In your case, the type-c upgrade will cause you to lose light functionality, but 1 yr later there are premade drop-in PCB replacements now that support the RGB fuctionality
Muy buen video me sirvió mucho lo único que consideró innecesario fue cortar la conexión de la batería original para soldarlo en la otra batería porque en AliExpress venden unas baterías igual y del mismo tamaño que las originales solo que con mayor capacidad y son compatibles tanto con PS3 como con PS4
Hello, it fits perfectly. I just noticed that this particular USBC port has no resistor, but I remember when I bought them first time there was a small resistor on the other side. But this port from the second order and there is no resistor.
all of that is great, now can you figure out why the controller just decides not to charge, sometimes??? It's like unless it's almost dead, it won't charge. The port works fine, i've even tried the ext port, if it's not near dead, won't charge...
Dude, the original shell is jds055 but the transparent shell is jds040 or something even earlier, there are some differences between them. Anyway, nice video. Btw, when I saw the Chinese characters on that blue plastic board and the controller code ZCT2NA, I recognized that you were in China lol.
Excuse me, can you tell me how about the pin definition at 6:29? I have a jds-055 too but I don't know the pin definition of microUSB, Thank you so much.
Great video! Can you please explain what each individual pin does on the jds-055 please e.g ground, 5v, data +, data - (As you look at the board with the 5 pins, the extended section of it is on the left)
6:53 "Dremel" is what you are looking for. 6:06 I'd use a bigger wire than I used in this video. 5:21 Yep, You can do it with a soldering iron but with a hot air gun, it gets faster.
i also want Maglev triggers and Analogue sticks :3 with force feedback so you can create step paths for the triggers and stick all one needs to do is aquire wholesale all the items and sell them as a package kit that has too be a chunk cheeper then SCUFF controllers. atm annoyed i can't dock my phone to my controller and use the offical backbuttons (for elden ring on the can)
how to identify VBUS , Ground , D+, D- on both dualshock4 charging port PCB and type c PCB without multimeter ? and did you add any resistor to the type c pcb ?
With the battery replacement mod, can you still use the touchpad clicker on the custom DualShock 4 controller? I did the battery replacement mod (103450 LiPo 2000mah) in my JDM-011 controller and it bulges, I can screw it firmly but the touchpad clicker no longer works; it's fully pressed.
So I did the same things, but I want to take it to the next step. I want the USB-C mod WITH the LED in tact. Any thoughts? Maybe displace it with some wire too? What LEDs would be easier to work with? Also, what temp did your heat gun put out? I have to say, this is one of the cleaner videos of the mods for this controller though! I'm also thinking of making the speaker a mic instead. anyone seen that done yet? I have been looking for thoughts on it.
Hello. 1) yep, you can try to displace it with wires . I didn’t have time to figure it out. Or, you can buy this kit and solve this problem www.ebay.com/itm/303727561873?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1iIRKqfUXSHuvQQtVBlgkNQ23&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=303727561873&targetid=1262375642056&device=m&mktype=&googleloc=9003540&poi=&campaignid=15275224983&mkgroupid=131097072938&rlsatarget=pla-1262375642056&abcId=9300697&merchantid=223147745&gclid=EAIaIQobChMI4Z6qgMKZ9QIVMQeICR23qwDHEAQYASABEgJiU_D_BwE Do you want to replace the speaker with a microphone?
@@ReMARKCHANNEL that's a lot more LED than my eyeballs have ruin for lol. I will probably just displace it with wires. As for the speaker, have that as a mic all built in because the speaker is pretty useless, at least when used with a PC. Then you could have a nice hobbiest controller, and unless you have a button mod for the bottom half of the case, a 3000 mAh battery will fit with the bracket removed and something to protect it from solder pins. However the 2000 mAh battery already doubles it, and has the bracket in tact.
Amazing job Man, didn't know you could upgrade the battery. I have a question though, is that USB port the only one that could be used or can I use a different type of USB C port ?
Well, The lightbar is gone. I would say that I did this on purpose because mostly I play at night time and I don't like the light from the DS4. However, I'm pretty sure that it's possible to save the lightbar, I just haven't tried.
aliexpress.ru/item/1005002919536938.html?spm=a2g0o.productlist.0.0.357319f6dwPxvl&s=p&ad_pvid=2021071822360011096433283158960000068757_3&algo_pvid=0da8d58e-2b92-4b21-8fed-5ea935dcaa52&algo_expid=0da8d58e-2b92-4b21-8fed-5ea935dcaa52-2&btsid=0b8b15c416266729606531544ee769&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ here you are
Hello, I can upgrade your controller but you have to send it to me (Beijing, China). Or search on Aliexpress.com, there are plenty of different connectors. I buy all the parts from Taobao, but unfortunately for you, it is a local Chinese online store.
Sure, but I bought this from Taobao, it’s a local Chinese online store. You can search on AliExpress. 7👈！RBUzX8FEeLn微 m.tb.cn/h.4DtiLr9?sm=dae32d TOOME充电式手持电磨笔电动打磨机抛光雕刻机小型全自动迷你手钻
@@rocketman9301 There is not much space in that area for USB C and LED, you can resolder LED from another side, but I decaded to keep it like I did. If you have enough time to make it, please share the video. I would like to see.)
Also type a port gets lose or degrade a lot quicker on the ps4 controller im here to mod my ps4 controller to type c but I just might buy a ps5 controller
@@ReMARKCHANNEL those tiny soldering joints look very tough, and small. Easily can cause a short since joints so close and tiny together. You got skills.
Hello! I use google translate, sorry if the text is "illiterate" Please write the exact name of the USB Type-C board you used to replace the connector. I want to do the same for myself =] I will be very grateful!
@@ReMARKCHANNEL Так ты русский? =] В любом случае твоё видео - единственный мануал в сети, где реализована эта простая, но гениальная идея =] спасибо! Буду ждать!
You should’ve cut the battery wires further from the battery, now if you ever want to use them for future projects, you will have an awful time trying to solder it
Sure, here you are 277,72 руб. 29％ Off | 103450 3.7V 2000mAh Polymer Lithium Rechargeable Battery jst PH 2.0mm 2pin plug for Camera GPS navigator MP5 Bluetooth Headset a.aliexpress.com/_veUjJK
In your case, the type-c upgrade will cause you to lose light functionality, but 1 yr later there are premade drop-in PCB replacements now that support the RGB fuctionality
Hi, where did you find the usb c boards?
@@jorelplay8738 hay un youtuber que hizo las pcb y las vende con el usb c instalado, es una placa totalmente modificada
cant find any
@@Yoimiya-k6x ua-cam.com/video/o9IACHF22yc/v-deo.html he is restocking about once a month or two.
@@Yoimiya-k6x The channel is called Marius Heier
You Start A Business Doing This I’ll Buy I Hate Micro USB 🤦🏾♂️
Add me on Instagram, I will make one for you.
@@ReMARKCHANNEL how much
@@alvinf.__ 100$ plus delivery
@@ReMARKCHANNEL is that oveprice
@@alvinf.__ well here in China the price for new original controller is 50$
I love the new charging port
Great job. Looking to do this to my controllers so great video to learn from. Thanks.
Thanks for watching
@@ReMARKCHANNELwhat’s the diagram for the usb c connection?
Beautifully made and informative vid! Your cat is the cutest!
Thanks, but usually she is naughty and making mischief.
what a great job
Thanks
Nice this good PS4 Controller USB-C ASMR
Muy buen video me sirvió mucho lo único que consideró innecesario fue cortar la conexión de la batería original para soldarlo en la otra batería porque en AliExpress venden unas baterías igual y del mismo tamaño que las originales solo que con mayor capacidad y son compatibles tanto con PS3 como con PS4
Muchas gracias, amigo. Supongo que tenía prisa.
Good work, and good vid. But how can a bigger battery fit inside...
Also did that usbc port you added have a resisitor on it? A 5.1k resistor?
Hello, it fits perfectly. I just noticed that this particular USBC port has no resistor, but I remember when I bought them first time there was a small resistor on the other side. But this port from the second order and there is no resistor.
Awesome! videos are getting better-and cuter-each time!
透明なので振動モーターが見えるね👍️
透明なシェルにもとても満足しています。それが鍵でした。振動モーターが作動しているのを見たかったのです。
日本語での返信 感謝です！チャンネル登録しました。また見させていただきますね。
@@R2D2sw どういたしまして
ASM tech is now my go to
I'm afraid I didn't get that. What do you mean?
all of that is great, now can you figure out why the controller just decides not to charge, sometimes??? It's like unless it's almost dead, it won't charge. The port works fine, i've even tried the ext port, if it's not near dead, won't charge...
Dude, the original shell is jds055 but the transparent shell is jds040 or something even earlier, there are some differences between them. Anyway, nice video. Btw, when I saw the Chinese characters on that blue plastic board and the controller code ZCT2NA, I recognized that you were in China lol.
Hi, yep you are right they are a bit different. And yes I live in Beijing so all my consoles are Chinese.🙃
That's good one. mark
So what's next ?
Ps3 SSD UPGRADE ?
PS2 MOD CHIP .MC BOOT?
PS3 YLOD REPAIR (TOKIN CAPACITOR)?
OR .....????
My ps3 is overheating and I guess I will deal with that .
Excuse me, can you tell me how about the pin definition at 6:29? I have a jds-055 too but I don't know the pin definition of microUSB, Thank you so much.
Ok, so you mean micro usb pins: 5v, data -, data+, mode detection, gnd.
Great video! Can you please explain what each individual pin does on the jds-055 please e.g ground, 5v, data +, data -
(As you look at the board with the 5 pins, the extended section of it is on the left)
Ok, so you mean micro usb pins: 5v, data -, data+, mode detection, gnd.
From the right side
Does it still sync to PlayStation consoles after this?
2023 and i have a issue, i need to know how is the pinout of 6:29 for the micro usb side from top to bottom pls
How did u make it rumble like that?
what the tool name 6:53
6:06 can I use any cable right ?
and 5:21 I can do it without hot air or not
6:53 "Dremel" is what you are looking for.
6:06 I'd use a bigger wire than I used in this video.
5:21 Yep, You can do it with a soldering iron but with a hot air gun, it gets faster.
What a clean job. Nice 👍
Thanks man
i also want Maglev triggers and Analogue sticks :3
with force feedback so you can create step paths for the triggers and stick
all one needs to do is aquire wholesale all the items and sell them as a package kit that has too be a chunk cheeper then SCUFF controllers.
atm annoyed i can't dock my phone to my controller and use the offical backbuttons (for elden ring on the can)
Awesome job there
You are an artist sir
thank you sir
I’m the 200ty sub🥳
Nice work brother
how to identify VBUS , Ground , D+, D- on both dualshock4 charging port PCB and type c PCB without multimeter ? and did you add any resistor to the type c pcb ?
Cat! :D Also, where could I get that rubber mat?
Aliexpress bro.
Amazing work!!
hi, do you think that battery would work on a psp go?
I'm not sure about the size, but if it has the same characteristics it might work
I have a question pls will it charge faster? Or nope the same !and why? thanks alot
The same .
With the battery replacement mod, can you still use the touchpad clicker on the custom DualShock 4 controller?
I did the battery replacement mod (103450 LiPo 2000mah) in my JDM-011 controller and it bulges, I can screw it firmly but the touchpad clicker no longer works; it's fully pressed.
Hello, yup it still works, the battery doesn’t affect the touch pad in my case.
LIPO BULGE is a death stroke. it may explode. reand up on lipo bulge
So I did the same things, but I want to take it to the next step. I want the USB-C mod WITH the LED in tact. Any thoughts? Maybe displace it with some wire too? What LEDs would be easier to work with? Also, what temp did your heat gun put out? I have to say, this is one of the cleaner videos of the mods for this controller though! I'm also thinking of making the speaker a mic instead. anyone seen that done yet? I have been looking for thoughts on it.
Hello.
1) yep, you can try to displace it with wires . I didn’t have time to figure it out.
Or, you can buy this kit and solve this problem www.ebay.com/itm/303727561873?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1iIRKqfUXSHuvQQtVBlgkNQ23&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=303727561873&targetid=1262375642056&device=m&mktype=&googleloc=9003540&poi=&campaignid=15275224983&mkgroupid=131097072938&rlsatarget=pla-1262375642056&abcId=9300697&merchantid=223147745&gclid=EAIaIQobChMI4Z6qgMKZ9QIVMQeICR23qwDHEAQYASABEgJiU_D_BwE
Do you want to replace the speaker with a microphone?
@@ReMARKCHANNEL that's a lot more LED than my eyeballs have ruin for lol. I will probably just displace it with wires. As for the speaker, have that as a mic all built in because the speaker is pretty useless, at least when used with a PC. Then you could have a nice hobbiest controller, and unless you have a button mod for the bottom half of the case, a 3000 mAh battery will fit with the bracket removed and something to protect it from solder pins. However the 2000 mAh battery already doubles it, and has the bracket in tact.
So satisfying 😌
Is there a way to connect the usb wire directly on the board? I'm tired of port getting lose.
Use epoxy resin to attach the port.
@@ReMARKCHANNEL I've thought about it. But I wanted to know if there is a way to connect the wire directly to the board.
@@kuroyami6289 yes, 4 pins gnd, data + , data -, V+
@@ReMARKCHANNEL Thank you. I'll try it out.
Does it still hold up 1 year later?
Yep, still works. Only got a few small cracks on shell.
@@ReMARKCHANNEL awesome, thanks for a good video i will probably try this!
Are there any good analog replacements for PS4?
Amazing job Man, didn't know you could upgrade the battery. I have a question though, is that USB port the only one that could be used or can I use a different type of USB C port ?
Hello, you can use any usb c that you have.
How exactly can i remove the old port if i dont have this hot air thing? Can i just get it of by force or will i break something this way?
You can use soldering iron. If you use force you most likely will destroy the pins on the board.
Nice mod and nice cat. China number one!
Does with this battery actually type c upgrade charges faster?
Nope, it’s gotta be the same
idk if anyones reading this but im getting a glacier white controller such as this one but IDK what frontal plate color would work nicely. ideas????
is nice, but what about the lightbar LED?
is there a way to reposition the port board?
Well, The lightbar is gone. I would say that I did this on purpose because mostly I play at night time and I don't like the light from the DS4. However, I'm pretty sure that it's possible to save the lightbar, I just haven't tried.
@@ReMARKCHANNEL i might look for a cheap ps4 controller off ebay just to try ...
@@victormanx Leave a message at the end. I would like to know.
@@victormanx so did this happen? Once I get my USB-C ports in, I'll be doing this and plan to try it.
What size wire did you use for the USB-C PCB, 30 AWG?
Yep, AWG30
@@ReMARKCHANNEL The DS4 needs 0.8A to charge and 30AWG wire is good for 0.142A, are you sure this is safe?
@@bettergamingchairwins2442 thanks to you I studied the dependency tables, will pay more attention in the next videos
And the led light?
Can this only be recharged?
Seria muy bueno que explicaras donde conseguiste todas las cosas!!!
Ali express amigo
Nice mod! Subbed👍
thanks
Nice job!
What screwdriver do you use?
Hello, check out my store. aurorabank.store/products/24-in-1-screw-driver-set
Do you have link to buy yout screwdriver ??
Sorry for the late reply . aurorabank.store/products/24-in-1-screw-driver-set
What is the larger of the wire for the USB c connection? 1.5 mm?
AWG from 20 to 28 are used in USBC. It s up to 100W 20V
Nice work! thx
pet the kitty for me plz)
sure, no problem.
Very lovely cat 👍
How much longer is the battery life?
2x
Title should be “ASMR controller mods.”
U will rise soon 😉keep it up
Thanks man, I hope so.
Nice mods. Great video
Thanks man
how(where) did you get the usb c docks ?
Aliexpress man=)
Where did you get the 2k mha battery?
aliexpress.ru/item/1005002919536938.html?spm=a2g0o.productlist.0.0.357319f6dwPxvl&s=p&ad_pvid=2021071822360011096433283158960000068757_3&algo_pvid=0da8d58e-2b92-4b21-8fed-5ea935dcaa52&algo_expid=0da8d58e-2b92-4b21-8fed-5ea935dcaa52-2&btsid=0b8b15c416266729606531544ee769&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ here you are
@@ReMARKCHANNEL UUUUUUUWWWOOOOOOOOO SEGGGGGGS
I need identik name for USB type c..because i have search on market place.thanks
Got a link for where you bought the battery?
aliexpress.ru/item/1005002919536938.html?spm=a2g0o.productlist.0.0.357319f6dwPxvl&s=p&ad_pvid=2021071822360011096433283158960000068757_3&algo_pvid=0da8d58e-2b92-4b21-8fed-5ea935dcaa52&algo_expid=0da8d58e-2b92-4b21-8fed-5ea935dcaa52-2&btsid=0b8b15c416266729606531544ee769&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
Does 10mm battery really fits in there with no modification?
Actually I thought the same , but at the end no problem with that.
Where did you get that tool set??
Hello, You mean the screwdriver and socket set?
store.mi.com/in/item/3202100013
I bought it from the official Xiaomi store in Beijing.
Which game was that at the end?
Life is strange
What's the benefit of changing the charging port?
Hah, it’s just for fun
Micro USB tears up so easy, and can be plugged in only one way. USB-C makes it all better.
Satisfying video! Do you sell any modded controllers? I'd love to buy something
Hello, which country are you from?
@@ReMARKCHANNEL US
@@Dylan-kw8pz add me on Instagram :)
I did not want to comment, but I want you to know that I'm touched how engaged you are to answer.
It's always a pleasure to answer.
Do you offer this service? if not, where did you get the Type C plugs?
Hello, I can upgrade your controller but you have to send it to me (Beijing, China). Or search on Aliexpress.com, there are plenty of different connectors. I buy all the parts from Taobao, but unfortunately for you, it is a local Chinese online store.
How come the motor spinning?
Cool video, thanks, where did you source the parts?
Hello, taobao and Ali express
@@ReMARKCHANNEL sweet, thanks
Can I get a link to the dremmel you were using?
Sure, but I bought this from Taobao, it’s a local Chinese online store. You can search on AliExpress.
7👈！RBUzX8FEeLn微 m.tb.cn/h.4DtiLr9?sm=dae32d TOOME充电式手持电磨笔电动打磨机抛光雕刻机小型全自动迷你手钻
The brand name is “Toome”
The led still working ?
Well yes, it works, but I moved the led into the right corner, so it is not in its place. Anyway I can see the light through the transparent shell.
@@ReMARKCHANNEL Do you know i way to keep the led because i d'ont have transparent shell
@@rocketman9301 There is not much space in that area for USB C and LED, you can resolder LED from another side, but I decaded to keep it like I did. If you have enough time to make it, please share the video. I would like to see.)
@@ReMARKCHANNEL I will try but i never did this type of work before. I'll tell you if it work
Great video!
Thank you so much
Muito bom! Very good!
Thank you so much
Absolutely amazing video. Would you consider selling me a finished controller? Thank you
I would love to, but the price for delivery will be crazy I suppose 😁 (I’m in China).
Nice. Is that v1 or v2 controller?
Hello, v2
You should keep the light bar
Is this the JDS-040 board?
yes, it is.
@@ReMARKCHANNEL working on jds-055 ?
@@iMujx gotta be, all pins are the same.
Все очень красиво и эстетично, удачи 🍀
не понятно, зачем менять порт на usb type c?
@@alexeyshmelev2392 micro usb устаревший и неудобный разъем, в разы приятнее иметь usb type-c
But why change the port to the usb type c?
There are always usb c port lying around but to find an old micro usb is a bit challenging.
@@ReMARKCHANNEL I see. we have micro usb in every store
Also type a port gets lose or degrade a lot quicker on the ps4 controller
im here to mod my ps4 controller to type c but I just might buy a ps5 controller
This is soo neat
Where do u get wires from pls tell me
An old usb c cable🤫
@@ReMARKCHANNEL u don't buy them from anywhere?
@@topfootball1775 nope, u can search on AliExpress but I prefer to recycle 😀
@@ReMARKCHANNEL what are they called?
@@topfootball1775 Let's shop together on AliExpress with new user coupons
Your 358,32 руб. in coupons are here!
a.aliexpress.com/_u8JG0i
Nice, no lights though but nice nontheless.
You're a legend. :)
Thanks
@@ReMARKCHANNEL those tiny soldering joints look very tough, and small. Easily can cause a short since joints so close and tiny together. You got skills.
Всё хорошо сделано, но ты лишился подсветки геймпада, переместив оригинальную плату зарядки в правую часть корпуса.
спасибо, да верно.
just awesome!
do you have a link for the usb-c pcb?
1👈！AFLBXQhjunF嘻 m.tb.cn/h.4Bsg6jG?sm=3a0360 TYPE-C母头 带板母座 正反插 USB 3.1 DIY键线分离PCB板四个焊點
Hello! I use google translate, sorry if the text is "illiterate"
Please write the exact name of the USB Type-C board you used to replace the connector. I want to do the same for myself =]
I will be very grateful!
Да не вопрос, найду, отпишу.
@@ReMARKCHANNEL Так ты русский? =] В любом случае твоё видео - единственный мануал в сети, где реализована эта простая, но гениальная идея =] спасибо! Буду ждать!
Buy batery shell and usb-c ?
What do you mean?
You should’ve cut the battery wires further from the battery, now if you ever want to use them for future projects, you will have an awful time trying to solder it
Hah, it’s a dead battery 😁
@@ReMARKCHANNEL oh, that makes more sense, alright
Bro, ur parents know how speacial you are ? damn some day i want to be like you
Nice mod but the beautiful light is gone now
Do you sell these?
I guess the delivery will be crazy expensive
@@ReMARKCHANNEL yeah 😂
lights?
Nope
👏👏👏
thanks
work on pc with wire ?
Yep, it works.
@@ReMARKCHANNEL thx
Link for the battery?
Sure, here you are 277,72 руб. 29％ Off | 103450 3.7V 2000mAh Polymer Lithium Rechargeable Battery jst PH 2.0mm 2pin plug for Camera GPS navigator MP5 Bluetooth Headset
a.aliexpress.com/_veUjJK
I which if the controller wasn't micro usb
Bro failed at the RGB led, he changed the place of the org power connector, making the led obsolete 😂