Link Channel Membership Subscription: ua-cam.com/users/XIMCentraljoin Buy XIM Matrix here (paid links): Cheapest = Flashback: www.flashbackltd.com/products/xim-matrix-multi-input-adapter?_pos=1&_sid=891068637&_ss=r&aff=66 Amazon US: amzn.to/3DTZkFS Amazon Germany: amzn.to/3KFbsyd Amazon UK: - in a few weeks - Amazon France: amzn.to/45Pr5es Amazon Italy: amzn.to/4609Ebg All XIM Distributors & their shops: xim.tech/shop/ Link S1mple Settings: www.prosettings.com/s1mple-csgo-settings/ Link CS Pro Settings List: www.prosettings.com/csgo-pro-settings/ Link Average Sensitivity In A Few Games: aiming.pro/what-sensitivity-do-pro-esports-gamers-use
Hello, good afternoon, a question, I play a more native game with PC but when I set the red force parameter to the maximum, the anticol does not work for me, it only pulls a little but it does pull, it reaches the maximum of your red attachment with 180 degrees downwards and the weapon is not controlled at all if she goes up what can I do
@@ximmatrixEspañol Thats the issue, if you use native MnK output to PC you have to do the calibration first. Otherwise smart actions and everything else wont work well. Please do that and try again! :)
That sounds a bit too high if you ask me but if you can handle that then definitely stick with it! 🥳 Id say do the guide though to see how large the gap between your current sensitivity and your most optimal one is. Just for a comparison.
@@XIMCentral ua-cam.com/video/goip4HL_CW0/v-deo.htmlsi=yXcpgUMN2uSIX4JI Here‘s an example, it feels really accurate and slow though. I‘m using 8k DPI and 1000hz am I maybe missing something? My Mouse is Logitech G Pro Superlight and I also have the DPI on Onboard Memory + 0.13 Radial DZ in D2, like it was advised by the community.
@@neyntv Id say take a ruler and measure what your actual cm/360° on the mousepad is. Because 5 would mean you do a 360° turn in the game when moving the mouse by 5cm on the mousepad. Thats very very unlikely.
@XIMCentral The most painful thing is , when the enemy dropshot or crouch while shooting my aim , lock for a second 😢 I don't know why , but when they are standing and firing I don't have this problem but if they suddenly drop shot or crouch my aim lock for a second any solution? Im using xim matrix
I assume thats part of how the aim assist works with the hitbox being overlapped from your perspective. I could see that being an issue for the aim assist. Thats nothing your XIM is responsible for or can change it. Maybe try a different ingame aim assist option to see if that helps. Or increase your XIM polling rate to lover the overall aim assist.
@XIMCentral but I didn't have this problem before the beta update , I still have my xim apex, and it doesn't have this problem , I even factory reset my xim matrix same issue
Awesome to hear that man, it should not take a lot of time to get used to the sensitivity then. Did you do the guide right at the start of your gaming session? If you did it like an hour into your gaming session then chances are you where already accustomed to your normal sensitivity which makes the outcome of this guide less reliable.
You could say similar things about other games where HIP is meaningless and only ADS matters (Siege). In the end you only need to adapt the game's characteristics to this guide to find your most optimal mouse sensitivity.
Hello xim central! Sorry I didn't quite get the first part. Is this better done on a target with aim assist or on a target without aim assist? Thank you!
That depends tbh. Some prefer without AA so off-target whereas other users prefer it with. Since most games have AA imo its best to do it with AA active, so on-target. But you cannot really go wrong doing it off-target too since that will be your true most optimal sensitivity. With AA being active you can just use a slightly higher sensitivity which may be better overall.
As long as you correctly specify your mouse DPI within your XIM config then the sensitivity wont change. So XIM 25 @ 800 DPI would be as fast as XIM 25 @ 8.000 DPI. It will only be a different sensitivity if your mouse doesnt run on the DPI value you have specified in your XIM config.
Thanks for the vid. Quick question, will this new update brake or be incompatible w/ those using the “Matutaiki01” setup? For example if I chose a sens. lv. of 30 w/out using the “Matutaiki01” Config. will the 30 sens. value behave the same way as stated in your video? Please let me know when you can.
It will be different then. You can however take a ruler and measure your cm/360° distance on the mousepad under your current sensitivity and then use that as your value for the new sensitivity firmware.
@@XIMCentral I think understand, so I would have to use the classical sensitivity method originally used on PC w/ averaging the 360 value between [(2)360] & the [(.5)360] then find the best fit between the 3 values, yes?
@@pan-horus1323 Yes thats possible, but i think you just wanted to transfer your old sensitivity to the new sensitivity algorithm, no? Then you would just do as described above by me.
@@XIMCentral Thank for the insight. Recently, I transferred all of my settings the M01 config & I was hoping that I didn't have to start all over w/ a new sensitivity system for all of my games. Ok then, thanks alot.
Good question! If two games have fundamentally different gameplay then yes id say do it. As in one game has mostly up-close combat whereas a different game as mostly long distance ones. But if they are roughly the same, then you can use the same sensitivity for several games.
Hi, I have a question about xim Matrix. Is it normal that you can't move the sticks on the controller that you have connected? It doesn't matter if it's a PS4 or PS5 controller, everything works with the controller except for the sticks. My account has been banned twice now on Valorant, I suspect it doesn't recognize the stick movement. Or is it because of the Wooting he60 keyboard with the optical switches? Thanks for the help
Hey, this is due to the config you have created. If its a MnK config then your XIM will only register MnK. Update to the new XIM Firmware so everything works at the same time. Or create a "Mouse and Gamepad" config. Valorant requires you to use SAB, and its system is report based. So if too many people report you for cheating then your gameplay is being inspected by Riot. So you have two options. Either reduce the risk of being reported, or use enough SAB to pass the inspection. A wooting is only beneficial when in analog mode.
@@XIMCentral Thank you for your quick reply. What would be a good setting for the SAB? How many percent do I need to go to? Is 40 or 50 enough? I have set the behavior simulation setting to 50%. I have firmware and manager version 7.00.20240429 and 7.00.20240722 on ios
@@julianxxxx4070 There is no answer to that since its different for every person. You will have to find your own best SAB value that works for you. Your manager is much newer than your XIM Firmware, id say update your XIM Firmware too via PC or Mac! :)
I wouldnt recommend to do that since you then will have major issues getting around the mousetrap. But if you still want to do it, any strong acceleration curve will do the trick!
I need ur help for warzone, i'm running now on default a sens of 3.6 in game and 800 dpi on my mouse, what would be the setting for the xim app to have the same feeling?
Hi so I just got a xim matrix and was wondering if I could get 1 on 1 help because I watched how to set it up for r6 but when I look or move my mouse it is really slow
You just dont have to use Move SAB, but the other ones may still be required. The only analog keyboard that is XIM compatible is the Wooting. All other ones require a PC to offer analog movement (except for one keyboard but that one is new and unsure how well it performs).
For XIM Apex you can use my previous 2 sensitivity guides. One of them was made for XIM Apex, the other one for Matrix but also works for XIM Apex. The one shown in this video doesnt work with XIM Apex due to using a different sensitivity system.
@@XIMCentral in a previous Apex sens video you commented to turn off aim assist when finding the right sens, in this one you say to keep it on. Do you suggest to keep it on for Apex?
@@c0wmartyr Aim assist has changed a lot over the last 2 years so nowadays yes i would recommend to keep it on! Back then it was better to turn it off.
Das ist leider fast unmöglich zu erreichen aber ja, das wäre am sinnvollsten. Da der ADS Modus ins Spiel fast immer "reinzoomt" ist es unmöglich einfach die HIP Geschwindigkeit als ADS Wert zu benutzen. Durch den Zoom ist die effektive Drehgeschwindigkeit dann eine ganz andere. Du hast entweder die Wahl das jetzt auszurechnen (wie viel % zoomt der ADS Modus ins Spiel um basierend darauf die ADS Geschwindigkeit auszurechnen), oder du machst das Tutorial einfach erneut wodurch du diesen Wert auch erhalten solltest. Wie weit ein ADS Aufsatz reimzoomt wirst du wahrscheinlich gar nicht wirklich ermitteln können außer du analysierst Screenshots über den PC oder so.
@@XIMCentral Danke Dir. Könnte man nicht einfach im Zoom die Zentimeter messen, die man benötigt, um eine 360 Grad Drehung zu machen und dann die gleichen Zentimeter anstreben oder habe ich einen Denkfehler?
@@elnitzo5073 Dann wärst du aber wesentlich schneller unterwegs. Was du meinst ist die selbe cm per Pixel Geschwindigkeit. Und die kannst du nur errechnen oder erneut erhalten indem du den Guide im ADS Modus machst.
Sub man, i have a question, does the new azeron keyboard (cyborg 2 compact) work with matrix and apex? Im thinking of getting one to avoid mouse trap in ow2. Thanx for the great videos and answering us, u r the best man 😊
@@hsnflmIf you dig into the forum a bit there is one old time user that has used one for a long time but recently switched because they feel like they press the buttons too strong 😅. They have a ton of knowledge with using the azeron keypads!
@@devynvega7067 Hey, please watch my Matrix Rainbow Six Siege Config tutorial for all details. It sounds like some setup errors have caused issues for you. By following the video you will be able to ensure that no accidental error will affect your XIM experience.
Use analog movement and enough SAB. Beyond that they dont really scan for MnK. Its a report system. If you get reported by too many people your account gets automatically banned. It doesnt matter if you are on controller or something else.
But be careful, a lot of them have already been banned. I've heard that it's best to use the controller for movement and the mouse for aiming, because they probably can recognize the keyboard control.
Hello odin♥️ The Gamepad input xim matrix has some bugs, sometimes sensivity is fast and sometimes its slow, i try it with different controllers and games and all same, for example when i increase my sens sometimes its fast and sometimes slow, and the other problem is curve, when i change it, my aim will be so unnormal and wierd
With each round you lower the amount you vary your sensitivity. This is because with each round you get closer to your most optimal sensitivity, so you must no longer make such large sensitivity changes anymore. If you start with a sensitivity of 35, and your difference is 20, then you add and substract 20 from your starting sensitivity. So 35-20 and 35+20 are the two additional sensitivities you must try besides your starting sensitivity of 35.
What you experience is the maximum turnspeed of the game. Its a limitation of the game and therefore cannot be changed. Move your mouse slower and at a constant speed to turn faster, or reduce your sensitivity. Your XIM will show a red blinking if you move the mouse faster than you can turn in the game.
See the XIM SAB Guide from the XIM Forum. Or my SAB Guide video which is a bit more detailed. The latter is no longer available though because Ubisoft striked it, but for some reason its still viewable for Channel Members. Probably not for too long anymore though.
I cannot provide more assistance anymore as my SAB Guide video got striked by Ubisoft. If you know how to dial it in you can use SAB values of 0-20. See the XIM Forum for more information on how to dial in SAB. If you need 60 then that sounds like something went wrong.
Because they dont really scan for MnK. Its a report system. If you get reported by too many people your account gets automatically banned. It doesnt matter if you are on controller or something else.
is there a valorant config in the making cause I'm getting banned again and again on ps5 using xdefiant config and sab at 70 or 80 or 65 also I'm using the aim assist booster uploaded before mataukai(aim assist booster video, sorry for spelling)
@@XIMCentral i used 100 sab also on apex legends as Google says that game is closest to valornat still detectable. is there a config in the making for valornat ps5. if not what's the solution(I have a wasd keyboard, not an analogue keyboard)
@@tanishqshahdadpuri296 The solution is to not use a digital keyboard. You can move into 8 different directions whereas an analog stick can walk into a million ones. Thats just wayyyy too detectable. I get banned in Valorant after 2-3 games in high elo ranked when using digital WASD. Whereas if i use analog WASD im fine together with my Aim SAB.
When are they going to release something from XIM to make it work in sports games like MLB, baseball, NBA, among others? But if it focuses on that 2, believe me, you will have many more sales because the XIM Matrix does not work in sports games.
Hey, those games dont require any special config. You would just create a "Generic Alpha Config" that you can find at the bottom of the new config list. Then do your bindings and adjust everything. You only really need a config for ego shooters as aiming must be as precise as it can get there.
Hello, I'm on PS5 using 25,600 dpi on a logitech mouse an the cm per 360 is so off its not even funny. I'm using 5 hip 5 ads an in most games it takes a few arm swings to do a full 360 it doesn't make sense... is it bugged on ps5?
Check if your mouse really runs on that DPI level by using the XIM DPI Checker. It sounds a lot like your mouse runs 800 DPI but you have set your XIM config DPI value to 25600 DPI. Your sensitivity would then be 32 times slower than it should be.
@@XIMCentral my mouse says it's 25,600 on my pc an it's super fast then I type 25600 on my xim an the sens doesn't feel any different which has been annoying me recently cause I can't copy anyone's config cause all of them feel extremely slow. Do you mean I should use 800 dpi on my mouse an 25600 on my xim? I'm super confused sorry. I have a logitech hero g05 or something like that btw
@@Maddux6969 Thats an indication that your mouse doesnt run on that profile. With Logitech mice you need to use the Logitech Onboard Memory Manager software to save your DPI changes onto the mouse memory itself. Only that way the DPI value will carry over to the XIM.
Hey, use more DPI on your mouse + XIM DPI value, reduce your overall sensitivity, add smoothing and lower your polling rate. All of those will help with that. Especially smoothing.
@@b52flikedyou36 8000-12000 is ideal and use the same value for both. Make sure to save your mouse DPI changes onto the mouse memory or else your DPI changes wont carry over to the XIM!
Lower value = faster and higher value = slower. If that doesnt work for you then your mouse doesnt run on the DPI value you have specified in your XIM config.
@@Vertbands Have you connected an original Xbox controller to port 3 of your XIM Matrix? And did you setup your config to be "Xbox/PS4" in the connection settings?
Just use analog movement and SAB. If you know what to do you can get away with SAB values as low as 0-20. Thats barely noticeable. I think im using 20-10-0 or something like that, maybe even less.
I have a question about the new sensitivity cm/360. I used to play on XIM apex Fortnite with a sensitivity of 14 on sync common. On the matrix what would be the cm/360 to 14 hip sensitivity on apex. I play on 3600 dpi
Hey, there is no conversion formula between the two. You would need to take a ruler and measure your cm/360° with the XIM Apex to then transfer that value to XIM Matrix.
Link Channel Membership Subscription: ua-cam.com/users/XIMCentraljoin
Buy XIM Matrix here (paid links):
Cheapest = Flashback: www.flashbackltd.com/products/xim-matrix-multi-input-adapter?_pos=1&_sid=891068637&_ss=r&aff=66
Amazon US: amzn.to/3DTZkFS
Amazon Germany: amzn.to/3KFbsyd
Amazon UK: - in a few weeks -
Amazon France: amzn.to/45Pr5es
Amazon Italy: amzn.to/4609Ebg
All XIM Distributors & their shops: xim.tech/shop/
Link S1mple Settings: www.prosettings.com/s1mple-csgo-settings/
Link CS Pro Settings List: www.prosettings.com/csgo-pro-settings/
Link Average Sensitivity In A Few Games: aiming.pro/what-sensitivity-do-pro-esports-gamers-use
Hello, good afternoon, a question, I play a more native game with PC but when I set the red force parameter to the maximum, the anticol does not work for me, it only pulls a little but it does pull, it reaches the maximum of your red attachment with 180 degrees downwards and the weapon is not controlled at all if she goes up what can I do
@@ximmatrixEspañol Did you do the cursor calibration in the first menu screen?
@@XIMCentral no I didn't calibrate it I just put it I started the native pubg
@@ximmatrixEspañol Thats the issue, if you use native MnK output to PC you have to do the calibration first. Otherwise smart actions and everything else wont work well. Please do that and try again! :)
@ximcentral do you have sensitivity settings for console on controller?
I‘m using 5 HIP and 12 ADS for Destiny I’m a wrist aimer and I definitely need the fast turn speed in D2 ability spam.
That sounds a bit too high if you ask me but if you can handle that then definitely stick with it! 🥳 Id say do the guide though to see how large the gap between your current sensitivity and your most optimal one is. Just for a comparison.
@@XIMCentral ua-cam.com/video/goip4HL_CW0/v-deo.htmlsi=yXcpgUMN2uSIX4JI
Here‘s an example, it feels really accurate and slow though. I‘m using 8k DPI and 1000hz am I maybe missing something?
My Mouse is Logitech G Pro Superlight and I also have the DPI on Onboard Memory + 0.13 Radial DZ in D2, like it was advised by the community.
@@neyntv Id say take a ruler and measure what your actual cm/360° on the mousepad is. Because 5 would mean you do a 360° turn in the game when moving the mouse by 5cm on the mousepad. Thats very very unlikely.
@XIMCentral
The most painful thing is , when the enemy dropshot or crouch while shooting my aim , lock for a second 😢 I don't know why , but when they are standing and firing I don't have this problem but if they suddenly drop shot or crouch my aim lock for a second any solution? Im using xim matrix
I assume thats part of how the aim assist works with the hitbox being overlapped from your perspective. I could see that being an issue for the aim assist. Thats nothing your XIM is responsible for or can change it. Maybe try a different ingame aim assist option to see if that helps. Or increase your XIM polling rate to lover the overall aim assist.
@XIMCentral but I didn't have this problem before the beta update , I still have my xim apex, and it doesn't have this problem , I even factory reset my xim matrix same issue
@@AmmarMo123 Can you try a brand new config with no changes done to it and see if it also occurs with that one?
just followed this guide and my sens went from 15 hip to 18.8 and 96 aim to 101.8 so i was pretty close to my perfect sense
Awesome to hear that man, it should not take a lot of time to get used to the sensitivity then. Did you do the guide right at the start of your gaming session? If you did it like an hour into your gaming session then chances are you where already accustomed to your normal sensitivity which makes the outcome of this guide less reliable.
@@XIMCentral yeah i got on and did the guide and started playing and noticed my aim was wayyyyy better
@@duhnille 💪💪💪
What are your curves?
And dpi?
CS is a different beast altogether as you don't usually ADS, aside from just a handful of weapons.
You could say similar things about other games where HIP is meaningless and only ADS matters (Siege). In the end you only need to adapt the game's characteristics to this guide to find your most optimal mouse sensitivity.
Hello xim central! Sorry I didn't quite get the first part. Is this better done on a target with aim assist or on a target without aim assist? Thank you!
That depends tbh. Some prefer without AA so off-target whereas other users prefer it with. Since most games have AA imo its best to do it with AA active, so on-target. But you cannot really go wrong doing it off-target too since that will be your true most optimal sensitivity. With AA being active you can just use a slightly higher sensitivity which may be better overall.
does the sens changes with dpi? a sens of 25 with 800 dpi is the same as a sens of 25 with 4000 dpi?
As long as you correctly specify your mouse DPI within your XIM config then the sensitivity wont change. So XIM 25 @ 800 DPI would be as fast as XIM 25 @ 8.000 DPI. It will only be a different sensitivity if your mouse doesnt run on the DPI value you have specified in your XIM config.
Thanks for the vid. Quick question, will this new update brake or be incompatible w/ those using the “Matutaiki01” setup? For example if I chose a sens. lv. of 30 w/out using the “Matutaiki01” Config. will the 30 sens. value behave the same way as stated in your video? Please let me know when you can.
It will be different then. You can however take a ruler and measure your cm/360° distance on the mousepad under your current sensitivity and then use that as your value for the new sensitivity firmware.
@@XIMCentral I think understand, so I would have to use the classical sensitivity method originally used on PC w/ averaging the 360 value between [(2)360] & the [(.5)360] then find the best fit between the 3 values, yes?
@@pan-horus1323 Yes thats possible, but i think you just wanted to transfer your old sensitivity to the new sensitivity algorithm, no? Then you would just do as described above by me.
@@XIMCentral Thank for the insight. Recently, I transferred all of my settings the M01 config & I was hoping that I didn't have to start all over w/ a new sensitivity system for all of my games. Ok then, thanks alot.
will there be a valorant config soon?
Yes!
U should make video about smoothing
Hey, i have already done that! You can find the video on this channel! :)
so do you think this should be done for every game? also would it better to have lower sens for ow? since you did showed how sens is lower for ow
Good question! If two games have fundamentally different gameplay then yes id say do it. As in one game has mostly up-close combat whereas a different game as mostly long distance ones. But if they are roughly the same, then you can use the same sensitivity for several games.
@@XIMCentral thanks! what about dpi? do you think dpi should be the same for every game as well or be different?
@@97Chazzy Ideally use one value for all games so you must not change your mouse DPI value every time! :)
@@XIMCentral ah okay, for most games ive been using the same dpi at 12k but with apex and marvel rivals, its different
Hi, I have a question about xim Matrix. Is it normal that you can't move the sticks on the controller that you have connected? It doesn't matter if it's a PS4 or PS5 controller, everything works with the controller except for the sticks. My account has been banned twice now on Valorant, I suspect it doesn't recognize the stick movement. Or is it because of the Wooting he60 keyboard with the optical switches? Thanks for the help
Hey, this is due to the config you have created. If its a MnK config then your XIM will only register MnK. Update to the new XIM Firmware so everything works at the same time. Or create a "Mouse and Gamepad" config. Valorant requires you to use SAB, and its system is report based. So if too many people report you for cheating then your gameplay is being inspected by Riot. So you have two options. Either reduce the risk of being reported, or use enough SAB to pass the inspection. A wooting is only beneficial when in analog mode.
@@XIMCentral Thank you for your quick reply. What would be a good setting for the SAB? How many percent do I need to go to? Is 40 or 50 enough? I have set the behavior simulation setting to 50%. I have firmware and manager version 7.00.20240429 and 7.00.20240722 on ios
@@julianxxxx4070 There is no answer to that since its different for every person. You will have to find your own best SAB value that works for you. Your manager is much newer than your XIM Firmware, id say update your XIM Firmware too via PC or Mac! :)
what curve should you use for r6 to feel like pc??
I wouldnt recommend to do that since you then will have major issues getting around the mousetrap. But if you still want to do it, any strong acceleration curve will do the trick!
Can you make a video on how to setup a quick peek for r6 xim matirx?
Already did and its currently in early access for Channel Members. I may release it in 1-2 months to the public.
What is the optimal dpi btw ?
Preferably use 8000-12000 DPI!
@@XIMCentralin app or on mouse?
@@xiya. Both. Always use the same value for both too! :)
when will the crazy input delay on the xim app get fixed? If i’m on the app for more than 10 minutes then i get like a 2 second delay for everything
Thats a Bluetooth issue. In your phone settings activate the setting that suspends inactive Bluetooth connections.
Is DPI still recommended at 10800 at both xim matrix and mouse?
Between 8000-12000 is ideal! :)
In R6 we get mousetrap if the sensitivity less than 40
The higher your sensitivity the more SAB you will need since your aiming becomes more stuttery and less controller like.
not really I have my sens on 12 hip and 5 ads with no sab and in game sens is 90 90
ads all above 70
@@tanishqshahdadpuri296 Then you are one of the few profiles that are bugged and the trap doesnt scan you.
@@XIMCentral what do you mean bugged ???
@@tanishqshahdadpuri296 Bugged as in gliteched. There are plenty of people who the mousetrap cannot scan for some reason.
I need ur help for warzone, i'm running now on default a sens of 3.6 in game and 800 dpi on my mouse, what would be the setting for the xim app to have the same feeling?
Hey, what do you mean with for the XIM app? You mean you use that as your PC sensitivity and you want to have the same one when using a XIM?
Hello there can you post an updated settings video for bo4 xim apex?
The game has received no changes so an update isnt necessary as it would be the very same settings again.
If I put my hip to 11cm and I have 100v 100h will I get mouse trap for it being to fast
You cannot avoid the mousetrap simply by using specific ingame settings. You must use SAB and analog movement.
@ so if I use 100% sab and I have my hip to 1cm and my aim to 3cm will I get mouse trap
@@XIMCentral I’m using 70 70 100 is that still to high
Hi so I just got a xim matrix and was wondering if I could get 1 on 1 help because I watched how to set it up for r6 but when I look or move my mouse it is really slow
For that please head into the XIM Forum (Support).
If i buy keyboard with analog stick I don’t have to use SAB ? and all keyboard with analog stick works with xim?
You just dont have to use Move SAB, but the other ones may still be required. The only analog keyboard that is XIM compatible is the Wooting. All other ones require a PC to offer analog movement (except for one keyboard but that one is new and unsure how well it performs).
Does all this info apply to the Apex too?
For XIM Apex you can use my previous 2 sensitivity guides. One of them was made for XIM Apex, the other one for Matrix but also works for XIM Apex.
The one shown in this video doesnt work with XIM Apex due to using a different sensitivity system.
@@XIMCentral in a previous Apex sens video you commented to turn off aim assist when finding the right sens, in this one you say to keep it on. Do you suggest to keep it on for Apex?
@@c0wmartyr Aim assist has changed a lot over the last 2 years so nowadays yes i would recommend to keep it on! Back then it was better to turn it off.
Moin Odin, danke für das Tutorial.
Ist es nicht allein schon wegen Muscle Memory sinnvoll, HIP und ADS gleich zu wählen?
Das ist leider fast unmöglich zu erreichen aber ja, das wäre am sinnvollsten. Da der ADS Modus ins Spiel fast immer "reinzoomt" ist es unmöglich einfach die HIP Geschwindigkeit als ADS Wert zu benutzen. Durch den Zoom ist die effektive Drehgeschwindigkeit dann eine ganz andere. Du hast entweder die Wahl das jetzt auszurechnen (wie viel % zoomt der ADS Modus ins Spiel um basierend darauf die ADS Geschwindigkeit auszurechnen), oder du machst das Tutorial einfach erneut wodurch du diesen Wert auch erhalten solltest. Wie weit ein ADS Aufsatz reimzoomt wirst du wahrscheinlich gar nicht wirklich ermitteln können außer du analysierst Screenshots über den PC oder so.
@@XIMCentral Danke Dir. Könnte man nicht einfach im Zoom die Zentimeter messen, die man benötigt, um eine 360 Grad Drehung zu machen und dann die gleichen Zentimeter anstreben oder habe ich einen Denkfehler?
@@elnitzo5073 Dann wärst du aber wesentlich schneller unterwegs. Was du meinst ist die selbe cm per Pixel Geschwindigkeit. Und die kannst du nur errechnen oder erneut erhalten indem du den Guide im ADS Modus machst.
@@XIMCentral Ah, und ich hatte mich schon gefragt, warum sich ADS so schlecht angefühlt hat. Danke, Odin
Sub man, i have a question, does the new azeron keyboard (cyborg 2 compact) work with matrix and apex? Im thinking of getting one to avoid mouse trap in ow2.
Thanx for the great videos and answering us, u r the best man 😊
Hey, i think it does as all other Azerons work with the XIM too. If it doesnt the Azeron team will surely fix it within a short time.
@XIMCentral so do u think getting the old azeron keyboard is a better idea !?
And thanx 4 answering me man ☺️
@@hsnflm Im the wrong person to ask for that since i dont use their products 😅
@@XIMCentral np man, thanx a lot
@@hsnflmIf you dig into the forum a bit there is one old time user that has used one for a long time but recently switched because they feel like they press the buttons too strong 😅. They have a ton of knowledge with using the azeron keypads!
How do I convert sensitivity from a 35000 dpi config to a lower sens?
Just change your XIM DPI config value to the new DPI, then everything is done for you in the background! :)
Will this work for R6?
Yes!
How do you determine dpi i have a 6400 razer
Use the XIM DPI Checker in the Manager if you want to measure your mouse DPI! :)
I see people talking about ban for using matrix in valorant, what happening ?
They probably dont use SAB or use a digital keyboard, so you get detected and temporarily banned.
I just got a xim and when I setup it up for siege it doesn’t work. Everything does besides the sensitivity any fix?
Hey, what do you mean with the sensitivity doesnt work?
@@XIMCentral like the sens is really slow and not fast how I put it
@@devynvega7067 Hey, its a cm/360° one so higher values = slower and lower values = faster. Is that maybe where the confusion comes from?
@@XIMCentral I’m not sure what that is where do I find that
@@devynvega7067 Hey, please watch my Matrix Rainbow Six Siege Config tutorial for all details. It sounds like some setup errors have caused issues for you. By following the video you will be able to ensure that no accidental error will affect your XIM experience.
How can i not get banned in volarant evey smurf i have done it got banned pls help
Use analog movement and enough SAB. Beyond that they dont really scan for MnK. Its a report system. If you get reported by too many people your account gets automatically banned. It doesnt matter if you are on controller or something else.
@@XIMCentral what does analog movement mean, you mean use the controller thumbs stick with the left hand and mouse with the right? No keyboard?
@@xdregon25x55 Exactly. Or use an analog keyboard like the Wooting if you want to use an analog stick for movement.
why does my anti recoil not work on other account for r6 i have the same sens and attachments
Siege Sensitivity Bug. Reset your ingame settings on both accounts to solve it! ;)
So does dpi even matter?
With XIM Matrix DPI has close to no influence anymore assuming you set your XIM DPI value to the same one your mouse runs on.
How do you get to the 30 as your starting point
30 is the average of what PC players use, hence i picked it as the starting sensitivity. You can start with any sensitivity that you want to.
Can anyone suggest which keyboards are compatible with Matrix? Budget: 60 dollars maximum. I play Siege in a Series S
Hey, see the XIM Forum for the incompatibility list. Most keyboards work, which is why only the keyboards are tracked that dont work.
what game config should i use for volorant?
People like TF2 or XDefiant a lot. Game just came out so a XIM game profile should be out very soon too!
But be careful, a lot of them have already been banned. I've heard that it's best to use the controller for movement and the mouse for aiming, because they probably can recognize the keyboard control.
@@Wow4ik1 Detecting keyboard movement is exceptionally easy. You shouldnt do that in any game that claims to scan for MnK inputs.
Hello odin♥️
The Gamepad input xim matrix has some bugs, sometimes sensivity is fast and sometimes its slow, i try it with different controllers and games and all same, for example when i increase my sens sometimes its fast and sometimes slow, and the other problem is curve, when i change it, my aim will be so unnormal and wierd
Hey, can you create a brand new config with no changes done to it other than stick sensitivity adjustments? Does the issue still occur then?
@@XIMCentral default settings have no problem, but when i increase sensivity or change curve the aiming will become unnormal
@@ARMINJB. Removem the curve, does the problem vanish then?
@@XIMCentral no, stiil it has bug
@@ARMINJB. Do you have that in all games or only in one game?
I’m having a bit of trouble understanding the part where you’re going over the differences of 10 and 5 and stuff like that
With each round you lower the amount you vary your sensitivity. This is because with each round you get closer to your most optimal sensitivity, so you must no longer make such large sensitivity changes anymore. If you start with a sensitivity of 35, and your difference is 20, then you add and substract 20 from your starting sensitivity. So 35-20 and 35+20 are the two additional sensitivities you must try besides your starting sensitivity of 35.
@@XIMCentral ohhh I get it now I’m sorry 😭. Thank you so much
When i move my mouse fast my camera goes slow how do i fix this?
What you experience is the maximum turnspeed of the game. Its a limitation of the game and therefore cannot be changed. Move your mouse slower and at a constant speed to turn faster, or reduce your sensitivity. Your XIM will show a red blinking if you move the mouse faster than you can turn in the game.
Hi I'm using xim apex and play R6 I get mouse trap how I can be able to play without get trapped??
Answer please
See the XIM SAB Guide from the XIM Forum. Or my SAB Guide video which is a bit more detailed. The latter is no longer available though because Ubisoft striked it, but for some reason its still viewable for Channel Members. Probably not for too long anymore though.
@@XIMCentral hi again I just remove and download my xim apex app but on the download friz not downloading anything what I do???
@@DYAREKURD1 Hey, what do you mean by that?
@@XIMCentral how I can contact private?
@@DYAREKURD1 Just post under a video, that is the fastest way id say! :)
Is there a problem if I run a mouse with a polling rate of 8000?
Your console just wont accept more than 1000Hz but no, with XIM Matrix that should work.
Bought a matrix for siege and it is not playable in high ranks with SAB! Horrible delay on it get mouse trapped under 60 SAB WITH LOW SENS!!
I cannot provide more assistance anymore as my SAB Guide video got striked by Ubisoft. If you know how to dial it in you can use SAB values of 0-20. See the XIM Forum for more information on how to dial in SAB. If you need 60 then that sounds like something went wrong.
I got champ with sab its easy u just bad 😂
@@Lucaaqq15 Im top 1000 on controller lil bro and hit top 60 the other season. You’re getting shit on by me with your xim.
@@jayvvsgoat7998 whats ur gt
@@jayvvsgoat7998 what ur gamertag
I got banned in Valorent how did you not get banned? Even though I use high SAB values
Because they dont really scan for MnK. Its a report system. If you get reported by too many people your account gets automatically banned. It doesnt matter if you are on controller or something else.
is there a valorant config in the making cause I'm getting banned again and again on ps5 using xdefiant config and sab at 70 or 80 or 65
also I'm using the aim assist booster uploaded before mataukai(aim assist booster video, sorry for spelling)
That means you dont use enough SAB. Also dont use a digital keyboard, thats too easy to detect. A Valorant game profile is being trained atm.
@@XIMCentral i used 100 sab also on apex legends as Google says that game is closest to valornat still detectable. is there a config in the making for valornat ps5. if not what's the solution(I have a wasd keyboard, not an analogue keyboard)
@@tanishqshahdadpuri296 The solution is to not use a digital keyboard. You can move into 8 different directions whereas an analog stick can walk into a million ones. Thats just wayyyy too detectable. I get banned in Valorant after 2-3 games in high elo ranked when using digital WASD. Whereas if i use analog WASD im fine together with my Aim SAB.
@@XIMCentral what do you mean analouge keyboard u mean analouge switches
@@tanishqshahdadpuri296 I mean a Wooting keyboard or using a normal analog stick.
When are they going to release something from XIM to make it work in sports games like MLB, baseball, NBA, among others? But if it focuses on that 2, believe me, you will have many more sales because the XIM Matrix does not work in sports games.
Hey, those games dont require any special config. You would just create a "Generic Alpha Config" that you can find at the bottom of the new config list. Then do your bindings and adjust everything. You only really need a config for ego shooters as aiming must be as precise as it can get there.
Is there a discord community link for xim
There is no official XIM Discord but a bunch of inofficial community driven ones.
Hello, I'm on PS5 using 25,600 dpi on a logitech mouse an the cm per 360 is so off its not even funny. I'm using 5 hip 5 ads an in most games it takes a few arm swings to do a full 360 it doesn't make sense... is it bugged on ps5?
There’s a turning speed cap on console so you can’t turn properly on xim just find a sens you can aim with and high dpi on ps5 console ain’t too great
Check if your mouse really runs on that DPI level by using the XIM DPI Checker. It sounds a lot like your mouse runs 800 DPI but you have set your XIM config DPI value to 25600 DPI. Your sensitivity would then be 32 times slower than it should be.
@@XIMCentral my mouse says it's 25,600 on my pc an it's super fast then I type 25600 on my xim an the sens doesn't feel any different which has been annoying me recently cause I can't copy anyone's config cause all of them feel extremely slow. Do you mean I should use 800 dpi on my mouse an 25600 on my xim? I'm super confused sorry. I have a logitech hero g05 or something like that btw
@@Maddux6969 Thats an indication that your mouse doesnt run on that profile. With Logitech mice you need to use the Logitech Onboard Memory Manager software to save your DPI changes onto the mouse memory itself. Only that way the DPI value will carry over to the XIM.
@@XIMCentral that fixed it thanks alot I feel alot better
What are the best curves for r6 and best dpi also what is the difference between ballistic curve and the aim curves under you hip and ads sens
Hey, i have answered all of that in my Matrix R6 Config video. You can find it on this channel! ;)
please add xim matrix confing
game valorant for console
That should be out soon! :)
Add confing for valorant
Should come very soon!
Hey how can i rid shake aim In R6 ???
Hey, use more DPI on your mouse + XIM DPI value, reduce your overall sensitivity, add smoothing and lower your polling rate. All of those will help with that. Especially smoothing.
How many dpi In xim Matrix is good? And how many dpi on mouse is good???????
@@b52flikedyou36 8000-12000 is ideal and use the same value for both. Make sure to save your mouse DPI changes onto the mouse memory or else your DPI changes wont carry over to the XIM!
@@XIMCentral how can i save ot on mouse memory? I have logetich g502
@@b52flikedyou36 Download the Logitech Onboard Memory Manager software from the Logitech website and use that one. Not GHub or something like that.
I use 10k dpi so i'm gonna have fun sorting that out if i ever go back to it lol
This works with any DPI value. The new XIM sensitivity is DPI independent.
@@XIMCentral For sure check it on alt dont want to get my main banned lol
So why is sens slow at 20
Lower value = faster and higher value = slower. If that doesnt work for you then your mouse doesnt run on the DPI value you have specified in your XIM config.
My xim matrix is blinking white, what do i do
This means it cannot connect to your console. What platform are you on?
@@XIMCentral xbox series s
@@Vertbands Have you connected an original Xbox controller to port 3 of your XIM Matrix? And did you setup your config to be "Xbox/PS4" in the connection settings?
@@XIMCentral Yes i done all that i even bought new cables to see if it was the cable and a new controller
@@Vertbands Can you check back with this guide here? Does it work then? cloud.xim.tech/Beta/Guide/Gaming-On-Xbox/
Xim on siege is cooked guys time to go back roller!
ikr
Just use analog movement and SAB. If you know what to do you can get away with SAB values as low as 0-20. Thats barely noticeable. I think im using 20-10-0 or something like that, maybe even less.
Eventually will get trapped...
Xim matrix is now useless
@@misho51284 yep get fck'd kekekeke
@@misho51284 Its not, its just useless if you dont understand how to use SAB.
valorant please
Hmm. My ADS came up 21.75, but i can only use 21.5 or 22, wich should i use?
the fastest always
What are the things that reduce the delay in the matrix?
The polling rate you mean?
@@XIMCentral I mean what are the things that reduce the delay in the matrix in general?
@@aboateeq9092 Only the polling rate. Any additional delay doesnt come from the Matrix then. At 1000Hz you have 1 millisecond of added delay.
I have a question about the new sensitivity cm/360. I used to play on XIM apex Fortnite with a sensitivity of 14 on sync common. On the matrix what would be the cm/360 to 14 hip sensitivity on apex. I play on 3600 dpi
Hey, there is no conversion formula between the two. You would need to take a ruler and measure your cm/360° with the XIM Apex to then transfer that value to XIM Matrix.
Anyone having problems with manager ? Or just me😅
What problems do you mean?
@@XIMCentral I’ll try to open it but just load and load
@@djosu13mara98 Did you press the button on the XIM so it starts searching for your manager?
I would like to obtain the config for version 1.2 of Overwatch1. How can I do this?
See my Competitive Apex Legends Config video on what you must do. You need to switch your XIMMR file.
@@XIMCentral In the first place, does ow1 1.2config exist in MATRIX?
@@user-oc7ch1yx5s If the ST is older than the XIM Matrix launch then you cannot use it with XIM Matrix.
Here me out maybe just maybe use a controller or just buy a pc n play on that
Matrix also supports controllers!
Valorant xim ban😭😭😭
Just use SAB and you will be fine! :)
@@XIMCentral how much？
@@hatarakeyo Its different for every player. Watch my SAB Guide video or read the SAB Guide in the XIM Forum for more infos! :)
First
Try watching the full video first then say that. Also you're not "first" since XIMCentral has already commented 9 minutes before you XD