I built my first FM Radio jammer 40 years ago, I remeber I used 3 transistors, a cap and few resistors and hand made antenna - the jamming reached about 20 meters far and I could jam people near me who were listening to FM radio.
I dont know anything about electronics, but first seconds in the video I knew that this man is a real deal! Ima subscribe. If you want to learn something from electronics, than this is a pure gold to learn from
Well, no. This is not the guy to learn from if you really want to learn, sry. If you wanna learn you should check out the engineering mindset's channel. but if you just wanna have fun watching others do and make cool stuff I would recommend kre osan
*A high amperage spark-gap has WAY more power and range and works by spinning a carbon slip ring with gaps cut in the copper hooked to a 12 volt car battery using a cone-wound antenna all in series. This is what the Titanic used for Morse-code, Simple!*
I prefer sparkgap generators. They just blast signal across the whole RF range, snuffing out whatever's around. Need more range? Give it more power! Just have a fire extinguisher nearby.
also does this program work with an adafruit pro trinket 5v?
4 роки тому+11
If you have to ask questions like that, you shouldn't attempt to build or operate a device like this. And no, of course a little 433 MHz transmitter won't block your neighbour's radio.
Be very careful with this stuff. There's a lot of hazards inside of microwaves. Styropyro makes a vid that includes it. "If you touch this, you d13. If you touch that, you d13. If you break this and breathe the dust, you d13".
This is going to be useful information for anybody fighting world war III. Anyone who doesn't want to keep looking over their shoulders, watching for a drone with a bomb in hand. No drones allowed in my vicinity from this point forward.
Yes but you need to still have the ground connected to the arduino as well as the 12v source. Be careful when you set it up there is no reverse protection I have let the magic smoke out of a few transmitters through stupid wiring.
Hi Can you please explain which parts needed and how to assemble DIY relay signal amplifier. The unit used in the show how they relay the car signal using a long range rfid reader
Noob question... Can I maybe like.. mod this to carry like... 8, 3.6v lithium ion batteries? And like idk, completely block frequencies between Ø.3 and 6.2 GHz? Possible? Not possible? Potential problems?
It's me the guy who asked a question about drone jammer....this is the similar type which I have done for jamming a wifi....but it didn't work on a drone
The Arduino IDE says "success. saved on your online sketchbook and done uploading rfj_file." avidude done. Thank you. I got the code correct, however Im not transmitting. Is it possible I have my pins connected to the wrong ports? The vcc, gdn, are correct. The data pin to transmit is 10-csn, 11-mosi, 12-miso, 13-sck. Is this correct?????????? Thanks
So if vehicles pass my house with crazy loud music, would this device make their audio drop out as they passed by? Does it work for just radio or would it also help with satellite radio? What about if someone is streaming audio from their phone such as spotify? Is it directional?
well with my last breath i tried without any software, just the arduino hardware and 9v battery on SDS sharp airspy. Without programming but with the 433mhz chip it shows a signal. Maybe thats hopeful for you. However it does not jam the car key or door bell yet. Please, i know what its like to get electronic harassed, being female and no tech experience. This is simple, i will ask around if there is something for the parse library problem and if its nescesary perse. We need to help eachother when jamming is the only answere. maybe i have to delete this but then i hope u get the information. So again: get sdr sharp airspy with a dongel and then you see an incoming singal even without programming the chip. Hope to god this works thanks dear bye
You can get a research licence, I am not sure if there is a form I just emailed them explaining the kind of things I was testing and my experience to know how to do it safely
Its a nice video, but we tried the same procedure through arduino boards. But , we faced one issue in dumping the code on to the board but the code is error free . avrdude: ser_open(): can't set com-state for "\\.\COM7" Failed uploading: uploading error: exit status 1 , Please address the issue
Can you do a video of creating a jammer using an old cell phone? Or create a radio frequency jamming devices or techniques, that disrupt the drone's control signal? Inquiring minds wanna know😊
I'm having trouble uploading the radiohesd file to the editor library. Get the message ' libraries that could not be imported' Parse library. properties :library. Properties not found.?
need a broad spectrum jammer for EMF/ RF... need to purchase a thorough one; one that jams/ blocks in house RF and EMF; any ideas as to which common place one is best; alternatively, can anyone make me one.. ? :)
Bro I really have no idea how to make one. I need AM and FM frequency jammer. A good one that will be able to block even big antenna. Is it possible to buy one ?
3 роки тому
If two planes full of people collide because of your intentional interference, will you be happy with that? Do NOT use or build jammers. Not only it's highly illegal, it's the lowest of low, only absolute trash scums do it.
Hi, sorry my English is not good, I have a question, do you know how do a jammer Bluetooth with Arduino, I have the module Bluetooth, but I don't know if is possible, thanks bro
This module it is fixed. There may be a way of changing it. But there are equally as cheap modules which can be changed I have another video on that :)
I have, I am just waiting on some connectors coming in the post. I have two, one is around 9Watts and bought off the shelf. The other is 45Watts which I have yet to finish building.
Can you make me a jammer that blocks radio signals going out. IE from the transmitter. The frequency will be in the picture transmit spectrum. I'll buy it off you. Any price you want..
I built my first FM Radio jammer 40 years ago, I remeber I used 3 transistors, a cap and few resistors and hand made antenna - the jamming reached about 20 meters far and I could jam people near me who were listening to FM radio.
I ve a college project of 5 w 20 mtr jammer... Pls help me to design
@@godsowncalicut1438 hope firas found a way to reply out side comments if it wasn't your thesus
I made 100w and all city was jammed cca.40yrs ago...
@@alexander19681 Bravo to you
@@alexander19681 Sure buddy
Also, to the people looking over my UA-cam, don't worry I'm not gonna pull a watch dogs, I'm just fascinated by ECM's EMP's and just overall tech
Same youtube
Exactly UA-cam
I dont know anything about electronics, but first seconds in the video I knew that this man is a real deal! Ima subscribe. If you want to learn something from electronics, than this is a pure gold to learn from
Well, no. This is not the guy to learn from if you really want to learn, sry.
If you wanna learn you should check out the engineering mindset's channel.
but if you just wanna have fun watching others do and make cool stuff I would recommend kre osan
@@GenessireX but the gloves... they're fingerless...he has to be a real deal cyberpunk...
@@skriznacrunthunner2178 😂
Ima learn english
*A high amperage spark-gap has WAY more power and range and works by spinning a carbon slip ring with gaps cut in the copper hooked to a 12 volt car battery using a cone-wound antenna all in series. This is what the Titanic used for Morse-code, Simple!*
I prefer sparkgap generators. They just blast signal across the whole RF range, snuffing out whatever's around. Need more range? Give it more power! Just have a fire extinguisher nearby.
This guy is like the super nerdy gadget guy who gives you side missions to do on GTA
hypothetically, could this prevent my neighbors radio from playing trashy music?
Hypothetically....No it's too low power
@@Brains933 but if it were closer to said radio? is there a way to up the power?
also does this program work with an adafruit pro trinket 5v?
If you have to ask questions like that, you shouldn't attempt to build or operate a device like this. And no, of course a little 433 MHz transmitter won't block your neighbour's radio.
Lovely intro
Now I can shut down my neighbors drunk parties that last until 3 am
"We Jammin, we jammin the night away, we jam and we jam and we jam and we jam..."
Came here after seeing that Candy Crush used light-up drones to advertise themselves over NYC. Purely a coincidence that I'm here, promise.
Northern Irish too! Yeooo, keep up the good work mate.
Very good video. I built a 1200 watt drone jammer using a microwave oven magnetron tube.
How did u do it ?? i would like to build one .
@@jddomino6230 Here is the video link, I show how I built it.... ua-cam.com/video/Md5ohtb_lt0/v-deo.html
could you do a tutorial ?
@@rodriguezfranco3839 Here's the link.... ua-cam.com/video/Md5ohtb_lt0/v-deo.html
Be very careful with this stuff. There's a lot of hazards inside of microwaves. Styropyro makes a vid that includes it. "If you touch this, you d13. If you touch that, you d13. If you break this and breathe the dust, you d13".
about that antenna you put on frequency generator.plz specify the number of turns for jamming 1800 and 2100 mobile signal frequency.
What would I need if I use a trimmer capitator 5pf-20pf. I wanting to adjust it to jam the right signal..
will this jam remote controlled garage doors?
It can do.
So all you need is the Arduino? The transmitter and power just affect the strength and range?
Pretty much
“Alright frank, you can unload the 50kw generator over there, and put the massive radio antenna over there.”
😂🤣
@@NPCSN I'll just leave this here...
www.amazon.com/Tupavco-TP512-Wi-Fi-Antenna-2-4GHz/dp/B008Z4DNFC
@@NPCSN And connect this matchbox at the end ;)
This is going to be useful information for anybody fighting world war III. Anyone who doesn't want to keep looking over their shoulders, watching for a drone with a bomb in hand. No drones allowed in my vicinity from this point forward.
Can you show how to make a jammer which possibly can jamm 900 MHz frequency? It's for educational purposes. cheers!
The process is the same all you need is to buy a 900Mhz transmitter for arduino
C1101 can jam that if i am not wrong.
I have a video coming out on Monday using a CC1101 as a multi band jamming device
@@Brains933 highly appreciated mate! eagerly waiting for the video! Hope it would be as great as your other videos!
@saniul Alam Nibir can you please help me making a jammer for 900mhz.
If i may ask, Whis OS are you running and what do you use to monitor frequencies?
Is it possible to get a part list and links to the sources? That would be super helpful thank you keep up the great work bro.
Could solders us it for drones
King Nerd right here 💜
Eh, I have been called worse 😅
I have the 315MHz one will this same setup work it two
Bout to do a real life need for speed race with this
Mam pytanie bo w Ameryce to zapewne działa ale czy w polsce będzie mamy troche inną tehnologie jak co
I' the honk this is awesome I'm just getting in to making jammers, any advice
Thanks for sharing. How much current does the transmitter use at 12V ?
No worries, got the datasheet.
Would that setup work with just the data pin going to the transmitter an a separate 12v going to the transmitter?
Yes but you need to still have the ground connected to the arduino as well as the 12v source. Be careful when you set it up there is no reverse protection I have let the magic smoke out of a few transmitters through stupid wiring.
can I build this to stop my annoying neighbor from playing very loud music?
Can you jam microwave signals an EMR
Love the cat, was that a cameo appearance? :-))
its been a long time since you've uploaded this, but can this device block GPS Tracker?
Would this jam a tv satellite receiver through a wall or outside?
Hi,which type of jamming that you were used with 433mhz rf module ?
I didn't get an antenna with my module, what do I do?
Hi
Can you please explain which parts needed and how to assemble DIY relay signal amplifier. The unit used in the show how they relay the car signal using a long range rfid reader
Will this jam the video cameras in my mail room?
Noob question... Can I maybe like.. mod this to carry like... 8, 3.6v lithium ion batteries? And like idk, completely block frequencies between Ø.3 and 6.2 GHz? Possible? Not possible? Potential problems?
Asking because I'm going to Ukraine in November
It's me the guy who asked a question about drone jammer....this is the similar type which I have done for jamming a wifi....but it didn't work on a drone
You are the type of guy I want on my side when shit hits the fan.
I want the hacker drone operator to be the fan that the shit hits. Because they don't give a shit about us my friend.
I just don't want to be chilling in my home when a drone comes and drops a mortar shell on me
please tell me if i built this jammer and place it next to a prepaid electric meter box, what will it do.
Nothing
Sooo.. this is for stopping someone from opening their garage door? or unlocking their car? but you have to be standing next to them.. ?
Hi I was wondering if this could be used as a eas or rf jammer? I can't say I understand all this very well.
What is it supposed to jam?
what is the name of the big circut board and were in ontario canada can i get this stuff ?
doest this work for military aiming stuff, drones etc?
What is the flying drone frequency ?
I'm a final year student I want to construct the signal Jammer how should I do, can some one assist me to do that
The Arduino IDE says "success. saved on your online sketchbook and done uploading rfj_file." avidude done. Thank you. I got the code correct, however Im not transmitting. Is it possible I have my pins connected to the wrong ports? The vcc, gdn, are correct. The data pin to transmit is 10-csn, 11-mosi, 12-miso, 13-sck. Is this correct?????????? Thanks
It is very clear but good work
What is the range of it ?
You can use a microwave oven magnetron tube to jam wifi at 2.45 Ghz :)
yeah, and risk killing yourself in the process. you transmit at 2.4 ghz. you cook FOOD at 2.45. think about it....
So if vehicles pass my house with crazy loud music, would this device make their audio drop out as they passed by? Does it work for just radio or would it also help with satellite radio? What about if someone is streaming audio from their phone such as spotify? Is it directional?
Can you tell me what does this circuit do?
Asking for a friend can this block signal for analog radio? thanks
This one would be to high frequency for most FM radio broadcasts
I get this error when trying to import the zipped library file: [] parse library.properties: library.properties not found
How do i fix this? thanks
Me too, did you find the anwere? please share
well with my last breath i tried without any software, just the arduino hardware and 9v battery on SDS sharp airspy.
Without programming but with the 433mhz chip it shows a signal. Maybe thats hopeful for you.
However it does not jam the car key or door bell yet. Please, i know what its like to get electronic harassed, being female and no tech experience. This is simple, i will ask around if there is something for the parse library problem and if its nescesary perse. We need to help eachother when jamming is the only answere. maybe i have to delete this but then i hope u get the information.
So again: get sdr sharp airspy with a dongel and then you see an incoming singal even without programming the chip. Hope to god this works thanks dear bye
@@lindavandelouw3567 where did you get the code...? Please let me know...!
If I want to jam evildoers drones or robot gps signals what frequency would be most powerful?
Sadly jamming anyone's drone or GPS is Illegal regardless of alleged evil doer'ness
I hope this can stop them little rascals from playing PUBG in front of my room, will this works for Wi-Fi signal too?
Thanks for the clip. I'm going to make one sometime. I'll let you know how it went when I get it done
What is the name of the software your using to read the radio waves and any equipment that needed to use it?
Its called Gqrx
Would this block my teenage daughter talking on phone early hours in morning and will it work with 4g/5g
Can this design support a bigger antena to jam drones ?
Does this work with 4 and 5g networks in use today?
what ofcom license would you need for this? would my ameture license be enough or is there another for this kind of thing
You can get a research licence, I am not sure if there is a form I just emailed them explaining the kind of things I was testing and my experience to know how to do it safely
@@Brains933 nice ill look into it, thanks
Can you make a wifi jammer with the arduino like you did with the other device
Are you Mute from rainbow six siege?
I never played Rainbow Sox Siege so that is lost on me lol but maybe?
Jupitrean Music good one
Would this work with R3 board instead of REV3
I love this video 🙌🏼🙌🏼👍👍
Can this block a eas alarm system at shops
would a 10v transmitter do the job ?
It depends on what the job is.
Its a nice video, but we tried the same procedure through arduino boards. But , we faced one issue in dumping the code on to the board but the code is error free . avrdude: ser_open(): can't set com-state for "\\.\COM7"
Failed uploading: uploading error: exit status 1 , Please address the issue
That's an issue with your connection from the computer to the board
Can you do a video of creating a jammer using an old cell phone? Or create a radio frequency jamming devices or techniques, that disrupt the drone's control signal? Inquiring minds wanna know😊
I'm having trouble uploading the radiohesd file to the editor library.
Get the message ' libraries that could not be imported'
Parse library. properties :library. Properties not found.?
me also, did you find a solution?
Would this jam the satellite tv signal?
You look like Peter Parker from The Amazing Spiderman
This is great. I want to jam drone signals. Can we jam drone signal from this stuff?
No you need to have a device able to go up to 2.4Ghz but these are easy to get online
@@Brains933 by device do you mean a module that works at 2.4GHz? would a standard 2.4GHz transceiver for arduino work ?
need a broad spectrum jammer for EMF/ RF... need to purchase a thorough one; one that jams/ blocks in house RF and EMF; any ideas as to which common place one is best; alternatively, can anyone make me one.. ? :)
I'm definitely speedrunnning to watchlists. But what can i do feds, I'm a curious citizen
Can you just give me a parts list and which websites to get him at Then instructions. Because I'm Completely Lost
Discription
i am trying to do your project, i am done with the framework and uploaded the code . how do i test it? , meanwhile can i have the app name of the app
Bro I really have no idea how to make one. I need AM and FM frequency jammer. A good one that will be able to block even big antenna. Is it possible to buy one ?
If two planes full of people collide because of your intentional interference, will you be happy with that? Do NOT use or build jammers. Not only it's highly illegal, it's the lowest of low, only absolute trash scums do it.
Hi, sorry my English is not good, I have a question, do you know how do a jammer Bluetooth with Arduino, I have the module Bluetooth, but I don't know if is possible, thanks bro
Hi, are these frequency locked or could it be tuned to tx on 431 or 430Mhz?
This module it is fixed. There may be a way of changing it. But there are equally as cheap modules which can be changed I have another video on that :)
Able to be used on drones ?
put it on gyroscope that triggers activation when it Dropes blanket target area for designated pranks
Have you tried the amplifier yet? Which one are you planning on using?
I have, I am just waiting on some connectors coming in the post. I have two, one is around 9Watts and bought off the shelf. The other is 45Watts which I have yet to finish building.
@@Brains933 Very cool! Keep us posted, this is a pretty interesting project!
what is the range of this device bro????
Could you please make a tutorial for making a bluetooth jamming directional device! My neighbour kills all the people with his reageton!
dumb question but should i not be using google chrome?
why is it that when i try to import the library i get error messages, nothing ever goes straight forward for me its a curse im sure, HELP ME pls.
What's the error?
how about GPS signal. Is it easy to design a jamming devise for GPS signal.
All you need is a device that can transmit on those frequencys
Thanks...
Are these devices available....
How would they know if they weren’t already spying on you?
How to increase range?
Can someone tell me what is that black thing?
How much is a beer token worth in fiat currency? Also wanna sell me one for some bitcoin?
Can you make me a jammer that blocks radio signals going out. IE from the transmitter. The frequency will be in the picture transmit spectrum. I'll buy it off you. Any price you want..
How late comes the new one out with c1101 chipset
7pm tonight
Thank you. Which timezone you got?
GMT UK time
Yo This is Cool! Thoughts on jamming a 2.4GHz signal for drones? Will it work?
I have a video talking about that. Planning to do a demo of it at some point
Is that even legal to do?
Without the right licence no it is not
@@Brains933 ok cool. Btw; very good video, i enjoyed it, rate 10/10
Thank you very much :)
Could you please let me have the code and the schematic?
I heard from a friend that the MoD were routinely jamming amateur band channels
What credentials do I need to build this?
Can you set it to block everything between 30-20,000 Hz?