Nissan Altima front wheel bearing replacement
Вставка
- Опубліковано 18 лют 2021
- 2016 Nissan Altima front wheel bearing replacement
Amazon Links to my commonly used tools:
My test light: amzn.to/2VCYpak
My scan tool: amzn.to/3JCxrD2
My little scan tool: amzn.to/3H2bWtt
TPMS scan tool: amzn.to/35aYLJN
Tire Machines: amzn.to/2R4mYu6
Torx Socket Set: amzn.to/3By4pSa
Hub Buster: amzn.to/3sXGBU5
Torque Wrench: amzn.to/3scOMg9
Bench Vice: amzn.to/3sTtDXf
Plastic trim tool set: amzn.to/3v3Xy1t
LED magnetic light: amzn.to/3p1q00t
MUST HAVE for coolant work https: amzn.to/3oYinI8 - Авто та транспорт
You did real invormative cut and dry demonstration. I do this shit all the time. That was prob one of the best wheel bearing videos ive seen. It was nice to watch somebody actually do it calmly and effectively bc nobody learns anything all pissed off.
Thanks!
My first thought was I bet this will take me longer and require a few choice words to get it done.
LOL, ill let ya know how my 2015 goes this next week. Good advice!
Awesome video. Bet you 95% of mechanics out there don't clean shitt before the new part goes in. Thank you for the great quality video.
Thank you for the video! Just wrapped up replacing mine on a 2015 Altima. Took me quite a bit longer, but that's on me and being a novice, as well as a stubborn 22mm and nearly fused bearing/hub unit. Runs smooth as butter now. Thanks again!
Nice job, lighting and work!!! Thanks
Thanks for calling out the head sizes, much appreciated 🙏
I'm working on getting better at that!
Thanks
Great teacher
And there we have it.. Simple!! Thank You!!!
God bless you for calling out all the sizes
awesome video! you are very talented and made it look easy, and i think i will try it myself
Thanks!
Great to c u using the Milwaukee ratchet!! So many vids I wanted to suggest it. But I already overstepped when I suggested WD-40 for connectors.
I've slowly been switching over to Milwaukee as my DeWalt stuff is dying off.
Thanks for video! Very helpful. All please be aware there is a top and bottom of the wheel bearing. Two top holes allow for the installation of the wheel sensor. If you look at the bearing, you will see what I am talking about. If you have it upside down, the sensor will not go back in. I had to take it back off and flip it around. Not a huge deal, but a little more time!
Did your abs light came on when installed incorrectly?
Torque specs on hub bearing bolts?
Spot on man, thanks
Thank you sir! Now wish me luck.
Awesome video! But you did forget to mention to line up for the ABS sensor
Nice video. Thank you!
Thank you too!
Nice job
Great video
I usually do my work on my car but I was waiting til my dad came to visit to assist with my bearing replacement. Thanks to your video I’m about to go tackle it myself.
Great to hear!
Awesome!
Your so awesome!!!
Hi, i hit a pothole with my 2020 altima and now the front left wheel bearing started to make humming. i can barley hear it, so i wonder if it the same procedure as it in the video
cheers!
Excellent video. You should note to be careful to make sure as you're installing the bearing that the wheel sensor fits back in before bolting everything down. You can install it incorrectly and the sensor won't fit.
This is exactly the problem I'm having. So your saying first install the sensor before installing and tighting up the bolts.
What did I do wrong?
If you look in the back of the hub assembly it has 3 “windows”. One points to 6 o’clock and the other two go up to the right and left. That’s for the sensor to fit into. If installed upside down the sensor won’t have a window to go in
Great Video, the issue I'm having is reinstalling the speed sensor cable, it won't go in! Does it need to be align with installing the hub? I didn't see this in the video. Any thoughts
Your window on your wheel bearing probably isn’t aligned right. Might have to clock it or flip your wheel bearing 180 degrees.
Good job but only torque specs for axle nut was mentioned.
You don't have to press these in? I have a 17 altima I think it's got a bad bearing.
I assumed it would have been a pressed wheel bearing. But I sure didn't complain when I saw it was a bolt in hub!
Would like to know approximate time (for shade tree mechanic) to do this in the drive way.
Probably an hour or so if all goes well.
Did you have to reset Warning light.. skid light.. ABS light.. and Malfunction light? All these lights came on when my wheel bearing was changed! Can anyone tell me what he did wrong and how to get these lights off🤦🏽♀️🤷🏽♀️
The lights shut off on their own as long as there isn’t a fault present. If your lights are on, they likely didn’t hook up the abs sensor wire properly and the signal is missing.
@@Tomsfoolery. Thank you so much for the reply. He said he didn’t have to touch the speed sensor bcuz its in the back but NOW its not reading after he put on the wheel bearing. Could that be true? Mines is a 2015 btw.
@@virgovixen22 he probably broke the abs/wheel speed sensor.
@@jmathis3 Thanks and Ur Right!! HE DID!🤦🏽♀️
@@virgovixen22 So I'm assuming yours was a press in style bearing. If the sensor was reading fine before the bearing installation, it's likely the bearing was pressed in with the tone ring facing the wrong direction. Using a small screwdriver you can lightly touch each side of the bearing and feel for a magnetic feeling. That's the side with the tone ring. The tone ring must always be facing the speed sensor.
You made that look too easy, ha ha.
Thanks! It wasn't too bad compared to some I've had to deal with!
A
Wholeheartedly agreed!!
Do a better job of verbally explaining.
I’ll work on that, I apologize!
I changed my front hub and now I'm getting this noise wth what the heck did I do wrong?
drive.google.com/file/d/1GzIgbhWApxlR_6CrZ3FTNnPNHqNM7gyI/view?usp=sharing