How to Re-grease & Replace Front and Rear Wheel Bearings on your 4x4 || 70, 80 & 105 Series ||
Вставка
- Опубліковано 27 лип 2018
- Hey Guys and Gals!
In this video I show you how to re-grease your front and rear wheel bearings on your Toyota Landcruiser 80 series or 105 series. The count down is on until we leave for Cape York and our preparations are well under way and nearing the end. There are only a few more things to tick of the list and we will be on our way to the Cape.
We are leaving from the Sunshine Coast on the 4th of August and have 2 and 1/2 weeks to complete our trip. We plan to complete the Old Coach Road and Old Telegraph Track. The 80 series has been brought back to life to carry out the 6000km journey up and back to the Cape, hopefully without any issues.
In this video i start by showing you how to re-grease the rear wheel bearings and carry out the tightening procedure correctly. Then i move on to the front and thoroughly show you how to carry out the replacement of the front bearings and how to re-grease, pre-load and tension them correctly.
Time Stamps :
Front Wheel Bearings : 0:20:39
Re-greasing Front Wheel Bearings : 0:30:26
Rear Wheel Bearings : 0:01:03
Re-greasing Rear Wheel Bearings : 0:07:54
Thanks for watching, If you enjoyed this video and would like to support my channel by liking and subscribing that would be awesome!
Cheers, Nick
Really appreciate your well explaining on rear wheel bearing re-greasing🙏
Two major points: All the old grease must be washed out of the hub and bearing before repacking. Two: Always lubricate the oil seal in the rubber surface before the hub is installed.
Many
3 drivers trick is great. You're a legend, mate!
Thanks for the video and the comments everyone. I used this to redo my front bearings today.
Very informative video mate, I am now confident on doing my own which will save me quite a few bucks. Well done., thanks heaps.
Very well presented. You have given me the confidence to do this myself now. thankyou
Great vid Nick. This is exactly how you'd do it if you broke down away from a workshop. Brilliant work.
Great video. I use it as a guide prior to servicing my 80 bearings. Thanks!
Thanks for the very well explained video, you saved me a lot of money
Very well dressed video I was looking to do on mine I felt here so nice job thanks for sharing
Thanks from Plano, Texas USA! Very helpful video.
Excellent vid - one tip, when popping the cone put a big bronze punch on the loosened nut and hit the punch with the hammer. It will pop the cone a lot easier and is easier on the nut and stud.
About to do my 105 - great tips
Excellent video mate. Thanks for posting. Has helped me to do my own now.
Like the vid ,doing my troopy at the moment and though capable ,still learnt somethink and picked up some tips, cheers ,happy 4x4ing
Used your vid today. Was great! Much appreciated!
Great video and very well explained, thanks mate 👍
Great video my friend. It’s been a while since I’ve done my bearings and this was a great way to refresh
Awesome mate!