Pro Tip: I’ve done many epoxy jobs with flakes and you want to throw the flakes in a upward motion. Close your hand with a handful of flakes and when throwing them up fully open your hand and throw them up close toward the ceiling. When they drop it’ll apply perfectly. Do not throw across or straight down at they will clump together. This looks great and a phenomenal transformation!
@@TNAWWE Absolutely, tip isn’t for them as they turn out amazing results. The tip is for the normal DIY’er who hasn’t done this before. I’ve made the mistake early on and was disappointed with the result throwing down or straight out and wanted to help others as life is too short to not learn from others.
I did my 16 foot about 10 years ago with leftover garage epoxy really fast and am downright shocked how easy it is to clean. Easy to sweep or hose out. Very little seams for about 30$ of leftover epoxy. Was cheaper than painting w primer
I agree. I shut it off half way through. Would have been good informational video with NO music. A voice over lay explain what he was doing would have been helpful.
I love this video! It makes me feel like I can take on this epoxy project! Suggestion: perhaps add comments on the bottom of the screen saying what each step is and time to let cure? I do have a few questions: 1. What are you using in the first step at the seams and filling the holes? 2. What’s the lowest temperature you can do this? Thanks!!
They didn't record the scraping and vacuuming of the floor. After flaking the floor, scrape it, vacuum it (electric leaf blow it off) and then do the top coat.
@@judichristopher4604 I have had it on for about a year now, just don’t put the little paint chips on and it will be all good…. The paint chips make it harder to clean and they also chip off and make a mess
@@judichristopher4604 I didn’t use any sealer, just the epoxy and you sprinkle the paint chips on top of the epoxy when it’s wet. I’m still happy with it. I don’t think you would need a sealer it you didn’t use the paint chips, but that would be all up to you.
It really doesn't add too much height, especially depending on how thick you apply the product. Typically this process includes an epoxy coat, the flakes(which you scrape off the excess), and then a topcoat, so nothing too crazy.
I know that's the flake floor kit, but can someone confirm which color that is? Did it also include the grit in the topcoat? I'm looking to do my brand new 7'x14' trailer exactly like this.
What has the thickness have to do if it will stick or not? It is wood... It will stick... ... OH TREATED Plywood... Hum good question!! IF you can PAINT Treated Plywood, which I think you can... Right then you can do this application too... (smile)
leg prods: you should CAPTION EACH STEP so that the viewer is informed about the process and if a person uses anything that contains ANY type of solvent, that person should be wearing a respirator to maintain the health of the brain cells that they might still possess.
Looked great, want to share side affects, some epoxy’s will make you as high as a kite, two painter doing a bath room wound up beating each other up, took them outside sobered up in a minute went back in finished job no problems, did a kitchen for a lady, she watched started coming on to me, took he out to the garage she sobered up in a minute and left, her dad came over and wanted to know what was going on, told him I was doing epoxy and he left no problem. Was doing another kitchen with two painters, stoped by as they had just started home owner came in while we were putting it on, talked with each other like we were old drinking buddies in a bar, took him outside and apologized and told him to tell his wife I was sorry. Make sure you have proper ventilation.
this is a bad "how to" video but maybe it's not meant to be anything more than a "this is what we did and if you want instructions and tips, you're in the wrong place"?
Hello! Although we might not include every step of our installation process on youtube for the sake of time, we do include full, in-depth tutorials with every Leggari Products purchase to ensure every DIY'er has what they need for a successful project. Thank you for watching!
Pro Tip: I’ve done many epoxy jobs with flakes and you want to throw the flakes in a upward motion. Close your hand with a handful of flakes and when throwing them up fully open your hand and throw them up close toward the ceiling. When they drop it’ll apply perfectly. Do not throw across or straight down at they will clump together. This looks great and a phenomenal transformation!
yeah bc these guys are amateurs right
@@TNAWWE Definitely not, just sharing my experience to help others. Good luck on your projects.
@@inspiringbuilds i understand, no biggie. but these guys are pro's themselves, i mean all they do is epoxy jobs lol.
@@TNAWWE Absolutely, tip isn’t for them as they turn out amazing results. The tip is for the normal DIY’er who hasn’t done this before. I’ve made the mistake early on and was disappointed with the result throwing down or straight out and wanted to help others as life is too short to not learn from others.
@lbialk Very true. 👍🏼
I did my 16 foot about 10 years ago with leftover garage epoxy really fast and am downright shocked how easy it is to clean. Easy to sweep or hose out. Very little seams for about 30$ of leftover epoxy. Was cheaper than painting w primer
It drives me crazy when they dont talk about what they are doing and why..... Stone Coat Counter Tops beats them there....FRUSTRATING
The video is free to watch
I agree. I shut it off half way through. Would have been good informational video with NO music. A voice over lay explain what he was doing would have been helpful.
Its all the same process sealer , coat , clear , hardner ... dont over think it ...
Buy the products and you get access to some great step by step videos. Their products are as user friendly as they look.
@@BillyOnUA-cam
"AMEN Brother... Amen"
Those 2 spots in the middle of the floor he keeps missing is fucking with my OCD ... real badd !!!
BAHAHAHAHAHA... I was thinking the same thing... except I knew he would get it eventually.... which he did... Right? He did didn't he? LOL
I love this video! It makes me feel like I can take on this epoxy project! Suggestion: perhaps add comments on the bottom of the screen saying what each step is and time to let cure?
I do have a few questions: 1. What are you using in the first step at the seams and filling the holes? 2. What’s the lowest temperature you can do this?
Thanks!!
I agree... This apparently is not a "How To" video... but love watching it...
So Relaxing... ASMR.
Turned out so BEAUTIFUL...
"BRAVO"
Thank you!🙌
I’d like to see it a year later.
Dude. Soccer cleats while applying the epoxy? Big brain
YES... YOU have to have some kind of Cleats to do the application... I thought that was very smart of him...
That looks great! Is the epoxy actually flexible enough to handle the stress of the wood flexing while loading, unloading and driving around?
It’s reported to with a lifetime warranty. Read my pro tip regarding the flakes if you do this project. Have a great day!
OOOOHHHH that is a great question!!!
I am watching this video because I want to do this to my Big Vintage RV...
I love the practicality in that Product, it stands alone in quality without even mentioning all the Beautiful options available. 💖
a trick: watch movies on flixzone. Me and my gf have been using them for watching loads of movies during the lockdown.
@Grady Braylen yup, have been watching on flixzone for years myself :D
@Grady Braylen Yea, have been using flixzone for since november myself :D
If you had to take a piece of the floor up how would you get to the screws since you filled them with a material?
You can't , you're just fucked... Or rip up the entire floor I think this video is leaning me towards vinyl or rubber!!!!!
They didn't show them scrapping the flakes for a smooth surface before applying the top coat, did they do it differently where they didn't need to?
Would this be a good floor to beat off on ???. Easy clean up ??????
Y si el suelo en vez de madera es chapa metálica pegaría igual ?
What happens after you add the flakes and it dries? Do you just clear coat over all the extra loose flake? I am lost
YES... he shows that in the video...
They didn't record the scraping and vacuuming of the floor. After flaking the floor, scrape it, vacuum it (electric leaf blow it off) and then do the top coat.
@@Armor220
YES... That is a STEP that should have been shown...
Thank you for that very important part of this video...
So..How much is the big question to do this job minus the labor of course. Please share
How did it hold up with the flex of the trailer?? Is it cracking at all?
I want to know that answer toooooooooooo
@@judichristopher4604 I have had it on for about a year now, just don’t put the little paint chips on and it will be all good…. The paint chips make it harder to clean and they also chip off and make a mess
@@masterchef2408
How many coats of Sealer did you put on?
You did emurse it with Epoxy... all the chips should be Under the Epoxy.
Right?
@@judichristopher4604 I didn’t use any sealer, just the epoxy and you sprinkle the paint chips on top of the epoxy when it’s wet. I’m still happy with it. I don’t think you would need a sealer it you didn’t use the paint chips, but that would be all up to you.
Watch their other videos they go step by step
Thank you for sharing
Thank you for watching!
That looks amazing I use my 6 x12 for pressure washing is this a good idea. Will it hold up from water leaking on floor?
Would it be an issue if it was done in a bathroom around a toilet?
I’ve put down epoxy flooring in bathrooms. Remove the toilet and it’s an excellent solution and easy to clean.
How does it handle up to cold weather? With a snowmobile and dirtbike, will water be an issue making it slippery to walk on and down the ramp?
Can you guys please answer this. I definitely would love to know as well. Thanks in advance.
The flake itself provides adequate slip resistnace but you can add a product called Back-Track from Elite-Crete for additional slip resitance.
Nice. First flake-coat I've seen somebody do with this brand. Can people still put accent colors with this type of epoxy coating??
How is the floor holding up? I’m building out a 7x14 and wondering what to do with the floor
ASMR
How much height do you think that adds to the trailer looking to possibly do mine.
It really doesn't add too much height, especially depending on how thick you apply the product. Typically this process includes an epoxy coat, the flakes(which you scrape off the excess), and then a topcoat, so nothing too crazy.
I saw 4 liquids go down. And the grout coat was extremely sticky and slow curing.
Absolutely stunning!!
Beautiful!
You really masters guys, congratulations from México!! 🇲🇽
Agreed, turned out great!
I’m wanting to epoxy my she shed, will it crack after installing? Like if the wood were to move?
Awesome looks great
Que bonito trabajo 👍👍👍
Excellent travail 👌🏻
I know that's the flake floor kit, but can someone confirm which color that is? Did it also include the grit in the topcoat? I'm looking to do my brand new 7'x14' trailer exactly like this.
Autumn filter, and yes when you buy your kit you can choose an optional topcoat with or without the grit additive!
Will like to use that clear epoxy straight on a truck wooden floor seee hw it comes
wow🤩😍
Beautiful and done to perfection
Being my floor is 3/4 treated plywood, would it still stick?
What has the thickness have to do if it will stick or not?
It is wood... It will stick... ... OH TREATED Plywood... Hum good question!!
IF you can PAINT Treated Plywood, which I think you can... Right then you can do this application too... (smile)
@@judichristopher4604 Can you paint treated plywood, I don't think the paint would stick.
How about in tiles floors?
Can I do this at my terrace?
Cool
Nice job. Did you have to clean the oil from the wood or just apply over it.
You would want to clean it as much as possible!
@@LeggariProducts how do you clean the oil up? Any tips?
Can I do this in a camper?
Yes, I’ve installed similar product in homes, warehouses, and trailers. Campers would work fine as well.
@@inspiringbuilds
Good to know... Thank YOU.
leg prods: you should CAPTION EACH STEP so that the viewer is informed about the process and if a person uses anything that contains ANY type of solvent, that person should be wearing a respirator to maintain the health of the brain cells that they might still possess.
Thank you
Where is the kit on the website?
Looked great, want to share side affects, some epoxy’s will make you as high as a kite, two painter doing a bath room wound up beating each other up, took them outside sobered up in a minute went back in finished job no problems, did a kitchen for a lady, she watched started coming on to me, took he out to the garage she sobered up in a minute and left, her dad came over and wanted to know what was going on, told him I was doing epoxy and he left no problem. Was doing another kitchen with two painters, stoped by as they had just started home owner came in while we were putting it on, talked with each other like we were old drinking buddies in a bar, took him outside and apologized and told him to tell his wife I was sorry. Make sure you have proper ventilation.
Our epoxy has no harsh smells and is one of the most eco friendly resins on the market!
Cost ??? looks costly
Would you like to do my 7x14’ trailer?
as much flake as this system takes, just dump it all out and run a leaf blower! that would get it EVERYWHERE!
That just might work thanks for watching!
That’s not how you throw flake
💖💖💖💖💖💖
It is fustraiting when they don't put the products or the whole process I meant if I'm looking at it it's because I want to do it.
Looks relly easy, but I know is not!
You can do it, just don’t rush the job. Applications like this just takes good prep work and patience working through the steps.
this is a bad "how to" video but maybe it's not meant to be anything more than a "this is what we did and if you want instructions and tips, you're in the wrong place"?
Hello! Although we might not include every step of our installation process on youtube for the sake of time, we do include full, in-depth tutorials with every Leggari Products purchase to ensure every DIY'er has what they need for a successful project. Thank you for watching!
very expensive product
You pay for what you get, and we are the best! Thanks for watching!
@@LeggariProducts there is always somebody bette. a little humility goes a long way.
Tough to watch
What's the point of this if nobody knows what your doing ????
My adventure with woodworking started with Woodglut.
😎👍🏼👍🏼 @mrwranglerstar