Turbine Eisschlitten 2024 Part II, Ice Sled with jet engine part II,
Вставка
- Опубліковано 20 січ 2024
- Hi,
So viel Spaß auf einer gefrorenen Wiese.
Mein Kumpel Hardy, hat sich mit seinen Luftaufnahmen auch ganz schön ins Zeug gelegt.
Seinen Kanal findet ihr hier.
Schaut mal rein😉
/ @hanoverview
Mfg Andy
Hi, So much fun on a frozen meadow.
My buddy Hardy also did a lot of work with his aerial photos.
You can find his channel here.
Take a look😉
/ @hanoverview
Kind regards, Andy - Наука та технологія
Das Gefährt war die perfekte Fusion von "deutsch" und "Hillbilly"!
Saugeil, da freut sich das Kind im Manne 😁
🐽 horny 😂
What I've always wanted to do was create the jet ice ski vehicle that's on 007 Die Another Day. Could be made quite a bit smaller than the original.
Geil!
i would love to build a turbine engine. can you recommend an available blueprint or plans with an easy to fabricate design for my first engine? maybe a book that will help me with the fabrication and understanding the principles?
Have you tried to make some accessories for your turbine? Like a generator, alla' aircraft APU? Or an automated FADEC Start/Stop controller via Rasoberry Pi? Cheers from another Touareg driver. 😉.
Hi John?,
No, I think I like it as it is.
I like the start procedur with my hands😅
A generator takes much power and the rpm of the engine is too high. You will need a gearbox from 70 000 rpm to ?whats needed.
The only accessory is my afterburner😉
Thank you👍
Andy
@@Praendy Hi Andy, I see. Thought maybe a generator could be driven by bleed air. Cheers!
- John.
So cool! Die hockey-schlittschuhe gefählt mir. Sie müssen die geschwindigkeit testen und die ergebnisse posten. Sehr gut gemacht.
-Jared von Die USA
Hi Jared,
Thank you! Its a lot of fun😂
The measured gps speed, you'll find at the end of the video.
There are two screenshots from the app👍
Andy
Great work
Can you share the cad design of your jet engine?
Hi,
I dont have a plan from cad designing.
All I have to know is in my head😂
Usually I like a pencil and a sheet of paper.
Andy
Technically it is impossible to do it without a design and of thrust , pressure , temp .. etc . Either you are lucky or you are a freaking genius. @@Praendy
you really should have a cad design for your engine .Because the ratio of your engine mass to engine thrust is astonishing@@Praendy
If you made a building guid book of your engine you can sell it with at least 100$ . And I am telling you I will be the first customer . If you are not interested on mony it will help a lot of people .
@@Praendy
Very nice how much thrust?
Hi,
Thrust is ~120 lbs.
Thank you👍
Andy
will you Eventually make a scale Axial turbo fan engine?
Hi,
No, but my buddy from DST Engines has built one.
Check his channel "DST Engines"
Andy
@@Praendyis it because of Financial restriction