wire and it works fine fore few months but not any more. Now it keeps doing it several times during a game and honestly it is pretty annoing. Do you have any idea on how to fix this problem ? I bought a new kit because I love it and I cannot play without it anymore. Nevertheless, I want to be sure that this problem will not happen again or at least understand how ti fix it !
I have this problem right now very annoying. I used the sensor for a while and I keep getting into the remap because i lay the controller on my leg so i opened it up and got rid of the sensor now mine goes in and out of remap at random
I just finished modding my controller with this kit. The video was very helpful and made an easy and straightforward assembly. Great kit!
ONE WORD.... "WOW"!!!!! Just installed this and now i can finally put my Astro C40 controller to rest. RIP ASTROC40. I have spent more than 1thousand dollars on that awfull controller in the last year :( them analog sticks just dont last as long as the ps4 analogs! Thank you for this product!
$1,000 dollars! Was it diamond camo 😂
Personally, I love the holding feeling of Astro C40, but the quality is so bad, really really bad, both of the analog sticks drifted just after 1 month of use (I only play video games about 6 hours per week), and the mapped program was totally in chaos... I'm going to reset it and buy the Xbox Elite 2 analog sticks to replace them on, to see what's gonna happen.. Anyway, thanks for your feedback!!! :D
Ive installed it, it's pretty gnarly and comfortable
Great to know that! :D
@@rrb876 Yes!
In this video you managed to address many questions in the past, including bigger text instruction on the video. Good one. But yet I still seen many people confused with the soldering part, which I also think that should be easy to understand but people not really. BTW I do find the cable provided for the touch sensing foil configuration the one below the LED very very to short cable, the one provided on the kit.
Pre-installation from the kit might help a lot, such K buttons pre-installed on the back shell.
Thanks for your suggestion! The touch sensing foil its wire should be short because the longer it is, the easier to activate by accident. And when compare to pre-install K buttons on the back shell, we would prefer pre-install the whole kit on the controller :)
Thank you very much for the simple explanation! I have managed to build my own PS4 controller with your product, I am very happy with how it works, I would probably buy again :)
do screws for the ps4 controller come with this kit my screws are horrible stripped
I've watch several installation videos this shows the best like the split screen for solder and no need solder. Thanks
You are welcome :D
I ALREADY HAVE THE CLICKY HAIR TRIGGERT KIT.... WORKS WITH THIS KIT OR NO?????? THANKS
Just ordered mine, and I can't wait to put it together! I'll be back with an update. 9 days give or take....:)
Can't wait to hear your voice about it!
Yea how is it?
maybe he's too busy enjoying his trigger stops he hasnt returned..
I just ordered mine, got it and putting it together today and don't worry I'll be back to let you know how well it works
I just ordered mine too! Don't worry, i will be back to tell you what i think about it too!
Hello im pretty late but so if i dont want the touch pad to be mappable to back buttons i Just like put it on top
This music makes me feel like I’m floating at the jazz club , so clean, yet so smooth.
Ps; Just got mine yesterday, installing today. Lets see how this goes.
Good luck!!!
How’d it go? I’ve had mine a year now and actually have done multiple different color build because I love these setups so much.
@@interiorattack8331 actually went very well. I didn’t like the color controller I used the first go around, so I uninstalled and reinstalled into a gold DualShock 4 and I’m in love with the outcome. However, I will say; hard getting used to the buttons/paddles coming from the FPS StrikePack Dominator. That’s obviously just me going through the learning curve though 🙏🏼
If I already have the clicky hair triggers installed on my ps4 controller, will the dawn remap 2.0 kit work still? Or should I stick with the regular dawn remap kit?
Wait im really confused with the wording can i have the touch pad work as normal if i instale these
I have a problem, the joystick enters me randomly and often in "configuration mode" interrupting the use of the rear buttons.
I have already cut the thread of the touch configuration.
Please cut the wire of the touch sensor also, and after that, put an electric tape cover on the soldering point of it
Hi, can I buy it and use it only the trigger? I don't need remapping anything..... Only need the trigger stop
Spettacolo, non vedo l'ora di provarlo ;)
Grazie!
Awesome. Broke my controller in just under 4 minutes! Guess I'll be buying a scuf. For anyone that's interested - the part where he pulls the white tape connector out - don't pull the chip out along with it.
🤣🤣
Which part in the video?
OMFG I just did the same exact thing ! this video sucks..
How would you reset a kit. I had trouble when I first set mine up and ended up taking it off because I remapped some buttons to random buttons.
Press L1+R1+up+left +triangle+circle for 5 seconds to cancel all the remap setting
I have a problem, the controller enters me randomly and often in "configuration" mode and then stops making me use the rear keys.
I have cut the thread for the touch configuration
@@dexterx5919 same. you found a solution?
Pieces don't fit on my PS4 controller. No good
So can i do this without soldering and if i cut off the L3 and R3 what do i replace it with?
do u guys give all the screws?
I already have the hair trigger kit, so is it possible to install this Remap Kit without using the trigger adjustment pieces?
What’s the difference between with touch pad buttons and without?
I know this video is 4 years old but I’m gonna ask anyway, is there any way to keep the touch pad without soldering?
I was confused of that as well but I looked up some reviews and that is just to make the touch pad mappable to the back buttons. It's not saying that the touch pad won't work anymore. No soldering is technically required for this unless you want the touch pad or L3/R3 buttons to be mappable to the back buttons.
Hi, i have a question. I still have to buy it and iIm wondering how the remap works. If I remap the O button with the K1, what happens if I press O? Does the console still get the O input? Or will it just do nothing?
You can still use the O button on the face of the controller. I’ve had 3 of these setups and literally the best scuff controllers. It also has a touch sensitive copper strip that you install in the back of the controller where you can basically lock the back buttons from not working when playing games you don’t need them.
@@interiorattack8331 thank you
The blue sensor light comes on every 1/2 hr is so and disable the paddles, how to fix this?
You could just cut the foil off and go into remap mode manually by pressing the buttons rather than holding your finger on the sensor!
Please cut the touch sensing foil off, after that you have to enter/exit setting mode by buttons combo
same thing is happening to me randomly. did you come up with a solution? I already cut the wire that had the foil on it.
@@natini9307 did you remove the foil from inside? Although you cut it, they may still be making contact once you put the controller back together and that would be enough to send it into programming mode.
@@Chr15Payne yeah I did. I ended up using the Extremerate remap kit with 4 buttons and no problems. I think mine was just a defective product. thank you for the help though
Got mine today. It keeps going into the setting mode even though i installed it without sensing area... should i send it back or is there a fix?
Figured out it happens when i press the left button.
I have this on my ps4 but i have problem when i use it as Bluetooth the paddles works fine but when im using on the pc they stop working and i have to disconnect and do it again, you guys know anythinng about sth like that happening before ?
Hello @extremrate , i play fortnite and my edit Button ist on Touchpad and i want that the left paddle ist for build Plan and the right for jumping, is that possible
Yes, you have to solder, follow the left part from 5:09
So i can actually plus the back buttons and the hair trigger in one controller
At 5:30 ... with attention to the left screen ............Is he just shorting the upper right leg of that white button to the first (furthest left) contact point for the ribbon cable? Just asking to be sure in case that is what I need to do in a few days ...
Hi, i bought a kit for ps4 controller , i had installed it but now the controller cant connect to ps4 . When i try to connect the controller to my ps4 there is an orange light and its like the ps4 dont recognize the controller so the controller dont work
How can i fix it ?
When i remove your mode from the controller the controller restart to work fine
That’s weird. Have you tried another USB port of the console?
And is the controller can be turned on by pressing the PS button?
Do you need a soldering machine?
does wired work if i removed the battery completely?
Can I put them on my ps4 pro controller?
How do I know what type of controller I have ?
Do you have kits for Ps4 CUH-ZCT 2 controllers?
If I chose not to do all that soldering, will a lose complete functionality of the touchpad or will I just not be able to remap to it?
you wont be able to remap to it
Video ben fatto, complimenti. Una domanda: ho bisogno per forza del saldatore per questo tipo di kit, o ho altre soluzioni?
Grazie. Se non si desidera mappare l'L3 R3 e il pulsante del touchpad, non è necessario eseguire la saldatura.
Does using this kit increase button delay?
no it doesn't
this is the only good PS4 controller out there. I did the clicky triggers and back buttons and its awesome. Only thing, I didn't see a video of how to do both at the same time. So I had to flip between videos. Great product tho
Thank you. And sorry, most of our kits are can be combo together, and if we make all the videos of how to combo them, that will be huge works....
Just installed it, works fine on the PS home page but games won't let me use the controller at all.
I have the DAWN kit (4 remappable back button) and it works great but I only use two of the back buttons due to how close they are together to prevent incorrect button presses. I like this model better suited to me. Its essentially the xbox one lofty kit for ps4. I lkve the lofty on my Xbox controller more than DAWN. Would much rather have the stops over the 2 extra remaps. Looks like I could just cut off the two buttons I don't use and install 2.0 backplate with trigger stops and not have to go through all the solder work and pay higher price.
Anyway you could sell just that mod kit? Essentially DAWN to 2.0 mod kit. Please?
I much prefer trigger stop and 2 remap like lofty.
Either way, keep up the great work. Diy mods keep giving gamers options and more money in our wallets. Thank you.
Hi! We will list this V2 kit without the electronics parts on our website www.gamingcobra.com, thank you!
My ps4 circuit is more complex does that mean it’s not compatible
Everything is fine, turning on and everything but I can’t remap any buttons. I took out the touch sense remap and tried manually and it didn’t work. Helpp
Is the LED indicator lights up when you try to enter the setting mode? And please make sure the orange flex was plugged into the remap PCB board correctly.
My PCB chip board had gotten messed up so I’m not able to insert the FPC cable into it. Is there anyway to get that replaced?
Is the small black tab still there?
Hi i have installed the full kit on my controller but i didnt do any of the soldering as it didnt come with the foil part on my board. Can i still remap the back button to x ??
Is there a way to remap the buttons without the sensor?
@@dafyddpetty597 Yes, you can enter/exit the setting mode by pressing L1 + R1 + down(dpad) + X for 5 seconds.
@@ExtremeRate thanks i figured it out now thanks for your time 👍
@@dafyddpetty597 You are most welcome!
stupid question because i know nothing, will taking the rumble packs out cause any issue?
This late but no issue taking out rumbles.
And if u don't want to use the l3 and r3. Do u cut the wires and only plug the button one in
Yeah you can snip the wires if you aren't going to be soldering them for L3 R3
So does that mean the l3 and r3 button won’t work at all? I’m confused ?
@@declan_brant No they'll work as normal, you just can't remap them. I've made a few video installs on these kits explaining best I can. I never solder, I'm happy with just remapping X and O
Can u also run the clicky buttons with this ???
Yes just after you install the clicky triggers the trigger stops mechanism will become useless
just ordered this. if I wanted to use the back buttons for L3 & R3 and wanted to avoid soldering, could I not just use the PS4 system software to remap L3 & R3 to square & circle, then use the kit to map the back buttons to square & circle, effectively making the back buttons L3 & R3?
Oh, yes, you can! But what about the square and circle buttons? You don't have them after doing this.
@@ExtremeRate I bought this pretty much exclusively for playing NHL 21, so having square and circle mapped to existing L3 & R3 buttons to change lines is actually better than square & circle. navigating menus is a little trickier than stock, but I pinned accessibility to the quick menu and enabling/disabling custom button assignments is very easy. this is a great product and I'm really enjoying it so far! much better than the OEM back button attachment. I'll post a review on amazon once I've had a month of use. thanks!
@@420devious Thank you so much! We love to hear the feedback from gamers like you :)
I only have x and o on my back buttons. Can you tell me why is it that when I click my L3 button while aiming and shooting (L3+L1+R1) it activates my "R2" as in, it changes my weapon in game as if I had pressed R2? Its very annoying and I can not find a fix to it. It almost seems like this mod can not handle a severity of continuous button presses which makes it go haywire and activates random buttons? PLEASE HELP
Please make sure the orange flex installed correctly and fix the screw on the controller mainboard firm enough.
@@ExtremeRate everything is installed properly. I gave up. This is just a nice mod for casual players. This mod cannot handle extensive button presses on a competitive level.
@@dnaonyoutube No problem. Just as we test on some PS4 controllers, it seems they are from another manufacturer, the electricity of them are not stable, the issue you described will happen, but it can be fixed by the way I said above.
Do u have to use the solder
Soldering is optional. Please check 5:05
I bought a normal remap kit but unfortunately the brown ribbon cable was ripped when i put the shells back together. Is there a way i can get the brown cable without having to buy the whole kit again?
Please let us know your order number via email to service@gamingcobra.com with your shipping address and UA-cam name, we will send you the replacement
I need help are buttons are sticking together, how do I fix. I am several of your products
I need help
September22021
What do you mean by sticking together?
i have a big problem i have buy the version for the controller 040 050 055 but i have only 055 is compatible?
Yes!
Sexiest DIY mod back buttons kit and trigger stop. Also you cant beat the soft touch shell. I am going to cop but PLEASE it needs two more back buttons underneath the buttons already for this to be the ULTIMATE GAME CHANGER!
Please stay tuned!
@@ExtremeRate anything planned for ps5?
@@cjrenteria7148 SURE!!!
Jesses this is incredibly amazing,but where is my another 2 back buttons😭😭😭😭😭😭
You will see them in Sep :)
ExtremeRate 😍🥰
@@ExtremeRate what do you mean? Is there a v3
Conner Anderson maybe the ultimate version😏
@@Conner._.Anderson 4 back buttons with trigger stop and bigger size. It's not DAWN ;)
So just to make it clear you don't need to solder it or do you lmao?
Hey I was wondering if you can map share button or PlayStation button to back paddle
No
Why would you want to do that 🤣
does this work with ps4 pro controllers and those made in 2016
If there is a light bar on the touchpad, then it works. If the model number starting with CUH ZCT2, then it works
Hola en las instrucciones viene en español como se programan los botones ?gracias
Hola. Presione L1 + R1 + abajo + X durante 5 segundos, el LED en la carcasa inferior se encenderá en azul, este es el modo de configuración. En el modo de configuración, presione el botón que desea mapear y el botón de retroceso juntos en 2 segundos, el LED parpadeará en azul 3 veces, el mapeo del botón está listo. Presione L1 + R1 + abajo + X durante 5 segundos nuevamente, el LED se apagará y la configuración finalizará. Como desde las 02:50 en el video.
The blue light keeps turning on during gameplay. How do I stop it?
Hi ive purchased the extremerate v2 kit for ps4 ive watched a few videos and put it toegether but had no luck it doesn't turn on i re did it a few times but it still doesn't work there is a bend in the flex cable could it be that ?
Is the controller still functional except for the back buttons?
@@ExtremeRate yes the controller is fully functional its just the back button that are not working
@@amirrahman7197 The problem may possibly from the flex cable. Please let us know your order number via email to service@gamingcobra.com with your shipping address and UA-cam name, we will send you the replacement of the flex, thanks
I got the same problem @ExtremeRate
@@theunsportsmen6088 Please let us know your order number via email to service@gamingcobra.com with your shipping address and UA-cam name, we will send you the replacement of the flex, thanks
I have problem in game.
I dont press any buttons , i have cut the touch button and the main menue start any time..
And the back buttons stop working..
Do you mean it automatically enter the setting mode? Please make sure you have cut off the touch sensing foil with its wire completely, and then stick a small piece of electrical tape on the soldering point of the board.
Do I have to soder
Installed everything correct. It done the 3 blue flashes like it program the button but it doesn't work when I try to use, do you know what's happening?
Please re-plug the orange flex into the small PCB board, and arrange the wires to avoid them shorted with any part of the controller mainboard. Please try it and keep us updated.
@@ExtremeRate seems like i damage one end of the small orange flex that goes in the slot on the ps4 board. The back paddles work when I have my controller apart but when I close it the back paddles don't work
@@youngrill12 Is the black tab on the PCB still lock up with the orange flex? And do you see any damage on the orange flex?
@@ExtremeRate the black tab has fell off. I have no idea how to put it back on the pcb. I only see the one damage area. I also sent an email out
I cut off the heat sensor and the “mapping” function now turns on randomly here and there. Any tips?
Please cut off the sensor's cable completely, and then stick a electric tape on its soldering point of the PCB.
@@ExtremeRate thank you so much!
@@sweetswingYT You are welcome :)
I installed it and it was pretty straight forward all buttons work except one which is strange. My R2 trigger button doesn't work but if i hit the ps button it'll suddenly start shooting rapid fire. Is there Anyone out there that can help a brother out
Please take apart the controller again and re-position the orange ribbon, and then fix the screw on the controller mainboard firmly, and then check it again
@@ExtremeRate just finished checking both the orange ribbon and the motherboard screw. I'm convinced it's the orange ribbon that is causing the issue. I did the double sided tape but it was a really strong brand when I rechecked the orange ribbon it had been kinda torn from the first time I tried repositioning It when I originally started the process. I'm assuming that's the issue. I did the double sided tape by the both holes on the left and right. Please advise what I can do or what you guys can do. I did email you guys as well.
@@jahmezis45 Then you need a replacement for the orange ribbon. Which email address have you sent to?
Just want to say these guys have sent me a replacement orange ribbon the same day that I emailed them. That's great business practices!! I will continue updating
@@jahmezis45 Thank you!! :)
I'm having trouble with the dawn remap kit V2 it goes into setup mode while I'm playing and and i got rid of the sense touch to avoid this from happening but it still turns on anyway, any suggestions
Please cut off the touch sensing foil with its wire as well as the soldering tin on the PCB, and then stick a small piece of electrical tape on that soldering point
I just tried it but it's still no working
@@ignaciodelunacruz1308 Please let us know your order number via email to info@extremerate.com with your shipping address and UA-cam name, we will send you the replacement of the PCB board to try again. In your next installation, please cut off the touch sensing foil with its wire and then stick the electrical tape on its soldering point beforehand.
I have the CUH-ZCTU2 controller and I installed the JDM-040/050/055, my controller isn’t turning on, Is that why?
Please make sure the orange flex was installed correctly, make the contact points aligned with everything!
Per quanto riguarda il filo blu e rosso che vanno su l3 e r3, c'e un altro modo per attaccarlo?
L'unico modo è saldare come abbiamo fatto noi
@@ExtremeRate appena visto come rimappare.
Ma come posso fare se tipo voglio modificare 3 tasti in uno?
@@alfonso270792 Questa è la macro funzionale, il nostro kit non la supporta.
is this or the old kit better ?
This kit hasn’t worked for any of the controllers I put it on, however I know some people who have successfully put it on their ps5, however I don’t know anyone who successfully put any extremerate kit on their ps4 controllers. I’d say you’re better off buying the controller paddle attachment from PlayStation.
I dont understand what u mean when you showed 2 videos side by side! If you need touch pad remap back buttons or if you dont touch pad to remap back buttons??? What do you mean?
Great product but it goes into remap mode by itself sometimes, even though I already cut the wire with the foil piece. Is there a way to lock it so it doesnt remap?
Please try to remove the tin that hold the wire of the foil on the board
@@ExtremeRate I removed it but it still randomly goes into remap mode. Not sure why
@@natini9307 Please also try to remove the double-sided foam on the soldering spot of the touch sensing foil. I mean make that spot do not be touched by anything
@@ExtremeRate It still goes into remap mode randomly. Do you recommend me covering the soldering point (where the touch wire used to be) with electrical tape so it doesn't come in contact with anything?
@@natini9307 Yes, please try that. If it still happens, we can send you another one remap board
Hi, if i dont need map l3 r3 and tactil button i need double face ? Thx
What do you mean by double face?
I mean adhesive band?
@@rcytv9613 The double side tape is unnecessary for no matter you need to mao L3 R3. The double side tape will just help you make the orange ribbon stay in place when you install it. So if you can install the orange ribbon without the double side tape, then it's ok. If you use the double side tape, don't make it cover the metal dots of the orange ribbon.
I bought several kits from you and installed them ... most of them forgave the l3 odee r3 tastan ... can you tell me why?
At First everything was fine ... But with the time it get worse... so l3 and r3 are broke or something else. But i followed the instruction and everything is fine
@@Arsan.62 Hi, do you mean the L3 R3 becomes unfunctional?
@@ExtremeRate yes ...
@@Arsan.62 That is strange. Please re-arrange the wires of the kit inside of the controller, to make them avoid touching the motherboard of the controller, which means avoid the kit short circuit the controller.
@@ExtremeRate well i found pur, that the flex cabel isnt functional... how can i get some New ones ?
@ExtremeRate Hi, i can't set K1. When i enter the setup mode as soon as i press K1 + any other key, the setup will exit.
Is it flashing blue or red?
It seems the wires (cable) of the K1 button got shorted with other components inside of the controller. Please take apart the controller again and rearrange the wires of the kit and to see if the problem stands still.
Hi there
I have a problem with mine. After installing the kit my l2 controller doesn’t work and I found how to fix it by moving the flex ribbon on the kit board but after I put it back together my l2 start acting on its own sometimes it doesn’t work
Hello, we are going to investigate this issue, you are the 3rd customer reported this. Please take off the kit and wait for our result, once we found the reason, we will let you know how to fix or send you the replacement. Thanks
By the way, is the plastic part of the analog sticks on your controller are yellow?
@@ExtremeRate no its green
@@Cozme909 Then it must be the orange flex problem. Please re-install it and make sure the screw of the controller mainboard was fixed tide enough. If the problem still, please let us know your order number via email to service@gamingcobra.com, we will send you the replacement of the flex for you to try again, thanks
@Sauce guy Problem is still from the orange flex connection, you have to align it correctly and then fix the screw on the controller mainboard firmly. When you press L3 the L2 reacts, because the orange flex moves when you give pressure on the mainboard, and the L2 connection point on the flex thinks you were pressing it.
when is the ps5 version going to come! very interested
We are working on it, please stay tuned!!!!
@@ExtremeRate sounds good I can’t wait.
@@Ash-126 ;)
Do u have to do the trigger stops
What do you mean?
If you just want back buttons only you might be better off with the v1 mod kit, or yeah you could install this without the trigger stops.
The v1 kit combined with the clicky kit is a fantastic combo
how can u see the blue light come on when u have a screw there?
Lol different hole. No pun intended
Why i cant find the produkt on your amazon website
Where are you from?
ExtremeRate from germany
@@ValdrinMusa www.amazon.de/dp/B08F7J2GPS
by the way I hope the back button switches can be replaced with higher quality,one of my v1 buttons stopped working after 2 month then I replaced a same new one.
There are spare K buttons in the kit now
ExtremeRate yes I did that,thank you
Do you have to solder for this? Or is it only for l3 r3 and touchpad?
It only for L3 R3 and touch pad. Please refer to from 05:07 to 06:24, left part is solder option, right side is non-solder option
ExtremeRate ok thanks for informing me :)
@@migvfxx8067 You are welcome ;)
I may have missed something, but for the back buttons, is there any solder required? Or is it plug and play type?
Is this the project you guys were talking about 2 months ago or what? Or will you guys release the other ps4 project later on?
September!!!
If I'll cut R3 AND L3 I can't use anymore? I mean I don't what sold them
You can solder the wire back to the PCB when you need them
I am getting some very strange glitches after installing. Can you recommend what to do? Glitch #1. My L3 button now seems to be crossed/combined with L2. Every time I press L3, it is as if I am pressing L2 and L3 at the same time. Even if I unmap my L3 button to nothing in game, pressing it still seems to trigger a L2 press. I thought my original controller was broken, so I installed the remap kit on another controller, and same thing. I did not solder the L3 and R3 wires to the motherboard, and neither back button was mapped to L3 or L2. Glitch #2. I tried mapping my right back button to left on the D-pad, which temporarily breaks that button on my controller, left on the D-pad won't work, and the back button won't work. The weird thing is even after resetting/unmapping the right back button or mapping it to another button, it takes a long time every time before the left on the D-pad button starts working again. Sometimes it has been 15 minutes, sometimes it has been hours. Not even pressing the reset button on the back of the controller fixes it. It will just start working again on it's own at some random time in the future. Only seems to happen with that left d-pad button specifically.
I took apart and reassembled the remap kit from scratch, and tested the buttons on PC. Now pressing L3 causes L3, L1, and R1 to all press simultaneously. And moving around the right analog stick triggers L2 to also constantly register. The FPC board looks lined up perfectly, and this is a brand new controller. Is it possible it is a faulty FPC bord? I can confirm once I unhook the FPC board, every button functions as it should.
The problem must be from the orange flex. 1. it should be aligned correctly; 2. you have to fix the screw on the mainboard of the controller firmly.Please check the above problem. If the problem stand still, please check if the 2 holes on orange flex was deformed, if so, please let us know.
@@ExtremeRate I am certain I have it aligned correctly, and the flex cable looks okay. Though it does have a crease in it where it would of bent over to the other side of the motherboard, could that be causing the problem? I have re-tried installing many times now, and it is the same every time, some buttons will work, some wont, and some buttons are as if they are permanently pressed down, with different combinations of buttons working or not working with each attempt. Is it possible I can purchase just the flex cable?
@@leeleptus Please let us know your order number via email to service@gamingcobra.com with your shipping address and UA-cam name, we will send you a new flex cable to try
@@ExtremeRate Just an update. I received the replacement flex cable, was getting the same problems. So I replaced the board with one of the extremerate V1 boards (just removed the 2 extra buttons) I had installed on another controller, and that fixed it. So it was a faulty board causing the glitching, not the flex cable.
Is there any way you guys can make round buttons for the 4 button dawn remap kit? I would definitly buy a set.
I've got both and can't get away with the circle ones, the original buttons feel much better to me. In the Dawn 2.0 you get both circle and older style to use
We may think about it
I personally prefer the old one because it looks better than the round one :)
Just finished mine. * Some advise* be careful with installation. All the ribbons from your controller are fragile. You can't screw all the screws in or the analog stick will get stuck or it will unplug a ribbon cable. You'll also need to find a sweet spot for every outer screw, the buttons/ analog stick will get stuck otherwise.
Thanks for your advice!!!!
@asdf The ones that hold the shell together
What the diff between version 1 and 2 ?
V1 has 4 back buttons, V2 has 2 back buttons & trigger stopper
I have installed perfectly the kit and it work, but i cant charge my controller and the lights of the led dont switch on when i use it
Do you mean the lightbar does not turn on? And for the charging problem, have you tried to connect the controller with your console via USB cable and check the screen immediately, if the controller starts charging, there will be a battery icon show up on the left-top of your screen. I mean I want to figure out if it's just the lightbar problem or the whole micron-USB board problem
@@ExtremeRate yes, the lightbar, if i press the playstation button the controller turn on, i can use it, but the lightbar doesnt turn on, for the charching i have used two different cable but nothing
@@alessioferro9490 Please make sure you have plugged the white flex cable in the correct direction.
@@ExtremeRate ok right now the led bar switch on but the charching doesnt work, is it possible the connector is broken ??
@@ExtremeRate is the same problem in 2 of my controller, no charching, right now i dont have controller for playing 🥺
Where could i buy this pre built?
www.hexgaming.com
I just got this along with a bunch of button kits and a faceplate to go along with it and.. I just love it so much. It's amazing. Install was nice and easy, excellent reference videos. There will be 5 star reviews and uploaded pics on the way!
Two questions though, what kind of wire is used to hook up the buttons? And where can I get some? I have not seen that in any of my local shops or online. It would be good for so many small electronics projects! I'm on a mission to find some of that wire for my work bench. Haha
I believe it's called pencil wire 😁
@@CraigsChannel
Thanks! That looks like the stuff. I was finding all sorts of enameled wire but nothing that fine!
@@markcr392 tbh it's very rarely used other than tiny little things like this. Most wire is components wire which is thicker and has the plastic seal protecting it.
Glad I could help 👍 always here if you need anything more
@@CraigsChannel
I would imagine, any sort of amperage and it would be toast! That must be why it was so hard to find, it doesn't seem to be very common. (At least in the USA?)
For small projects in tight cases, like this one, it's perfect. I have been working in the tech industry for years now and have never seen this wire before, I was going a little mad trying to find it. Thank you again! Now I can order a few spools!
@@markcr392 like I say I've only seen it a few times. I've got spare from cutting the wire for the remap and for the L3 R3 as I dont use them. I did the little install video for eXtremerate for the v1 and v2, but also the clicky mod kit which is brilliant
Sorry, it is difficult for me to use English.
I bought that product.
I've completed it, but the remapping reacts. What should I do?
Is the controller still functional?
@@ExtremeRate When I use it today, it doesn't even turn on the power of the controller.
@@ExtremeRate When I use the controller, it becomes a ripping function and the button does not respond.
@@clouz6988 Please re-position the orange flex cable
@@ExtremeRate
Is it possible to re-plug the orange cable again？
Is it the cause of double-sided tape becoming a remapping function？
Does the ps4 chat pad still have room to clip on with this?
I'm afraid not.
@@ExtremeRate have you tested it?
@@st4r444 No, but we guess it will interfere with K2 and K4 back buttons.
@@ExtremeRate the older kit with 4 buttons I can see interfere but this kit with stop trigger and 2 back buttons there seems to be some room
@@st4r444 ok, I will check if we have the chatpad in the office and check the compatibility once we finish our holiday.
for the ps5 controller in the feature?
Sure
Hey eXtremrate i bought my dawn remap kit 1.0 and dtfs led kitnto install together and they both dont work
Hi, could you please describe the problem in detail?
@@ExtremeRate there was the problem with the remap kit that the pcb broke when it was getting installed and the leds dont want to work at all
When's the V3 coming out?
No V3 but another project, in this month, Oct :)
@@ExtremeRate by another project do you mean another Remap kit for the PS4 or something else?
@@aquaarmour4924 Another remap kit :)
@@aquaarmour4924 Thank you, and that killing us too, we are expecting to hear the feedback from customers about the new kit no matter positive or not :)
My pad keeps going into the remap mode randomly, I've alredy cut the sensor wire and it works fine fore few months but not any more. Now it keeps doing it several times during a game and honestly it is pretty annoing. Do you have any idea on how to fix this problem ? I bought a new kit because I love it and I cannot play without it anymore. Nevertheless, I want to be sure that this problem will not happen again or at least understand how ti fix it !
I have this problem right now very annoying. I used the sensor for a while and I keep getting into the remap because i lay the controller on my leg so i opened it up and got rid of the sensor now mine goes in and out of remap at random
Please try to cover the soldering dot on the remap board completely, it works in most of the case.
@@furkank3930 Please try to cover the soldering dot on the remap board completely, it works in most of the case.
@@ExtremeRate I already opened up my controller and did everything again. It works now thankyou for the reply✌🏼
@@furkank3930 That's great!