Why did I choose RadioMaster TX16S Mark 2 Max Edition EdgeTX

Поділитися
Вставка
  • Опубліковано 4 сер 2024
  • Discover the thought process behind my choice of the RadioMaster TX16S Mark 2 Max Edition EdgeTX Radio Controller. In this video, I explore the factors that made RadioMaster TX16S Mark 2 Max Edition EdgeTx controller stand out, from its exceptional performance and range to its user-friendly interface. Learn why this choice enhances my RC flying experience and what benefits can you get on my channel.
    Pocket EdgeTx: bit.ly/rmpocketx
    Boxer EdgeTx: bit.ly/rmboxertx
    TX16S Mark 2 Max: bit.ly/3JqzgT8
    EdgeTx Heli Models: bit.ly/edgetx16shelis
    Best RC Helicopters
    Airwolf: bit.ly/fwairwolfv3
    FW450 V3: bit.ly/3YT8qeF
    Huey UH1: bit.ly/3ugxzT2
    Bell 206: bit.ly/3HCnVl4
    FW200: bit.ly/3OYCFgi
    SeaHawk: bit.ly/yxbhrsc
    BlackHawk: bit.ly/yxblackhawk
    RC MD500 helicopter: bit.ly/48l8jhs
    Best Radio Controllers:
    RadioMaster TX16s: bit.ly/3FBQMnt
    Pocket EdgeTx: bit.ly/rmpocketx
    Boxer EdgeTx: bit.ly/rmboxertx
    Visit Our Site: createc.store
    Buy Me a Coffee: bit.ly/alicoffee
    Join Channel: bit.ly/joinalishanmaoyt
    My 3D models: bit.ly/2H3pxDH
    Helicopters Spare Parts:
    Huey UH-1: bit.ly/3SpmfPB
    FW450L: bit.ly/3m4GOVm
    F09S Seahawk: bit.ly/3lYgAUD
    Bell 206: bit.ly/3INPDw0
    FW200: bit.ly/3xPcAZn
    #radiomaster #tx16s #edgetx #radio
  • Авто та транспорт

КОМЕНТАРІ • 93

  • @fiftiesbinman2083
    @fiftiesbinman2083 10 місяців тому +3

    As a complete newbie to heli flying i was recommended this by the shop, what a learning curve to get the firmware on etc.. now I just need to learn how to fly :-) :-) your videos have been so helpful.. Now i just need to decide what Heli to buy as my trainer.. its all sim work at the moment got a long way to go i have no idea what to buy at the moment..

    • @alishanmao
      @alishanmao  10 місяців тому

      Thanks for comment. glad you are making progress. get the FW450 V3 with Airwolf Shell or Huey UH1 V3
      FW450 V3: bit.ly/3YT8qeF
      Airwolf Shell: bit.ly/3kinLXt
      Huey UH-1: bit.ly/3ugxzT2

  • @Adrian-sd8ck
    @Adrian-sd8ck 11 місяців тому

    Very nice video 👍👍👍

    • @alishanmao
      @alishanmao  11 місяців тому

      Thanks buddy 👍😀

  • @Starkman3
    @Starkman3 11 місяців тому +1

    Have you seen the RC ERA C189 MD500? I would be very interested to see your review on this heli, and most important, how to set up your new Radiomaster TX16S Mk II to link to this chopper! I'll be watching for your answer! I used one of your previous videos to set up my Radiomaster to link to the FW200. Thanks for all your help.

    • @alishanmao
      @alishanmao  11 місяців тому

      its coming. waiting for its release. Always welcome. if you like join my supporters group: www.buymeacoffee.com/alishanmao

  • @Pustul
    @Pustul 2 місяці тому

    How does the v4 gimbals compare to the mark I? Would you advise to go for the AG01 or are the plastic ones good enough in the mark II?

  • @Rcheliguy
    @Rcheliguy 7 місяців тому

    Hi Alishanmao, I myself for Christmas got the tx16s mk2 and I've got the radiomaster zorro as my current transmitter. I've currently got the m1 and m2 evo's which we're already bound to the helis when I got them as a rtf package. I absolutely love watching your videos they have truly helped me progress massively in the hobby since I started in April this yeah. I'm just wondering if your going to do any videos on setting up a model on the new tx16s mk2 that you have just like you did before with your mk1 on the m2 and goosky s2. Your video would be a great help for me. Much appreciate your time in reading this comment. All the best and happy new year. Thank you 😊 🙏

    • @alishanmao
      @alishanmao  7 місяців тому +1

      Thank you for your support and following my work buddy. Yes its a plan to use this radio and make a detailed video on 3d helicopter setup. I am waiting for Yuxiang F280 direct drive 3d helicopter to arrive. and after its reviews and flights, i will set it up with Tx16s and make a video tutorial or do a live show tutorial. however as we have moved to UAE and are in between moving and settling down, working on our residency visas and much more. it might take some time for me to find the right window to do this detailed video. but sure its in my to do list

    • @Rcheliguy
      @Rcheliguy 7 місяців тому

      That's brilliant Alishanmoa, I truly look forward to watching the video. Congratulations on the move I hope you and your family settle in well in your new home. All the best. Again thank you.

  • @jack78_
    @jack78_ 7 місяців тому

    thank you for the video,i did order the TX16S Mark II Max Radio Controller (M2)ELRS ,for the module on the back,is that a requirement or just for long range flying?,if the module is needed could you suggest a module and rec , thanx

    • @alishanmao
      @alishanmao  7 місяців тому

      if you fly Long range, ELRS should do the job

  • @qfrb97
    @qfrb97 10 місяців тому

    This video that you did for openTX was excellent, "MOST" of the things are the same on EdgeTx but there are some differences. So a remake of that video would be on my top five list.

    • @alishanmao
      @alishanmao  10 місяців тому

      For 3D RC helicopter setup? need me to do it again on this radio? i did it on Edgetx Boxer. isn't that the same edgetx hahaha

    • @qfrb97
      @qfrb97 10 місяців тому

      @@alishanmao Most things are the same the bigger color screen has some options in it that have made me uncertain. Yes for the 3D/6G helis that have the programming built into the flight controller - K110, K123, K124, K130, E120, E150, E160, E180, E200 - those are relevant to me, probably also OMP helis, FW helis, the small Align helis, Goosky helis.

    • @qfrb97
      @qfrb97 10 місяців тому

      @@alishanmao Just watched a recent "UNOFFICIAL" video on how OpenTx is pretty much dead, there hasn't been any updates for 16 months, so looks like EdgeTx is going to be the only way going forward. So, Yeah, I really would appreciate a remake of the video using EdgeTx.

    • @alishanmao
      @alishanmao  10 місяців тому +1

      @@qfrb97 Well no worries, I am working on this video. a simple step by step setup of TX16s to fly 3D RC Helicopters. One model setup that you can then copy paste and rename, bind, tweak and fly different helis :)

  • @kkhalifah1019
    @kkhalifah1019 Місяць тому

    The amount of bling it has makes it very compelling, esp those CNC hall effect gimbals. But that puts it head-on against the FrSky X18s in terms of pricing. The FrSky's tandem protocol is very tempting although its TD series of receivers are bloody expensive.

    • @alishanmao
      @alishanmao  Місяць тому

      yup tempted to tandem too but for now love my RadioMasters

  • @MitchellPetersoncustomdrone
    @MitchellPetersoncustomdrone 10 місяців тому

    Will my flywing fw200 and 450 work with a RadioMaster Zorro MAX Edition 2.4GHz 16CH Exclusive Gray AG01 Mini Hall Gimbals Leather Grips OpenTX/EdgeTX System Radio Transmitter?

  • @richarddorsch7275
    @richarddorsch7275 6 місяців тому

    Hi, I follow you and enjoy your channel. My question to you...Last month I purchased this same radio without the AG01 gimbles and after setting my volumn to max, it still in my opinion is not loud at all. I sent the radio back today believing it has a defect. Would like your opinion. The version it came with is 2.7 and was manufactured almost 2 years ago. Is all this normal?

    • @alishanmao
      @alishanmao  6 місяців тому +1

      hi there, volume on mine is also not too loud. i am ok with that.

  • @SHOGANAI55
    @SHOGANAI55 10 місяців тому

    Will this TX16s work with other receivers like Radiolink R12DS receivers.

    • @alishanmao
      @alishanmao  10 місяців тому +1

      I do not think so

  • @StingraysVideos
    @StingraysVideos 11 місяців тому

    Great video Ali! IMO...the radiomasters are simply the best radio by far hands down.

    • @alishanmao
      @alishanmao  11 місяців тому +1

      Couldn't agree more!

    • @ryanlemons3255
      @ryanlemons3255 10 місяців тому

      some reason mine is getting interferences

  • @HCTeh-fp5ht
    @HCTeh-fp5ht 9 місяців тому

    Great video on a great radio! I have a FW450LV3 using stock FlySky receiver, and there are two variant of TX16S (4-in-1 and ELRS). Which protocal is compatible with my FW450 heli, which variant of TX16S should i choose?

  • @james22507
    @james22507 8 місяців тому

    Do you need matching receivers to go with the TX?

    • @alishanmao
      @alishanmao  8 місяців тому +2

      4-1 can take many protocols so choice is wide

  • @NormanLedoyen
    @NormanLedoyen 10 місяців тому

    I would buy this any day over a Jumper. Fantastic radio system.

  • @michaeltrager4381
    @michaeltrager4381 Місяць тому

    How is the screen resolution compared to the Futaba T18SZ Transmitter?
    \

    • @alishanmao
      @alishanmao  Місяць тому

      really good, very responsive touch screen

  • @victoragredoe
    @victoragredoe 3 місяці тому

    Greetings, a question, can a Chinese drone like the SG108 Pro be connected to this controller with the 4-in-1 multi-module module? Thank you very much for your videos, they are very useful for RC pilots.

    • @alishanmao
      @alishanmao  3 місяці тому +1

      if you know the protocol maybe you can

    • @victoragredoe
      @victoragredoe 3 місяці тому

      @@alishanmao thanks

  • @kaerlkolderman3176
    @kaerlkolderman3176 3 місяці тому

    Can you bind spectrum receivers to that radio?

  • @robflyrc
    @robflyrc 10 місяців тому +1

    I just bought the TX16S and I'm afraid of the EdgeTX. I used closed software like Flysky TH9X or i6 or i10. Now I have to configure everything from scratch, so if you could do some tutorials for beginners in EdgeTX, I would appreciate it.

    • @alishanmao
      @alishanmao  10 місяців тому +1

      for basics there are many tutorials on youtube already. i will only do new tutorials for helicopter setup. Thank you for your kind understanding.

  • @frisos3944
    @frisos3944 11 місяців тому

    I’m receiving a mark 2 very soon and would like to know how to setup self level and rescue switch for Goosky S2.

    • @alishanmao
      @alishanmao  11 місяців тому +1

      I just use one 3 position switch for flight modes. and when I flip it, i can go 3d, and flip back, to auto leveling which also works as recovery. but normally when flying 3d you do not have time to flip back to auto level LOL. it crashes in matters of milli seconds.

  • @lynsmith1096
    @lynsmith1096 8 місяців тому

    Good review Ali. I have just bought the Boxer 2 Max. Could you tell me how to set up the Boxer Edge TX to fly the Goosky Legend 1 Helicopter.

    • @alishanmao
      @alishanmao  8 місяців тому +1

      will try to find time to make a new video

    • @lynsmith1096
      @lynsmith1096 8 місяців тому

      @@alishanmao Thank you

  • @watchthemoves
    @watchthemoves 11 місяців тому

    what version you have? ELRS or 4 in 1?

    • @alishanmao
      @alishanmao  11 місяців тому

      I always get 4-1 because i have ELRS modules with me.

  • @davidporter5550
    @davidporter5550 10 місяців тому

    Your videos are very informative and easy to follow. If I buy this radio "RadioMaster TX16S MKII MAX AG01 Gimbal 4-In-1 Black" will it come loaded with Edge Tx or Open Tx? Also would like to see a video with your new RadioMaster TX16S with the Goosky S2 Radio set up with the Edge Tx.

    • @alishanmao
      @alishanmao  10 місяців тому

      Thank you for your comment and support to my work. yes it will come with EdgeTx. You can also mention in note you want EdgeTx. OpenTx is dead now. I will sure do 3D Helicopter setup video on this radio soon.
      Use my links kindly to order directly from radiomaster. Mark 2 Max Edition: bit.ly/3JqzgT8
      If you need sound effects that you see in my videos they are here, These are my custom recorded sound effects:
      Funny: bit.ly/helispfun
      Normal: bit.ly/gpshelisp
      And my EdgeTx models. but for boxer radio. will do for TX16S soon
      EdgeTx Heli Models: bit.ly/alisedgetxhelis

    • @davidporter5550
      @davidporter5550 10 місяців тому

      Got it, and thanks for the advice on getting EdgeTx instead of OpenTx.

  • @rcronnie1074
    @rcronnie1074 Місяць тому

    Hello I have the stx 16s mk 2 and I kneed to know how I can bind and set up to my blade infusion 120 what I need and to do? Thank u in advance Ronnie and I love ur videos mabuhay...

    • @alishanmao
      @alishanmao  Місяць тому

      i am not sure about blade helis what protocol rx do they use? if its in 4-1 version you can bind it, if not just get a new compatible receiver that binds easily with TX16s and install it in Blade

  • @MaxPower-zp7wy
    @MaxPower-zp7wy 5 місяців тому

    ​@alishanmao Hi Ali could you please help me. If i buy from Radiomaster official website the 4-1 version. Do these transmitters ship with European firmware LBT ? There is no mention of LBT vs FCC on the website. Will it be easy to configure these with a FrySky receiver running on D6/D16 ACCST ?? I have a few of these in my RC Proboats. Mainly because i was gifted a nice but very old FrySky Taranis X9D Plus transmitter.

    • @alishanmao
      @alishanmao  5 місяців тому +1

      check fcc or lbt before ordering. team at RMRC can guide you. use the links in our video for ordering thank you
      yes it will work with D8, D16 but for ACCST you may need new module

    • @MaxPower-zp7wy
      @MaxPower-zp7wy 5 місяців тому

      Thanks Ali. Much appreciated. I found out 4-1 multi mode module protocol does indeed support the sub protocol D16 ACCST V1 under the name FrySky X. Can you flick through on the EdgeTX and let me know that it's listed ? Before I buy the radio. Please. Thanks.

    • @alishanmao
      @alishanmao  5 місяців тому

      well i tried that before. there is no support nor anything for ACCST. you will have to buy a separate frsky module for TX16s that will add ACCST Functionality via external module option@@MaxPower-zp7wy

  • @alexherrera3918
    @alexherrera3918 6 місяців тому

    If you have to choose just one for your planes only what do you choose Boxer or TX16S?

    • @alishanmao
      @alishanmao  6 місяців тому +1

      Based on your budget, if in budget get Boxer, if you can spare more of course TX16s

    • @alexherrera3918
      @alexherrera3918 6 місяців тому

      @@alishanmao ok tks. even for small hands ?
      my current tx is jumper t12pro, i think you know that radio, and my plane a simple planes. Adding cost not and issue because i am using a gift card.
      thanks for answering my to my question.
      i hope you can comment.

  • @tomkoller749
    @tomkoller749 11 місяців тому

    Hat das radio bereits vorinstallierte modelle?

    • @alishanmao
      @alishanmao  10 місяців тому

      yes but normally i never use them. they are just for reference.

  • @almason2843
    @almason2843 10 місяців тому

    Ali, first video should be for RC Heli pilots transitioning from Spektrum radios, how to program momentary switch to arm and disarm including idle up curves!
    I just swapped out my DX12 for TX16S and used "Edge" and "Sticky" commands in logical switches to arm with the momentary switch (if I hold momentary switch for 1.5 second) then disarm with a flick of the momentary switch. However, if i am in idle up 1 or 2 heli will continue to spool. Would appreciate assistance.

    • @alishanmao
      @alishanmao  10 місяців тому +1

      Hey buddy, i would suggest the Spektrum people to learn to adapt the way its best to use the TX16s. I use SF two position switch to arm and disarm and in many crashes i have successfully disarm the motor immediately before it was too late. some times even right after heli hits the ground i have already disarmed the motor. it keeps the programming simple like no brainer. on and off type, no more logical switches no more thinking. and this simple thing just works. its easy to get used to this. I have learned in life, to change myself to adapt to new things and i find them working better for me. so I would say Spektrum people, change yourself to use SF two position switch, the new simple way :)

    • @almason2843
      @almason2843 10 місяців тому

      Thanks, you make a good point, time for this old dog to learn a new trick. Thanks again.@@alishanmao

    • @alishanmao
      @alishanmao  10 місяців тому

      @@almason2843 yeah man, This Old Dog here has changed a lot and learned to go with the new stuff and new changes. and life only gets better. Have fun buddy

  • @adilsondejesus6694
    @adilsondejesus6694 11 місяців тому

    Como sempre top aqui amigo o sinal do meu GPS está verde na hora de baixar os stiques do controle não está piscando pra levantar vôo lembrando que foi trocado o h1 original por outro pode me ajudar? obrigado

    • @alishanmao
      @alishanmao  11 місяців тому

      i replied your other comment

  • @jafarsidik180
    @jafarsidik180 11 місяців тому

    Sungguh radio yang sangat bagus,
    saya sangat maukan radio seperti itu////
    Sedikit bertanya brother,
    Radiomaster saya menggunakan EdgeTX Ver 2.8.4 FlayingDutchman
    Saya kesulitan dengan omp m1 saya yang menggunakan omp protocol, bisakah EdgeTX memberikan setup yang baik untuk omp protocol tanpa menambah satelite teceiver macam futaba atau spektrum?
    Terimakasih.....

    • @alishanmao
      @alishanmao  11 місяців тому +1

      if your OMP helicopter has built in SFHSS protocol, then no need to add receivers. you can bind your radio directly using futaba sfhss protocol

    • @jafarsidik180
      @jafarsidik180 11 місяців тому

      Terimakasih atas informasinya, tapi yang menjadi masalah saya adalah OFs series bukan ftr @@alishanmao

  • @alanjones9616
    @alanjones9616 11 місяців тому

    Ali can you do a video on the tx16s on how to download the latest firmware for beginners thank you

    • @alishanmao
      @alishanmao  11 місяців тому +1

      there already have been many videos on youtube buddy. its mostly download the firmware, put it in TF Card folder. turn on the radio, and use radio system to update firmware.

    • @alanjones9616
      @alanjones9616 11 місяців тому

      @@alishanmao ok Ali thank you for your reply

  • @davidkredow1421
    @davidkredow1421 5 місяців тому

    How to bind a FW450 V3 to a TX16S.

    • @alishanmao
      @alishanmao  5 місяців тому +1

      put in matching receiver of your choice and its easy as 123

  • @izzaniielachannel
    @izzaniielachannel 11 місяців тому

    Waalaikumsalam sir..thanks for sharing

  • @DanielMigneault
    @DanielMigneault 9 місяців тому

    I need to know the difference between Open and Edge Tx, wich radioMaster i should pick?, i'm currently with spektrum but they are getting too expensive, thanks for helping. I have planes and helis on spektrum, i need them to be compatible.

    • @alishanmao
      @alishanmao  9 місяців тому +1

      Pick this TX16S Mark 2 Max: bit.ly/3JqzgT8
      edgetx. Opentx is obsolete now, no updates anymore.

    • @DanielMigneault
      @DanielMigneault 9 місяців тому

      Thank you for the link and since i still have planes and helis on spektrum, should i pick the 4 in 1?
      @@alishanmao

  • @kernalmusterd
    @kernalmusterd 10 місяців тому

    Do a yuxiang f280 video

    • @alishanmao
      @alishanmao  10 місяців тому

      F280? i seen the video, it bogs a lot. wait for my GooSky S1 helicopter video. that tiny thing is a beast.

  • @papat7663
    @papat7663 11 місяців тому

    If I buy this radio do not need to replace my receivers in my RC models?

    • @alishanmao
      @alishanmao  11 місяців тому

      4-1 can bind to most of the receviers. what receivers are you running in other models?

  • @papat7663
    @papat7663 11 місяців тому

    But can you link it with F06 ec135 helicopter

    • @alishanmao
      @alishanmao  11 місяців тому

      no, unless you buy a new board being sold on aliexpress (I heard) that has a port to add external rx. then you can

  • @Adrian-sd8ck
    @Adrian-sd8ck 11 місяців тому

    Very nice video 👍👍👍

    • @alishanmao
      @alishanmao  11 місяців тому +1

      Thanks for visiting