XUAV Talon Pro - Maiden

Поділитися
Вставка
  • Опубліковано 13 вер 2024
  • XUAV Talon Pro Maiden. Very efficient, under 4A minimum cruise current. CG at 65mm is the most rearward I would recommend. Might be safer at 60mm. More stable with extra weight of 2 x 4S 3300mAH.
    XUAV Talon Pro - bit.ly/34CWBzs
    Minimum weight for factory CG (65mm) - 1200g
    Required 4S 3300 Nanotech Lipo plus 70g of extra nose weight (or DJI Air Unit)
    SunnySky 2216 1300kV with 8x6 prop
    ZOHD 40A ESC
    Turnigy TGY 9018 and Hookll MG servos
    FrSKY 40A current sensor
    Max current draw in the air - 28A
    Talon Pro Manual PDF - www.rcgroups.c...
    Like, Subscribe & Ding the 🔔 - bit.ly/ANsubscribe
    Buy Me a Coffee - www.buymeacoff...
    🔎 More information 🔍
    ► Newton Airlines Uncut - bit.ly/NewtonAi...
    ► Newton Airlines blog - newtonairlines....
    ► Links for my build materials - newtonairlines....
    ► Andrew Newton UA-cam - / andrewnewtonaustralia
    ► My portal - anewton.net
    ► iNav Basics and FAQs - newtonairlines...
    ► All my iNav CLI Dump files - bit.ly/2t2OPz7
    ►My FPV gear - newtonairlines...
    ►Favourite iNav gear
    Matek F405 Wing FCB - bit.ly/2SI3bAv
    iNav GPS - bit.ly/2ERre6w
    Beitian BN-880 GPS - bit.ly/2K7hdHc
    ► Depron Armin Wing build - • Depron wing build
    ► Skyshark P4X spars - www.kitesandfu...
    ► Knauf XPS Hot Wire Foam panels - www.bunnings.c...
    ► GBC EZLOAD laminating film (May be discontinued) - shop.quadient....
    ► Alternative 75 micron laminating film (not tried by me) - www.boundtoimp...
    ► Depron and foam board - My 6mm and 3mm depron came from www.tradewarehouse.com.au But from 2020 it seems they no longer sell proper depron. I have not found another supplier yet.
    🎥 Video Recording Gear 🎤
    In the Field
    ► Onboard camera Mobius C2 - bit.ly/2RLNLLg and RunCam-2-4K-Edition - bit.ly/2X4CE0y
    ► Hatcam Firefly 8S 90º with external mic - bit.ly/2DwAP2V
    ► External Microphone - bit.ly/30SwvDB
    In the Workshop
    ► Wide workbench cam - GoPro HERO7 Black and Firefly 8S 170º - bit.ly/FF8S170
    ► Close up workbench cam - Panasonic Lumix LX10
    ► Audio recording - Rode smartLav+ mic in Samsung A8 - bit.ly/2ZK6GGy
    ► Video Editing in Final Cut Pro X on 27" iMac
    ► All the Action cameras I have reviewed - newtonairlines....
    👌🏽Support this channel 👌🏽
    This is a fun hobby for me, not a money making venture.
    I don't have a Patreon account, and choose the minimum possible advertising option.
    However if you would like to support this channel here are some options
    ►Direct donations to Paypal.Me - paypal.me/apne...
    ►Small donations via BuyMeACoffee - www.buymeacoff...
    ►Affiliate links - BANGGOOD RC - bit.ly/2R7LMgg
    If you use the affiliate link to make a purchase I may receive a commission at no extra cost to you.
    👀 No single review will tell the whole story. Be clever, watch other reviews and shop around before making any purchase.
    #AndrewNewton #TalonPro #XUAV

КОМЕНТАРІ • 137

  • @AeroStuffFPV
    @AeroStuffFPV 3 роки тому +6

    Great FPV platform to carry a huge Li-Ion battery pack for Ultra Long Range FPV. Something like a 6S4P.

  • @tomfalls1006
    @tomfalls1006 3 роки тому +3

    One of your viewers mentioned the poor fitting hatch. Check out 8:15 and you can see the hatch popped up possibly 1 cm? This would create a significant amount of drag and a resultant pitching moment on this very light and low drag plane. If it popped out when you gave it a quick burst of throttle it may account for that quick pitch up! I think the hatch system mod is a must! Great videos as always!

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      Yes I'll ditch the elastic idea

    • @Davyorr
      @Davyorr 3 роки тому +1

      My thoughts exactly. But it’s the rear hatch that’s lifting most.

    • @FPV420.
      @FPV420. Рік тому +1

      @@Davyorr I already lost my rear hatch on the maiden. I saw a great idea of using a servo horn (the dpuble one) as a clamp. I ordered a replaement one and will give this idea a try.

  • @MatthewHeiskell
    @MatthewHeiskell 3 роки тому +1

    Hey Andrew, I've got one on the way. I'm particularly excited about the crazy efficiency! The extra long glide when you're landing is a good sign! Thanks for sharing your knowledge and experience!

    • @AndrewNewton
      @AndrewNewton  3 роки тому +1

      Hope you enjoy it! Fat body is a bit hard to hold on to.

  • @GroundControlRC
    @GroundControlRC 3 роки тому +1

    Congratulations on a very successful Maiden Flight! Fantastic efficiency of the Power System. Love the Glide Profile as well. See you in the Air!

  • @51im
    @51im 3 роки тому +1

    Nice maiden, with lots of useful info. Thanks Andrew. 👍

  • @tekgis
    @tekgis 3 роки тому +1

    Thanks for the video. Lovely slow landing flare characteristics.

  • @reefer2917
    @reefer2917 3 роки тому +1

    Very nice, I'm looking forward to mine arriving soon, the Fat Soldier! great vid Andrew

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      It is a chubby little fellow, but efficient

  • @madsloper
    @madsloper 3 роки тому +1

    Nice build and looks very efficient. I have the original MT and it tucks like yours when put in a dive under power (65+ mph). It's the v-tail ruddervators flexing under load, throttle back and you regain elevator authority. Happy Flying!

  • @DonDegidio
    @DonDegidio 3 роки тому

    Hi Andrew,
    Happy Holidays to you and Virginia. You make the maiden look so easy. Another winner there. Both of you stay safe.

  • @cabecinha69
    @cabecinha69 3 роки тому +3

    Looks amazing. Thanks

    • @marcocustodio8926
      @marcocustodio8926 3 роки тому +1

      É mesmo lá teremos que mandar vir um..

    • @cabecinha69
      @cabecinha69 3 роки тому

      @@marcocustodio8926 depois deste teste, um dia vai mesmo ter de ser

    • @marcocustodio8926
      @marcocustodio8926 3 роки тому +1

      @@cabecinha69 Não te esqueças de mim..

  • @Hakinank
    @Hakinank 3 роки тому +1

    A big fuselage with lots of drag and kind of a soft foam material... I guess I'll pass this model (maybe design purpose is distant to me ) but your videos are awesome as always. Thanks for the objective, detailed review.

  • @dooleycurl6276
    @dooleycurl6276 3 роки тому +1

    At 2:15 you said "Holy Dooley" !!! That is sooo funny

    • @AndrewNewton
      @AndrewNewton  3 роки тому +1

      Ha, I'll say Hurley Curley next time

  • @YuvalPalomo
    @YuvalPalomo 3 роки тому +1

    Excellent review. Thank you 😌 .

  • @flightlieutenant6902
    @flightlieutenant6902 3 роки тому

    Merry Christmas Andrew and Happy New Year too . Many Thanks for your great videos.

  • @jozef4511
    @jozef4511 3 роки тому +1

    Would love to see the comparison.. looks a great bird.. 👍

  • @EnglishTurbines
    @EnglishTurbines 3 роки тому +2

    Looked rather pitchy, I'm guessing motor thrust angle might help a bit...The streamlined Fuz is paying dividends and obvious weight carrying ability. No provision for fpv camera though?... Needs more flying to get to grips with it...Maybe a FC will help keep things level using Horizon Mode or Alt Hold perhaps... Certainly looking forward to seeing it fly with a Flight Control board...Well done Andrew, thought you were going to stuff it more than once TBH....lol...🤔😀🇬🇧

    • @AndrewNewton
      @AndrewNewton  3 роки тому +1

      I did surprise me a few times with a dip or pitch up. Turbulence, flex or CG, not sure yet.

    • @EnglishTurbines
      @EnglishTurbines 3 роки тому

      @@AndrewNewton Yes, I think it still hasn't shown itself fully yet. Dont let your guard down just yet.....lol..

  • @Crunklefloop
    @Crunklefloop 3 роки тому +2

    I love the original Mini Talon however this one looks like the answer to a question nobody asked. That said, the Mini Talon is only as great as it is due to the huge amount of research into modifications to improve it so the same may well happen with the Talon Pro too, time will tell.

  • @dronepilot260rc
    @dronepilot260rc Рік тому

    I finally broke down and bought one 🎉. Now I’ve had every talon except the original Talon lol

    • @AndrewNewton
      @AndrewNewton  Рік тому +1

      Which do you like the best? Mini Talon for me.

    • @Rapsaj
      @Rapsaj Рік тому +1

      @Drone Pilot 260 RC
      I’m considering getting one. Would you recommend it?

    • @dronepilot260rc
      @dronepilot260rc Рік тому

      @@AndrewNewton my mini talon was great but it got stolen after I was forced to crash land when a servo went out. Lesson learned I used 17g servos in this one. I think I like the Nano Talon Evo the best mainly because it’s easy to transport and I can fly it from almost anywhere and land it almost anywhere.

    • @dronepilot260rc
      @dronepilot260rc Рік тому

      @@Rapsaj if you like long range flying I would suggest this as its very efficient but if you just like to park fly or close range, I’d recommend the nano talon evo

  • @k1ortia
    @k1ortia 3 роки тому +1

    i was thinking about getting this for an fpv platform, but decided not to once i had sen it. Its got to be the most unfriendly fpv designed plane iv seen. No specific cut outs or areas to mount camera,s ect. At least with the old Talon it was set up for fpv with dedicated areas.

    • @JaviRP97
      @JaviRP97 3 роки тому

      I guess, by seeing it, it is more oriented to be an autonomous UAV platform. No predefined cut outs, you may modify it exactly to your needs.

    • @k1ortia
      @k1ortia 3 роки тому

      @@JaviRP97 yes i agree. I know it can obviously be modified in any way you see fit, its just not what i would call fpv ready or friendly. But as you mentioned, 100% a brilliant autonomous craft with a large cargo area for batteries and kit, and a great looking streamlined fuselage.

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      They really should have at least moulded in some cut lines for camera hatches

    • @k1ortia
      @k1ortia 3 роки тому

      @@AndrewNewton Definitely. 100%. Hopefully they,ll listen and the 3rd Version will be a vast improvement..

  • @BrainDeadEngineering
    @BrainDeadEngineering 3 роки тому +2

    Nice . I was thinking when I seen it , the tail fuselage is so so short ! Cause Pitchy characteristics?

  • @aviphysics
    @aviphysics 3 роки тому +3

    Would be good to see GPS speed vs Amps.

  • @CP_FPV
    @CP_FPV 3 роки тому +1

    I remember the FX79 had that high speed dive of death. I can’t quite remember what it was caused from but I think it was either Wing flex or Aileron flex

    • @alphaadhito
      @alphaadhito 3 роки тому

      If I remember correctly it's the Aileron that flexing at high speed

    • @iforce2d
      @iforce2d 3 роки тому

      I seem to recall it was both, in a way. I concluded it was the wing flexing, which was interfering with elevon movement somehow. Placing a spar in the wing along the section where the elevons are reduced the problem to almost nothing.

    • @CP_FPV
      @CP_FPV 3 роки тому

      @@iforce2d the video u made about it was great. I also noticed it about 5 years ago as my brother bought the FX79 and I flew it a few times. I ended up gluing in some aluminium spars the whole length of the wings. I never really did further testing of the dive but it still had the wing bounce. Then the motor mount broke and a servo died, since then I lost interest in it and it’s been collecting dust ever since 😂 moved onto other models

  • @dronepilot260rc
    @dronepilot260rc 3 роки тому +1

    Sweet I was just watching the aggressor flight then this comes up lol

  • @KashifJarwar
    @KashifJarwar 3 роки тому

    I am Your BIG fan from Pakistan.

  • @MrVasmikey
    @MrVasmikey 3 роки тому +2

    Looks like a Blimp with wings.

  • @archivist17
    @archivist17 3 роки тому +1

    Interesting flight. Would make a pretty good FPV platform, but doesn't have decent mounting points or cut outs.

    • @grim-upnorth
      @grim-upnorth 3 роки тому +1

      In stock form, this absolutely would not make a good FPV platform. This needs extensive modification to be anywhere near suitable for FPV, at which point all the efficiency of the super sleek fuselage and nose section will be completely undone. You're better off with a standard Mini Talon, or if you don't want to do ANY modification to an airframe, the Talon GT

  • @murdockfpv5397
    @murdockfpv5397 3 роки тому +2

    Quiet for a pusher

  • @fawazahmadtorbelal599
    @fawazahmadtorbelal599 3 роки тому +1

    Welldone.

  • @vb748
    @vb748 3 роки тому +1

    It was fast, I mean creating new video, thank you! Are you thinking to add flaps?

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      I dont think flaps would suit this style of plane, too short and pitchy

  • @rustyxquad4609
    @rustyxquad4609 3 роки тому +1

    Hatch appears to be moving up and down by 1cm which could be affecting trim.

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      Could be, it's not ideal anyway. I'll hinge the front of the hatches.

  • @Fjcc1971
    @Fjcc1971 3 роки тому +1

    Amazing ! Big like

  • @pilotimodele4598
    @pilotimodele4598 3 роки тому +2

    👏👏👏...👍

  • @davidhomewood3315
    @davidhomewood3315 3 роки тому +1

    HI ANDREW - PLEASE EXCUSE THE CAPS - BUT I AM PARTIALLY SIGHTED - AN OLD SCHOOL FLYER - BUT JUST GETTING BACK INTO THIS AS I AM TEACHING - LOVE YOUR SIGHT BECAUSE IT'S A BIT MORE DOWN TO EARTH - AND EASIER TO UNDERSTAND - AND I LIKE SEEING PEOPLE FLYING PLANES AND EXPLAINING WHAT'S GOING ON - I DO UNDERSTAND 90 % OF WHAT YOU ARE DOING WITH FPV - FLIGHT CONTROLLERS AND PLANES - SO PERHAPS YOU CAN HELP ?? - MOST OF THE PLANES NOW HAVE 2 SERVOS IN WINGS FOR AILERONS - BUT FLIGHT CONTROLLERS - GYROS ETC ONLY SEEM TO HAVE ONE AILERON OUTPUT - SO DO YOU INSTALL WITH A "Y" LEAD ??? - I HAVE JUST ORDERED A ZOHD COPILOT LITE AFTER WATCHING YOUR REVIEW - AGAIN THIS UNIT ONLY HAS ONE AILERON OUTPUT - SO DID YOU PUT IN A "Y" LEAD - YOU ARE SUCH A LUCKY MAN WITH YOUR FLYING SITE - IT'S HUGE !!! - WE HAVE TO PUT UP WITH A COUPLE OF FOOTBALL PITCHES - ANYWAY BIG THANKS FOR YOUR SITE - AS I HAVE SAID REALLY LIKE IT
    NEXT QUESTION - WHICH PLANE WOULD YOU RECOMEND AS FIRST FPV / FLIGHT CONTROLLER - GO WITH A 2 SERVO WING - AGGRESSOR - OR MORE CONVENTIONAL 2 SERVO WING WITH A V TAIL - TALON TYPE - I CAN STILL FLY ANYTHING - SO I DON'T HAVE TO WORRY - BUT FOR MY STUDENTS - ALSO - DO YOU HAVE AN E-MAIL ADDRESS - AS MIGHT BE EASIEST WAY OF US TALKING ??? - THANKS SO MUCH - REGARDS DAVID BRIAN HOMEWOOD - UK

    • @northernfpv9562
      @northernfpv9562 3 роки тому

      HI DAVID, I’D STRONGLY RECOMMEND YOU JOIN ONE OF THE MANY FPV GROUPS WITH TONS OF UK MEMBERS. “FIXED WING RC REBELS” IS ONE OF THEM. THEY WILL BE HAPPY TO HELP YOU OUT AND IN GENERAL THE FPV COMMUNITY IS VERY FRIENDLY TO NEWBIES BECAUSE THE LEARNING CURVE CAN BE STEEP! AS FOR A FIRST FOV PLANE, I WOULD RECOMMEND SOMETHING EASY LIKE A HOBBYKING BIXLER CONVENTIONAL PUSHERS OF THAT STYLE ARE EASY TO LAUNCH AND BEHAVE LIKE GLIDERS - NOT TOO FAST AND EASY TO HANDLE IN A SMALLER SPACE. BEST OF LUCK!

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      Yes you are right, Y Lead is how you connect 2 ailerons to 1 flight control board output. As Northern FPV said, something like a Bixler 2 is best to start with FCBs. Email address is in the About page on this site.

  • @The_Pub_
    @The_Pub_ 3 роки тому +1

    V2 with V-Tail.... Wasn't made in Germany, was it??
    I agree, more than likely too short between wing & fins. ((Plus some loose clothing))
    Yeah right, Gym,,, Who did ya have to pick up??
    Merry Christmas and New Year Andrew...

    • @AndrewNewton
      @AndrewNewton  3 роки тому +1

      Haha, same to you Bruce. Gym wasn't open!

  • @typxxilps
    @typxxilps 3 роки тому

    looks like a great slope soarer too I guess . Seems to be efficient as a wing with the big body.
    Appears more and more appealing ... but I can not wait to see you talking about it in 6 months looking back on your planes of the past and those still in the hangar.
    Wonder if the Ranger 1600 is still there and what by the way are the planes you have for the longest time ?

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      Still have the Ranger 1600, will never tire of it.

  • @fellpower
    @fellpower 3 роки тому

    Andrew seems to live on the other side of the planet - because here, the weather is soooo bad ;)

  • @alexglikman8629
    @alexglikman8629 3 роки тому +1

    Looks like previos mini talon :) but little better :)

  • @RobisonRacing68
    @RobisonRacing68 3 роки тому

    Its a winner!!!!!!!!!!

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      Yes it has great potential. Uploaded photos of the manual here - www.rcgroups.com/forums/showthread.php?3771535-X-uav-Talon-Pro-The-new-redefined-Talon/page3#post46180187

  • @cammo3876
    @cammo3876 3 роки тому

    Nice flight Andrew
    Still a little too big but obviously it works 👌

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      Need big hands to throw this one but it is very efficient

  • @heyjackfpv5469
    @heyjackfpv5469 3 роки тому +2

    great review, as usual . do you think it would fly ok with a sunnysky 2216 1250 kv and a 8x6 pusher prop?

  • @bomberaustychunksbruv4119
    @bomberaustychunksbruv4119 3 роки тому +3

    Not impressed. That hatch sticking up and elastic is a fail. Softer foam and no front end mounts. Might give it a miss.

  • @longrangefpv
    @longrangefpv 3 роки тому

    Looks good plane for fpv. Maybe some diff on the ailerons would help? (more up and less down)

  • @nadeemimran6295
    @nadeemimran6295 3 роки тому +1

    Hard to see in the air on video good for only fpv ?

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      Would be OK with more colour, but it is intended for FPV

  • @dronepilot260rc
    @dronepilot260rc Рік тому

    I noticed mine lands similar to yours even with 2 x 5200 3s lipos haha I might add flapperons to this one haha 😂 independent ailerons it is I guess haha 😂

  • @AnthonyGonzalez-lw1ek
    @AnthonyGonzalez-lw1ek Рік тому

    Hi Andrew super glad you did this review question will it Slope Soar ? Same with the dolphin

  • @big5astra
    @big5astra 3 роки тому

    Hi Andrew, nice maiden and maybe check the tip-stall characteristics next time. Cheers.

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      Will do, but I'm betting it will be well behaved

    • @blackterminal
      @blackterminal 3 роки тому

      @@AndrewNewton my original full size Talon was terrible for tip stalling. I hope this is better

  • @prep0wer
    @prep0wer 3 роки тому +1

    very guppy

    • @prep0wer
      @prep0wer 3 роки тому

      interestingengineering.com/meet-the-guppy-and-the-largest-aircraft-in-the-world

  • @FPV420.
    @FPV420. Рік тому

    Hi Andrew, I am a bit late to the party with Talon Pro but hey I got it. Now I am thinking about motor options for mid-long range like 10kms. and I have a DYS 3542 1450KV. Do you reckon this motor will do on 4S? Thank you.

    • @AndrewNewton
      @AndrewNewton  Рік тому +1

      Motor is bigger than needed but will work fine with an 8x4" prop on 4S. Me and others have used Sunnysky 2216 1250kV but it would work with just about anything.

  • @GeorgeGuerov
    @GeorgeGuerov 3 роки тому

    Thanks for the great review. I'll pass on this one. Looks like the wings are fluttering a lot. Suppose the soft foam doesn't help either. Maybe you can cover the wings with a foil?!?

    • @AndrewNewton
      @AndrewNewton  3 роки тому +1

      Flutter was the elastic band vibrating, it was also making the droning noise

  • @pawlovpaulnikov8068
    @pawlovpaulnikov8068 2 роки тому

    ... hmmm, ... the "dipping", ... maybe it's the angle between the wings and tailfins, I think you call it "angle of incidence", in German it's called "Einstellwinkeldifferenz" 😊, shortly "EWD" ... ?

    • @AndrewNewton
      @AndrewNewton  2 роки тому

      Could be EWD or motor thrust angle

  • @stevietee10
    @stevietee10 3 роки тому

    it looks like a missile with wings :-)

  • @Glenn.J
    @Glenn.J 3 роки тому

    Andrew can we request you show how you cut out the hatch on the front of the original mini talon please?

    • @AndrewNewton
      @AndrewNewton  3 роки тому +2

      Coming soon, I have cut out the nose hatch. Best to do it before joining the fuselage halves

  • @andrewjamez
    @andrewjamez 11 місяців тому

    Hi there, where have you found the best c of g % on thd talon type aircraft? I have built a small 900mm talon with ch at 25% and its pitch is heavy, porposing and barly controllable. Am thinking its nose heavy but 25% should be that bad..

    • @AndrewNewton
      @AndrewNewton  11 місяців тому

      This might help ua-cam.com/video/fpJK7JRbPO0/v-deo.html

  • @brkfpv60
    @brkfpv60 3 роки тому +1

    Big fusalege but small wings !if only min wing size 150cm

  • @WinstonSmith1984
    @WinstonSmith1984 3 роки тому

    If ZOHD had designed it, then it would probably have denser foam, magnetic hatches, and other nifty things.

    • @AndrewNewton
      @AndrewNewton  3 роки тому

      Yes, it would have been much more expensive but a more complete design

    • @jamesordwayultralightpilot
      @jamesordwayultralightpilot 3 роки тому

      I've noticed Zohd planes are competing with Horizon prices these days

  • @Stinngerr
    @Stinngerr 3 роки тому

    So much space in it, and they recommend 4s 3300mah? I load my mini talon with 4s 12A battery and dji air unit and it flies :) This one I think should fit around 4s 20A battery?

    • @cheetahfpv6476
      @cheetahfpv6476 3 роки тому

      Maybe, if you put part of the battery in the fc compartment to balance it out haha

    • @grim-upnorth
      @grim-upnorth 3 роки тому

      Yep, I very rarely flew my Mini talon with anything less than 8Ah 4S and it was perfectly fine, ok... so it comes in a bit hot on landing but once up to speed the thing just pootles around under 4 amps and gobbles up the miles

    • @AndrewNewton
      @AndrewNewton  3 роки тому +1

      Yes it will carry whatever you load into it, but laminating would be essential

  • @FPV420.
    @FPV420. Рік тому

    Howdy, I got the Talon and on the maiden flight I lost the rear hatch. Anyone knows if replacement parts are sold anywhere?

    • @AndrewNewton
      @AndrewNewton  Рік тому

      Might have to look for a 3d printed one

  • @blackterminal
    @blackterminal 3 роки тому

    Do the upturned wing tips make it less susceptible to tip stall?

  • @unixoid23
    @unixoid23 3 роки тому

    max speed?

  • @yaroslavsadovy9012
    @yaroslavsadovy9012 2 роки тому

    Very nice plane. Fully destroyed my Talon's in many attempt to made it fly. It's always lean to the left and fall as result. Don't understand why. Surface control is correct, engine trust is 2X of weight, geometry is ok e.t.c. But always same story.....

    • @AndrewNewton
      @AndrewNewton  2 роки тому

      Very odd! Mine have been easy to launch and fly, but they are light weight

    • @yaroslavsadovy9012
      @yaroslavsadovy9012 2 роки тому

      @@AndrewNewton Mine is 1700 g. Engine thrust is 2700. I thought maybe it's contre rotation from too powerful engine. Tried to fly with 900 g thrust - same issue. Even on autolaunch - same issue. Weird. Other wings I have , fly normally.

    • @dronepilot260rc
      @dronepilot260rc Рік тому

      @@yaroslavsadovy9012 what’s your motor / prop setup?

    • @jeremygalloway1348
      @jeremygalloway1348 Рік тому

      Bad servo?

  • @NoFlyDrone
    @NoFlyDrone 3 роки тому +1

    Anyone else feel XUAV screwed the pooch on this one? A little too late? And all the "hype" with this thing for months and now finally we're seeing proper flights... The plane just seems meh.... You would think they would "modernize" the new one and make it more FPV friendly and integrate some of the common mods (Mark Q stuff). But still in 2020 this plane seems like it was made before modern FPV equipment existed.

    • @eNau-tilus
      @eNau-tilus 3 роки тому +3

      Especially when you see options like the AR Wing Pro that have so many user friendly features that keep today's FPVers in mind. This is a refresh and nothing more.

    • @Afiso
      @Afiso 3 роки тому +2

      @@eNau-tilus I'm so glad I bought the AR Wing PRo, going to by one extra but then the Kit version. One long range and one for speed!

  • @Sergei75000
    @Sergei75000 3 роки тому

    It looks to flying bomb , be careful with the news laws about drones in 2021 😁

  • @choppergirl
    @choppergirl 3 роки тому +1

    Lol... at trim it down a bit... beeeeppp beep beepp beepp beepp... maximum trim rate.
    This looks a lot more sexy aerodynamic than the ZOHD DART... for example... but not as aerodynamic as a flying wing.
    Looks kind of like a V1 Flying Bomb

    • @AndrewNewton
      @AndrewNewton  3 роки тому +1

      Trim it all the way! Land and trim some more!