thanks and very sorry to hear that, personally if it only goes in reverse I don't think this is a solenoid problem but a transmission mechanical internal failure
I had p0741, your is the pressure control solenoid D, either it is stuck off because it is defective, internal transmission failure or transmission is too low on fluid.
hard shifting, and some times delays but all of this was intermittent, some times it would drive even for one days with out any issues n all of a sudden it would start acting up n then go away.
normally is the solenoid that goes bad, in most cases there are No noticeable driving issues, erratic or hard shifting, in some cases you get quick acceleration even if you let the gas pedal go, thanks for sharing
@@mairasan-ud5ih no thank you for this great video, I already bought a new solenoid. I will test the ones on the rav 4 tomorrow to find the bad one and replace with the new one. Thank you for making this video.
Could all forward gears working but reverse not working be caused by a faulty solenoid, specifically in a '92 Camry with an A140E transmission? When the car's off the ground the wheels still turn in reverse, just not under load. I suspect that the problem is deeper in the transmission, just trying to eliminate this as a possible cause. I'll be taking the solenoids out soon to test them.
your description is very detailed, according to how you describe it I don't think the solenoids are the problem, it seems like mechanical failure but hope you can find the cause of the issue.
Thank you!!
Very clear explanation, thanks
Glad you liked it
Your video are very helpful..But i have a question my 99 toyota corolla only works in reverse do you think it just a solenoid problem???..
thanks and very sorry to hear that, personally if it only goes in reverse I don't think this is a solenoid problem but a transmission mechanical internal failure
Would a bad shift solenoid cause shift hesitation? Doesn't slip but hesitates from 3rd to 4th only 2005 toyota solara 3.3 auto
yes it does cause shift hesitation thanks for sharing
What code was this vehicle showing for that part I have a 2007 Toyota Tacoma that’s giving a p2714
I had p0741, your is the pressure control solenoid D, either it is stuck off because it is defective, internal transmission failure or transmission is too low on fluid.
Thanks for the video.What where the problems the owner was having with the transmission regarding the solenoids
hard shifting, and some times delays but all of this was intermittent, some times it would drive even for one days with out any issues n all of a sudden it would start acting up n then go away.
@@mairasan-ud5ih Thanks for answering .I have the same issue in my 2,2 97 Camry but no codes on OBDII
Will this solve code P2770 torque converter clutch circuit high? I have this code on my 08 Rav 4
normally is the solenoid that goes bad, in most cases there are No noticeable driving issues, erratic or hard shifting, in some cases you get quick acceleration even if you let the gas pedal go, thanks for sharing
@@mairasan-ud5ih no thank you for this great video, I already bought a new solenoid. I will test the ones on the rav 4 tomorrow to find the bad one and replace with the new one. Thank you for making this video.
Could all forward gears working but reverse not working be caused by a faulty solenoid, specifically in a '92 Camry with an A140E transmission? When the car's off the ground the wheels still turn in reverse, just not under load. I suspect that the problem is deeper in the transmission, just trying to eliminate this as a possible cause. I'll be taking the solenoids out soon to test them.
your description is very detailed, according to how you describe it I don't think the solenoids are the problem, it seems like mechanical failure but hope you can find the cause of the issue.
From where to get the warning diagram please suggest
I use alldata with subscription, I have heard that you can use this software at any library for free, thanks for sharing
Corolla did not enter revers what is the problem
check for transmission codes, noises, if no codes are found then your tranny might have failed