Such a great video, a lot of information on this PSU, love it, thanks a lot ! I hope you'll be doing more PS5 power supply in the future, we need those !
Another great video like always,Thanks for taking the time out to do these wonderful videos sir .Keep up the great work,you're very good at what you're doing .
Another great video. Glad your still on it. I don’t know something about your video and the way you calmly explain things is appealing to my learning :)
Very interesting, informative and thank you for sharing. I found having a good board of anything I try to fix is a huge bonus in the absence of schematics but not having one can make life so difficult if is not the obvious common faults.
What a job well done! You just earned another subscriber. I have similar issue except my dc output reads zero. I followed along and got the same diode mode readings except for pins 1 and 2 of ic52 with 1.239V and 1.5V, respectively. Q32 seems fine as well. Now I'm struggling with what to do next
The best approach would be to place an identical working board beside the broken one and make comparison readings. That will usually lead you in the right direction.
As i said before, great video! Im a recent suscriber so i wanted to ask: were and how did you adquire your knowledge in electronics? Im amazed with your psu repair videos.
Thank you again! I am trained as an electronics technician and have been repairing electronics over 30 years. I only recently started working on gaming consoles. Thanks for watching and commenting!
@@ToltecMerc got my ps5 power in and after measuring off your measurements it looks like I need the dap053t. But no one has any in stock on this planet
Great video! Do you by chance have the same Readings for the 400ER supply? Also, What supplier do you use for the main IC? I can only find a "repair kit" for $40
@@ToltecMerc Thanks for the response! The TL432 Voltage references you mentioned. Do you by chance have the full part number? I dove back into my supply giving me 5.5V and found two of them with broken casings I'm on Mouser now. After you complete your videos would it be possible to list part numbers you used for the repair? I guarantee it will reduce people like me asking questions! and increase likes!
Hi, great video thank you! Helped me a lot. Question for you. I am only getting 168 volts across each of the 445 volts capacitors. Shouldn't it be 450 volts? What should I test next?
The voltage across the large caps should be 395V. If you are only getting 168V, your power factor correction circuit is not running. The 168V is simply rectified and filtered 120VAC. The PFC boosts it to 395V. On PS5 supplies, the DAP053 IC controls this by driving a power MOSFET.
@@ToltecMerc Thank you! So can I fix the PFC? or how can I bring my PS5 back to life? my neighbor's tree was struck by lightning and took out my PS5 :(
@@ToltecMerc Thank you very much sir. another question, I was testing ZD35 off IC53 and getting a reading of 2.2 ohms in both direction is this zener diode shorted and if so what is that ID? Are there schematics for this power supply on the internet?
The other major issue I am seeing is that the + and - across CN101 is completely shorted out. Would this be caused by the components that I have blown at IC52 adn shorting of DAP053T, any ideas what I check for on the cold side?
Unless it is in a very dusty environment, I would not think it would need cleaning after one year. If you want to clean it out, just used some canned air. No need to open it. If you do decide to open it, I would unplug and wait 24 hours for everything to discharge.
Hello. I searched for the much wanted power manager chip DAP053T and found that there was someone that said the TEA2016AAT/1 is the same chip and Sony just rebranded this to DAP053T. Do you beleive that?
Such a great video, a lot of information on this PSU, love it, thanks a lot ! I hope you'll be doing more PS5 power supply in the future, we need those !
I'm sure there will be more. Thanks for watching and commenting!
Another great video like always,Thanks for taking the time out to do these wonderful videos sir .Keep up the great work,you're very good at what you're doing .
Thank you very much!
Another great video. Glad your still on it. I don’t know something about your video and the way you calmly explain things is appealing to my learning :)
Thanks! That's very kind of you!
Very interesting, informative and thank you for sharing. I found having a good board of anything I try to fix is a huge bonus in the absence of schematics but not having one can make life so difficult if is not the obvious common faults.
I definitely like having a working board to compare to no matter what I’m working on. Thanks for watching and commenting!
Helped me in my repair shop. Great info on this PS5 power supply.
Glad it helped. Keep fixing stuff!
Thank you so much for sharing all of this! Awesome! Have to fix aswell a PS5 and hope i could fix it too! Please go forward like this!
I will try to bring you more soon!
Pretty good Sir.
Thank you! Glad you enjoyed!
You are a braver man than I...no power supply's here. 🤣 Thanks for the video
I love power supplies! Much simpler than the consoles they power.
You are the best Man 👍
What a job well done! You just earned another subscriber. I have similar issue except my dc output reads zero. I followed along and got the same diode mode readings except for pins 1 and 2 of ic52 with 1.239V and 1.5V, respectively. Q32 seems fine as well. Now I'm struggling with what to do next
The best approach would be to place an identical working board beside the broken one and make comparison readings. That will usually lead you in the right direction.
Another great repair:)
Thank you!
Very skilled, liked and subscribed :)
Much appreciated!
Nice repair !!! Great Video !!!
Thanks Double!
Good job mate 👍
Thank you very much!
As i said before, great video! Im a recent suscriber so i wanted to ask: were and how did you adquire your knowledge in electronics? Im amazed with your psu repair videos.
Thank you again! I am trained as an electronics technician and have been repairing electronics over 30 years. I only recently started working on gaming consoles. Thanks for watching and commenting!
you saved my day thank
I'm glad it was helpful!
Great video
Thanks!
Hey awesome info from a very informative person. I have a ps5 power supply coming in that has lightning damage hope to get it working again
Thank you and good luck with your repair!
@@ToltecMerc whats the usual components that go with lightning damage?
@@kevinmalson5836 the DAP053 is a common failure. There are several small MOSFETs marked W4R that are near the front end as well that I've seen fail.
@@ToltecMerc got my ps5 power in and after measuring off your measurements it looks like I need the dap053t. But no one has any in stock on this planet
@@ToltecMercplease where can I buy 🎉 the mosfet mark WR4
Great, great, great, great 1000x great!
Thank you so much! I'm glad you liked it.
Great video. Where can we get the DAP chip from though?
Fantastico !!!!!
Thank You!!!!!!
Looking for DAP053 power management chip for my lightning damaged ps5 psu any links to one? People are saying it is sold out
Great video as usual, whats the unit that you use for discharging, I'd like one myself.
It's called a TKDMR Sparkpen. I got if from Amazon but it probably be found elsewhere.
@@ToltecMerc thank you sir.
Amazing troubleshooting PSU are always tricky to fix. Do u have a video on slim psu were the volts go to 12 then die down?
I have the same problem. Did u ever fine the solution
Amazing
Thanks
Great video! Do you by chance have the same Readings for the 400ER supply? Also, What supplier do you use for the main IC? I can only find a "repair kit" for $40
I'm afraid not. I don't think I have encountered the 400ER yet.
@@ToltecMerc Thanks for the response! The TL432 Voltage references you mentioned. Do you by chance have the full part number? I dove back into my supply giving me 5.5V and found two of them with broken casings I'm on Mouser now.
After you complete your videos would it be possible to list part numbers you used for the repair? I guarantee it will reduce people like me asking questions! and increase likes!
@@imurhuklbrry2393 try Mouser #595-TL432BIDBZR
Mouser 771-TEA2016AAT/1J main IC.
Hi, great video thank you! Helped me a lot. Question for you. I am only getting 168 volts across each of the 445 volts capacitors. Shouldn't it be 450 volts? What should I test next?
The voltage across the large caps should be 395V. If you are only getting 168V, your power factor correction circuit is not running. The 168V is simply rectified and filtered 120VAC. The PFC boosts it to 395V. On PS5 supplies, the DAP053 IC controls this by driving a power MOSFET.
@@ToltecMerc Thank you! So can I fix the PFC? or how can I bring my PS5 back to life? my neighbor's tree was struck by lightning and took out my PS5 :(
Hey bro, Thanks for the video. I have a psu with the same readings. Can you point me to where I can buy that ic from?
Your best bet is from a Chinese vendor on AliExpress.
Great video and work. Any idea what Q32 is on the power supply it goes to IC51 that was blown. I also have shorts on DAP053T
It's a 2N7002 mosfet
@@ToltecMerc Thank you very much sir. another question, I was testing ZD35 off IC53 and getting a reading of 2.2 ohms in both direction is this zener diode shorted and if so what is that ID?
Are there schematics for this power supply on the internet?
The other major issue I am seeing is that the + and - across CN101 is completely shorted out. Would this be caused by the components that I have blown at IC52 adn shorting of DAP053T, any ideas what I check for on the cold side?
@@MKJ-ei8kt I believe ZD35 is a 9.1V 1/2W zener. ZMM55C9V1
@@ToltecMerc Thanks again. Any idea what ZD132 and C147 components are, I noticed they were blown ?
Ps5 shut op duwn hello, i have the same problem, the warranty is over, which part is causing the problem?
👍
Its a factory issue or just for long use?
does the power supply needs cleaning after a year of use? if so, how much time until the capacitors discharge?
Unless it is in a very dusty environment, I would not think it would need cleaning after one year. If you want to clean it out, just used some canned air. No need to open it. If you do decide to open it, I would unplug and wait 24 hours for everything to discharge.
@@ToltecMerc ok. thanks!
I watched it at morning.. at the end was white screen 😂
Yes. My mistake. I have it fixed now. Thanks for watching!
Hi. Thanks for video. Can I install ADP-400DR instead of ADP-400FR?
No. They are not interchangeable. The DR and ER models are interchangeable.
@@ToltecMerc Thanks.
@@ToltecMerc Can you please say what is the difference between DR and FR power suppliers?
Hello. I searched for the much wanted power manager chip DAP053T and found that there was someone that said the TEA2016AAT/1 is the same chip and Sony just rebranded this to DAP053T. Do you beleive that?
It is true. I have used it.
@@ToltecMerc this is good to know. Ive been searching for someone who can confirm this. Thank you
What's the name of the discharge tester??
TKDMR Intellect Capacitor Discharger
You should report your findings to louis rossman repair wiki because he works for a company who pays people who put in the time to repair stuff.